Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Samsung ARTIK 530s
Summary of Contents for Samsung ARTIK 530s
- Page 1 ARTIK 530s Development Kit Overview Arrow.com. Downloaded from...
-
Page 2: Table Of Contents
Reset Pushbutton Switch............................10 Power-Key Pushbutton Switch ..........................10 Boot Mode DIP Switches............................. 11 Interposer to Platform Board Connectors........................11 ARTIK 530s Development Kit Platform Board ......................... 14 SD Card Interface............................... 15 Audio Interface................................15 USB Host 2.0 Interface..............................17 ARTIK JTAG ..................................17 Power Jack...................................17... - Page 3 Figure 9. Location of PWR_KEY Pushbutton Switch on the Interposer Board..............10 Figure 10. ARTIK 530s Development Kit Platform Board (Left - Bottom Side, Right - Top Side........14 Figure 11. Location of SD Card Interface on the Platform Board ..................15 Figure 12.
-
Page 4: Version History
Samsung Semiconductor, Inc. ARTIK 530s Development Kit ERSION ISTORY Revision Date Description V1.0 November 30, 2017 Initial draft of ARTIK 530s Development Kit Overview. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Downloaded from Downloaded from Downloaded from Downloaded from... -
Page 5: Artik 530S Development Kit Contents
ARTIK 530s Interposer board (contains ARTIK 530s module) • ARTIK 530s Platform board (connected to the Interposer board at the factory) • ARTIK 530s I/O Expander board (connects to the Platform board for I/O expansion) • Bluetooth/WiFi antenna (for general purpose wireless communication) •... -
Page 6: Artik 530S Development Kit Overview
The ARTIK 530s Development Board consists of one Interposer Board, one Platform Board and one I/O Expander board. The Interposer board includes the ARTIK 530s module which is soldered to the board at the factory. The ARTIK 530s Development Platform is an affordable approach for developing an IoT solution. The ARTIK 530s ®... -
Page 7: Development Kit Block Diagram
Samsung Semiconductor, Inc. ARTIK 530s Development Kit Development Kit Block Diagram Figure 2 shows a system block diagram of the three boards in the ARTIK 530s module development platform and the relative location of each interface. Board Platform Board Interposer Board... -
Page 8: Artik 530S Development Kit Interposer Board
The ARTIK 530s Development Platform contains the ARTIK 530s module that is soldered to the Interposer board. Table 1shows the main features of the ARTIK 530s module. For more information on the ARTIK 530s module please consult the ARTIK 530s module datasheet. -
Page 9: Usb Otg
OARD NTERFACES The following subsections describe the various interfaces present on the ARTIK 530s Interposer board. USB OTG The Interposer board has one USB OTG connector located as can be seen in Figure 4. The USB OTG port can be used to program the module. -
Page 10: Figure 5. Location Of Hdmi Port On Interposer Board
Samsung Semiconductor, Inc. ARTIK 530s Development Kit Figure 5. Location of HDMI Port on Interposer Board LVDS The Interposer board has one LVDS Interface containing 5x data channels and one clock channel, its location can be seen in Figure 6. The available maximum resolution is 1920 x 1080 @ 60fps. -
Page 11: Figure 7. Location Of Ethernet Port On The Interposer Board
Samsung Semiconductor, Inc. ARTIK 530s Development Kit Figure 7. Location of Ethernet Port on the Interposer Board Antennas ® If 802.11, Bluetooth , or Zigbee functionality is required, two antennas are included as part of the ARTIK Development Kit. 530s These antennas are attached to coaxial connectors on the Interposer board as shown in Table 2. -
Page 12: Reset Pushbutton Switch
Samsung Semiconductor, Inc. ARTIK 530s Development Kit Zigbee JTAG The Interposer board contains a dedicated Zigbee JTAG connector. This connector is used only for debug of the on- board Zigbee controller in case the Flashing of firmware to the controller is required. As such, this connector cannot be used for system debug. -
Page 13: Boot Mode Dip Switches
The Interposer board contains 4 DIP switches that are used to configure the system to boot from on-module eMMC memory, SD card, or the USB OTG port. For more information, refer to the section entitled ARTIK 530s Development Kit Boot Mode Configuration. - Page 14 Samsung Semiconductor, Inc. ARTIK 530s Development Kit Table 3. CON400 HIROSE Connector to ARTIK Module Pin Mapping (Continued) Left Side of Connector (odd numbered pins) Right Side of Connector (even numbered pins) Module HIROSE HIROSE HIROSE HIROSE Module Module Pin...
- Page 15 Samsung Semiconductor, Inc. ARTIK 530s Development Kit Table 4. CON401 HIROSE Connector to ARTIK Module Pin Mapping (Continued) Left Side of Connector (odd numbered pins) Right Side of Connector (even numbered pins) Module HIROSE HIROSE HIROSE Module Module Pin HIROSE...
-
Page 16: Artik 530S Development Kit Platform Board
ARTIK 530s Development Kit ARTIK 530 EVELOPMENT LATFORM OARD The main components of the Platform board is shown in Figure 10. Figure 10. ARTIK 530s Development Kit Platform Board (Left - Bottom Side, Right - Top Side Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. -
Page 17: Sd Card Interface
Samsung Semiconductor, Inc. ARTIK 530s Development Kit SD Card Interface The Platform board has one SD-CARD interface supporting SD3.0 located as shown in Figure 11. Figure 11. Location of SD Card Interface on the Platform Board Audio Interface The Platform board has one 4-pin audio jack interface supporting stereo audio as shown in Figure 12. -
Page 18: Figure 13. Location Of Mipi Dsi Connector On The Platform Board
Samsung Semiconductor, Inc. ARTIK 530s Development Kit MIPI CSI/DSI Interface The Platform board has one MIPI DSI and one MIPI CSI interface. The location of the DSI Display interface is shown in Figure 13. The location of the MIPI CSI interface is shown in Figure 14. -
Page 19: Usb Host 2.0 Interface
Samsung Semiconductor, Inc. ARTIK 530s Development Kit USB Host 2.0 Interface The Platform board has two USB 2.0 Interfaces. The location of these interfaces is shown in Figure 15. Figure 15. Location of the USB2.0 Interface Ports on the Platform Board ARTIK JTAG The Platform board contains a JTAG port for communication with an external JTAG debugger. -
Page 20: Power Switch
The pinout of this connector is shown in Table 5, along with a mapping to the ARTIK module pinout where applicable. The pin assignments are noted on the silkscreen of the Platform board. The odd-numbered pins are closest to the edge of the board. Table 5. ARTIK 530s GPIO Expansion Header Pinout Module Header... - Page 21 Samsung Semiconductor, Inc. ARTIK 530s Development Kit Table 5. ARTIK 530s GPIO Expansion Header Pinout (Continued) Module Header Header Module ARTIK Module Header Pin Header Pin ARTIK Module Pin Name Name Name Pin Name Number Number Number Number MICOM_GPIO13 AP_AGP1...
-
Page 22: Artik 530S Development Kit I/O Expander Board
Table 6 and Table 7 show the pinouts of the J2 and J3 connectors respectively. Note that for the J3 connector, no pins of this connector originate from the ARTIK module. Hence there is no connector pin to module pin mapping shown. Figure 18. ARTIK 530s Development Kit I/O Expander Board Table 6. I/O Expander Board J2 Connector Pinout Module... -
Page 23: I/O Expander Board Power Source
Samsung Semiconductor, Inc. ARTIK 530s Development Kit Table 6. I/O Expander Board J2 Connector Pinout (Continued) Module Module ARTIK Module ARTIK Module Pin Name Pin Name Pin Name Number Number Pin Name Number Number MICOM_GPIO1 ADD_XUART0_RX PAL23 AP_UART_RX4 ADD_XUART0_TX PAK23... -
Page 24: Artik 530S Configuration
DC-5V Adapter can be connected at the same time. Figure 19 shows the default settings and how to switch between the settings. When the ARTIK 530s Development Board is used with an external power adapter make certain that you use a 5V, 5A adapter with a 2.1 x 5.5mm plug. -
Page 25: Artik 530S Development Kit Boot Mode Configuration
ARTIK 530s Development Kit ARTIK 530s Development Kit Boot Mode Configuration The ARTIK 530s Interposer board contains a 4-position DIP switch that is used to select the boot source. The location of this switch is shown in Figure 20. Figure 20. Location of Boot Configuration DIP Switches on the Interposer Board The ARTIK 530s development platform provides numerous boot-up options for configuring the device. - Page 26 USB OTG port. No other USB ports can be used to boot the system. This option is NOT recommended due to the complexities required to write the boot image into the eMMC memory, including the requirement for connection to a Linux host. For more information on the boot process, refer to the document entitled ARTIK 530s System Design Guide. Arrow.com. Arrow.com.
-
Page 27: Artik 530S Software Configuration
ARTIK 530s Development Kit ARTIK 530s Software Configuration This section describes the software configuration for the ARTIK 530s Development Kit in both the Windows and Linux Operating environments. This section assumes that power has been applied to the development kit. If not, refer to the section below. - Page 28 Samsung Semiconductor, Inc. ARTIK 530s Development Kit 2. Once the Device Manager window is open, plug the micro-USB cable into the micro-USB connector on the ARTIK board. Check the COM number associated with the ARTIK board after connecting to the USB port. In screen shot below the board is mapped to COM3.
- Page 29 Samsung Semiconductor, Inc. ARTIK 530s Development Kit 4. Set up the PuTTY console with the following parameters: – Serial line is the COM port number found previously as described above – Set speed to 115200 – Set connection type to Serial –...
-
Page 30: Linux Based Configuration
$ dmseg | tail | grep tty The following information is displayed: Set up a Serial Console Samsung recommends Linux users install one of the following free programs to provide a serial console for communicating with the ARTIK development kit. •... - Page 31 Samsung Semiconductor, Inc. ARTIK 530s Development Kit 2. Use the appropriate letter below to select which port settings to change. Hit Enter after making a selection. 3. Select the option ‘Save setup as dfl’ and then exit the Minicom screen...
-
Page 32: Figure 21. Artik 530S Interposer And Platform Board Mechanical Specifications
Samsung Semiconductor, Inc. ARTIK 530s Development Kit ECHANICAL PECIFICATIONS Figure 21 shows the mechanical specifications for the ARTIK 530s Interposer and Platform boards. NTERPOSER OARD LATFORM OARD Figure 21. ARTIK 530s Interposer and Platform Board Mechanical Specifications Arrow.com. Arrow.com. Arrow.com. - Page 33 Electronics. No license of any patent, copyright, mask work, trademark or any other intellectual property right is granted by one party to the other party under this document, by implication, estoppel or other-wise. Samsung products are not intended for use in life support, critical care, medical, safety equipment, or similar applications where product failure could result in loss of life or personal or physical harm, or any military or defense application, or any governmental procurement to which special terms or provisions may apply.