Table of Contents
Advertisement
Quick Links
Video inserter
RL4-MM-R
Compatible with Opel vehicles
with Multimedia Radio and Multimedia Navi
with 7inch touch monitor
Video-inserter for front- and rear-view camera
and two additional video inputs
Product features
• Video-inserter for factory-infotainment systems
• 1 CVBS Input for rear-view camera
• 1 CVBS Input for front camera
• 2 CVBS Video-inputs for after-market Video sources (e.g. USB-Player, DVB-T2
Tuner)
• Automatic switching to rear-view camera input on engagement of the reverse gear
• Automatic front camera switching after reverse gear for 10 seconds
• Video-in-motion (ONLY for connected video-sources)
• Video-inputs NTSC compatible
Version 10.02.2023
HW:CAM(V100)/(V20+V41) + CAM(V100)/(V21+V41.3)
RL4-MM-NP
Advertisement
Table of Contents
Related Manuals for NavLinkz RL4-MM-R
Summary of Contents for NavLinkz RL4-MM-R
- Page 1 Video inserter RL4-MM-R Compatible with Opel vehicles with Multimedia Radio and Multimedia Navi with 7inch touch monitor Video-inserter for front- and rear-view camera and two additional video inputs Product features • Video-inserter for factory-infotainment systems • 1 CVBS Input for rear-view camera •...
-
Page 2: Table Of Contents
Contents 1. Prior to installation 1.1. Delivery contents 1.2. Checking the compatibility of vehicle and accessories 1.3. Boxes and connectors – video interface 1.4. Settings of the 8 Dip switches (black) 1.4.1. Activating the front camera (dip 1) 1.4.2. Enabling the interface’s video inputs (dip 2-3) 1.4.3. -
Page 3: Prior To Installation
Legal Information By law, watching moving pictures while driving is prohibited, the driver must not be distracted. We do not accept any liability for material damage or personal injury resulting, directly or indirectly, from installation or operation of this product. Apart from using this product in an unmoved vehicle, it should only be used to display fixed menus or rear-view- camera video when the vehicle is moving (for example the MP3 menu for DVD upgrades). -
Page 4: Checking The Compatibility Of Vehicle And Accessories
1.2. Checking the compatibility of vehicle and accessories Requirements Brand Compatible vehicles Compatible systems Astra K since model year 2020 Multimedia Navi and Multimedia Radio Opel Insignia B since 06/2018 With 7inch touch monitor Limitations: Video only The interface inserts ONLY video signals into the infotainment. For inserting Audio signals either the possibly existing factory audio-AUX-input or a FM-modulator can be used. -
Page 5: Settings Of The 8 Dip Switches (Black)
1.4. Settings of the 8 Dip switches (black) Some settings have to be selected by the dip-switches on the video interface. Dip position down = ON and position up = OFF. Function ON (down) OFF (up) Front camera enabled* disabled Power supply output +12V (max. -
Page 6: Enabling The Interface's Video Inputs (Dip 2-3)
1.4.1. Adjustment – power supply output (dip 1) If set to ON, the interface switches for 10 seconds from the rear-view camera to the front camera input after having disengaged the reverse gear, depending on the menu adjustments. In addition, a manual switch-over to the front camera input is possible via keypad (short press) from any image mode. -
Page 7: Installation
2. Installation To install the interface, first switch off the ignition and disconnect the vehicle’s battery. Please read the owner`s manual of the car, regarding the battery`s disconnection! If required, enable the car`s Sleep-mode (hibernation mode) In case the sleep-mode does not succeed, the disconnection of the battery can be done with a resistor lead. -
Page 8: Connection Schema
2.2. Connection schema Version 10.02.2023 HW:CAM(V100)/(V20+V41) + CAM(V100)/(V21+V41.3) RL4-MM-NP... -
Page 9: Connection - Picture Signal Cable
2.3. Connection – picture signal cable Remove the factory monitor Disconnect the female 6pin connector of the factory harness at the rear-side of the monitor and connect it to the male black coloured 6pin connector of the enclosed picture signal cable. -
Page 10: Connection - 10Pin Pnp Cable
2.4. Connection – 10pin PNP cable Remove the factory head-unit Connect the 10pin PNP cable’s female 10pin connector to the 10pin connector of the video interface. Disconnect both female 28pin connectors of the factory harness at the rear side of the head unit and connect it to the male grey coloured 28pin connectors of the 10pin PNP cable. -
Page 11: Connection Of The Yellow Line In Case Of Faulty Touch Function Or Non-Off-Switching Of The Video Interface
2.4.1. Connection of the yellow line in case of faulty touch function or non-off-switching of the video interface If, after having completely connected the video interface, the touch functions fail after disengaging reverse gear the first time, or if the interface does not switch off after reaching vehicle's sleep mode, the yellow wire of the PNP harness has to be disconnected on the interface side and connected as follows: Cut the yellow wire of the PNP harness near the 10pin connector and connect it to the... -
Page 12: Analog Power Supply For The Video Interface
2.5. Analog power supply for the video interface Exceptionally, the GM-LAN communication may not succeed in all vehicles! If, after connecting the PNP harness, no interface LED lightens up while the ignition is turned on, the analog power supply needs to be done. Connect the 12pin interface cable’s white coloured female 12pin connector to the 12pin connector of the video interface. -
Page 13: Power Supply Output
2.6. Power supply output The red power supply output ACC/front cam out 12V (max 3A) can be used to power an external source and has a different assignment depending on the position of dip switch 1 (of the black 8 dips): Function Dip 1 ON +12V (max. -
Page 14: Connection - Video-Sources
2.7. Connection - video sources It is possible to connect an after-market rear-view camera, an after-market front camera and two more video sources to the video-interface. Before a final installation of the video sources, we recommend a test-run to ensure the compatibility of vehicle and interface. -
Page 15: Audio Insertion
2.7.1. Audio-insertion This interface is only able to insert video signals into the factory infotainment. If an AV- source is connected, the audio insertion has to be done by the factory audio AUX input or an FM-modulator. The inserted video-signal can be activated simultaneously to each audio- mode of the factory infotainment. -
Page 16: After-Market Rear-View Camera
2.7.3. After-market rear-view camera Some vehicles have a different reverse gear code on the GM-Lan which the video-interface is not compatible with. Therefore, there are two different ways of installation. If the video interface receives a signal of the reverse gear, the green wire “Reverse-OUT”... -
Page 17: Case 2: Interface Does Not Receive The Reverse Gear Signal
2.7.3.2. Case 2: Interface does not receive the reverse gear signal If the video interface does not deliver +12V on the green wire of the 12pin cable when reverse gear is engaged (not all vehicles are compatible), an external switching signal from the reverse gear light is required. -
Page 18: Connection - Video-Interface And External Keypad
2.8. Connection - video-interface and external keypad Connect the female 4pin connector of the keypad to the male 4pin connector of the 12pin interface cable. Note: Even if switching through several video sources by the keypad mightn’t be required, the invisible connection and availability is strongly recommended. Version 10.02.2023 HW:CAM(V100)/(V20+V41) + CAM(V100)/(V21+V41.3) RL4-MM-NP... -
Page 19: Picture Settings
2.9. Picture settings The picture settings are adjustable by the 3 push-buttons at the rear-side of the video- interface. Press the MENU button to open the OSD settings menu or to switch to the next menu item. Press UP and DOWN to change the selected value. The buttons are placed inside in the housing to avoid accidental changes during or after the installation. -
Page 20: Interface Operation
3. Interface operation 3.1. By factory infotainment button To switch the interface’s activated video sources, the factory infotainment buttons can be used. Press the according infotainment button to switch the input from the factory video to the inserted video sources. If all inputs are activated by dip switch settings, the order is the following: →... -
Page 21: Specifications
3.2. By external keypad ➢ Long press of keypad (2-3 seconds) By long pressing the external keypad (2-3 seconds), the video interfaces witches the input from the factory video to the inserted video sources. If all inputs are activated by dip switch settings, the order is the following: →... -
Page 22: Faq - Trouble Shooting-Interface Functions
FAQ – Trouble shooting Interface functions For any troubles which may occur, check the following table for a solution before requesting support from your vendor. Symptom Reason Possible solution Not all connectors have been reconnected to factory head- Connect missing connectors. unit or monitor after installation. -
Page 23: Technical Support
6pin to 8pin cable and isolate both ends. Technical Support Please note that direct technical support is only available for products purchased directly from NavLinkz GmbH. For products bought from other sources, contact your vendor for technical support. NavLinkz GmbH...