Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for jbc PHNE Series
- Page 1 INSTRUCTION MANUAL PHNE Preheater for PCBs up to 11x7cm/4x3”...
-
Page 2: Packing List
This manual corresponds to the following references: PHNE-1A (120V) PHNE-2A (230V) PHNE-9A (100V) Packing List The following items are included: Preheater Unit for PCBs Console ............1 unit 11x7cm/4x3”........1 unit Ref. ACE-A up to RJ45 Cable ..........1 unit Power Cord ...........1 unit Ref. - Page 3 w w w.jbctools.com Features Heater Unit Heating Area Led Status Indicator: ·Blue: Ready to Use ·Green: Working Fixing brackets for ·Red: System Error PHNS Preheater Support Thermocouple Connectors Main Switch (Type K) RJ45 Connector Power Socket to Console USB-B Connector Pedal Connector Console Button for foot...
-
Page 4: Work Screen
Work Screen The Console offers an intuitive user interface which provides quick access to station parameters. 14:15 Status Indicator Max. Rate 14:15 Status Bar º 1.6ºC/s Max. Heating Max. Rate Rate Instant Power º 1.6ºC/s º Selected 120 Supplied to TC1 Current Heater and Selected... -
Page 5: Recommended Guidelines
w w w.jbctools.com Setting Thermocouples Function Select Thermocouples from the Work mode menu to set them up. The thermocouples (TC) can work in three diferent ways depending on what is needed. · Control: the unit mantains the selected temperature. · Protection: the Heater Unit stops if the TC reaches the selected temperature. ·... -
Page 6: Work Mode
14:15 Work Mode Max. Rate º 1.6ºC/s Temperature Mode: Select Temp. mode from the Work mode menu. In this mode the heater unit maintains the selected Selected 120 º temperature for the TC1 thermocouple as long as the other TC’s do not reach the control/protection temperature limit. - Page 7 14:15 Work Mode Selected power w w w.jbctools.com Temperature Mode: This function allows you to set a maximum value for the temperature increase per second when heating. Select Temp. mode from the Work mode menu. In this mode the heater unit maintains the selected temperature for the TC1 thermocouple as long as the other TC’s do not reach the control/protection The maximum heating rate value can be set between 0.1ºC/s and 2.0ºC/s (2) or “None”...
- Page 8 Profile Modes Select Profile Mode from the Work Mode Menu. In this mode the heater unit regulates the temperature of the TC1 thermocouple according to the selected profile as long as the other TCs do not reach the control/protection temperature limit. 14:15 PROFILE1 Stop...
-
Page 9: Profile Editor
JBC Set Profiles There are 3 profiles predefined by JBC: A, B and C. The difference between them is the number of steps: 2, 3 or 4. The thicker your PCB is and the more layers it contains, the more steps are needed to obtain a gradual warming. -
Page 10: Process Analysis
Process Analysis By pressing Graphics in the main MENU, temperature of TC1 thermocouple and power fi gures in real time are displayed. Graphics 14:15 Power (%) Temperature (ºC) Power [%] Ext. Temp [ºC] Switch Y Axis Between Power and Temperature System Notifications The following icons will be displayed on the screen’s status bar. - Page 11 Insert a USB flash drive into the USB-A connector to export / import profiles. Update the Station Software 1. Download the JBC Update File from 2. Insert the USB flash drive to the console. www.jbctools.com/software.html and save The icon is diplayed while updating.
- Page 12 - Only if it is absolutely necessary and if cleaning with isopropyl alcohol (IPA) is not enough, it is recommended to use a scraper to remove dirt in the glass area. - Replace any defective or damaged parts. Use original JBC spare parts only. - Repairs should only be performed by a JBC authorized technical service.
- Page 13 w w w.jbctools.com Notes...
- Page 14 Notes...
-
Page 15: Specifications
- Temperature Range: 50 - 250 °C / 120 - 482 ºF - Temperature Measurement: Thermocouple type K - JBC Set Temperature Profiles: 3 profiles (2, 3 or 4 steps) - User Profiles: 20 (up to 6 steps for each) - Page 16 In order for the warranty to be valid, equipment must be returned, postage paid, to the dealer where it was purchased. Get 1 extra year JBC warranty by registering here: https://www.jbctools.com/productregistration/ within 30 days of purchase. This product should not be thrown in the garbage.