HP E4915A User Manual

Crystal impedance meter. crystal impedance/lcr meter

Hide thumbs

Table Of Contents

Table of Contents

Table of Contents
Introduction
Features of the HP E4915A/E4916A. M
Front Panel, Rear Panel, and Display
Front Panel
Display
Character Display Area
Current Settings (▼)
LCD Display
Comparator Output (Comparator Pass/Fail) LED
Hp E4915A/E4916A Led
Rear Panel
Rear Panel (HP E4915A)
Rear Panel (HP E4916A)
Installation and Set up Guide
Incoming Inspection
Power Requirements
Power Cable
Ventilation Requirements
Instruction for Cleaning
Rack/Handle Installation
Option 1CN Handle Kit
Installing the Handle
Rack Mount Kits Installation
Option 1CM Rack Mount Kit
Mounting the Rack
Connecting a Probe
Quick Start Guide
Overview
Required Equipment
Connecting DUT
Step 1: Preparing for Measurement
Step 2 : Turning on the Meter
Line Input Receptacle
Steps Tb Turn on the Power
Line Input Receptacle and Fuse
Step 3 : Setting up the Meter
Step 4 : Performing OPEN/SHORT/LOAD Calibrations
OPEN/SHORT/LOAD Calibration
Step 5 : Connecting DUT and Reading Measurement Results
Measurement Result Display
If "-" Appears When DUT Is Connected
Applications
Measuring Crystal Component Characteristics Using Pi-Network Test Fixture
Required Parts and Equipment
Preparation
Connecting Fixture
Connecting Capacitive Load
Specifying Measurement Parameters
Calibration
Equivalent Circuit Analysis
Procedure
Displaying Analysis Results
Measurement with Capacitance Load (Cl_A/Cl_T Parameters)
Specifying Actual Load Capacitance
Specifying Target Capacitance
Measurement Procedure
Measuring Resonant Frequency (Fr)
Measuring Resonant Frequency with Capacitive Load Connected (Fl)
CL Compensation Function
Measuring Spurious Signals
Procedure
Specifying Spurious Signal Search Range
Specifying Number of Spurious Signals and Selecting Target Signal
Displaying Fr and Cl Simultaneously
High Q Mode
Procedure
Delta Mode
Specifying Reference Cl
Specifying Reference Frequency
Displaying a
Specifying Target Signal Level and Using ALC Function (HP E4916A Only)
Specifying Signal Level
Analog Output
Specifying Reference Frequency
Specifying Rate of Change in Output Voltage
Turning Analog Output ON/OFF
Printing
Printers
Equipment Required for Printing
Connecting Printer
Printing Procedure
Connecting Printer and Converter
Drive Level Dependency Test (HP E4916A Only)
Procedure
Specifying Frequency
Specifying Drive Level Sweep Settings
Sweep Type
Stopping Measurement in Case of Faulty Search During Sweep
Limit Tests
Primary and Secondary Parameters
Tertiary Parameter
Drive Level Dependency Test
Evaporation Monitoring Function (HP E4916A Only)
Measurement Using Filter (HP E4916A Only)
Procedure
Selecting Filter Mode
Specifying Frequency
Specifying Bandwidth
Selecting Constant or Minimum Loss
Displaying Measurement Results
Limit Tests
Primary and Secondary Parameters
Measuring LCR Using Impedance Probe (HP E4916A with Options 001 and 010 Only)
Required Equipment
Connection
Selecting LCR Mode
Selecting Measurement Circuit
Selecting Measurement Parameters
Measurement Frequency
Averaging
Voltage and Current Monitor
Calibrating Probe
Measurement
Measuring LCR Using Test Fixture Adapter (HP E4916A with Options 001 and 010 Only)
Selecting Settings and Calibration
Connecting HP 16099A Test Fixture Adapter
Compensating for Fixture Loss
Load Compensation
Displaying Measurement Parameters
DC Bias Measurement
Connection
Handler Interface (Built-In Comparator Function; HP E4916A Only)
Specifying Comparator Function Settings
Specifying Limits for Primary Parameter
Specifying Limits for Secondary Parameter
Specifying Limits for Tertiary Parameter (During DLD Measurement Only)
Specifying Comparator Output Settings
Turning Comparator Function ON/OFF
Introduction
Manual Changes
Serial Number
Replacing the Fuse

Quick Links

Download this manual

HP E4915A Crystal Impedance Meter

HP E4916A Crystal Impedance/LCR Meter

User's Guide

SERIAL NUMBERS

This manual applies directly to instruments which have the serial

number prefix JP1KD, or firmware revision 2.Ox.

For additional important information about serial numbers, read

"Serial Number" in Appendix A.

WTM

HEWLETT®

mUHM

PACKARD

HP Part No. E4915-90031

Printed in JAPAN June 1997

Fourth Edition

Table of Contents

This manual is also suitable for:

E4916a

HP E4915A User Manual

Quick Links

Related Manuals for HP E4915A

Related Products for HP E4915A

This manual is also suitable for:

Table of Contents