hit counter code
3M Matic 8000a Instructions And Parts List
  1. Manuals
  2. Brands
  3. 3M Manuals
  4. Food Saver
  5. 3M-Matic 8000a
  6. Instructions and parts list

3M Matic 8000a Instructions And Parts List

Adjustable case sealer with accuglide 3 taping heads
Hide thumbs Also See for Matic 8000a:
Table of Contents

Advertisement

Quick Links

Download this manual
Instructions and Parts List
3M-Matic
Type 22100
Adjustable Case Sealer with
AccuGlide
Serial #:
Important Safety Information
BEFORE INSTALLING OR OPERATING THIS EQUIPMENT
Read, understand and follow all safety and operating instructions.
Spare Parts
It is recommended you immediately order the spare parts listed in the "Spare
Parts/Service Information" section. These parts are expected to wear through
normal use, and should be kept on hand to minimize production delays.
3M-Matic
8000a-8000a3
™
Page i
8000a-8000a3
™
3 Taping Heads
™
For reference, record machine serial number here.
NA-ENG
Dec 2023
44-0009-2134-4

Advertisement

Table of Contents
loading

Related Manuals for 3M Matic 8000a

Summary of Contents for 3M Matic 8000a

  • Page 1 Instructions and Parts List 3M-Matic 8000a-8000a3 ™ Type 22100 Adjustable Case Sealer with AccuGlide 3 Taping Heads ™ Serial #: For reference, record machine serial number here. Important Safety Information BEFORE INSTALLING OR OPERATING THIS EQUIPMENT Read, understand and follow all safety and operating instructions.
  • Page 2 NA-ENG 3M-Matic 8000a-8000a3 ™ Dec 2023 Page ii 44-0009-2134-4...

  • Page 3: Replacement Parts And Service Information

    Replacement part informationa and pricing availabel on request There is a 15% restocking fee (per order) on returned parts Note: Outside of the United States, for replacement parts and ordering information please contact your local /regional 3M or 3M representitive. NA-ENG 3M-Matic 8000a-8000a3 ™...
  • Page 4 NA-ENG 3M-Matic 8000a-8000a3 ™ Dec 2023 Page iv 44-0009-2134-4...
  • Page 5 Replacement Parts and Service Information To Our Customers: This is the 3M-Matic /AccuGlide /Scotch equipment you ordered. ™ ™ ® It has been set up and tested in the factory with Scotch tapes. If any problems occur ® when operating this equipment and you desire a service call or phone consultation, call, write, or fax the appropriate number listed below.
  • Page 6 NA-ENG 3M-Matic 8000a-8000a3 ™ Dec 2023 Page vi 44-0009-2134-4...

  • Page 7: Table Of Contents

    4.11 Box Weight and Size Capacities ......13 – 14 4.12 Machine and Packaged Machine Dimensions .....15 NA-ENG 3M-Matic 8000a-8000a3 ™...
  • Page 8 NA-ENG 3M-Matic 8000a-8000a3 ™ Dec 2023 Page viii 44-0009-2134-4...
  • Page 9 11.6 Run Boxes to Check Adjustment ......26 NA-ENG 3M-Matic 8000a-8000a3 ™...
  • Page 10 NA-ENG 3M-Matic 8000a-8000a3 ™ Dec 2023 Page x 44-0009-2134-4...
  • Page 11 Drawings and Parts Lists ......43 – End of Manual Taping Head Information Manual 2: AccuGlide ™ 3 Taping Heads — 2 Inch or 3 Inch (See Manual 2 or 3 for Table of Contents) NA-ENG 3M-Matic 8000a-8000a3 ™ Dec 2023 Page xi 44-0009-2134-4...
  • Page 12 AccuGlide ..Trademark of 3M St. Paul, MN 55144-1000 Scotch ..Trademark of 3M St. Paul, MN 55144-1000 Drw... . Drawing Ex.

  • Page 13: Introduction

    1. Introduction Manufacturing Specifi cations / Description / Intended Use The 3M-Matic 8000a-8000a3 Adjustable Case Sealer with AccuGlide ™ ™ Taping Heads is designed to apply a “C” clip of Scotch pressure-sensitive fi lm ® box sealing tape to the top and bottom center seam of regular slotted containers.

  • Page 14: How To Read And Use The Manual

    3M Industrial Specialties Division 3M Center, Bldg. 223-4NE-13 St. Paul, MN 55144-1000 (USA) E dition December 2023 © 3M 2023. All rights reserved. The manufacturer reserves the right to change the product at any time without notice. Publication © 3M 2023 44-0009-2134-4.

  • Page 15: General Information

    2. General Information 2.1 Data Identifying Manufacturer and Machine For Commercial Use Only Data for Technical Assistance and Service Agent/Distributor or Local After Sale Service: NA-ENG 3M-Matic 8000a-8000a3 ™ Dec 2023 Page 3 44-0009-2134-4...

  • Page 16: Warranty / Contents

    3M. A part will be presumed to have become defective after its warranty period unless the part is received or 3M is notifi ed of the problem no later than fi ve (5) calendar days after the warranty period. If 3M is unable to repair or replace the part within a reasonable time, then 3M at its option, will replace the equipment or refund the purchase price.

  • Page 17: Safety

    Indicates a potentially hazardous situation, which, if not Warning avoided, could result in death or serious injury and/or property damage. NA-ENG 3M-Matic 8000a-8000a3 ™ Dec 2023 Page 5 44-0009-2134-4...

  • Page 18: Table Of Warnings

    IMPORTANT! Cavity in the conveyor bed. jammed boxes from the machine while Never put your hands inside any part of the machine is running. the machine while it is working. Serious injury may occur (Figure 3-4). NA-ENG 3M-Matic 8000a-8000a3 ™ Dec 2023 Page 6 44-0009-2134-4...
  • Page 19 - Keep hands, hair, loose clothing, and jewelry away from box compression rollers. - Always feed boxes into the machine Figure 3-8 by pushing only from the end of box. NA-ENG 3M-Matic 8000a-8000a3 ™ Dec 2023 Page 7 44-0009-2134-4...

  • Page 20: Operator's Qualifi Cations Defi Nition

    - Allow only properly trained and qualifi ed - The operator must pay attention personnel to operate and service this to the blades during the tape equipment. replacement. NA-ENG 3M-Matic 8000a-8000a3 ™ Dec 2023 Page 8 44-0009-2134-4...

  • Page 21: Operator's Required Skill Levels

    Running with safety Extraordinary mechanical maintenance protections disabled Extraordinary electrical maintenance Stopped by pressing Adjusting box size the EMERGENCY STOP Tape replacement button Blade replacement Electric power Drive belt replacement disconnected Ordinary maintenance NA-ENG 3M-Matic 8000a-8000a3 ™ Dec 2023 Page 9 44-0009-2134-4...

  • Page 22: Component Locations

    Machine Bed Width Adjustment Crank Infeed Conveyor (optional - not shown) Electrical On/Off Switch (Alternate) Lower Tape Roll Mount (not shown) Casters (optional) Figure 3-9 8000a-8000a3 Case Sealer Components (Left Front View) NA-ENG 3M-Matic 8000a-8000a3 ™ Dec 2023 Page 10 44-0009-2134-4...

  • Page 23: Table Of Warnings And Replacement Labels

    STOP 78-8137-7402-9 78-8070-1366-5 78-8137-7404-5 78-8070-1318-6 78-8070-1329-3 78-8137-1331-6 78-8113-6717-2 78-8137-7406-0 78-8060-8481-6 Leg Height Adjustment Label (not shown) 78-8137-7404-5 78-8137-0886-0 3M Logo (not shown) 78-8113-6717-2 Figure 3-10 Replacement Labels / 3M Part Numbers NA-ENG 3M-Matic 8000a-8000a3 ™ Dec 2023 Page 11 44-0009-2134-4...

  • Page 24: Power Requirements

    The machine is equipped with two 1/6 HP gearmotors and comes with a 2.4m [8 foot] standard neoprene covered power cord and a grounded plug. Contact your 3M Representative for power requirements not listed above. 4.2 Operating Rate: Belt speed is 0.5m/s [100 F.P.M.] Actual production rate is dependent on operator’s dexterity.

  • Page 25: Set-Up Recommendations

    “Special Set-Up Procedure” section of this manual. Refer to illustration/chart for box height range possibilities by adjusting machine upper frame and/or outer column positioning. NA-ENG 3M-Matic 8000a-8000a3 ™ Dec 2023 Page 13...
  • Page 26 Special modifi cations may be available for carton sizes not listed on previous page. Contact your 3M Representative for information. Note: The case sealer can accommodate most boxes within the size range listed above. However, if the box length (in direction of seal) to box height ratio is .6 or less, several boxes should be test run to assure proper machine performance.

  • Page 27: Machine And Packaged Machine Dimensions

    Height (H) - 49 1/2" [1257] Length (L) - 51" [1295] Width (W) - 42" [1067] Weight: Crated Weight - 190 kg [425 pounds] (approximate) Uncrated Weight - 170 kg [375 pounds] (approximate) NA-ENG 3M-Matic 8000a-8000a3 ™ Dec 2023 Page 15 44-0009-2134-4...

  • Page 28: Shipment, Handling, And Storage 5.1 Packed Machine Shipment And Handling

    - Do not stack anything over the machine. - It is possible to stack a maximum Figure 5-4 of 2 machines (if they are in their original packing). NA-ENG 3M-Matic 8000a-8000a3 ™ Dec 2023 Page 16 44-0009-2134-4...

  • Page 29: Unpacking

    - Special bag of laminated polyester/ aluminium/Polyethylene (sea freight package only) - Polyethylene protective material For the disposal of the above materials, please follow the environmental directives or the law in your country. . Figure 6-5 NA-ENG 3M-Matic 8000a-8000a3 ™ Dec 2023 Page 17 44-0009-2134-4...

  • Page 30: Installation

    5 - For Outer Column Positioning - The columns are shipped in a lower position. To Adjust Columns - See Special Figure 7-3 Set-up Procedure (Section 11) . NA-ENG 3M-Matic 8000a-8000a3 ™ Dec 2023 Page 18 44-0009-2134-4...

  • Page 31: Plastic Ties Removal

    - (Figure 7-7A). Figure 7-5 2. Tape Drum Bracket - Install upper tape drum bracket on top cross bar as shown (Figure 7-7B). Figure 7-6 Figure 7-7 NA-ENG 3M-Matic 8000a-8000a3 ™ Dec 2023 Page 19 44-0009-2134-4...

  • Page 32: Taping Heads Completion

    (as shown in Figure 7-9). complies with the safety regulations of your country. NA-ENG 3M-Matic 8000a-8000a3 ™ Dec 2023 Page 20 44-0009-2134-4...

  • Page 33: Theory Of Operation

    8.3.2 Emergency Stop The LATCHING EMERGENCY STOP BUTTON is located on the top center of the machine (Figure 8-3). Belt Direction Figure 8-3 NA-ENG 3M-Matic 8000a-8000a3 ™ Dec 2023 Page 21 44-0009-2134-4...

  • Page 34: Controls

    9. Controls 9.1 Box Width Adjusting Knobs Figure 9-1 9.2 Box Height Adjusting Crank Figure 9-2 9.3 On/Off Switch Figure 9-3 On/Off Switch E-Stop Switch 9.4 Latching Emergency Stop Button Figure 9-4 NA-ENG 3M-Matic 8000a-8000a3 ™ Dec 2023 Page 22 44-0009-2134-4...

  • Page 35: Safety Devices

    − Allow only properly trained and qualifi ed • Have wire size 1.5mm dia. [AWG 16] personnel to operate and service this • Have a max. length 30.5m [100 ft] equipment. • Be properly grounded. NA-ENG 3M-Matic 8000a-8000a3 ™ Dec 2023 Page 23 44-0009-2134-4...

  • Page 36: Set-Up And Adjustments

    70mm [2.75 inches] long tape legs. To change tape leg length to 50mm [2.0 inches], refer to Instructions below and also to Manual 2, “Removing Taping Heads Procedure - Changing the Tape Leg Length”. Figure 11-3 NA-ENG 3M-Matic 8000a-8000a3 ™ Dec 2023 Page 24 44-0009-2134-4...
  • Page 37 5. Tighten the eight (8) screws and washers in each column. Also tighten two Set Screws (if applicable)(continued on next page) Note: Loosen but do not Remove Column Screws 305mm Min. Figure 11-7 NA-ENG 3M-Matic 8000a-8000a3 ™ Dec 2023 Page 25 44-0009-2134-4...

  • Page 38: Column Repositioning

    Important – If drive belts are allowed to slip on box, excessive belt wear will occur. NA-ENG 3M-Matic 8000a-8000a3 ™ Dec 2023 Page 26 44-0009-2134-4...

  • Page 39: Operation

    OFF (O) 1. Taping units blade guard switch on the main and disconnect 2. Latching emergency stop button electric power (Figure 12-3). 3. STOP (OFF) (O) main switch NA-ENG 3M-Matic 8000a-8000a3 ™ Dec 2023 Page 27 44-0009-2134-4...
  • Page 40 Worn or missing friction rings Replace friction rings Drive belt tension too low Adjust belt tension Electrical disconnect Check power and electrical plug Motor not turning Evaluate problem and correct (continued on next page) NA-ENG 3M-Matic 8000a-8000a3 ™ Dec 2023 Page 28 44-0009-2134-4...

  • Page 41: Trouble Shooting

    The blade is not cutting tape properly Refer to tape cutting problems The tape is threaded incorrect Rethread tape Applying mechanism spring Move spring hook to next has too little tension tighter hole NA-ENG 3M-Matic 8000a-8000a3 ™ Dec 2023 Page 29 44-0009-2134-4...
  • Page 42 NA-ENG 3M-Matic 8000a-8000a3 ™ Dec 2023 Page 30 44-0009-2134-4...

  • Page 43: Safety Measures (See Section 3)

    If this dust is allowed to build up on machine components, it can cause NA-ENG 3M-Matic 8000a-8000a3 ™ Dec 2023 Page 31 44-0009-2134-4...
  • Page 44 13. Maintenance and Repairs (continued) 13.8 Box Drive Belt Replacement WARNING Note – 3M recommends the replacement of drive belts in pairs, especially if belts • To reduce the risk associated with are unevenly worn. mechanical and electrical hazards: 1. Crank the upper taping head to its - Read, understand, and follow all safety fully raised position.
  • Page 45 If torn, broken, or worn smooth, replace machine or taping heads. the rings (Figure 13-3). Figure 13-2 Box Drive Assembly (Infeed End) NA-ENG 3M-Matic 8000a-8000a3 ™ Dec 2023 Page 33 44-0009-2134-4...
  • Page 46 To adjust belts, see “Maintenance – voltage: Drive Belts”, steps 3 and 7. - Turn electrical supply off and disconnect before performing any adjustments, maintenance or servicing the machine or taping heads. NA-ENG 3M-Matic 8000a-8000a3 ™ Dec 2023 Page 34 44-0009-2134-4...
  • Page 47 Changing Tape Leg Length from See “Adjustments – Changing Tape 70 to 48mm [2-3/4 to 2 inches] – Manual 2 Leg Length” for taping head set-up. Figure 13-5 Removing Taping Heads From Case Sealer NA-ENG 3M-Matic 8000a-8000a3 ™ Dec 2023 Page 35 44-0009-2134-4...
  • Page 48 NA-ENG 3M-Matic 8000a-8000a3 ™ Dec 2023 Page 36 44-0009-2134-4...
  • Page 49 _____________________________________________________ ________ _____________________________________________________ ________ _____________________________________________________ ________ _____________________________________________________ ________ _____________________________________________________ ________ _____________________________________________________ ________ _____________________________________________________ ________ _____________________________________________________ ________ _____________________________________________________ ________ _____________________________________________________ ________ _____________________________________________________ ________ _____________________________________________________ ________ _____________________________________________________ ________ _____________________________________________________ ________ _____________________________________________________ ________ _____________________________________________________ NA-ENG 3M-Matic 8000a-8000a3 ™ Dec 2023 Page 37 44-0009-2134-4...

  • Page 50: Additional Instructions

    Use a fi re extinguisher that is rated for electrical fi res (Figure 14-2). Figure 14-2 15. Additional Information 15.1 Statement of Conformity 15.2 Emission of Hazardous Substances Nothing to report NA-ENG 3M-Matic 8000a-8000a3 ™ Dec 2023 Page 38 44-0009-2134-4...
  • Page 51 NA-ENG Dec 2023 44-0009-2134-4...
  • Page 52 NA-ENG Dec 2023 44-0009-2134-4...
  • Page 53 NA-ENG Dec 2023 44-0009-2134-4...

  • Page 54: Technical Documentation And Information

    • Figure Number In the event that any labels are damaged • Position or destroyed, they must be replaced to • 3M Part Number (11 Digits) ensure operator safety. A label kit, • Description part number 78-8137-7540-6, is • Quantity available as a stock item.
  • Page 55 Important – Not all the parts listed are normally stocked items. Some parts or assemblies shown are available only on special order. Contact 3M/ Tape Dispenser Parts to confi rm item availability NA-ENG 3M-Matic 8000a-8000a3 ™...
  • Page 56 NA-ENG 3M-Matic 8000a-8000a3 ™ Dec 2023 Page 42 44-0009-2134-4...
  • Page 57 8000a-8000a3 Figure 23010 Figure 23011 Figure 15968 Figure 23008 Figure 15870 Figure 23004 Figure 23005 Figure 23003 Figure 15969 (Not Shown) Figure 23009 Figure 15963 Frame Assemblies NA-ENG 3M-Matic 8000a-8000a3 ™ Dec 2023 Page 43 44-0009-2134-4...
  • Page 58 8000a-8000a3 Figure 15870 NA-ENG 3M-Matic 8000a-8000a3 ™ Dec 2023 Page 44 44-0009-2134-4...
  • Page 59 Knob - VTR-B-M10 15870-14 78-0025-3210-5 Compression Roller Assembly (right) 15870-15 M10 HEX NUT NUT-M10 HEX LOCKING 15870-16 M10 WSHR WASHER-M10 PLAIN 15870-17 M14 WSHR WASHER-M14 15870-18 78-8070-1562-9 Tube - Roller Support Figure 15870 NA-ENG 3M-Matic 8000a-8000a3 ™ Dec 2023 Page 45 44-0009-2134-4...
  • Page 60 8000a-8000a3 Figure 23010 NA-ENG 3M-Matic 8000a-8000a3 ™ Dec 2023 Page 46 44-0009-2134-4...
  • Page 61 78-8098-8749-6 DRUM-TAPE 2" 78-8098-8817-1 SPRING-LEAF 2" 78-8076-4519-3 SHAFT-TAPE DRUM 2" 78-8137-8114-9 BRACKET-SUPPORT OUTBOARD TAPING 2" (LOWER) 78-8060-8484-0 SHAFT-TAPE ROLLER 2" 78-8060-8485-7 ROLLER-TAPE 2" 78-8098-8814-8 TAPE DRUM ASSY W/SHAFT 2" Figure 23010 NA-ENG 3M-Matic 8000a-8000a3 ™ Dec 2023 Page 47 44-0009-2134-4...
  • Page 62 8000a-8000a3 Figure 15968 NA-ENG 3M-Matic 8000a-8000a3 ™ Dec 2023 Page 48 44-0009-2134-4...
  • Page 63 M6 WSHR FEND WASHER-M6 FENDER 15968-10 M6X20 HHCS SCREW-M6X20 HHCS 15968-11 M6 WSHR WASHER-M6 PLAIN 15968-12 M5X16 HHCS SCREW-M5X16 HHCS 15968-13 M5 WSHR WASHER-M5 PLAIN 15968-14 78-8060-7785-1 GROMMET - EZ DG16 Figure 15968 NA-ENG 3M-Matic 8000a-8000a3 ™ Dec 2023 Page 49 44-0009-2134-4...
  • Page 64 8000a-8000a3 Figure 15963 NA-ENG 3M-Matic 8000a-8000a3 ™ Dec 2023 Page 50 44-0009-2134-4...
  • Page 65 78-0025-3224-6 PIN-8X263.5 15963-36 78-0025-3222-0 PIN-8X271 15963-37 78-8137-8045-5 BED PLATE-INFEED CONVEYOR RIGHT/LEFT ROLLER 15963-38 M5X12 PHBHCS SCREW-M5X12 PHBHCS 15963-39 78-0025-3225-3 CONVEYOR-REAR RIGHT/LEFT PLATE ASSY. 15963-40 78-0025-3224-6 PIN-8X263.5 15963-41 78-0025-3222-0 PIN-8X271 Figure 15963 NA-ENG 3M-Matic 8000a-8000a3 ™ Dec 2023 Page 51 44-0009-2134-4...
  • Page 66 WASHER-M6 PLAIN 15963-64 M8X25 HHCS SCREW-M8X25 HHCS 15963-65 M8X20 HHCS SCREW-M8X20 HHCS 15963-66 M5X16 PHBHCS SCREW-5X16 PHBHCS 15963-67 M6x25 SHCS SCREW-M6X25 SHCS 15963-68 78-0025-3158-6 GROMMET 15963-69 M6x20 SHCS SCREW-M6X20 SHCS Figure 15963 NA-ENG 3M-Matic 8000a-8000a3 ™ Dec 2023 Page 52 44-0009-2134-4...
  • Page 67 8000a-8000a3 Figure 23003 NA-ENG 3M-Matic 8000a-8000a3 ™ Dec 2023 Page 53 44-0009-2134-4...
  • Page 68 ROD SUPPORT-LEAD SCREW/LINEAR GUIDE 23003-28 78-8060-7984-0 Washer - Belleville 23003-29 78-8137-8074-5 LEAD SCREW-LEFT 23003-30 78-8137-0922-3 Pin - Spring 4 x 20 23003-31 78-8129-6113-0 BUSHING-130CF-3M/S8 CENTERING SCREW 23003-32 78-8129-6118-9 HANDLE-ADJUSTING 23003-33 78-8060-8073-1 WASHER-SPECIAL 5.5X15 W/COUNTERSINK 23003-34 78-8137-8078-6 BASE-LOCKING SPINDLE BSA51-12 ELESA 23003-35 78-8137-8077-8...
  • Page 69 8000a-8000a3 23003-42 M6x25 SHCS SCREW-M6X25 SHCS 23003-43 M6X35 SHCS SCREW-M6X35 SHCS 23003-44 78-8137-8073-7 BLOCK-NYLON 23003-45 M6 WSHR WASHER-M6 PLAIN 23003-46 M6x6 SS SET SCREW-M6X6 23003-47 M6X40 SHCS SCREW-M6X40 SHCS Figure 23003 NA-ENG 3M-Matic 8000a-8000a3 ™ Dec 2023 Page 55 44-0009-2134-4...
  • Page 70 8000a-8000a3 Figure 23011 NA-ENG 3M-Matic 8000a-8000a3 ™ Dec 2023 Page 56 44-0009-2134-4...
  • Page 71 78-8137-5905-3 GEAR-BEVEL Z-20 D-12 23011-35 78-8129-6118-9 HANDLE-ADJUSTING 23011-36 78-8129-6143-7 BUSHING-LEAD SCREW A20 23011-37 78-8060-8497-2 BUSHING-LEAD SCREW W/SS THREADS 23011-38 78-8129-6304-5 SUPPORT-BEARING ASSY 23011-39 78-8137-7879-8 BEARING-6201 2RS 23011-40 78-8137-7909-3 SUPPORT-BEARING Figure 23011 NA-ENG 3M-Matic 8000a-8000a3 ™ Dec 2023 Page 57 44-0009-2134-4...
  • Page 72 M6 WSHR WASHER-M6 PLAIN 23011-53 M8x20 BSHCS SCREW-M8X20 BHSHCS 23011-54 M6X20 HHCS SCREW-M6X20 HHCS 23011-55 M8 WSHR WASHER-M8 PLAIN 23011-56 M8x20 SHCS SCREW-M8X20 SHCS 23011-57 M6x20 SHCS SCREW-M6X20 SHCS Figure 23011 NA-ENG 3M-Matic 8000a-8000a3 ™ Dec 2023 Page 58 44-0009-2134-4...
  • Page 73 8000a-8000a3 Figure 23004 NA-ENG 3M-Matic 8000a-8000a3 ™ Dec 2023 Page 59 44-0009-2134-4...
  • Page 74 8000a-8000a3 Figure 23004 NA-ENG 3M-Matic 8000a-8000a3 ™ Dec 2023 Page 60 44-0009-2134-4...
  • Page 75 78-8055-0668-6 WASHER-15.2X26X1 23004-35 78-8091-0382-9 WASHER-BELLEVILLE 5/16 23004-36 26-0001-5862-1 SCREW-M5X12 FHSHCS 23004-37 78-8055-0669-4 PIN-DRIVE PULLEY 23004-38 78-8057-5739-6 KEY-5X5X30 23004-39 5X5X12 KEY KEY-5X5X12 23004-40 78-8076-5443-5 PULLEY-IDLER ASSY 23004-41 78-8055-0660-3 PULLEY-IDLER W/BEARINGS Figure 23004 NA-ENG 3M-Matic 8000a-8000a3 ™ Dec 2023 Page 61 44-0009-2134-4...
  • Page 76 78-8137-7946-5 BEARING-2202 2RS 23004-51 78-0025-3398-8 Snap ring 23004-52 78-8137-8370-7 GUIDE-UPPER RIGHT W/INSERTS 23004-53 78-8137-8371-5 GUIDE-WELDED RIGHT UPPER SUPPORT 23004-54 78-0025-3106-5 NUT-M8-3M 23004-55 78-8137-8004-2 GUIDE-LOWER RIGHT W/INSERTS 23004-56 78-8137-0870-4 COVER-CHAIN 23004-57 78-8129-6469-6 NUT-CORD GRIP M20X1.5 23004-58 78-8054-8577-4 WASHER-SPECIAL 6.5X30X5 W/COUNTERSINK 23004-59...
  • Page 77 8000a-8000a3 Figure 23005 NA-ENG 3M-Matic 8000a-8000a3 ™ Dec 2023 Page 63 44-0009-2134-4...
  • Page 78 8000a-8000a3 Figure 23005 NA-ENG 3M-Matic 8000a-8000a3 ™ Dec 2023 Page 64 44-0009-2134-4...
  • Page 79 8000a-8000a3 ITM# PART NUMBER DESCRIPTION 23005-1 78-8137-8145-3 LEFT DRIVE ASSY 8000a-3M 23005-2 78-8137-7996-0 BRACKET-MOTOR MOUNT BODINE 23005-3 78-8070-1522-3 Gearmotor - 115V,60HZ,Bodine w/Cap 1/6HP 23005-4 78-8076-5446-8 WASHER-SHAFT 23005-5 78-8070-1519-9 SCREW-M8X70 SHCS 23005-6 78-8055-0661-1 SPACER-W=10 L=61 23005-7 78-8137-7748-5 CHAIN-P3/8 46 LINKS 23005-8...
  • Page 80 GUIDE-WELDED LEFT LOWER SUPPORT 23005-55 78-0025-3244-4 GUIDE-LOWER SUPPORT LEFT 23005-56 78-8137-8027-3 COVER-LEFT DRIVE BELT 23005-57 78-8137-8366-5 GUIDE-UPPER LEFT W/INSERTS 23005-58 78-0025-3246-9 SUP GUIDE LEFT ENGINE BODINE 8000a-3M 23005-59 78-0025-3106-5 NUT-M8-3M 23005-60 5X5X12 KEY KEY-5X5X12 23005-61 M6 WSHR WASHER-M6 PLAIN 23005-62 M6X12 HHCS...
  • Page 81 8000a-8000a3 Figure 23008 3M-Matic 8000a-8000a3 NA-ENG ™ Page 67 Dec 2023 44-0009-2134-4...
  • Page 82 WASHER-M8 PLAIN 23008-8 M5 WSHR WASHER-M5 PLAIN 23008-9 M5X25 HHCS SCREW-M5X25 HHCS 23008-10 M5X12 HHCS SCREW-M5X12 HHCS 23008-11 M4-WSHR FEND WASHER-M4 FENDER 23008-12 M4X10 HHCS SCREW-M4X10 HHCS 23008-13 78-8060-7758-8 GROMMET Figure 23008 3M-Matic 8000a-8000a3 NA-ENG ™ Page 68 Dec 2023 44-0009-2134-4...
  • Page 83 8000a-8000a3 Figure 23009 NA-ENG 3M-Matic 8000a-8000a3 ™ Dec 2023 Page 67 44-0009-2134-4...
  • Page 84 23009-22 78-8137-8085-1 Contact Block - M22-K01, 1NC, Eaton 23009-23 78-8137-7798-0 BRACKET-E-STOP ASSY 8000a 23009-24 M4X15 SHCS SCREW-M4X15 SHCS 23009-25 M4 WSHR WASHER-M4 PLAIN 23009-26 M4 HEX NUT NUT-M4 HEX Figure 23009 NA-ENG 3M-Matic 8000a-8000a3 ™ Dec 2023 Page 68 44-0009-2134-4...

This manual is also suitable for:

Matic 8000a322100

Table of Contents