hit counter code
Samsung SMT-W5100 Instruction Manual
  1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Cordless Telephone
  5. SMT-W5100
  6. Instruction manual

Samsung SMT-W5100 Instruction Manual

Hide thumbs Also See for SMT-W5100:
Table of Contents

Advertisement

Quick Links

Download this manual

SAFETY CONCERNS

This document provides the information to prevent bodily injury and property damage.
Please make a good use of our product with its description below.
Conventions
Warning
Provides information or instructions
that the reader should follow in order
to avoid personal injury or fatality.
Caution
Provides information or instructions that
the reader should follow in order to
avoid a service failure or damage to the
system.
Note
Indicates additional information
as a reference.
Checks
Provides the operator with checkpoints
for stable system operation.
Symbols
Caution
Indication of a general caution.
Restriction
Indication for prohibiting an action for
a product
Instruction
Indication for commanding
a specifically required action
1
SMT-W5100 User Guide _

Advertisement

Table of Contents

Troubleshooting

loading

Related Manuals for Samsung SMT-W5100

Summary of Contents for Samsung SMT-W5100

  • Page 1: Safety Concerns

    Note Instruction Indicates additional information Indication for commanding as a reference. a specifically required action Checks Provides the operator with checkpoints for stable system operation. SMT-W5100 User Guide _...

  • Page 2: Warning

    Do not use damaged power cord or loose Always use the battery and charger outlets. provided with the phone. Safety is not guaranteed if expendable items or additional goods are used unauthorized by Samsung. _ © SAMSUNG Electronics Co., Ltd.
  • Page 3 Do not place flower vases, pots, cups, or containers including cosmetics, medicines, etc. near the phone. General Discard the scrapped battery only at designated areas. SMT-W5100 User Guide _...

  • Page 4: Caution

    Disconnect the magnetic forces. This may cause phone from the charger after charging fully malfunction of the phone or discharge of electricity. Keep the battery indoors while it is not in use. _ © SAMSUNG Electronics Co., Ltd.
  • Page 5 Do not place the battery in high Do not strike the phone and battery severely temperatures or heat it. or puncture them with a pinnacle object. General Obey local regulations. Always turn off the phone in prohibited or dangerous places (e.g. hospital). SMT-W5100 User Guide _...
  • Page 6 This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. _ © SAMSUNG Electronics Co., Ltd. This equipment has been tested and found to comply with the limits for a class B digitaldevice, pursuant to part 15 of the FCC Rules.

  • Page 7: Table Of Contents

    Removing the Battery ..................16 Charging the Battery..................17 Checking the Battery Status ................18 Phone Layout....................19 Button Description........................... 20 Icon (Display) Description ........................22 To Turn the Power On..................23 To Turn the Power Off..................23 SMT-W5100 User Guide _...
  • Page 8 To Disable the Automatic Key Lock......................31 Entering Characters..................32 Buttons Used for Entering Characters....................32 How to enter uppercase and lowercase....................32 How to Enter Special Characters ......................34 How to Enter Numbers ........................... 34 _ © SAMSUNG Electronics Co., Ltd.
  • Page 9 Station Message............................40 Camp On..............................41 Features used during receiving a call .............. 42 Call Reject ............................... 42 MENUS Menu Structure ....................43 Phonebook....................... 45 Find Number............................45 Outgoing Calls............................50 Incoming Calls............................51 Missed Calls ............................52 SMT-W5100 User Guide _...
  • Page 10 Volume/Ring ....................71 Incoming Calls Tone..........................71 Connection Tone ............................. 74 Key Tone..............................74 Warning Tone ............................75 Soft Menu ......................76 Station Message............................76 Direct Pickup ............................77 Do Not Disturb............................77 Page ................................ 78 _ © SAMSUNG Electronics Co., Ltd.
  • Page 11 Phone Lock ............................. 90 Intern. Lock (Internal Lock) ........................91 Call Answer.............................. 92 System......................93 Registration ............................. 93 System Setting ............................105 Encryption key............................106 Unregistration ............................107 QoS (WMM: WiFi MultiMedia)......................108 IP&MAC Address ..........................108 SMT-W5100 User Guide _...
  • Page 12 Version Info............................109 Network Setting............................110 SSID Setting............................120 Help ....................... 122 Function Description ..........................122 Troubleshooting............................. 123 TROUBLESHOOTING ANNEX Product Specifications ................... 126 _ © SAMSUNG Electronics Co., Ltd.

  • Page 13: Preparation

    PREPARATION Overview of SMT-W5120 This user guide provides instructions for the use of Samsung’s SMT-W5120 mobile phone. The SMT-W5120 (Wireless IP-Phone Mobile type) is the wireless mobile phone that allows a voice communication through IEEE 802.11 b/g wireless LAN. SMT-W5120 supports voice communication using IEEE802.11 b/g WLAN. Based on IEEE802.11 b/g standard, VoIP voice signals received are compressed to a voice codec and transferred as data packets.

  • Page 14: Unpacking

    After purchasing the SMT-W5120 phone, you have to check that the following items have been packed in the box. Battery Charger Adapter Earphone (standard type) Quick & Installation User Guide/Quick & Installation Leather case SMT-W5120 Reference Guide Reference Guide for phone _ © SAMSUNG Electronics Co., Ltd.

  • Page 15: Installing The Battery

    Installing the Battery Put the lower part of your battery, and then install the battery by pressing the upper part. SMT-W5100 User Guide _...

  • Page 16: Removing The Battery

    Removing the Battery Press the button and the battery is separated and raised as shown in the figure. Lift up and remove the battery. _ © SAMSUNG Electronics Co., Ltd.

  • Page 17: Charging The Battery

    Charging the Battery After checking each component of the phone, charge the battery as shown in the figure below. Charging the battery Charging the battery with phone SMT-W5100 User Guide _...

  • Page 18: Checking The Battery Status

    - Battery is exhausted even if the phone is not used and waiting time will be shortened if additional features are used. - As batteries are expendable, their lifetime gradually decreases. If battery duration is less than half what it was when new, purchase a new one. _ © SAMSUNG Electronics Co., Ltd.

  • Page 19: Phone Layout

    LCD Screen Backlight Button Navigation Button Menu Button Speaker Button 삭제됨: Can Send Button End/Power Button Cancel Button 삭제됨: Hold Transfer Button Hold Button 삭제됨: Spe Dial Buttons Etiquette mode Auto Key Lock Button Button Microphone SMT-W5100 User Guide _...

  • Page 20: Button Description

    Used when selecting or saving the selected item for function settings. Speaker Button Used When selecting speaker phone function. End/Power Button Used when turning the power on/off, when returning to the initial screen or when terminating the call. _ © SAMSUNG Electronics Co., Ltd.
  • Page 21 Transfer Button Used when transferring a call. Send Button Used when calling or receiving a call. Menu Button Used when entering the menu mode. Volume Button Used when controlling the volume of voice or key tone. SMT-W5100 User Guide _...

  • Page 22: Icon (Display) Description

    Indicates that the automatic key lock is enabled. Indicates that the ring type is set as light only (silent). Indicates the battery charging level. : fully charged : sufficient : insufficient : fully discharged (needs to be charged immediately) _ © SAMSUNG Electronics Co., Ltd.

  • Page 23: To Turn The Power On

    Register the phone according to the following procedure: refer to descriptions in [8. System] [1. Registration]. To Turn the Power Off Press the button for more than 2 seconds. The phone will automatically turn off. SMT-W5100 User Guide _...

  • Page 24: Basic Features

    For your convenience there are several ways to make a call. Refer to [1. Phonebook] in ‘Menus’ of this guide for how to use the latest outgoing call numbers, incoming call numbers, missed call numbers and save the new phone number. _ © SAMSUNG Electronics Co., Ltd.

  • Page 25: Using The Dial Keypad

    Press the button for a long time to completely delete all the incorrectly entered numbers at once. Press the button. - Press the button to hang up the phone. SMT-W5100 User Guide _...

  • Page 26: Using The Call Lists

    The outging calls, incoming calls or missed calls lists store up to 99 entries each. If they are all filled up, the oldest phone number will be erased when a new phone number is saved. _ © SAMSUNG Electronics Co., Ltd.

  • Page 27: Using Speed Dial

    Press any button except [Volume] button, button, or button to start a conversation while the phone is ringing. You can set how to answer the incoming call. Refer to [7. Phone Settings] [#. Call Answer] from ‘Menus’ in this guide. SMT-W5100 User Guide _...

  • Page 28: Volume Adjustment

    Select the one of 5 volume levels you want by pressing the [Volume] button in the initial screen. If a key is pressed during a call, the key tone will not be played unless when using an earphone. _ © SAMSUNG Electronics Co., Ltd.

  • Page 29: Voice Volume Adjustment

    Voice Volume Adjustment While having a conversation on the phone, you can adjust the voice volume from the other party. Select the one of 14 volume levels you want by pressing the [Volume] button while having a conversation. SMT-W5100 User Guide _...

  • Page 30: Setting The Etiquette Mode

    To Disable the Etiquette Mode To disable the etiquette mode, press the button for more than 2 seconds on the initial screen. Then the etiquette mode icon disappears. _ © SAMSUNG Electronics Co., Ltd.

  • Page 31: Setting The Automatic Key Lock

    The screen will then display the automatic key lock icon To Disable the Automatic Key Lock To disable the automatic key lock, press the button for more than 2 seconds on the initial screen. Then the automatic key lock icon disappears. SMT-W5100 User Guide _...

  • Page 32: Entering Characters

    The screen will then provide an input field for the character type you selected the other two character types will appear on the menu bar. For example, if [eng] is selected, [ENG/eng/Sym] will appear on the menu bar. _ © SAMSUNG Electronics Co., Ltd.
  • Page 33 To enter characters, press the button where a desired character is displayed repetitively to display the next character. (e.g., If the number [5] button is pressed, the character ‘J’ is entered. If the [5] button is pressed once more, the ‘K’ is entered.) SMT-W5100 User Guide _...

  • Page 34: How To Enter Special Characters

    How to Enter Numbers Press the dial button for more than 2 seconds so that numbers are entered irrespective of which character has been selected from out of the English Uppercase/English Lowercase/Special Characters has been entered. _ © SAMSUNG Electronics Co., Ltd.

  • Page 35: Convenient Features

    Press the button during a phone conversation. Move to [1. Mute(On)] using button, and then press the button. - If you want to resume talking to the phone, press the button again and select [1. Mute(Off)]. SMT-W5100 User Guide _...

  • Page 36: Conference Call While On The Phone

    When the call is connected with the 3 party, press the button. Select the [1. Conference] and then press button. - Up to 5 people can participate in a conference call. _ © SAMSUNG Electronics Co., Ltd.

  • Page 37: Call Transfer

    Press the call number to be transferred. Press the button to hang up. Then the call will be transferred to the third party on hold. - Press the button again in transfer mode to resume the call with the previous caller again. SMT-W5100 User Guide _...

  • Page 38: Holding A Call

    - You can save the telephone number of the present caller - You can dial a number using the Phonebook. - You can dial a number using the Call list. _ © SAMSUNG Electronics Co., Ltd.

  • Page 39: Features On A Calling Failure

    - Your phone will ring when the other party either finishes the call or clears the DND function. Once you pick up your phone, the phone of the other party starts to ring. SMT-W5100 User Guide _...

  • Page 40: Station Message

    If other party is not answering, ‘busy’ or ‘rejecting call’ is set, then press the button. Move to [2. Message] using the button and then press the button. - The icon appears on the other party’s phone. _ © SAMSUNG Electronics Co., Ltd.

  • Page 41: Camp On

    - The urgent sound cannot be heard while the other party is busy. The bell of the other party starts to ring when the other party hangs up the call. SMT-W5100 User Guide _...

  • Page 42: Features Used During Receiving A Call

    If you don’t want to receive a call when phone is ringing, you can use this function. Do the long press on [Volume] button while phone is ringing. Phone stop ringing and phone call is ended. - The number of reject call is saved in the missed calls list _ © SAMSUNG Electronics Co., Ltd.

  • Page 43: Menus

    1. Station Msg Message Phonebook Utilities 2. Schedule 2. Outgoing Calls 2. SMS 3. Incoming Calls 3. Calculator 3. VMS 4. World Time 4. Missed Calls 5. Conversion 5. New Entry 6. Timer 6. Delete List SMT-W5100 User Guide _...
  • Page 44 5. QoS (WMM) 6. LCD Contrast 6. IP&MAC Addr. 7. Cradle Hook 8. Reset 7. Version Info 9. Program Msg 8. Network Setting 0. Phone Lock 9. SSID Setting *. Intern. Lock #. Call Answer _ © SAMSUNG Electronics Co., Ltd.

  • Page 45: Phonebook

    Press the [Menu] button in idle mode, and then select the [1. Phone book] icon to find out various methods to make a call and view the call lists. Find Number This function allows you to search a phone number by name, number and location. SMT-W5100 User Guide _...
  • Page 46 - Use the buttons to move between phone number, and press [Send] button to make the call. - Use the buttons to move between phone number, and press [OK] button to detail information. _ © SAMSUNG Electronics Co., Ltd.
  • Page 47 - Use the buttons to move between phone number, and press [Send] button to make the call. - Use the buttons to move between phone number, and press [OK] button to detail information. SMT-W5100 User Guide _...
  • Page 48 1. Find Number 3. By Location Enter a speed dial number [OK] - If you press the [OK] button without entering a speed dial number, all the numbers in the list saved will be displayed. _ © SAMSUNG Electronics Co., Ltd.
  • Page 49 - To modify the phone number, select [1. Edit] - To delete the phone number, select [2. Delete]. - Using the [Cancel] and [Dial] buttons, modify the phone number and press the [OK] button to save it. SMT-W5100 User Guide _...

  • Page 50: Outgoing Calls

    [Send] button to make the call. - To see the date and time information of an outgoing call, use the buttons to move the number and press [OK] button. _ © SAMSUNG Electronics Co., Ltd.

  • Page 51: Incoming Calls

    [Send] button to make the call. - To see the date and time information of an incoming call, use the buttons to move the number and press [OK] button. SMT-W5100 User Guide _...

  • Page 52: Missed Calls

    [Send] button to make the call. - To see the date and time information of a missed call, use the buttons to move the number and press [OK] button. _ © SAMSUNG Electronics Co., Ltd.
  • Page 53 - To modify the phone number, select [2. Edit] - To delete the phone number, select [3. Delete]. - Using the [Cancel] and [Dial] buttons, modify the phone number and press the [OK] button to save it. SMT-W5100 User Guide _...

  • Page 54: New Entry

    [OK] 5. New Entry Enter name, phone number (home, station, mobile), speed dial number [OK] - You can directly enter the phone number on the idle mode, and save that number using the button. _ © SAMSUNG Electronics Co., Ltd.

  • Page 55: Delete List

    - To delete the list of incoming call numbers, select [3. Del Incoming]. - To delete the list of missed call numbers, select [4. Del Missed]. - To delete all phone number saved in the phonebook and the list of outgoing/incoming/missed calls numbers, select [5. Del All]. SMT-W5100 User Guide _...

  • Page 56: Utilities

    - To disable the alarm, select [2. Reset Alarm]. - To change the alarm melody, select [3. Alarm Melody]. You can choose one among 5 melodies. - When the alarm is set, the alarm icon will appear on the screen. _ © SAMSUNG Electronics Co., Ltd.

  • Page 57: Schedule

    If the alarm is set up as mute, you can directly check what the schedule is on the screen. [MENU] 2. Utilities [OK] 2. Schedule [OK] Select dates [OK] Enter time (Move to the content field) Enter contents (Move to the melody field) (Select Melody) [OK] SMT-W5100 User Guide _...
  • Page 58 - To modify a schedule, select [1. Modify] - To delete a schedule, select [2. Delete]. - To add a schedule, select [3. Add]. - To delete all schedules, select [4. Delete All ]. _ © SAMSUNG Electronics Co., Ltd.

  • Page 59: Calculator

    - When entering negative numbers, press [Auto Key Lock] button, and When incorrect numbers are entered, press the [Cancel] button. - Press the buttons to reuse the result. - Press the [Cancel] button to reset or the [End/Power] button to terminate. SMT-W5100 User Guide _...

  • Page 60: World Time

    This function allows you to check current date and time in each region of the world. [MENU] 2. Utilities [OK] 4. World Time [OK] (Move the meridian line) - The corresponding time of each capital name will be shown. _ © SAMSUNG Electronics Co., Ltd.

  • Page 61: Conversion

    After entering a value, you may select a unit and convert the value into another unit. [MENU] 2. Utilities [OK] 5. Conversion [OK] 1. Length/2. Weight/3. Volume/4. Area/5. Temperature [OK] Enter values (Select a unit to convert) (Move to the target conversion unit field) (Select a desired conversion unit) [OK] SMT-W5100 User Guide _...

  • Page 62: Timer

    - Press the [Menu] button to select [Start]. - If you want to pause the timer for a while, press the [Menu] button to select [Stop]. - When the time is up, the bell stars to ring. _ © SAMSUNG Electronics Co., Ltd.

  • Page 63: Message

    You can send a reply by checking messages received from an extension on the busy state. [MENU] 3. Message [OK] 1. Station Msg [OK] (Select a station number) [OK] 1. Reply [OK] - To connect call, select [1. Reply]. - To delete the message, select [2. Delete]. SMT-W5100 User Guide _...

  • Page 64: Sms (Short Message Service)

    However, if the message does not include the phone number of the person, a call cannot be made. - If there are unchecked messages, is displayed, if there are checked messages, is displayed. _ © SAMSUNG Electronics Co., Ltd.
  • Page 65 - To select the message stored in the Templates, select [2. Template]. - After editing the selected message in the Templates, you can send the message. - Up to 80 characters/numbers including the blank can be written. SMT-W5100 User Guide _...
  • Page 66 - After the message is selected, press the [Menu] button to resend or delete the selected message. - Up to 10 outgoing messages can be saved. - If the message is sent, is displayed, if the message fails to be sent, is displayed. _ © SAMSUNG Electronics Co., Ltd.
  • Page 67 This function allows you to register a new message to the Templates. [MENU] 3. Message [OK] 2. SMS [OK] 3. Templates [OK] 1. New [OK] Enter the character [OK] - Up to 10 messages can be saved in the message box. SMT-W5100 User Guide _...
  • Page 68 (Select the message [OK] - Press the [Menu] button to delete selected message or to delete all messages. - After the message is selected, press the [Menu] button to send, edit, delete the selected message. _ © SAMSUNG Electronics Co., Ltd.
  • Page 69 This function allows you to set alert time that notifies to the user when a message arrives. [MENU] 3. Message [OK] 2. SMS [OK] 4. SMS Settings [OK] 1. Alert Time [OK] (Select the alert time) [OK] SMT-W5100 User Guide _...

  • Page 70: Vms (Voice Mail System)

    This function is available after installing VMS and setting a VMS group. [MENU] 3. Message [OK] 3. VMS [OK] 1. Message [OK] - After accessing the VMS, You can use the soft menu by pressing the [Menu] button. _ © SAMSUNG Electronics Co., Ltd.

  • Page 71: Volume/Ring

    1. Incoming calls tone [OK] 1. Ring Type [OK] (Select ring type) [OK] For information about how to set the etiquette mode, refer to the description of ‘Setting the Etiquette Mode’ section in ‘Basic Features’ of this guide. SMT-W5100 User Guide _...
  • Page 72 This function enables you to select one ring melody out of a selection of 18 melodies. You can select the melody for each type of incoming call (internal/external). [MENU] 4. Volume/Ring [OK] 1. Incoming calls tone [OK] 2. Ring Tone [OK] (Select call type) [OK] (Select melody) [OK] _ © SAMSUNG Electronics Co., Ltd.
  • Page 73 This function enables you to adjust the ring volume. [MENU] 4. Volume/Ring [OK] 1. Incoming calls tone [OK] 3. Ring Volume [OK] (Select ring volume) [OK] You can adjust the volume of the bell by using the [Volume] button. SMT-W5100 User Guide _...

  • Page 74: Connection Tone

    4. Volume/Ring [OK] 2. Connection Tone [OK] (Select On/Off) [OK] Key Tone This function enables you to set the type of key tone. [MENU] 4. Volume/Ring [OK] 3. Key Tone [OK] (Select key tone) [OK] _ © SAMSUNG Electronics Co., Ltd.

  • Page 75: Warning Tone

    Warning Tone This function enables you to hear a warning tone when you move to a shadow zone during a call. [MENU] 4. Volume/Ring [OK] 4. Warning Tone [OK] (Select On/Off) [OK] SMT-W5100 User Guide _...

  • Page 76: Soft Menu

    [MENU] 5. Soft Menu [OK] 1. Station Msg [OK] (Select a station number) [OK] 1. Reply Call is connected. - To connect call, select [1. Reply]. - To delete the message, select [2. Delete]. _ © SAMSUNG Electronics Co., Ltd.

  • Page 77: Direct Pickup

    You can deny all of call requests anytime you want to. [MENU] 5. Soft Menu [OK] 3. DoNotDisturb [OK] (Select On/Off) [OK] - When DND (Do Not Disturb) mode is set up, the ‘DND’ message and the icon will appear on the initial screen. SMT-W5100 User Guide _...
  • Page 78 This function allows you to page through your phone at the specific area in the system. [MENU] 5. Soft Menu [OK] 4. Page [OK] (Select page zone) [OK] My voice is announced through the phone. _ © SAMSUNG Electronics Co., Ltd.

  • Page 79: Conference

    [OK] Group list is displayed (Select a group) [OK] Group members are connected - To modify or delete the group, press the [Menu] button in the group list and then select [1. Edit], or [2. Delete]. SMT-W5100 User Guide _...
  • Page 80 5. Soft Menu [OK] 5. Conference [OK] 1. Group Conf. [OK] 2. Save [OK] Entering group name [OK] Enter phone number of member (Move to next field) Enter phone number of next member [OK] _ © SAMSUNG Electronics Co., Ltd.
  • Page 81 - The mark means that you have connected with the member. - You can retrieve a conference group or a phone number saved in the phone by pressing [Menu] button at the phone number entry screen. SMT-W5100 User Guide _...

  • Page 82: Call Forward

    - When the forward mode is set up, the ‘FWD’ message will appear on the initial screen. - To use the [5. Busy/No Answer] function, the [3. Busy Calls] and [4. No Answer] functions must be set. _ © SAMSUNG Electronics Co., Ltd.

  • Page 83: Phone Settings

    If you save your name in your phone, your name will be displayed on the other party’s phone when you are connected to another party (intercom user). (This applies only when your phone number is not saved in the phonebook of the intercom user.) SMT-W5100 User Guide _...

  • Page 84: Background

    This function enables you to prevent others from using your phone by changing the initial factory set password of the phone. The initial password is set to 0000. [MENU] 7. Phone Settings [OK] Enter a Password 3. Password [OK] Enter new password [OK] Enter new password again [OK] _ © SAMSUNG Electronics Co., Ltd.

  • Page 85: Language

    Language This feature enables you to set the language displayed on the screen of the phone. [MENU] 7. Phone Settings [OK] Enter a Password 4. Language [OK] (Select language) [OK] SMT-W5100 User Guide _...

  • Page 86: Back Light

    - The lighting of the LCD screen turns off automatically unless a button is pressed within 8 seconds. You can also set the lighting duration to 20 seconds or turn off the lighting altogether. - Select ‘Always Off’ to disable the light at all times. _ © SAMSUNG Electronics Co., Ltd.

  • Page 87: Lcd Contrast

    [OK] Cradle Hook This function enables to select call off/on when you charge your phone battery with a charger. [MENU] 7. Phone Settings [OK] Enter a password 7. Cradle Hook [OK] (Select cradle hook option) [OK] SMT-W5100 User Guide _...

  • Page 88: Reset

    - To reset the status of a phone, select [1. Reset All]. All the saved records as well as the phone options are deleted. - To reset the options for the phone functions, select [2. Reset Func.]. _ © SAMSUNG Electronics Co., Ltd.

  • Page 89: Program Msg (Programmed Message)

    - To cancel the programmed message setting, select [2. OFF]. - Up to 20 programmed messages can be selected. - In the programmed message setting, the programmed message is displayed on the caller’s phone screen, when the called attempt to call you. SMT-W5100 User Guide _...

  • Page 90: Phone Lock

    When the Phone lock is set, no keys of the phone will work, and functions other than answering a call cannot be used until you enter the password. [MENU] 7. Phone Settings [OK] Enter a password 0. Phone Lock [OK] _ © SAMSUNG Electronics Co., Ltd.

  • Page 91: Intern. Lock (Internal Lock)

    - To lock an outgoing trunk call, select [2. Lock Outgoing]. At this time, outgoing (incoming) calls are allowed. - To lock all outgoing/incoming trunk/station calls, select [3. Lock All Calls]. - If the lock mode is set up, ‘LCK’ is displayed on the phone screen. SMT-W5100 User Guide _...

  • Page 92: Call Answer

    This function enables you to select the Call Answer Mode for how to answer the incomming call. [MENU] 7. Phone Settings [OK] #. Call Answer (Select the mode) [OK] - You can answer a call by pressing the any button or [Send] button according to the selecting mode. _ © SAMSUNG Electronics Co., Ltd.

  • Page 93: System

    Contact the system administrator to check which mode the system supports, and then select either SIP mode or Non SIP mode. If you want to access FON AP, select Non SIP Mode. (Non SIP mode should be selected for system operation mode.) SMT-W5100 User Guide _...
  • Page 94 - Manual: enter an SSID manually. If you select [Auto] at Step 1, SSIDs are automatically searched. Select an SSID from the list of searched SSIDs. - Ask the system administrator which SSID should be selected. _ © SAMSUNG Electronics Co., Ltd.
  • Page 95 If you have chosen [Manual] at Step 1, directly enter an SSID, and then press [OK]. - SSID: Enter the ESSID set in the WLAN connection device. Consult the system administrator to verify the ESSID. Enter the user ID. SMT-W5100 User Guide _...
  • Page 96 Enter Password set in the system. Set the feature On/Off of WMM (WiFi MultiMedia). - Refer to your system administrator to set On/Off. _ © SAMSUNG Electronics Co., Ltd.
  • Page 97 - In case a WEP key has been enabled, select ASCII Mode or HEX Mode to enter the WEP Key. - In case a WPA_PSK or WPA2_PSK key has been enabled, select AES Mode or TKIP Mode to enter the Encryption Key. SMT-W5100 User Guide _...
  • Page 98 Refer to your system administrator to verify the Encryption key. - If no Encryption key is present, leave it blank and press [OK]. When the phone is successfully registered, the display will appear as on the right. _ © SAMSUNG Electronics Co., Ltd.
  • Page 99 Static IP Mode This function enables to register a phone to the system using a fixed IP address. Enter a phone IP address. Enter the System IP address. SMT-W5100 User Guide _...
  • Page 100 Enter the System Gateway. Enter the System Netmask. The next steps are the same as Step 1 to 9 of System DHCP mode registration. _ © SAMSUNG Electronics Co., Ltd.
  • Page 101 You can use this feature if a separate DHCP server is used or if you attempt to access FON AP. When you move to another site (area shift), you can still use your phone without registering it again. If you want to access FON AP, select [On]; if not, select [Off], and then press [OK]. SMT-W5100 User Guide _...
  • Page 102 If [On] has been selected at Step 1 (FON AP access) Enter an ID for authentication when accessing FON AP. Enter a password for authentication when accessing FON AP. _ © SAMSUNG Electronics Co., Ltd.
  • Page 103 Enter the System IP address. The next step is the same as step 1 to 9 of System DHCP mode. SMT-W5100 User Guide _...
  • Page 104 If [Off] has been selected at Step 1 (normal AP access) Enter the System IP address. The next steps are the same as Step 1 to 9 of System DHCP mode registration. _ © SAMSUNG Electronics Co., Ltd.

  • Page 105: System Setting

    Inquire your system administrator for information on whether the system connected to the phone is Sytem1~System4. To newly register a phone to System2, select System2 and register the phone according to the ‘Phone Registration’ procedure described earlier. SMT-W5100 User Guide _...

  • Page 106: Encryption Key

    3. WPA_PSK/4. WPA2_PSK] (Select Encryption key) [OK] [1. ASCII Mode/2. HEX mode] or [1. AES Mode/2. TKIP mode] (Select Encryption mode) [OK] Enter encryption key [OK] Consult the system administrator and enter the value set on the system. _ © SAMSUNG Electronics Co., Ltd.

  • Page 107: Unregistration

    Enter the password [OK] 4. Unregistration [OK] Enter the password [OK] (Yes/No) [OK] Before execute the [Unregistration], double check whether this function should be executed since all phone information registered to the system will be deleted. SMT-W5100 User Guide _...

  • Page 108: Qos (Wmm: Wifi Multimedia)

    You can use this feature if the AP which your phone is connected to supports the QoS feature. [MENU] 8. System [OK] 5. QoS (WMM) [OK] (Select On/Off) [OK] IP&MAC Address This function enables to show the unique MAC address for each terminal. [MENU] 8. System [OK] 6. IP&MAC Addr. [OK] _ © SAMSUNG Electronics Co., Ltd.

  • Page 109: Version Info

    Version Info You can find out the version number and the date of the software of your handset. [MENU] 8. System [OK] 7. Version Info [OK] SMT-W5100 User Guide _...

  • Page 110: Network Setting

    [MENU] 8. System [OK] 8. Network Setting [OK] (1.Network info/2. System IP/3. Phone IP/4 .FON AP/ 5. DNS setting) [OK] Network info You can view the phone’s network info, system IP, and phone IP. _ © SAMSUNG Electronics Co., Ltd.
  • Page 111 System IP You can change the phone’s system IP, user ID, and password. The changed value can be changed or reregistered. Enter a system IP address. Enter a user ID. SMT-W5100 User Guide _...
  • Page 112 Enter a password. Select [Save] or [Registration], and press [OK]. - [Save] only saves the changed value, while [Registration] saves the value and also performs reregistration. _ © SAMSUNG Electronics Co., Ltd.
  • Page 113 [If 1. System DHCP or 3. Standard IP mode has been selected at Step 1] Select [Save] or [Registration], and press [OK]. - [Save] only saves the changed value, while [Registration] saves the value and also performs reregistration. SMT-W5100 User Guide _...
  • Page 114 [If 2. Static IP mode has been selected at Step 1] In Static IP mode, you can change the phone’s IP address, gateway, and netmask. Enter the phone’s IP address. Enter the phone’s gateway address. _ © SAMSUNG Electronics Co., Ltd.
  • Page 115 Enter the phone’s netmask address. Select [Save] or [Registration], and press [OK]. - [Save] only saves the changed value, while [Registration] saves the value and also performs reregistration. SMT-W5100 User Guide _...
  • Page 116 If you want to access FON AP, select [On]; if not, select [Off], and then press [OK]. [If [On] has been selected at Step 1] Enter an ID for authentication when accessing FON AP. _ © SAMSUNG Electronics Co., Ltd.
  • Page 117 Enter a password for authentication when accessing FON AP. Select [Save] or [Registration], and press [OK]. - [Save] only saves the changed value, while [Registration] saves the value and also performs reregistration. SMT-W5100 User Guide _...
  • Page 118 [If [Off] has been selected at Step 1] Select [Save] or [Registration], and press [OK]. - [Save] only saves the changed value, while [Registration] saves the value and also performs reregistration. _ © SAMSUNG Electronics Co., Ltd.
  • Page 119 You can save the changed value or reregister it. Enter the system DNS address. Select [Save] or [Registration], and press [OK]. - [Save] only saves the changed value, while [Registration] saves the value and also performs reregistration. SMT-W5100 User Guide _...

  • Page 120: Ssid Setting

    9. SSID Setting (Select Auto/Manual) [OK] If you select Auto at Step 1, SSIDs are automatically searched. Select an SSID from the list of searched SSIDs. - Ask the system administrator which SSID should be selected. _ © SAMSUNG Electronics Co., Ltd.
  • Page 121 - As for its availability, refer to your system administrator. Select [Save] or [Registration], and press [OK]. - [Save] only saves the changed value, while [Registration] saves the value and also performs reregistration SMT-W5100 User Guide _...

  • Page 122: Help

    - Phone Settings: Briefly describes Call Forward, Program Msg, and Intern. Lock. - Busy Call Function: Briefly describes the functions to be used during a call, such as Call back, Station Msg, Camp On, Transfer, Hold, and Mute. _ © SAMSUNG Electronics Co., Ltd.

  • Page 123: Troubleshooting

    [MENU] 9. Help [OK] [2. Troubleshooting] (Select the Troubleshooting description) [OK] - This menu describes how to troubleshoot some issues, such as No ring tone, Howling, Can’t Make a Call, Unregisterable, Call Disconnect and No Operation. SMT-W5100 User Guide _...

  • Page 124: Troubleshooting

    TROUBLESHOOTING Possible problems and troubleshooting steps for your phone are described below. Check the troubleshooting steps before contacting your Authorized Samsung Reseller. General Trouble Solution The bell does not ring or the ring - Check if the phone is set to etiquette mode.
  • Page 125 - Your phone may not be registered on the system. Use the phone after registration. and calls cannot be made. - Move to an area where service can be provided. - Check if the power of the system or AP is on. SMT-W5100 User Guide _...

  • Page 126: Annex

    SMT-W5120 Frequency 2400~2483.5 MHz Size (mm) 46 (width) × 138.4 (length) × 18 (height) Weight 106.5 g Battery Charge Time 3.5 Hour (Li-Ion) Battery Duration Call duration: 4 3.5 Hours Standby duration: 40 Hours _ © SAMSUNG Electronics Co., Ltd.

Table of Contents