hit counter code
Toro CCR 2450 GTS Operator's Manual
  1. Manuals
  2. Brands
  3. Toro Manuals
  4. Snow Blower
  5. CCR 2450 GTS
  6. Operator's manual
Toro CCR 2450 GTS Operator's Manual

Toro CCR 2450 GTS Operator's Manual

Snowthrower
Hide thumbs Also See for CCR 2450 GTS:
Table of Contents

Advertisement

Quick Links

Download this manual
CCR
CCR
CCR
Snowthrower
Model No. 38413—000000001 and Up
Model No. 38413—200000001 and Up
Model No. 38419—000000001 and Up
Model No. 38419—200000001 and Up
Model No. 38439—200000001 and Up
Model No. 38440—200000001 and Up
Model No. 38445—200000001 and Up
Operator's Manual
Pour obtenir gratuitement une version en français de ce manuel, écrivez à l'adresse
ci-dessous. N'oubliez pas d'indiquer les numéros de modèle et de série de votre produit.
The Toro Company, Attn: Parts Dept., 8111 Lyndale Ave S, Bloomington, MN 55420–1196
2450 GTS
3600 GTS
3650 GTS
Form No. 3322-820 Rev A
Domestic English (EN)

Advertisement

Table of Contents
loading

Related Manuals for Toro CCR 2450 GTS

Summary of Contents for Toro CCR 2450 GTS

  • Page 1 Pour obtenir gratuitement une version en français de ce manuel, écrivez à l’adresse ci-dessous. N’oubliez pas d’indiquer les numéros de modèle et de série de votre produit. The Toro Company, Attn: Parts Dept., 8111 Lyndale Ave S, Bloomington, MN 55420–1196 Domestic English (EN)

  • Page 2: Table Of Contents

    Contents Introduction Page Thank you for choosing a Toro product. We want you to be completely satisfied with your new purchase. Introduction ....... . .

  • Page 3: Safety

    The operation of any powered machine can result in ANSI/OPEI standard B71.3—1995 and ISO standard foreign objects being thrown into the eyes. Always 8437:1989. Information or terminology specific to Toro wear safety glasses or eye shields during operation or snowthrowers is enclosed in parenthesis.

  • Page 4: Toro Snowthrower Safety

    The following list contains safety information specific to Do not clear snow across the face of slopes. Exercise Toro products or other safety information that you must extreme caution when changing direction on slopes. know that is not included in the ANSI or ISO standards.

  • Page 5: Safety And Instruction Decals

    Toro replacement parts and accessories potential hazard. Store gasoline in a safety approved, to keep the Toro all Toro. Do not use “Will Fit” red metal container. Remove the key from the ignition replacement parts and accessories as they could switch before storing the snowthrower.

  • Page 6: Assembly

    Assembly Note: Determine the left and right sides of the snowthrower by standing in the normal operating position. Loose Parts DESCRIPTION QTY. Carriage bolts Locknuts Installing the discharge chute Discharge chute Plastic bushing Capscrews Installing the chute crank (Models 38439, 38440, and 38445 only) Locknuts Chute crank and mounting bracket...

  • Page 7: Installing The Chute Crank

    Installing the Chute Crank Models 38439, 38440, and 38445 only 1. Insert the flattened end of the chute crank through the hole in the shroud while aligning the mounting bracket with the holes in the lower handle (Fig. 4). Figure 5 1.

  • Page 8: Before Starting

    IMPORTANT: Do not use automotive oil (i.e., SAE 30, 10W30, etc.), a two-cycle oil that is not NMMA- or TCW-certified, or a fuel mixed at the wrong gasoline/oil ratio. This can cause engine damage not covered under the Toro warranty. m–4017/4012 Figure 8 1. Cable 4.
  • Page 9 2. Add the proper amount of high grade, NMMA- or TCW-certified two-cycle oil as directed on the container label. For best results, use Toro 50:1 Two-Cycle Oil. 3. Install the cap on the gasoline container and shake the container to mix the gasoline and oil thoroughly.

  • Page 10: Operation

    40 minutes to allow the starter to cool before attempting to start it again. Note: If you use Toro Heavy Duty 50:1 All Season 2-Cycle Engine Oil with Fuel Stabilizer, you do not need to add a IMPORTANT: Running the electric starter extensively fuel stabilizer/conditioner.

  • Page 11: Throwing Snow

    Throwing Snow WARNING POTENTIAL HAZARD Stones, toys and other foreign objects may be picked up and thrown by the rotor blades. WHAT CAN HAPPEN Thrown objects can cause serious personal injury to operator or bystanders. m-3278 HOW TO AVOID THE HAZARD Keep the area to be cleared free of all objects Figure 11 that could be picked up and thrown by rotor...

  • Page 12: Maintenance

    Maintenance Recommended Maintenance Schedule Service Item Service Operation Initial Annually Comments Check and adjust Control cable Check the control cable. Adjust if necessary. as needed. Drain the fuel and run the engine until the fuel tank Fuel tank and the carburetor are dry. Scraper Check the scraper.

  • Page 13: Emptying The Fuel Tank

    A. Unhook the upper cable end from the hole in the 2. Remove the fuel tank cap and use a pump-type syphon control bar bracket (Fig. 7). to drain the fuel into a clean gasoline container. B. Slide the spring cover up the cable to expose the 3.

  • Page 14: Replacing The Drive Belt

    6. Install the new scraper to the housing using the 4. Loop the new drive belt around the engine pulley, carriage bolts and locknuts. under the idler pulley, over the roller, through the brake assembly, and around the rotor pulley (Fig. 18). Replacing the Drive Belt IMPORTANT: The drive belt must be on top of the roller as shown in Figure 18.

  • Page 15: Replacing The Rotor Blades

    5. Set the spark plug gap (Fig. 21) between the electrodes Note: Replace the scraper whenever you replace the rotor to .032 in. (.81 mm). blades. This ensures proper snowthrower operation and performance. Note: The running time and the roughness of the driveway or the sidewalk determines the wear rate of the rotor .032 in.

  • Page 16: Storage

    2. Thick layer mix it with fresh gasoline. Note: If you use Toro Heavy Duty 50:1 All Season 2-Cycle Install the rotor blades with the thick layer on the Engine Oil with Fuel Stabilizer, you do not need to add a inside of the curve.

  • Page 17: Preparing The Engine

    2. Run the engine for five minutes to distribute the conditioned fuel through the fuel system. 3. Stop the engine, allow it to cool, and drain the fuel tank. 4. Start the engine again and run it until it stops. 5.

  • Page 18: Federal And California Emission Control Warranty Statement

    U.S. EPA standards for the first two years of engine use from the date of sale to the ultimate purchaser. Toro must warrant the emission control system on your utility/lawn/garden equipment engine for the period of time listed above provided there has been no abuse, neglect or improper maintenance of your utility/lawn/garden equipment engine.
  • Page 19 How to Get Warranty Service: Should you feel your TORO Product requires warranty service, contact the dealer who sold you the product or any Authorized TORO Service Dealer or TORO Master Service Dealer. The Yellow Pages of your telephone directory is a good reference source.

  • Page 20: Warranty

    Countries Other than the United States or Canada Customers who have purchased Toro Products exported from the United States or Canada should contact their Toro Dis- tributor (Dealer) to obtain guarantee policies for your country, province, or state. If for any reason you are dissatisfied with your Distributor’s service or have difficulty obtaining guarantee information, contact the Toro importer.

This manual is also suitable for:

Ccr 3600gtsCcr 3650 gts38413384193843938440 ... Show all

Table of Contents