Related Manuals for Makita XOP02T
Summary of Contents for Makita XOP02T
- Page 1 INSTRUCTION MANUAL Cordless Random Orbit Polisher XOP02 IMPORTANT: Read Before Using.
-
Page 2: Specifications
SPECIFICATIONS Model: XOP02 Backing pad diameter 123 mm (4-7/8″) Orbits per minute Normal mode 0 - 6,800 /min Finishing mode 0 - 5,200 /min Overall length 530 mm (20-7/8″) Rated voltage D.C. 18 V Net weight 3.1 - 3.6 kg (6.8 - 7.8 lbs) •... - Page 3 Personal Safety Maintain power tools and accessories. Check for misalignment or binding of moving parts, break- Stay alert, watch what you are doing and use age of parts and any other condition that may common sense when operating a power tool. affect the power tool’s operation.
- Page 4 Use of non-genuine Makita batteries, or batteries that have been altered, may result in the battery bursting no load speed causing � es, personal injury and damage. It will also void the Makita warranty for the Makita tool and charger. orbits per minute Tips for maintaining maximum...
-
Page 5: Functional Description
Indicating the remaining battery FUNCTIONAL capacity DESCRIPTION Only for battery cartridges with the indicator CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before adjusting or checking function on the tool. Installing or removing battery cartridge CAUTION: Always switch off the tool before... -
Page 6: Overheat Protection
Overheat protection For continuous operation, depress the lock button while pulling the switch trigger, and then release the switch When the tool or battery is overheated, the tool stops trigger. To stop the tool, pull the switch trigger fully, then automatically. -
Page 7: Finishing Mode
Random orbit mode is orbital action with free rotation of Selecting the action mode the pad for � ne polishing. Rotate the change knob clockwise for random orbit Turn the change knob to alter the rotation mode. mode. Finishing mode In the �����... - Page 8 Installing side grip ASSEMBLY Optional accessory CAUTION: Always be sure that the tool is CAUTION: Tighten the caps or side grip firmly. switched off and the battery cartridge is removed Otherwise, the front cover may fall and cause an injury. before carrying out any work on the tool.
-
Page 9: Operation
If the be performed by Makita Authorized or Factory Service side grip or caps are loose, the front cover may fall Centers, always using Makita replacement parts. -
Page 10: Optional Accessories
OPTIONAL ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.