Advertisement
Quick Links
For amazing technical/application support or to place an order contact Ramco Innovations
Micro Laser Distance Sensor [CMOS]
HG-C Series
Thank you very much for purchasing Panasonic products.
Please read this Instruction Manual carefully and thoroughly for the correct and opti-
mum use of this product.
Kindly keep this manual in a convenient place for quick reference.
This product is for the sensing (determination and measurement) of objects. Do
not use this product to secure safety, such as accident prevention which may af-
fect human life and property.
Do not stare directly into the laser beam, or through observation optical equip-
ment, such as lenses or etc. as it is dangerous.
1
INTENDED PRODUCTS FOR CE MARKING
This product complies with the following standards / regulations.
<EU Directive>
EMC Directive
<Standards in US / Canada>
CAN/CSA-C22.2 NO. 60947-5-2-14
2
CONFIRMATION OF PACKED CONTENTS
Sensor
Laser warning label (JIS Standards, GB Standard)
Instruction Manual (Japanese, English, Korean)
General Information for Safety, Compliance, and Instructions (23 languages) 1 pc.
3
SAFE USE OF LASER PRODUCT
For the purpose of preventing any injury which may occur to the user by the use
of the laser product in advance, the following standards have been established by
the IEC Standards, JIS Standards, GB Standards and FDA Standards.
IEC : IEC 60825-1
-2014
JIS : JIS C 6802
-2014
GB : GB 7247.1
-2012
FDA : PART 1040.10
provide the safety measures for respective classes.
FDA Standards Outline
Requirements
Performance (all laser products)
Protective housing [1040.10 (f) (1)]
Safety interlocks [1040.10 (f) (2)]
Location of controls [1040.10 (f) (7)]
Viewing optics [1040.10 (f) (8)]
Scanning safeguards [1040.10 (f) (9)]
Performance (laser system)
Remote control connector [1040.10 (f) (3)]
Key control [1040.10 (f) (4)]
Emission indicator [1040.10 (f) (5)]
Beam attenuator [1040.10 (f) (6)]
Reset [1040.10 (f) (10)]
Medical [1040.11 (a)]
Measurement, leveling, alignment [1040.11 (b)]
Demonstration [1040.11 (c)]
Labeling (all laser products)
Protective housing [1040.10 (g) (6), (7)]
Aperture [1040.10 (g) (4)]
Class warning [1040.10 (g) (1), (2), (3)]
Information (all laser products)
User information [1040.10 (h) (1)]
Product literature [1040.10 (h) (2) (i)]
Service information [1040.10 (h) (2) (ii)]
R : Required
N/A : Not applicable
S : Same as for other products of that Class. Also see footnotes.
NP : Not permitted
D : Depends on level of interior radiation.
*1
: Class is based on the maximum level of laser exposure during operation.
*2
: Required wherever and whenever human access to laser radiation above Class I limits is not
needed for products to perform its functions.
*3
: Required for protective housings opened during operation or maintenance, if human access
thus gained is not always necessary when housing is opened.
*4
: The requirements for interlock differ depending on the class of inner radiation.
*5
: The contents of label differ depending on the level and wavelength of laser radiation inside
the protective housing.
*6
: Warning statement label.
*7
: CAUTION logotype.
*8
: The method to measure the level of laser radiation to human body is required.
-2
*9
: CAUTION if 2.5mWcm
or less, DANGER is greater than 2.5mWcm
*10 : Delay required between indication and emission.
*11 : Exception should be provided for demonstration of laser products or light shows using laser
of Class IIIb or IV.
*12 : DANGER logotype.
*13 : Required after August 20, 1986.
Ramco Innovations
INSTRUCTION MANUAL
ME-HGC1000 No.0059-28V
WARNING
1 pc. each language
*1
Class
I
IIa
II
IIIa
IIIb
R
*2
R
*2
R
*2
R
*2
R
*3,4
*3,4
*3,4
*3,4
*3,4
R
R
R
R
R
N/A
R
R
R
R
R
R
R
R
R
R
R
R
R
R
N/A
N/A
N/A
N/A
R
N/A
N/A
N/A
N/A
R
*10
N/A
N/A
R
R
R
N/A
N/A
R
R
R
N/A
N/A
N/A
N/A
N/A
*8
S
S
S
S
S
S
S
S
S
NP
*11
S
S
S
S
S
R
R
R
R
R
*5
*5
*5
*5
D
R
R
R
R
N/A
N/A
R
R
R
N/A
R
*6
R
*7
R
*9
R
*12
R
R
R
R
R
N/A
R
R
R
R
R
R
R
R
R
-2
(800) 280-6933 www.panasonicsensors.com nsales@ramcoi.com
WARNING label
In Japanese
In Chinese
<Label position>
An English warning label is attached to this product. When this product is used
1 pc.
in Japan or China, peel off the English warning label, and attach the Japanese or
1 set each
Chinese warning label.
cation label to the cable close to the sensing device.
4
PART DESCRIPTION
Teaching indicator (Yellow)
Output operation indicator (Orange)
Laser emission indicator (Green)
5
MOUNTING
When mounting this product, use M3 screws (prepare separately).
Use a tightening torque of 0.5N･m for mounting.
When mounting this product using the sensor mounting bracket (optional), also
use a tightening torque of 0.5N･m.
IV
*2
R
*2
*3,4
R
R
R
R
R
R
*10
R
R
*13
R
Mounting Direction
*8
*8
S
Direction to a movable body
NP
*11
S
<When there are differences in material and color>
• When performing measurements
R
of moving objects with exces-
*5
*5
R
R
sively different materials and
R
*12
colors, mount the product per the
R
measurement errors.
R
R
<Measurement of rotating objects>
• When measuring rotating objects,
mount the product as follows.
Measurement can be performed
tion, position deviation and etc.
<When there is a step>
• When there is a step in the mov-
ing object, mount the product as
follows. Measurement can be
from the edges of the steps.
Measuring of narrow locations and recesses
• When measuring in narrow loca-
tions or inside holes, mount the
product so that optical path from
the light emitting part to light-
receiving part is not interrupted.
In English
Zero set indicator (Yellow)
PRO indicator (Yellow)
TEACH key
UP key
DOWN key
Mounting hole dimensions
M3 screws (prepare separately)
-
-
-
Digital indicator (Red)
18mm
Advertisement
Related Manuals for Panasonic HG-C Series
Summary of Contents for Panasonic HG-C Series
- Page 1 In English Micro Laser Distance Sensor [CMOS] HG-C Series ME-HGC1000 No.0059-28V Thank you very much for purchasing Panasonic products. In Chinese Please read this Instruction Manual carefully and thoroughly for the correct and opti- mum use of this product. Kindly keep this manual in a convenient place for quick reference.
- Page 2 Mounting the sensor to a wall 1-point teaching (Window comparator mode) • Mount the product as follows, so This is mode is used for setting the threshold range for the distance from the ref- that the multiple light reflections erence value of the sensing object, by performing 1-point teaching. This mode is on the wall do not emit to the light- used for sensing within the threshold range.
- Page 3 ZERO SET FUNCTION Span adjustment in rising differential mode or trailing differential mode This mode is used to cancel the gradual changes in the measured value, and to only detect sudden changes. When performing rising differential mode or trailing differential mode, preset “Ris- ing differential mode”...
- Page 4 (FG) For sales network, please visit our website. terminal of the device. PRINTED IN CHINA © Panasonic Industrial Devices SUNX Co., Ltd. 2017 Ramco Innovations (800) 280-6933 www.panasonicsensors.com nsales@ramcoi.com...