Page 1
20V Max Cordless Pruning chainsaw OWNER’S MANUAL 3 Year Limited Warranty on tool 2 Year Limited warranty on battery and charger. READ ALL INSTRUCTIONS BEFORE FIRST USE. KEEP THIS MANUAL FOR FUTURE REFERENCE. KEEP AWAY FROM CHILDREN. *Maximum initial battery voltage (measured without a workload) GY2193 is 20 volts.
20V MAX LI ION CORDLESS PRUNING SAW Voltage 20v (No load) Chain speed 3,200 RPM Bar length 4” (101mm) Cutting Capacity Up to 3” (80mm) Chain gauge 0.043” (1.1mm) Weight 2.76Lbs(1.25kg) BATTERY AND CHARGER Battery Voltage: 20V 2.0Ah Max* Li-ion (Maximum charged battery voltage, measured without load, is 20V with a nominal value of 18V) Charger:...
GENERAL SAFETY WARNINGS WARNING: Not for use on wet materials. Disconnect the battery before cleaning or changing accessories. WARNING: To avoid serious personal injury, do not attempt to use this product until you have read this instruction manual thoroughly and understand it completely.
Page 5
5240-051 20V MAX LI ION CORDLESS PRUNING SAW SYMBOL MEANING USE HEARING PROTECTION, PARTICULARLY DURING EXTENDED PERIODS OF OPERATION OF THE TOOL, OR IF THE OPERATION IS NOISY. WEAR A DUST MASK THAT IS DESIGNED TO BE USED WHEN OPERATING A POWER TOOL IN A DUSTY ENVIRONMENT.
Page 6
ELECTRIC GARDENING TOOL SAFETY GENERAL SAFETY WARNINGS WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. General Electric Gardening Tool Safety Warnings – Work Area Safety Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust.
Page 7
5240-051 20V MAX LI ION CORDLESS PRUNING SAW General Electric Gardening Tool Safety Warnings – Personal Safety Stay alert, be aware of your surroundings, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol, or medication.
Use the power tool and accessories in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. Hold power tools by the insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord.
Page 9
5240-051 20V MAX LI ION CORDLESS PRUNING SAW Cut wood only. Do not use chainsaw for purposes not intended. For example, do not use chainsaw for cutting plastic, masonry, or non-wood building materials. Use of the chainsaw for operations different than intended could result in a hazardous situation.
The user bears sole responsibility for any damage caused by inappropri- ate use. e) The charger is specifically designed to charge 20V Max Radley Battery Packs. Do not attempt to charge any other battery with this charger. f) To reduce risk of damage to electric plug and cord, pull by plug rather than cord when disconnecting charger.
Page 11
5240-051 20V MAX LI ION CORDLESS PRUNING SAW h) Do not operate charger with damaged cord or plug. Please replace immediately. i ) Do not operate charger if it has received a sharp blow, been dropped, or otherwise damaged in any way .
6. TIPS FOR MAINTAINING MAXIMUM BATTERY LIFE a) Charge the battery pack before completely discharged. Always stop tool operation and charge the battery pack when you notice a decrease in tool power. b) Charge the battery pack between 41-105° F (5-40.5° C). Let a hot battery pack cool down before charging it.
5240-051 20V MAX LI ION CORDLESS PRUNING SAW SAFETY SYMBOLS WARNING: Some of the following symbols may appear on the cordless pruningsaw Study these symbols and learn their meaning. Proper interpretation of these symbols will allow for more efficient and safer operation of this tool.
5240-051 20V MAX LI ION CORDLESS PRUNING SAW ASSEMBLY AND OPERATION The pruning saw is intended for cutting only wood and branches up to a diameter of 3.15 inches ( 8cm). CHECKING THE BATTERY CHARGER STATUS The level of charge remaining in the battery can be checked by using the battery LED power indicator that is contained on the end of the battery.
Page 16
NOTES: 1. When the charger is plugged into the wall receptacle and NO battery is on the charger, the green indicator light (5) will turn ON indicating the charger is “live”. 2. When a discharged battery is installed on the charger, the green indicator light will turn OFF and the red indicator light (6) will turn ON.
Page 17
5240-051 20V MAX LI ION CORDLESS PRUNING SAW WARNING: Do not install the battery car- tridge forcibly. If the cartridge does not slide in easily, it is not being inserted correctly. OPERATING THE TRIGGER AND SAFETY LOCK OUT The saw chain is equipped with both a lock-o and trigger switch. To turn the saw chain ON: 1.
Page 18
REMOVING OR INSTALLING SAW CHAIN WARNING: Cutting edges on chain are sharp. Always use protective gloves when handling the chain. WARNING: The saw chain and the guide bar are still hot just after the operation. Let them cool down enough before carrying out any work on the tool. WARNING: Carry out the procedure of installing or removing saw chain in a clean place free from sawdust and the like.
Page 19
5240-051 20V MAX LI ION CORDLESS PRUNING SAW ADJUSTING SAW CHAIN TENSION WARNING: The saw chain is not yet tensioned. NOTE: New saw chains will stretch. Check the chain tension frequently when first used and tighten when the chain becomes loose around the guide bar.
Page 20
WORKING WITH THE CORDLESS PRUNING SAW WARNING: The first time user should, as a minimum practice, do cutting logs on a sawhorse or cradle. WARNING: Secure round pieces against rotation. WARNING: Keep all parts of the body away from the saw chain when the motor is operating.
Page 21
5240-051 20V MAX LI ION CORDLESS PRUNING SAW If you try to cut off thick branches from the bottom, the branch may close in and pinch the saw chain in the cut. If you try to cut off thick branches from the top without a shallow undercut, the branch may splinter.
MAINTENANCE GENERAL WARNING: When servicing this tool, use only identical replacement parts. The use of any other part may create a hazard or cause product damage. DO NOT use solvents when cleaning plastic parts. Plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use a clean cloth to remove dirt, dust, oil, grease etc.
Page 23
5240-051 20V MAX LI ION CORDLESS PRUNING SAW LITHIUM-ION BATTERY PERFORMANCE Lithium-ion batteries perform best and deliver peak output power at room temperature (20℃ or 68℉). When operated in lower temperatures, the battery output will be reduced and it will NOT function below -20℃(14℉). The output power will increase as the heat generated by the battery during use increases the internal temperature of the battery.
5240-051 20V MAX LI ION CORDLESS PRUNING SAW PARTS LIST WARNING:When servicing, use only original equipment replacement parts. The use of any other parts may create a safety hazard or cause damage to the saw Any attempt to repair or replace electrical parts on this impact driver may For more information, call the Toll-free Helpline, at 1-866-349-8665;...
Page 26
Key # Part # Part Name Quantity 33CC0100101 jump ring 3221930101155001 sprocket 3221930101098001 socket head wrench 3121930101001001 left casing 3422910101032001 microswitch 3121930101157001 switch the trigger 3221930301060001 spring 3421930101027001 In terminal 1 3421930201027001 In terminal 2 3421930301027001 In terminal 3 3421930401027001 In terminal 4 3121810101039001 Battery pack with bracket...
WARRANTY CORDLESS PRUNING SAW WARRANTY If this Radley tool fails due to a defect in material or workmanship within three years from the date of purchase, return it to any Home Hardware store with the original bill of sale for exchange. Two years for battery and charger. This warranty does not include expendable parts including but not limited to blades, brushes, belts and light bulbs.