Products must be used, installed and operated in accordance with this manual. You may not be able to claim on the Electrolux manufacturer’s warranty in the event that your product fault is due to failure to adhere to this manual.
Page 3
ENGLISH BEFORE FIRST USE ....................... 16 DAILY USE 5.1 Loading The Laundry ....................17 5.2 Using Detergent And Additives ..................17 ......................18 5.3 Options Setting ....................19 5.4 Starting A Cycle ( .................... 19 5.5 Interruption Of A Program ....................
SAFETY INFORMATION 1.1 Conditions Of Use This appliance is intended to be used in household and similar applications such as: staff kitchen areas in shops, offices and other working ● environtment; farm houses; ● by clients in hotels, motels, and other residential type ●...
ENGLISH 1.2 Child Safety This washing machine is not intended for use by ● young children or infirm persons without supervision. Young children should be supervised to ensure that ● they do not play with the appliance. The packaging components (e.g. plastic film, ●...
1.3 General Safety 1.4 Installation ● ● It is dangerous to alter the specifica- This appliance is heavy. Care should tions or attempt to modify this product be taken when moving it. in any way. ● When unpacking the appliance, check ●...
ENGLISH 1.5 Use ● Only wash fabrics which are designed to be machine washed. Follow the instructions on each garment label. ● Do not overload the appliance. See the relevant section in the user manual. ● Before washing, ensure that all pockets are empty and buttons and zips are fastened.
PRODUCT DESCRIPTION 2.1 Parts Worktop Detergent/Softener Control Panel Dispenser (see page 10) (see page 17) Door Cabinet Drain Pump Filter Front Panel (see page 25) Level Adjustment Feet (Front) Mains Cable Transit Bolts Transit Bolts & Hose Support Water Inlet Hose...
ENGLISH Detergent/Softener Dispenser Transit Bolt (when remove) (For more informations, see page 17, 24) Prewash Main Wash Softener Door (when open) (for more informations, see page 17) Transit bolts must be removed Drum Lifter before using the appliance. Stainless Steel 2.2 Accessories Washing Drum Plastic Caps...
CONTROL PANEL 3.1 Control Panel Description Program Selector Knob Start/Pause and Add Clothes Touchpad Time Manager Touchpad On/Off Button Sensor Wash Touchpad Delay End Touchpad Display Vapour Touchpad Temperature Selection Touchpad Save Favourite Program Option Spin Selection Touchpad Prewash Touchpad...
ENGLISH 3.2 Program Chart Max. Load Program; Max. Type of load and soil level Temperature Spin (Dry range Speed Clothes) Cottons; 1200 9 kg White and coloured cotton. (Adjust wash time according to soil level. See Time Manager table on Cold to 90°C page 13) Mixed;...
Program; Max. Max. Load Type of load and soil level Temperature Spin (Dry range Speed Clothes) 1200 4 kg Delicate fabrics such as acrylics, viscose, polyester Delicates; items. (Adjust wash time according to soil level. Cold to 40°C See Time Manager table on page 13) Favourite –...
ENGLISH 3.4 Options Delay End ( ) Touchpad Before you start the program, this option Temperature Touchpad makes it possible to define the end of the washing program from minimum of 1 hour Press this touchpad repeatedly to to maximum of 20 hours. increase or decrease the wash temperature if you want your laundry to If program duration is longer than...
Page 14
Vapour ( ) Touchpad ) Touchpad Select “ ” option to turn Select this option to add approximately ON the sensors for the dirt and 30 minutes of tumbling in vapour during detergent residue. the wash cycle. Vapour helps open fabric fibers up to allow laundry additives to The “SensorWash”...
ENGLISH Stain Touchpad To set “Child Lock” option: ● To activate the function, press and Press this touchpad to add the stain hold “Prewash” touchpad about phase to a program. The indicator of this 2 seconds until the display shows the option comes on.
3.6 Start/Pause ( ) and Add Clothes ( Add Clothes ( ) Touchpad You can only add clothes when the icon “ ” shown on the This touchpad has 2 functions: display. Start/Pause ( To add clothes: Pressing the “Start/Pause”...
ENGLISH DAILY USE 5.1 Loading The Laundry 5.2 Using Detergent And Additives Turn the water tap on. Please read “Detergents Type Connect the main plug to the main and Quantity of Detergent”on socket. page 22 before use. Press the On/Off button to turn on the Detergent Dispenser Drawer washing machine.
NOTE: When you use the NOTE liquid detergent The softener amount used must Do not use gelatinous or thick not exceed the “MAX” mark in the liquid detergents. drawer. Do not put more liquid than the If you use thick softeners it is maximum level.
ENGLISH 5.4 Starting A Cycle ( 5.7 Changing The Options To start a program, press the Start/Pause It may be possible to change some of the touchpad. The corresponding pilot light options after a wash program has started. will stop flashing and a default program Press the touchpad Start/Pause.
NOTE NOTE After approximately 18 hours, if you do At the end of the program, the time not press Start/Pause touchpad, the remaining can suddenly decrease from appliance will drain and spin automatically 7 minutes or less to 0 due to the (except for “Wool”...
ENGLISH WASHING HINTS 6.1 Sorting The Laundry Wash bras, pantyhose and other delicates in a Follow the wash code symbols on each mesh laundry bag, garment label and the manufacturer’s which you can purchase washing instructions. Sort the laundry as from your supermarket.
Oil based paint: moisten with benzine Low sudsing detergents designed for stain remover, lay the garment on a soft front load washing machines are labelled cloth and dab the stain; treat several “Front Loading”, “high efficiency”, “HE”, times. such as Cold Power for Front Loaders or “Matic”.
ENGLISH Not enough detergent causes: the washload to turn grey, greasy clothes. Too much detergent causes: sudsing, reduced washing effect, inadequate rinsing. Use less detergent if: you are washing a small load, the laundry is lightly soiled, large amounts of foam during washing. INTERNATIONAL WASH CODE SYMBOLS These symbols appear on fabric labels, in order to help you choose the best way to treat your laundry.
CARE AND CLEANING To run a maintenance wash: WARNING! The drum should be empty of laundry. You must DISCONNECT the appliance from the electricity supply, before you can Select the “Tub Clean” program. carry out any cleaning or maintenance Press Start/Pause to start the program.
ENGLISH Flush it out under a tap to remove any WARNING! traces of accumulated powder. 1. Disconnect the mains plug from the mains socket. 2. Do not remove the filter while the appliance is operating. Do not clean the drain pump if the water in the appliance is hot.
Page 26
3. When the container is full of water, 5. Remove fluff and objects from the put the drainage duct back again and pump (if there are any). empty the container. Do step 2, 3 again and again until no more water flows out from the drain pump.
ENGLISH Put the filter back into the housing Clean the filter in the inlet hose with with exposed section facing up. a stiff brush. Make sure that you correctly tighten the filter to prevent leakages. Guide Remove the inlet hose behind the appliance.
8.9 Frost Precautions If the appliance is installed in an area where the temperature can be less than 0 °C, remove the remaining water from the inlet hose and the drain pump. Emergency Drain Disconnect the main plug from the main socket.
ENGLISH TROUBLESHOOTING 9.1 Possible Failures Alarm Code: Certain problems are due to lack of The appliance does not fill simple maintenance or oversights, which with water properly. can be solved easily without calling out The appliance does not drain an engineer. Before contacting your local the water.
Page 30
Malfunction Possible cause Solution The drain hose is squashed or Check the drain hose kinked. (Error code: connection. The drain pump is clogged. Clean the drain filter. Machine (Error code: does not empty and/or The option “Rinse Hold” Press Start/Pause does not has been selected.
Page 31
ENGLISH Malfunction Possible cause Solution The laundry is not evenly Pause the machine and distributed in the drum. redistribute laundry manually. Machine vibrates or There is very little laundry in the Load more laundry. is noisy: drum. Unstable floors eg. wooden floors. Refer to relevant paragraph in “Positioning”...
NOTE If you are unable to identify or solve the problem, contact our service centre. Before calling service centre, make a note of the model, serial number and purchase date of your machine: the Service Centre will require this information.
ENGLISH TECHNICAL DATA Dimensions (Height / Width / Depth) 85 X 60 X 65.9 cm Power supply (Voltage / Frequency) 220-240 V~ / 50 Hz Total power absorbed 2100 W Minimum fuse protection 10 A Water supply pressure (Maximum / Minimum) 0.8 MPa / 0.05 MPa Program Max.
Page 34
Remove the carton box. Remove the Put one of the polystyrene packaging polystyrene packaging materials. elements on the floor behind the appliance. Carefully put down the Remove the plastic bag which cover appliance with the rear side on it.
ENGLISH Remove the three transit bolts. 9. Pull out the plastic spacers. 11.2 Positioning It is important that your washing machine stands firm and leveled on the floor to ensure correct operation. The appliance must not be installed behind a lockable door, a sliding door or a door with a hinge on the opposite side to avoid restricting the washing machine door.
11.3 Water Inlet Loosen or tighten the feet to adjust the level. A correct adjustment of the Connect the water inlet hose to a tap appliance level prevents vibration, noise with 3/4” BSP thread. and the movement of the appliance when in operation.
Page 37
ENGLISH In a sink, drain pipe branch. Fitting Hose Guide This branch must be above the trap so that the bend is at least 60 cm above Pull apart to the ground. Hose bend insert hose. Guide hose Max. 90 cm pull hose Min.
11.5 Electrical Connection This machine is designed to operate on a 220-240 V, single-phase, 50 Hz supply. “An incorrect power supply may void your warranty.” Check that your domestic electrical installation can take the maximum load required (2.1 kW), also taking into account any other appliances in use.
ENGLISH ENVIRONMENT CONCERNS 12.1 Packaging Materials For more detailed information about recycling of this product, please contact The materials marked with the your local city office, your household symbol are recyclable. waste disposal service or the shop where >PE<=polyethylene you purchased the product. >PS<=polystyrene >PP<=polypropylene 12.3 Ecological Hints...