Advertisement
Quick Links
Handle Extension Kit
Zero-Turn Riding Mower
Model No. 145-3615
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Description
No parts required
Handle extension
Flange-head bolt (3/8 x 1-3/4 inches)
Spacer
Locknut (3/8 inch)
Note:
Determine the left and right sides of the machine from the normal operating position.
Preparing the Machine
1.
Park the machine on a level surface.
2.
Disengage the blade-control switch.
3.
Move the motion-control levers outward to the N
4.
Engage the parking brake.
5.
Shut off the engine and remove the key.
Original Instructions (EN)
Qty.
–
Prepare the machine.
2
4
Install the handle extension.
2
4
-L
position.
EUTRAL
OCK
Form No. 3447-328 Rev A
Installation Instructions
Use
*3447-328*
Printed in the USA
All Rights Reserved
Advertisement
Related Manuals for Toro 145-3615
Summary of Contents for Toro 145-3615
- Page 1 Form No. 3447-328 Rev A Handle Extension Kit Zero-Turn Riding Mower Model No. 145-3615 Installation Instructions Installation Loose Parts Use the chart below to verify that all parts have been shipped. Description Qty. – No parts required Prepare the machine.
- Page 2 Installing the Handle Loosely secure the handle extension to the motion-control lever using 2 flange-head bolts Extension (3/8 x 1-3/4 inches), 1 spacer, and 2 locknuts (3/8 inch) as shown in Figure Remove the motion-control lever (Figure Retain the motion-control lever and 2 flange-head bolts (3/8 x 1 inch) for later installation.
- Page 3 Secure the assembled motion-control lever Move the motion-control lever forward or to the control-arm shaft using the previously rearward to the desired position in the slotted removed 2 flange-head bolts (3/8 x 1 inch) as hole (Figure shown in Figure Torque the 2 flange-head bolts (3/8 x 1 inch) to 41 N∙m (30 ft-lb).