Advertisement
Quick Links
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
instruction
manual
1.
SAFETY
1.1.
ELECTRICAL SAFETY FOR USE OF TRANSFORMER
Use only the supplied transformer or supplied 12V 1A USB cable for connecting the dryer stand assembly to the mains power supply.
9
Failure to observe this warning could result in injury and or fire. The use of any other type of charger will invalidate the warranty.
DO NOT turn product on at the mains until the fan's jack plug has been inserted into the dryer stand assembly.
8
WARNING! It is the user's responsibility to read, understand and comply with the following instructions.
‰
WARNING! You must ensure the risk of electric shock is minimised by the installation of appropriate safety devices e.g. RCD.
‰
NOTE: If the product is used in the course of business duties, it must be maintained in a safe condition and routinely PAT (Portable
9
Appliance Test) tested.
Ensure that you inspect the transformer plug, cable and connections for wear and damage to ensure items are safe before connecting
9
them to the mains power supply. If worn or damaged DO NOT use.
WARNING! There are no user serviceable components in the transformer. DO NOT dismantle.
‰
WARNING! For indoor use only. DO NOT allow the transformer to become wet. DO NOT use in wet or damp conditions.
‰
DO NOT pull the transformer from the mains socket by the lead.
8
DO NOT overload this dryer stand; it should only be used for the designed purpose.
8
DO NOT locate in a position where items could fall from the dryer stand assembly owing to accidental contact.
8
2.
INTRODUCTION
An integral, quiet running fan will quickly and conveniently dry and cool your helmet, boots or gloves whilst on the base. Inhibiting the
build-up of damp and odour. Helps prevent the build up of bacteria so your helmet, gloves and boots smell fresher. Improves the life span
of the linings and impact materials in your equipment. The unit comes is supplied with a USB adapter for connection to your vehicle or to
a portable power pack. Making it also ideal for race/track days, as well as a mains adaptor for using at home after your ride out/commute .
Made from a firm protective PU foam to best protect your equipment.
3.
SPECIFICATION
UBH
Model No:
MS0815
Input:
Mains adaptor:12V (dc) 3A. USB
adaptor: 5V (dc 2A)
Plug Type:
3-pin Transformer
4.
OPERATION
See next page for Instructions and diagrams.
© Jack Sealey Limited
HELMET/GLOVE/BOOT DRYER STAND
MS0815
MODEL NO:
Original Language Version
MS0815
Issue: 3 15/11/23
Advertisement
Related Manuals for Sealey MS0815
Summary of Contents for Sealey MS0815
- Page 1 MS0815 MODEL NO: Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
- Page 2 Important: No Liability is accepted for incorrect use of this product. Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim. Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757500 sales@sealey.co.uk...