Page 1
Freezer User manual BVF404W EN / 58 5791 0000/AE...
Page 2
Dear Customer, Please read this user manual before using the product. Thank you for preferring this product. We hope that you get the best results from your product which has been manufactured with high quality and state-of- the-art technology.. Therefore, please read this entire user manual and all other accompanying documents before using the product.
7.2 Protecting the plastic surfaces ..20 2.1.Compliance with the WEEE Directive 8 Troubleshooting and Disposing of the Waste Product: .. 9 9 Beko Customer Care 2.2.Compliance with RoHS Directive ..9 2.3.Package information ......9 3 Your Freezer 4 Installation 4.1 Appropriate Installation Location .11...
1- Safety Instructions • This section contains safety This product should not be used outdo- instructions that will help you to be ors with or without a tent above it such protected against risks of personal as boats, balconies or terraces. Do not injury or property damage.
Safety instructions 5. Keep the product in a way that it will • Do not touch the power plug with wet hands. not tip over. • Remove the plug from the socket by 6. Do not allow children play with the old gripping the plug and not the cable.
Safety instructions product may tip over and cause grounded socket that conforms injuries. the voltage, current and frequency • The installation location must be values stated on the type label of dry and well ventilated. Do not place the product. The socket must be carpets, rugs or similar covers under equipped with a 10 A –...
Page 7
Safety instructions • Do not climb on the product. There is • Do not use mechanical devices the risk of falling and getting injured! or other means to accelerate the • Do not damage the pipes of the defrosting process, other than those cooling system with sharp or recommended by the manufacturer •...
Safety instructions • Cooling system of your product 1.7 Maintenance and contains R600a refrigerant: Type of cleaning safety the refrigerant used in the product • Do not pull from the door handle is indicated on the type label. This if you need to move the product refrigerant is flammable.
Environment instructions 2.1.Compliance with the 2.2.Compliance with WEEE Directive and Disposing RoHS Directive The product you have purchased of the Waste Product: complies with RoHS Directive This product complies with EU WEEE (2011/65/EU). It does not contain harmful Directive (2012/19/EU). This product and prohibited materials specified in the bears a classification symbol for waste Directive.
Your Freezer 1. Control Panel 2. Door shelf 3. Glass shelves 4. Drawers 5. Adjustable front feet Figures that take place in this instruction manual are schematic and may not correspond exactly with your product. If the subject parts are not included in the product you have purchased, then it is valid for other models.
Installation 4.1 Appropriate • Appropriate air ventilation must be provided around your product in order Installation Location to achieve an efficient operation. If the product is to be placed in a recess in Contact an Authorized Service for the the wall, pay attention to leave at least installation of the product.
Installation 4.2 Installing the 4.4 Electrical Connection Plastic Wedges WARNING: Do not make Plastic wedges supplied with the connections via extension cables or multi-plugs. product are used to create the distance for the air circulation between the WARNING: Damaged product and the rear wall. power cable must be replaced by the Authorized 1.
Installation 4.5 Door Open Warning 4.7 Changing the door *May not be available in all models opening direction An audio warning signal will be given Door opening direction your when the door of your product is left refrigerator can be changed according open for at least 1 minute.
Preliminary preparation 5.1.What to do for • Food packages should not be in direct contact with the heat sensor located energy saving in the cooler compartment. The food Connecting product should be 10 cm away from the sensor. electronic energy-saving In case of contact with the sensor, systems is harmful, as it may energy consumption of the device may...
Page 16
A sound will be heard when the compressor is engaged. It is normal to hear sound even when the compressor is inactive, due to the compressed liquids and gasses in the cooling system. It is normal for the front edges of the refrigerator to be warm.
Operating the product 6.1 Indicator panel 1.On/Off Indicator: 4.Power failure/High temperature / This icon ( ) come on when the freezer error warning indicator : is turned off. All the other icons turn off. This light ( ) illuminates during power failure, high temperature failures and 2.Economic Usage Indicator: error warnings.
Page 18
Operating the product 7.Key Lock Mode: Quick Freeze function will be cancelled Press Key Lock ( ) button continuously automatically 52 hours later if you do not for 3 seconds. Key lock icon will light cancel it manually. If you want to freeze up and key lock mode will be activated.
Operating the product 6.2 Freezing fresh food 4. Do not try to freeze a large quantity of food at a time. Within 24 hours, • Wrap or cover the food before placing this product can freeze the maximum them in . food quantity specified as «Freezing •...
Operating the product Cooler Compartment Remarks Settings -20°C This is the default, recommended setting. These settings are recommended when the ambient temperature -21, -22, -23 is higher than 30°C or when you think the refrigerator is not cool or -24°C enough due to frequent opening and closing of the door.
Maintenance and cleaning • Never use cleaning agents or water Cleaning your fridge at regular inter- that contain chlorine to clean the vals will extend the service life of the outer surfaces and chromium coated product. parts of the product. Chlorine causes WARNING: corrosion on such metal surfaces.
Troubleshooting Check this list before contacting the • Defrosting is active. >>> This service. Doing so will save you time is normal for a fully-automatic and money. This list includes frequent defrosting product. The defrosting is complaints that are not related to faulty carried out periodically.
Page 23
Troubleshooting • The freezer or cooler door may be The temperature in the cooler or the ajar. >>> Check that the doors are freezer is too high. fully closed. • The cooler compartment temperature • The product may be set to is set to a very high degree.
Page 24
Troubleshooting There is sound of wind blowing • The product is not standing in full coming from the product. upright position on the ground. >>> • The product uses a fan for the cooling Adjust the stands to balance the process.
If after checking the points above, the problem still exists, please call our Beko Customer Care hotline as listed below:- If calling from Australia..Beko Customer Care and talk to one of our consultants. Toll Free Toll Free 1300AUBEKO 1300 282 356 Email:Beko.care@Beko.com *...