All-in-One Headset Operating Instructions WX-CH2050 Model No. Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use.
Page 2
1-800-8-BATTERY for information on how to recycle this battery. Matsushita Electric Corporation of America 1707 N. Randall Rd., Elgin IL. 60123 Panasonic Consumer Electronics Company 866-472-6767 The serial number of this product may be found in the bat- tery compartment of the unit.
● Operation Mode Setup ...12 INTRODUCTION The WX-CH2050 is an all-in-one headset designed for use in wireless communication systems, which are use in Drive thru menu boards, etc. It incorporates such necessary devices as a microphone and earphone, as well as a battery compartment and control buttons.
Page 5
q Head Band and Head Pad Adjustable to your head by sliding the head pad. w Battery Lock [EJECT] When removing the battery, slide out the lock. When loading a new battery, insert the battery until the lock clicks. e Battery (Optional accessory) See PRECAUTIONS.
OPERATING PROCEDURES Notes: • Transmission using the talk [T] or page [P] button is allowed for a single headset at a time. A continuous beep or distorted sound will be heard in a headset that tries to transmit while another person is operating. •...
● Communications with Customers [TALK] Any store personnel wearing the headset can communicate bidirectionally with any customer who is at the menu board. 1. Select a proper sound level by pressing the [▲] or [▼] button. 2. You will hear a tone in the headset when a vehicle arrives at the menu board.
BATTERY LOADING & REPLACEMENT Notes: • Refer to operating instructions included with the battery and battery charger. • Battery replacement is recommended when the power indicator lights up in red and a pulsing beep is heard in the headphone. ● Loading 1.
TROUBLESHOOTING Phenomenon The power indicator blinks in red. The power indicator lights up in red. Cannot turn on the headset. Cannot communicate with other store personnel or the customer at the menu board. Cannot hear or talk to the customer, while communications with the store personnel are OK.
SETUP PROCEDURES Caution: Setup of this product should only be performed by qualified service personnel or system installers. ● Opening the Switch Pocket 1. Press the power button to turn off the headset. 2. Open the switch pocket adjacent to the ear pad using the supplied screwdriver.
● DIP Switch Setup An eight-bit DIP switch is provided for system setups. The initial setting is marked with an asterisk *. Function Location USA* Tone Squelch Talk Lock Resumption 1. Press the power button to turn off the headset. 2.
● Operation Mode Setup Three operation modes can be set up to adapt the headset to your requirements. • Default channel setup • Talk lock/ Talk PTT (press to talk) • Page lock/Page PTT Indicator A/B channel Power — — Blink Blink —...
Page 13
1. Press the power button to turn off the headset. 2. While holding down the talk [T] and page [P] buttons simultaneously, press the power button to turn on the headset. The headset enters the setup mode where the indica- tors and buttons have different functions than in normal operation.