Whirlpool WEE515S0LS Owner's Manual
Front control electric freestanding range
Hide thumbs
Also See for WEE515S0LS:
- Control manual (25 pages) ,
- Owner's manual (40 pages) ,
- User manual
Table of Contents
Advertisement
Quick Links
FRONT CONTROL ELECTRIC FREESTANDING RANGE
Table of Contents
RANGE SAFETY.............................................................. 2
Range Safety ............................................................. 2
RANGE MAINTENANCE AND CARE................................... 4
Self-Cleaning Cycle (on some models) ............................ 4
General Cleaning........................................................ 4
INSTALLATION INSTRUCTIONS ........................................ 6
REQUIREMENTS ............................................................. 6
Tools and Parts .......................................................... 6
Location Requirements ................................................ 6
Electrical Requirements - U.S.A. Only ............................. 7
INSTALLATION ............................................................... 8
Unpack Range ........................................................... 8
Install Anti-Tip Bracket ................................................. 8
Adjust Leveling Legs ................................................... 9
Level Range ............................................................ 10
Electrical Connection - U.S.A. Only ............................... 10
Verify Anti-Tip Bracket Is Installed and Engaged .............. 15
Remove/Replace Drawer............................................ 15
Oven Door............................................................... 15
Complete Installation ................................................. 16
Moving the Range ................................................................16
IMPORTANT:
Save for local electrical inspector's use.
W11432244A
©2020 All rights reserved.
Used under license in Canada.
OWNER'S MANUAL
Advertisement
Table of Contents
Related Manuals for Whirlpool WEE515S0LS
Summary of Contents for Whirlpool WEE515S0LS
-
Page 1: Table Of Contents
FRONT CONTROL ELECTRIC FREESTANDING RANGE OWNER'S MANUAL Table of Contents RANGE SAFETY.............. 2 Range Safety ............. 2 RANGE MAINTENANCE AND CARE........4 Self-Cleaning Cycle (on some models) ......4 General Cleaning............4 INSTALLATION INSTRUCTIONS ........6 REQUIREMENTS ............. 6 Tools and Parts ............6 Location Requirements .......... -
Page 2: Range Safety
RANGE SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word “DANGER”... - Page 3 IMPORTANT SAFETY INSTRUCTIONS � Do Not Leave Children Alone - Children should not be left � Do Not Soak Removable Heating Elements – Heating alone or unattended in area where appliance is in use. elements should never be immersed in water. They should never be allowed to sit or stand on any part �...
-
Page 4: Range Maintenance And Care
RANGE MAINTENANCE AND The oven light will not function during the Self-Cleaning cycle. Electronic Oven Control with Adjustable Clean Time (on CARE some models) The Self-Cleaning cycle is time adjustable between 2 hours 30 Self-Cleaning Cycle (on some minutes and 4 hours 30 minutes in 30-minute increments. models) Suggested clean times are 2 hours 30 minutes for light soil and 4 hours 30 minutes for heavy soil. - Page 5 CERAMIC GLASS COOKTOP CLEANING Cleaning Method: � Soap and water: Pull knobs straight away from control panel to Cleaning Method: remove To avoid damaging the cooktop, do not use steel wool, abrasive powder cleansers, chlorine bleach, rust remover, or ammonia. CONTROL PANEL AND OVEN DOOR EXTERIOR To avoid damage to the control panel, do not use abrasive 1.
-
Page 6: Installation Instructions
It is recommended that all electrical connections be made by a licensed, qualified electrical installer. NOTE: Be sure to purchase only Whirlpool factory-certified parts and accessories for your appliance. Your installation may require additional parts. To order, refer to the contact information... -
Page 7: Electrical Requirements - U.s.a. Only
WARNING: Improper connection of the equipment-grounding Cabinet Dimensions conductor can result in a risk of electric shock. Check with a Cabinet opening dimensions shown are for 25" (64.0 cm) qualified electrician or service technician if you are in doubt as to countertop depth, 24"... -
Page 8: Installation
3. To remove cardboard bottom, first take 4 cardboard corners If connecting to a 3-wire system: from the carton. Stack one cardboard corner on top of Local codes may permit the use of a UL listed, 3-wire, 250 V, 40 or another. -
Page 9: Adjust Leveling Legs
Adjust Leveling Legs 3. Determine and mark centerline of the cutout space. The mounting can be installed on either the left-side or right-side of 1. If range height adjustment is necessary, use a wrench or pliers the cutout. Position mounting bracket against the wall in the to loosen the four leveling legs. -
Page 10: Level Range
Level Range 3. Remove plastic tag holding three 10-32 hex nuts from the middle post of the terminal block. 1. Place level on the oven bottom, as indicated in one of the two figures below, depending on the size of the level. Check with the level side to side and front to back. - Page 11 6. Connect line 2 (red) and line 1 (black) wires to the outer 4-Wire Connection: Power Supply Cord terminal block posts with 10-32 hex nuts. Use this method for: 7. Securely tighten hex nuts. � New branch-circuit installations (1996 NEC) NOTE: For power supply cord replacement, use only a power �...
- Page 12 3. Remove plastic tag holding three 10-32 hex nuts from the Install Using Direct Wire middle post of the terminal block. WARNING Electrical Shock Hazard Disconnect power before servicing. Use 8 gauge copper or 6 gauge aluminum wire. Electrically ground range. Remove the top 10-32 hex nut from each of the 3 terminal blocks and set aside.
- Page 13 3. Pull the wires through the strain relief on bottom of range. Direct Wire Installation: Copper or Aluminum Wire Allow enough slack to easily attach wiring to the terminal This range may be connected directly to the fuse disconnect or block.
- Page 14 6. Use 3/8" nut driver to connect the neutral (white) wire to the 2. Attach terminal lugs to line 2 (red), bare (green) ground, and center terminal block post with one of the 10–32 hex nuts. line 1 (black) wires. Loosen (do not remove) the setscrew on the front of the terminal lug and insert exposed wire end through bottom of terminal lugs.
-
Page 15: Verify Anti-Tip Bracket Is Installed And Engaged
Verify Anti-Tip Bracket Is Installed 8. Move the range into its final location. Check that the range is level by placing a level on the oven bottom. See the “Level and Engaged Range” section. IMPORTANT: If the range is moved to adjust the leveling legs, On Ranges Equipped with a Premium Storage Drawer: verify that the anti-tip bracket is engaged by repeating steps 1 1. -
Page 16: Complete Installation
Moving the Range To Replace: 1. Insert both hanger arms into the door. Be sure that the hinge notches are engaged in the oven door frame. WARNING Tip Over Hazard A child or adult can tip the range and be killed. A.