Toro 137-2016 Installation Instructions

Deck retention kit zero-turn radius riding mower

Download this manual

Deck Retention Kit

Zero-Turn Radius Riding Mower

Model No. 137-2016

This product contains a chemical or chemicals known to the State of California

Important:

Extreme impacts during operation may result in damage to your deck or height-of-cut

system. Use caution while operating a machine with an installed Deck Retention Kit.

Installation

Preparing the Machine

No Parts Required

Procedure

1. Park the machine on a level surface.

2. Engage the parking brake.

3. Shut off the engine and remove the key.

Installing the

Deck-Retention Brackets

Parts needed for this procedure:

Deck-retention bracket

Hex-head bolt

Original Instructions (EN)

Proposition 65 Warning

to cause cancer, birth defects, or reproductive harm.

WARNING

CALIFORNIA

Procedure

1. Find the locations to install the deck-retention

brackets

Note:

Observe the frame rails for a hole.

Form No. 3415-285 Rev A

Installation Instructions

(Figure

1).

Figure 1

Printed in the USA

*3415-285* A

g211213

Page 1 Form No. 3415-285 Rev A Deck Retention Kit Zero-Turn Radius Riding Mower Model No. 137-2016 Installation Instructions WARNING CALIFORNIA Proposition 65 Warning This product contains a chemical or chemicals known to the State of California to cause cancer, birth defects, or reproductive harm.
Page 2 If there are no holes in the frame rails, perform the following: A. Measure 19 mm (3/4 inch) from the inside of the frame rail and make a mark (Figure Note: Ensure that the mark is aligned with the front of the console (Figure g211214 Figure 4...