Advertisement
Quick Links
4ft and 5ft Manual Crumbers
RT1200 Trencher
Model No. 25465
Model No. 25465E
Model No. 25466
Model No. 25466E
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Description
Crumber bar
Crumber blade (6 inches)
Crumber blade (8 inches)
Carriage bolt (1/2 x 4 inch)
Washer (1/2 inch)
Locknut (1/2 inch)
Spacer
Note: You should have either 2 people or lifting equipment
to perform this procedure.
1. Park the machine on a firm, level surface.
2. Move the boom to the horizontal position.
3. Turn off the engine and remove the key.
4. If the space between the mounting plates is too narrow
to insert the crumber bar between them, loosen the
4 bolts and the 4 locknuts that secure the crumber
mounting brackets to the boom enough so that you can
insert the crumber bar between them (Figure 1).
© 2013—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Qty.
1
1
1
2
Install the crumber.
2
2
1
Register at www.Toro.com.
1
2
Figure 1
1. Crumber mounting bracket
(2)
2. Bolts
Original Instructions (EN)
All Rights Reserved *3378-118* A
Printed in the USA
Form No. 3378-118 Rev A
Installation Instructions
Use
3
3. Locknuts
g025236
Advertisement
Related Manuals for Toro 25465
Summary of Contents for Toro 25465
- Page 1 Form No. 3378-118 Rev A 4ft and 5ft Manual Crumbers RT1200 Trencher Model No. 25465 Model No. 25465E Model No. 25466 Model No. 25466E Installation Instructions Installation Loose Parts Use the chart below to verify that all parts have been shipped.
- Page 2 5. Loosely install the 4 hex-head bolts (M12 x 110 mm) and the 4 locknuts (M12) from the kit onto the plates, and insert the crumber bar between the plates and the bolts as shown in Figure 2. Note: Torque the bolts and locknuts to 124 to 154 N-m (91 to 113 ft-lb).