Courier 1000 EN-1 TABLE OF CONTENTS INTRODUCTION ............................2 1.1. Safety Precautions ...........................2 1.2. Intended Use ............................2 1.3. Control Functions .............................3 INSTALLATION ............................4 Packing List ..............................4 Selecting the Location ..........................4 Power Supply Connection ........................4 2.3.1 AC Adapter Power ..........................4 2.3.2 Battery Power ............................4 OPERATION ..............................5...
Any other type of use and operation beyond the limits of technical specifications, without written consent from OHAUS, is considered as not intended. This instrument complies with current industry standards and the recognized safety regulations;...
Courier 1000 EN-3 1.3. Control Functions Figure 1-2 Courier 1000 Control Panel Button On/Zero Units Turn on the scale. Change the weighing unit. Primary Function (Short Press) If the scale is On, set the Enter Dynamic Weighing or Weigh ...
EN-4 Courier 1000 2. INSTALLATION Packing List Item Description Picture Quantity Courier 1000 scale AC adapter Selecting the Location Rapid temperature Air current or excessive Avoid heat sources Allow sufficient space changes vibrations Power Supply Connection 2.3.1 AC Adapter Power The AC adapter (included) may be used to supply power to the scale when battery power is not available.
Courier 1000 EN-5 3. OPERATION Turning On/Off the Scale To turn the scale on, short press the ON/ZERO Off button. The scale performs a display test, momentarily displays the model/software version, and then enters the weighing mode. To turn the scale off, long press ON/ZERO Off button until OFF is displayed.
EN-6 Courier 1000 4. CALIBRATION For best results, calibrate the scale at regular intervals. (Calibration weights are not supplied with the scale.) Caution: use extreme care when handling calibration weights as they are very heavy. Improper lifting methods or misuse of calibration weights may result in personal injury. Multiple weights may be used to equal the required calibration weight.
Courier 1000 EN-7 Calibration Locking By use of the internal switch, the calibration function may be locked (disabled), and unauthorized recalibration prevented. With the scale powered off, remove the cover under the display by unscrewing the two screws at the bottom.
For service assistance or technical support in the United States call toll-free 1-800-526-0659 between 8.00 AM and 5:00 PM EST. An Ohaus product service specialist will be available to help. Outside the USA, please visit our website, www.ohaus.com to locate the Ohaus office nearest you.
Courier 1000 EN-9 6. TECHNICAL DATA Specifications Equipment Ratings: Indoor use only Altitude: 2,000m/6,562ft Operating temperature: 5℃ to 40℃ (41℉ to 104℉) Humidity: Maximum relative humidity 80% for temperatures up to 31℃ (87.8℉) decreasing linearly to 50% relative humidity at 40℃ (104℉).
Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012, UK Electromagnetic Compatibility Regulations 2016 and Electrical Equipment (Safety) Regulations 2016. The UK Declaration of Conformity is available online at www.ohaus.com/uk-declarations. This product complies with the EU Directive 2012/19/EU (WEEE). Please dispose of this product in accordance with local regulations at the collecting point specified for electrical and electronic equipment.
Page 15
OHAUS products are warranted against defects in materials and workmanship from the date of delivery through the duration of the warranty period. During the warranty period OHAUS will repair, or, at its option, replace any component(s) that proves to be defective at no charge, provided that the product is returned, freight prepaid, to OHAUS.