hit counter code
Samsung CL-29Z43MQ Service Manual
  1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Receiver
  5. CL-29Z43MQ
  6. Service manual

Samsung CL-29Z43MQ Service Manual

Color television receiver
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
SERVICE
COLOR TELEVISION RECEIVER
COLOR TELEVISION RECEIVER
Chassis : KS7C(N)_Timecop
Model
: CL29Z43MQVXXAZ
Manual
■ GREEN CRT
■
■
CL-29Z43MQ
FEATURES
Turbo Voice

Advertisement

Table of Contents
loading

Related Manuals for Samsung CL-29Z43MQ

Summary of Contents for Samsung CL-29Z43MQ

  • Page 1 COLOR TELEVISION RECEIVER Chassis : KS7C(N)_Timecop Model : CL29Z43MQVXXAZ SERVICE Manual COLOR TELEVISION RECEIVER FEATURES ■ GREEN CRT Turbo Voice ■ ■ CL-29Z43MQ...
  • Page 2 A68QGX793X601(M),0mG,0.985,1.3 T0066 AA96-02795A ASSY POWER CORD CP2/NO(4.0),H/S 300mm,CH T0074 AA59-00410B REMOCON SAMSUNG,TM85,S3C1860XP0,35,NTSC, T0238 AA64-04340A WINDOW REMOCON-LED Z40(SEH,TSE),PC,CLEAR S.N.A T0569 AA61-00813D SUPPORT-CRT 29Z30(SLIM),HIPS V0,T2.0,-,- S.N.A T0607 AA61-40113A STOPPER-PCB 501H,HIPS,-,-,HB,NTR,- S.N.A M0112 T0569 T0238 T0022 T0607 M0014 CIS3 CIS7 T0023 Samsung Electronics...
  • Page 3 ② Tap the upper part of the Back Cover 2 or 3 times and pull the Back Cover to separate it from the unit. : Disassemble the product after disconnecting the power cord and discharge the unit to prevent an electric shock and damage to the product due to static electricity. Samsung Electronics 12-1...
  • Page 4 ① Separate the Side AV Wire from the Front Cabinet and the Main Board. ② Pull Holder Chassis like the picture arrowdirection. ① Separate the Control 4P Wire,6P Wire,Speaker Wire from the Front Cabinet and the Main Board. 12-2 Samsung Electronics...
  • Page 5 Disassembly & Reassembly Part Name Description Description Photo Chassis ① Separate the Power cord,D-COIL,TILT,DY connector from Holder Main Board ① Remove the screw. Samsung Electronics 12-3...
  • Page 6 : Take care when separating the wires because pulling the wires by force may damage the socket. In addition, separate the wires on a flat and clean surface so as to prevent scratching of the material and the PCB. 12-4 Samsung Electronics...
  • Page 7 Disassembly & Reassembly 12-1-4 Disassembling the Main Board Part Name Description Description Photo Main Board ① Separate the cable from the Main Board. ① Separate the cable from the Main Board. Samsung Electronics 12-5...
  • Page 8 * CNV901A : This is a 6P connected from Tact,S/W pcb for IR,LED,5V. * CN902 : This is a 4P connected from Control PCB for Key1,Key2 input signal. * CN601 : This is a 4P connected to Speaker for Sound output signal. Samsung Electronics...
  • Page 9 Connected to the CRT Ass'y PIN No. Pin Name PIN No. Pin Name TILT CN503B CN701 Connecte to the CRT Ass'y Connected to the Side AV Port PIN No. Pin Name PIN No. Pin Name -16.5V +16.5V HEATER 200V Samsung Electronics...
  • Page 10 This supplies the final R/G/B signal from the Main Board and the CRT deflection signal to the CRT. 9-2-2 Names & Roles of Key Parts * CN503 : This is a 14P connected from MAIN PCB for R/G/B/AKB/HEATER/B+200V. * GT501,GT502 : This is a 2P connected to TBC-WIRE. Samsung Electronics...
  • Page 11 PCB Diagram 9-2-3 CRT Board Connector Pin CN503 Connects the R/G/B signal and power for the CRT and AMP from the Main Board. PIN No. Pin NAME TILT -16.5 +16.5 Heater +200V Samsung Electronics...
  • Page 12 Block Diagram 7. Block Diagram 7-1 Overall Block Diagram i t p ) l a l a t i t c o i t o i t i t c Samsung Electronics...
  • Page 13 Block Diagram 7-2 Partial Block Diagram 7-2-1 System Board Block Diagram Samsung Electronics...

  • Page 14: Service Instruction

    2. When replacing the Main Board : Focus adjustment, screen voltage setting and W/B adjustment are all required. 3. When replacing the CRT Ass'y : No adjustments required. 4. When replacing the Side AV : No adjustments required. Samsung Electronics...

  • Page 15: How To Access Service Mode

    TEST PATTERN EEPROM BUS STOP CHCKSUM RESET G2 ADJUST 3. Functions of the Keys within Service Mode MENU Show all menus Move the cursor to select an item. ▲ / ▼ Adjust the selected configuration value ◀ / ▶ Samsung Electronics...
  • Page 16 CL-29Z30MQ V Amp V Shift H EW H Shift V Linearity V SC H Parabola Upper Corner Lower Corner Upper Corner6 Lower Corner6 H Trapezium Angle EHT Time EHT Threshold EHT Vertical EHT Horizontal EHT Vertical2 EHT Horizontal2 Samsung Electronics...
  • Page 17 CL-29Z30MQ V Amp V Shift H EW H Shift V Linearity V SC H Parabola Upper Corner Lower Corner Upper Corner6 Lower Corner6 H Trapezium Angle EHT Time EHT Threshold EHT Vertical EHT Horizontal EHT Vertical2 EHT Horizontal2 Samsung Electronics...
  • Page 18 Alignment & Adjustment 0 V-AMP H-Parabola 1 V-Shift Upper Coner 2 H EW Low Coner 3 H-Shift H-Trapezium 4 V-Linearity 10 BOW 5 V SC 11 Angle Samsung Electronics...
  • Page 19 CL-29Z30MQ R Cutoff G Cutoff B Cutoff R Drive G Drive B Drive Sub Bright Sub Contrast Sub Color Sub Tint AKB Option BCL Threshold BCL Gain BCL Time Sub Sharpness Pilot Low Pilot High V-Mute(x100ms) BCL TCUP Samsung Electronics...
  • Page 20 Item Remark CL-29Z30PQ CL-29Z30MQ Melody Volume HB Start HB Stop RF AGC VM Gain VM Delay V Peaking BLE Tilt BLE Gain BLE Mode BLE Break CTI Gain CTI Coring LTI Gain D-EHT Time DCT Ratio VSP COMB Samsung Electronics...
  • Page 21 PIP NTSC V.Pos PIP H.Pos PIP R Cutoff PIP B Cutoff PIP R Drive PIP B Drive 6. YC Delay 29" SLIM 29" SLIM Item Remark CL-29Z30PQ CL-29Z30MQ PAL Delay SECAM Delay NTSC Delay PAL(AV) Delay SECAM(AV) Delay NTSC(AV) Delay Samsung Electronics...
  • Page 22 Alignment & Adjustment 7. Test Pattern 29" SLIM 29" SLIM Item Remark CL-29Z30PQ CL-29Z30MQ G2 Adjust Read Cut Read Drive IBRM WDRM COLR G B 50 / 50 / 50 50 / 50 / 50 Samsung Electronics...
  • Page 23 TTX V Position TTX H Position TTX Contrast TTX Brightness OSD Contrast OSD Brightness Double TTX H Position Standard Equ100(Std BASS) Standard Equ300(Std TREBLE) Standard Equ1K(Music BASS) Standard Equ3K(Music TREBLE) Standard 10K(Movie BASS) Music Equ100(Movie TREBLE) Music Equ300(Speech BASS) 3-10 Samsung Electronics...
  • Page 24 PIP G CUTOFF PIP G DRIVE OSD/PIP BRIGHT BALANCE PIP BRIGHT OFFSET MDB_STRENGTH MDB_HARMONIC MDB_HP MDB_LP MDB_LIM MDB_CUTOFF EHT POSITION 1 EHT POSITION 2 3.4CH SLLTHD (TV-NO NOISE) CH SLLTHD (TV-NO NOISE) LNA Operating Point SLLTHDV(TV NO NOISE) Samsung Electronics 3-11...
  • Page 25 Remark CL-29Z30PQ CL-29Z30MQ LNA Default LNA SWITCH LMIXOFS H-OUTDEL CR-P Initial CR-I Initial DRX_CR_AMP_TH Over Modulation Return Counter VCR Mode Counter "VID_AMP_HEAD_BS(In the modula- tion)" CR_P (In the Over Modulation) "THRSEL(picture shaking when weak signal)" SLLTHDVP EEP_BC_MIN_LIMIT 3-12 Samsung Electronics...
  • Page 26 2RCA+S+DVD 2RCA+S+DVD Tilt Vchip Caption 2-Tuner Auto On StandBy LED Philippines(AV MULTI) Osd Language English English FM Radio Antenna Disp Hi-Deviation Plug & Play DNIe Jr Volume Curve Small Small Color Matrix Japan Japan PWM/Parabola Parabola Parabola Samsung Electronics 3-13...
  • Page 27 Alignment & Adjustment 11. White Balance 29" SLIM 29" SLIM Item Remark CL-29Z30PQ CL-29Z30MQ 269± 3/274± 3/40± 0.3 269± 3/274± 3/40± 0.3 269± 3/274± 3/2.0± 0.2 269± 3/274± 3/2.0± 0.2 3-14 Samsung Electronics...

  • Page 28: Service Adjustment

    ② Press "Power Off → Mute → 1 → 8 → 2 → Power On" using the remote control and enter Factory Mode. ③ Enter Deflection Mode. ④ Adjust the V-AMP, V-SHIFT, H-AMP and H-SHIFT items so that the width becomes 5 and the height becomes 4. Samsung Electronics 3-15...
  • Page 29 Upper Coner 4 V-Linearity Low Coner 5 V SC ⑦ When the adjustments are complete, display the Lion pattern and check that the picture size has not been changed. If there is no change, finish the adjustments. 3-16 Samsung Electronics...

  • Page 30: Replacements & Calibration

    3-5-1 Adjusting the Focus 1. Display the Cross Hatch pattern. 2. Turn the Focus clockwise to the optimal position. 3. Slowly turn the Focus clockwise so that the cross line is the most clearly displayed. After Adjustment Focus Samsung Electronics 3-17...
  • Page 31 1. Select "Power Off → Mute → 1 → 8 → 2 → Power On" to enter Service Mode. 2. Display the Toshiba pattern. Screen 3. Use remocon come into "G2 Adjust" mode by hand. 4. Turn Screen VR of FBT and confirm the characters below changed from RED to GREEN. 3-18 Samsung Electronics...
  • Page 32 4. When the adjustment is finished, check the following checklist. - If there is a spot on the screen when turning the TV set off/on, adjust the Screen Voltage again. - If there is a ghost line on the screen, adjust the Screen Voltage again. Samsung Electronics 3-19...
  • Page 33 * Micom Block consists of five aspects as: Video & Sound IF Processor,Sound Processor, Video Processor, Display and Deflection Processor and Controller, OSD,Text Processing. * TDQ-6F/13F2S (Tuner): RF signal processing, output IF signal. Samsung Electronics 13-1...
  • Page 34 * EEPROM: As a extended ROM of TVT. It contains some data which is used to program executing. * STR W6750F: SMPS control HIC. Provide switching signal in order to control the trans working. * TDQ-6F/13F2S(TUNER): Receives the RF signal and output a fixed IF to Micom. 13-2 Samsung Electronics...
  • Page 35 B+5V IC802(78R05) IC802(78R05) 130V 130V B+5V B+5V ± 16.5V ± 16.5V Vertical AMP Vertical AMP B+33V B+33V TUNER TUNER Q813(KSC2331-Y) Q813(KSC2331 - Y) B+8V B+8V B+210V B+210V Video AMP Video AMP SCREEN SCREEN FOCUS FOCUS HEATER HEATER Samsung Electronics 13-3...
  • Page 36 Vertical DEF. LA78045,SANYO Horizontal DEF. 2SC5936M,MATSUSHITA SOUND AMP TDA7297SA, SGS-TOMSON 10W+10W SOUND AMP TDA7266SA, SGS-TOMSON 7W+7W EEPROM 24C161,SAMSUNG VIDEO AMP TDA6109JF, Philips Regulator 78R05 B+5V Regulator Regulator 78RM33 A+3.3V Regulator Regulator KSC2328A-Y A+5V Regulator Regulator KSC2331-Y B+3.3V Regulator 13-4 Samsung Electronics...

  • Page 37: Cl29Z43Mqvxxaz

    47uF,20%,25V,GP,TP,5x11,5 2401-002619 C-AL 47uF,20%,25V,GP,TP,5x11,5 2401-002619 C-AL 47uF,20%,25V,GP,TP,5x11,5 2401-002619 C-AL 47uF,20%,25V,GP,TP,5x11,5 2401-002619 C-AL 47uF,20%,25V,GP,TP,5x11,5 2401-002619 C-AL 47uF,20%,25V,GP,TP,5x11,5 2401-002619 C-AL 47uF,20%,25V,GP,TP,5x11,5 2401-002619 C-AL 47uF,20%,25V,GP,TP,5x11,5 2401-002619 C-AL 47uF,20%,25V,GP,TP,5x11,5 2401-002619 C-AL 47uF,20%,25V,GP,TP,5x11,5 2401-003578 C-AL 1000uF,20%,10V,GP,TP,8x20mm,5 2401-003578 C-AL 1000uF,20%,10V,GP,TP,8x20mm,5 C101 2202-000243 C-CERAMIC,MLC-AXIAL 33pF,5%,50V,SL,TP,3. Samsung Electronics...
  • Page 38 C-FILM,LEAD-PPF 470nF,5%,400V,BK,26x21.5 CV101 2306-000122 C-FILM,LEAD-PPF 100nF,5%,50V,TP,7.3x4.0x CV103 2301-000383 C-FILM,LEAD-PEF 10nF,5%,50V,TP,6x7x3.2mm CV104 2305-000665 C-FILM,LEAD-PEF 100nF,5%,63V,TP,7.5x4.0x CV110 2301-000383 C-FILM,LEAD-PEF 10nF,5%,50V,TP,6x7x3.2mm CV111 2202-002253 C-CERAMIC,MLC-AXIAL 100.0nF,+80-20%,50.0 CV199 2202-000849 C-CERAMIC,MLC-AXIAL 0.018nF,5%,50V,C0G,- CV201 2202-000796 C-CERAMIC,MLC-AXIAL 1nF,10%,50V,Y5P,-,2x CV203 2202-000796 C-CERAMIC,MLC-AXIAL 1nF,10%,50V,Y5P,-,2x CV205 2202-000796 C-CERAMIC,MLC-AXIAL 1nF,10%,50V,Y5P,-,2x Samsung Electronics...
  • Page 39 DIODE-RECTIFIER TVR10G,400V,1A,DO-41,TP D807 0402-000005 DIODE-RECTIFIER 31DF4,400V,3A,DO-201AD,B D808 0402-000132 DIODE-RECTIFIER 1N4004,400V,1A,DO-41,TP D809 0402-000005 DIODE-RECTIFIER 31DF4,400V,3A,DO-201AD,B D811 0402-001603 DIODE-RECTIFIER MUR480E,800V,4A,DO-201AD D813 0402-000493 DIODE-RECTIFIER 1R5GU41,400V,1.5A,DO-15L D814 0401-000005 DIODE-SWITCHING 1N4148,75V,150mA,DO-35,T D817 0402-000132 DIODE-RECTIFIER 1N4004,400V,1A,DO-41,TP D819 0401-000005 DIODE-SWITCHING 1N4148,75V,150mA,DO-35,T D820 0401-000005 DIODE-SWITCHING 1N4148,75V,150mA,DO-35,T Samsung Electronics...
  • Page 40 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H EY603 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H EY800 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H EY801 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H EY802 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H EY803 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H EY804 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H EY805 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H EY806 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H EY807 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H Samsung Electronics...
  • Page 41 2901-000297 FILTER-EMI ON BOARD -,3A,-,3.5x5mm,TP,- F101 2901-000299 FILTER-EMI ON BOARD -,6A,UL/CSA,-,9x7.5, F801A 3602-000001 FUSE-CLIP -,-,30mohm F801B 3602-000001 FUSE-CLIP -,-,30mohm FD801S 3601-001228 FUSE-AXIAL LEAD 125V,10A,FAST-ACTING,EPO FD802 3601-000414 FUSE-CARTRIDGE 250V,5A,SLOW-BLOW,GLASS,5 FD802S 3601-001163 FUSE-AXIAL LEAD 125V,7A,-,EPOXY,2.4X7.1M GT404 BH71-40300A PIN-HINGE BRASS,D2.36!,HEAT/SINK,SN S.N.A Samsung Electronics...
  • Page 42 INDUCTOR-AXIAL 22UH,10%,4298 LV206 2701-000184 INDUCTOR-AXIAL 4.7UH,10%,2534 LV252 2702-001094 INDUCTOR-RADIAL 10uH,10%,4x6mm LV252A 2701-000114 INDUCTOR-AXIAL 10UH,10%,2534 LV252B 2701-000114 INDUCTOR-AXIAL 10UH,10%,2534 LV701 2701-000142 INDUCTOR-AXIAL 1UH,10%,2534 LV702 2701-000142 INDUCTOR-AXIAL 1UH,10%,2534 LV703 2701-000142 INDUCTOR-AXIAL 1UH,10%,2534 LV901 2701-000143 INDUCTOR-AXIAL 1UH,10%,3070 LV902 2001-000281 R-CARBON 100ohm,5%,1/8W,AA,TP,1.8x3.2mm Samsung Electronics...

  • Page 43: Cl29Z43Mqvxxaz

    R-METAL(S) 39Kohm,1%,1/2W,AA,TP,2.4x6.4m R416 2004-004048 R-METAL(S) 3.9Kohm,1%,1/2W,AA,TP,2.5x6.5 R417 2004-005059 R-METAL(S) 2.7Kohm,1%,1/2W,AA,TP,6.4x2.4 R418 2008-001135 R-FUSIBLE(S) 3.9ohm,5%,1W,AF,TP,3.9x10mm R420 2004-000412 R-METAL 18Kohm,1%,1/4W,AA,TP,2.4x6.4mm R423 2003-001042 R-METAL OXIDE(S) 5.6Kohm,5%,2W,AF,TP,3.9 R424 2003-002070 R-METAL OXIDE 1ohm,5%,2W,AF,TP,3.9x10mm R425 2003-002070 R-METAL OXIDE 1ohm,5%,2W,AF,TP,3.9x10mm R426 2003-000540 R-METAL OXIDE(S) 1Kohm,5%,2W,AF,TP,4x12m Samsung Electronics...
  • Page 44 R-CARBON 820ohm,5%,1/8W,AA,TP,1.8x3.2mm R943 2001-000037 R-CARBON(S) 330ohm,5%,1/2W,AA,TP,2.4x6.4 R944 2004-000433 R-METAL 1Kohm,1%,1/8W,AA,TP,1.8x3.2mm RL801S 3501-001053 RELAY-POWER 5Vdc,530mW,10000mA,1FormA,15 RL909 2001-000003 R-CARBON 330ohm,5%,1/8W,AA,TP,1.8x3.2mm RM901 AA32-00015A Module Remocon RV105 2001-000734 R-CARBON 4.7Kohm,5%,1/8W,AA,TP,1.8x3.2mm RV106 2001-000977 R-CARBON 8.2Kohm,5%,1/8W,AA,TP,1.8x3.2mm RV107 2001-000273 R-CARBON 100Kohm,5%,1/8W,AA,TP,1.8x3.2mm RV108 2001-000832 R-CARBON 510ohm,5%,1/8W,AA,TP,1.8x3.2mm Samsung Electronics...
  • Page 45 R-METAL 2Kohm,1%,1/8W,AA,TP,1.8x3.2mm RV915 2004-000869 R-METAL 3Kohm,1%,1/8W,AA,TP,1.8x3.2mm RV916 2004-001126 R-METAL 6.2Kohm,1%,1/8W,AA,TP,1.8x3.2mm RV917 2004-000531 R-METAL 20Kohm,1%,1/2W,AA,TP,2.3x6.5mm RV920 2001-000281 R-CARBON 100ohm,5%,1/8W,AA,TP,1.8x3.2mm RV922 2004-000433 R-METAL 1Kohm,1%,1/8W,AA,TP,1.8x3.2mm RV923 2001-000281 R-CARBON 100ohm,5%,1/8W,AA,TP,1.8x3.2mm RV924 2001-000734 R-CARBON 4.7Kohm,5%,1/8W,AA,TP,1.8x3.2mm RV925 2001-000281 R-CARBON 100ohm,5%,1/8W,AA,TP,1.8x3.2mm RV926 2001-000734 R-CARBON 4.7Kohm,5%,1/8W,AA,TP,1.8x3.2mm Samsung Electronics...
  • Page 46 6003-001019 SCREW-TAPTITE RH,+,-,B,M4,L12,ZPC(BLK),S T0069 AA60-00091D SPACER-FELT -,FELT,200X10,-,-,BLK,T0.35, S.N.A T0069 AA60-00091K SPACER-FELT -,FELT,330X10,-,-,BLK,T0.35, S.N.A AA61-00468A HOLDER-FBT TOOL,2939,-,-,-,-,-,MOLD S.N.A M0006 AA63-01426D COVER-REAR 29Z43(SEDA),HIPS,HB,BK500 S.N.A T0066 AA64-04387F INLAY-BACK 29Z50,PS,T3.0,SHEET,BLK,KS7C, S.N.A ASSY COVER FRONT M0001 AA90-05778Q ASSY COVER FRONT CL29Z43MQVXXAZ S.N.A 5-10 Samsung Electronics...
  • Page 47 BAG PE HDPE/NITRON/HDPE,T0.015/T0.5/T0.0 S.N.A ASSY BOX M0003 AA92-11990Q ASSY BOX CL29Z43MQVXXAZ S.N.A T0130 AA69-04272G BOX-00,SET 29Z40(OVERSEA),CB,DY-06,AB,YE 1.01 S.N.A ASSY ACCESSORY M0045 AA92-12581A ASSY ACCESSORY CL29Z50MQVXXAZ S.N.A M0045 AA96-05343A ASSY ACCESSORY CL29Z50MQVXXAZ S.N.A T0524 6902-000009 BAG PE HDPE,T0.03,W240,L400,TRP,8,2,-,5. S.N.A Samsung Electronics 5-11...
  • Page 48 AA63-01360A COVER-BOTTOM TM-85,ABS,HB,BLK S.N.A M0006 AA63-01361A COVER-REAR SUB TM-88,ABS,HB,BLK S.N.A T0603 AA64-04321A WINDOW-RMC TM-88,PC,VIOLET S.N.A T0175 BN68-00844A MANUAL FLYER-01,WARRANTY CARD LCD/CDT Le S.N.A M0156 AA68-03809B MANUAL USERS-01 Comm,Samsung,Portuguese, S.N.A ASSY LABEL M0019 AA92-12580B ASSY LABEL CL29Z43MQVXXAZ S.N.A 5-12 Samsung Electronics...

  • Page 49: Chapter 6 Troubleshooting

    2) Check that the Tact Switch has been pressed. 3) Check that the signal cable is properly connected. 4) Check that channel setting has been set. ■ When the picture is abnormally displayed on the screen, display the Test pattern and check the adjustment status. Samsung Electronics...
  • Page 50 When the screen is not properly displayed and the left or right side of the picture is shrunk, or the top or bottom of the screen is expanded or shrunk, check if the Deflection Blcok is out of order. Samsung Electronics...

  • Page 51: Troubleshooting Procedures By Error Modes

    If you press the power switch of the or the channel key on the remote control when in St-BY sta- tus, the screen will be turned on. ○→◑ If the LED blinks and the screen is not displayed, check the connection between the Power and the Main Board. Samsung Electronics...

  • Page 52: Troubleshooting Procedures By Ass'y

    (25, 43, 72Pin : 3.3V, 70Pin : 5.0V) 2. NO Video Heater Voltage Check R418, R516 Check V999S Heater 6.0~6.3 Vcc Video B+ Check (IC501 6PIN) IC501 Check : 180V~210V ICV201 Check IC301 Check IC301 Supply Voltage Check : +16.5V, -16.5V Samsung Electronics...
  • Page 53 IC602 Problem → Change ICV201 Problem → Change 4. Fly Back Lion Badness Video B+ Check (IC501 6PIN) IC501 Check : 180V~210V ICV201 Problem → Change FD801S IC804 IC801S IC601 FP801S Power cord IC901 ICT501 IC201S T401 TU01S IC301S QE01 Q401 Samsung Electronics...

  • Page 54: Troubleshooting By Blocks

    The RF / CTV signal is transmitted to the Tuner of the Main Board. If the signal is not received, check the following items. - Power supply: 5V, 33V - Check for RF defects: Check the IF output - Check for AUDIO defect: Check the SIF Signal output Samsung Electronics...
  • Page 55 Troubleshooting 2. Micom Diagnosis VSP/MSP/DRX Block ETC - Power supply: 3.3V, 5V, 8V - Check for input defects: Y/C(CVBS, S-VHS), 480i Y/Pb/Pr signal Samsung Electronics...
  • Page 56 The signals are sent to VCTI and the selected signals are output. If the signal input or output does not work, check the following items. - Check for input defects: Check the Micom input pin. - Check for output defects: Check JAR701 (for RF/AV) or JA701(for comp/S_VHS) Samsung Electronics...
  • Page 57 This receives the signal from the Audio Processor (VCTI) and outputs the signal in7W+7W / 10W + 10W sound. - Power supply : 14V - Check for input defects : AMP-R,AMP-L - Check for output defects : L+, L-, R+,R- Samsung Electronics...
  • Page 58 If the voltage is measured, the problem is a defect in the FBT unit. (When you don't have an oscilloscope, and you can hear the high-voltage sound, you can determine that the horizontal TR is normal.) - Is the vertical input waveform output from the VCTI VDP Pin. 6-10 Samsung Electronics...
  • Page 59 When Check the AC power cord for possible damages. Keep voltage exceeds the specified limits, check each special the part or the lead away from any heat-emitting part. materials. Samsung Electronics...
  • Page 60 Critical safety parts should be bracketed with ( Use only regular parts for replacements (in particular, flame resistance and dielectric strength specifications). Irregular parts or materials may cause electric shock or fire. Samsung Electronics...
  • Page 61 5. Check for insulation between the blade of the AC plug 10. The sharp edges of the metal material may cause and that of any conductive materials (i.e. the metal physical damage, so ensure wearing protective gloves panel, input terminal, earphone jack, etc). during the repair. Samsung Electronics...
  • Page 62 These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. Samsung Electronics...
  • Page 63 5. Make sure to turn the power off and unplug the power cord from the outlet before repositioning the product. Also check the antenna cable or the external connectors if they are fully unplugged. Damage to the cord may cause fire or electric shock. Samsung Electronics...
  • Page 64 Schematic Diagram 10. Schematic Diagram 10-1 MAIN This Document can not be used without Samsung’s authorization. Power TP07 Signal TP09 TP08 TP09 TP07 TP08 Samsung Electronics 10-1...
  • Page 65 Schematic Diagram 10-2 POWER This Document can not be used without Samsung’s authorization. TP01 Power TP01 Signal TP02 TP04 TP02 TP04 TP05 TP06 TP06 TP05 10-2 Samsung Electronics...
  • Page 66 Schematic Diagram 10-3 Sound This Document can not be used without Samsung’s authorization. Samsung Electronics 10-3...

  • Page 67: Chapter 8 Wiring Diagram

    Wiring Diagram 8. Wiring Diagram 8-1 Overall Wiring Samsung Electronics...

  • Page 68: Pin Connection

    Wiring Diagram 8-2 Pin Connection Samsung Electronics...

  • Page 69: Power

    - VCT4822_F1: Sound Processor, Video Processor, Display and Deflection Processor Controller, OSD and Text Processing - TDA7297SA : Sound Signal Amplify - STR-X6750F: Power Supply HIC - TDQ-6F/13F2S (Tuner): RF signal processing , output IF signal - TECCIO4OSL32A(E) : 2Tuner-PIP Main tuner - TMQH2-003A,2 Tuner-PIP Sub tuner Samsung Electronics...

  • Page 70: Sound

    Product Specification 2-2 Key Features Model CL-29Z43MQ Voltage AC100-240 V(Mexico : AC127V) Frequency of Operation 50/60 Hz Power Consumption 140 Watts Dimensions (mm/inches) 771 x 420 x 593 mm Weight (Kg/ lbs) 41.0 Kg ■ H/W Configuration - 29" Slim fit CRT adopted ■...
  • Page 71 Product Specification 2-3 Specifications Analysis Model CL29M6PQ CL-29Z43MQ Chassis KS7A KS7C Design Screen Size 29" 29" FLAT SLIM-FIT DNIe Jr. ■ Comb Filter Velocity Modulation Picture Video Noise Reduction Auto Kinetic Bias Color Tone Control Tilt Control Picture Mode 4 Mode...
  • Page 72 Product Specification 2-4 Accessories Accessories Item Item code Remark Remote Control AA59-00410B AAA Alkaline Battery (2) 4301-000103 Samsung Service Owner's Instructions AA68-03809B center Safety Guide Manual Warranty Card BN68-00844A Registration Card Video Cable / Audio Cable S-Video Cable Internal shopping mall...

  • Page 73: Chapter 11 Operation Instruction & Installation

    ENTER button on the remote control. features. + VOL – Press to increase or decrease the volume. In the on-screen menu, use the + VOL – button as you would use the œ œ and √ √ button on the remote control. Samsung Electronics 11-1...
  • Page 74 Use the left side panel jacks to connect a component that is used only occasionally, such as a camcorder or video game. S-VIDEO Video inputs for external devices with an S-Video output. AV IN 2 Video and audio inputs for external devices. 11-2 Samsung Electronics...
  • Page 75 DVD or DTV set-top box. 480i video signal input is available. AV OUT Connect to the audio/video input jacks of a recording ANT IN VCR. Connect to an antenna or cable TV system. Samsung Electronics 11-3...
  • Page 76 You can use the remote control up to a distance of about 23 feet from the TV. When using the remote control, always point it directly at the TV. You can also use your remote control to operate your VCR, Cable box, DVD player, or Set-Top Box. 11-4 Samsung Electronics...

  • Page 77: Table Of Contents

    Table of Contents Chapter 1 Precaution ■ 1-1 Safety Precautions ............1-1 ■...
  • Page 78 Chapter 9 PCB Diagram ■ 9-1 Main Board ..............9-1 ■...

  • Page 79: Chapter 14 Reference Information

    Reference Information 14. Reference Information 14-1 Option Byte Samsung Electronics 14-1...

  • Page 80: Technical Terms

    Audio Multimix provides 2 languages for audio when broadcast- ing a foreign movie, drama, news, etc. You can select and lis- ten to one of the supported languages or you can select and listen to both languages simultaneously. 14-2 Samsung Electronics...

Table of Contents