Advertisement
Table of Contents
Bagger Enhancement Kit
ProLine Commercial Walk-Behind Mower with 36in Floating
Cutting Unit
Model No. 140-4321
Determine the left and right sides of the machine from the normal operating position.
Preparing the Machine
1.
Park the machine on a level surface.
2.
Disengage the blade-control switch.
3.
Engage the parking brake.
4.
Shut off the engine and remove the key.
5.
For easier access, raise the front of the machine and support it using jackstands rated for your machine.
WARNING
Mechanical or hydraulic jacks may fail to support the machine and cause serious injury.
Use jack stands when supporting the machine.
Installing the Kit
Install the kit as shown in
1. Nut (4)
2. Skirt
© 2020—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Figure
1.
3. Right skirt bracket
4. Bolt (4)
Register at www.Toro.com.
Figure 1
Original Instructions (EN)
Form No. 3439-319 Rev A
Installation Instructions
5. Left skirt bracket
All Rights Reserved *3439-319* A
Printed in the USA
g319532
Advertisement
Table of Contents
Related Manuals for Toro 140-4321
Summary of Contents for Toro 140-4321
- Page 1 Form No. 3439-319 Rev A Bagger Enhancement Kit ProLine Commercial Walk-Behind Mower with 36in Floating Cutting Unit Model No. 140-4321 Installation Instructions Determine the left and right sides of the machine from the normal operating position. Preparing the Machine Park the machine on a level surface.