Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Makita CLX305
Summary of Contents for Makita CLX305
- Page 1 INSTRUCTION MANUAL Cordless Hammer Driver Drill HP332D Read before use.
-
Page 2: Specifications
SPECIFICATIONS Model: HP332D Drilling capacities Masonry 8 mm Steel 10 mm Wood 28 mm Fastening capacities Wood screw 5.1 mm x 63 mm Machine screw No load speed High (2) 0 - 1,500 min Low (1) 0 - 450 min Blows per minute High (2) 0 - 22,500 min... - Page 3 When operating a power tool outdoors, use an Maintain power tools. Check for misalignment extension cord suitable for outdoor use. Use of or binding of moving parts, breakage of parts a cord suitable for outdoor use reduces the risk of and any other condition that may affect the electric shock.
-
Page 4: Tips For Maintaining Maximum Battery Life
MISUSE or failure to follow the safety causing fires, personal injury and damage. It will rules stated in this instruction manual may cause also void the Makita warranty for the Makita tool and serious personal injury. charger. Important safety instructions for... -
Page 5: Functional Description
Battery protection system FUNCTIONAL DESCRIPTION The tool is equipped with a battery protection system. This system automatically cuts off power to the motor to extend battery life. CAUTION: The tool will automatically stop during operation if the Always be sure that the tool is tool and/or battery are placed under one of the following switched off and the battery cartridge is removed conditions:... -
Page 6: Switch Action
Switch action Reversing switch action ► 1 . Switch trigger ► 1 . Reversing switch lever CAUTION: CAUTION: Before installing the battery car- Always check the direction of tridge into the tool, always check to see that the rotation before operation. switch trigger actuates properly and returns to CAUTION: Use the reversing switch only after... - Page 7 Position of Speed Torque Applicable speed operation change lever High Heavy load- ing operation High Light loading operation To change the speed, switch off the tool first. Select the "2" side for high speed or "1" for low speed but high torque. Be sure that the speed change lever is set to the correct position before operation.
-
Page 8: Adjusting The Fastening Torque
Adjusting the fastening torque ► 1 . Action mode changing ring 2. Adjusting ring 3. Graduation 4. Arrow The fastening torque can be adjusted in 20 levels by turning the adjusting ring. Align the graduations with the arrow on the tool body. You can get the minimum fastening torque at 1 and maximum torque at 20. Before actual operation, drive a trial screw into your material or a piece of duplicate material to determine which torque level is required for a particular application. -
Page 9: Operation
Installing driver bit holder Screwdriving operation Optional accessory CAUTION: Adjust the adjusting ring to the proper torque level for your work. CAUTION: Make sure that the driver bit is inserted straight in the screw head, or the screw and/or driver bit may be damaged. First, turn the action mode changing ring so that the arrow on the tool body points to the marking. -
Page 10: Drilling Operation
Switch off the tool. Drilling operation Move the reversing switch lever to the neutral position. Turn the action mode changing ring so that the arrow First, turn the adjusting ring so that the arrow points to points to the marking. marking. Then proceed as follows. Turn the tool. Drilling in wood NOTE: This use is convenient for checking the screwdriving. -
Page 11: Maintenance
Never use gasoline, benzine, thinner, alcohol or the like. Discoloration, deformation or cracks may result. To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. OPTIONAL ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. - Page 12 Makita Corporation 885465A5 20171010 www.makita.com...