hit counter code
Download
Share
Print this page
Hitachi CPX11WN User Manual
  1. Manuals
  2. Brands
  3. Hitachi Manuals
  4. Projector
  5. CPX11WN
  6. User manual
Hitachi CPX11WN User Manual

Hitachi CPX11WN User Manual

Hide thumbs Also See for CPX11WN:

Advertisement

Quick Links

Download this manual
Projector
CPX10WN/CPX11WN/CPWX12WN
User's Manual (detailed)
Operating Guide – Technical
Example of PC signal
Resolution (H x V) H. frequency (kHz) V. frequency (Hz)
720 x 400
640 x 480
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
832 x 624
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1280 x 768
1280 x 800
1280 x 960
1280 x 1024
1280 x 1024
*1
1280 x 1024
*2
1400 x 1050
1440 x 900
*3
1680 x 1050
*1
1600 x 1200
*1) Supported except for HDMI input. *2) Only for CPX10WN and CPX11WN.
*3) Only for CPWX12WN.
NOTE
• Be sure to check jack type, signal level, timing and resolution before
connecting this projector to a PC.
• Some PCs may have multiple display screen modes. Use of some of these modes
will not be possible with this projector.
• Depending on the input signal, full-size display may not be possible in some cases.
Refer to the number of display pixels above.
• Although the projector can display signals with resolution up to UXGA (1600x1200),
the signal will be converted to the projector's panel resolution before being displayed.
The best display performance will be achieved if the resolutions of the input signal
and projector panel are identical.
• Automatic adjustment may not function correctly with some input signals.
• The image may not be displayed correctly when the input sync signal is a composite
sync or a sync on G.
37.9
31.5
37.9
37.5
43.3
35.2
37.9
48.1
46.9
53.7
49.7
48.4
56.5
60.0
68.7
67.5
47.7
49.7
60.0
64.0
80.0
91.1
65.2
55.9
65.3
75.0
Rating
85.0
VESA
59.9
VESA
72.8
VESA
75.0
VESA
85.0
VESA
56.3
VESA
60.3
VESA
72.2
VESA
75.0
VESA
85.1
VESA
74.5
60.0
VESA
70.1
VESA
75.0
VESA
85.0
VESA
75.0
VESA
60.0
VESA
60.0
VESA
60.0
VESA
60.0
VESA
75.0
VESA
85.0
VESA
60.0
VESA
59.9
VESA
60.0
VESA
60.0
VESA
Signal mode
TEXT
VGA (60Hz)
VGA (72Hz)
VGA (75Hz)
VGA (85Hz)
SVGA (56Hz)
SVGA (60Hz)
SVGA (72Hz)
SVGA (75Hz)
SVGA (85Hz)
Mac 16" mode
XGA (60Hz)
XGA (70Hz)
XGA (75Hz)
XGA (85Hz)
1152 x 864 (75Hz)
W-XGA (60Hz)
1280 x 800 (60Hz)
1280 x 960 (60Hz)
SXGA (60Hz)
SXGA (75Hz)
SXGA (85Hz)
SXGA+ (60Hz)
WXGA+ (60Hz)
WSXGA+ (60Hz)
UXGA (60Hz)
1

Advertisement

loading

Related Manuals for Hitachi CPX11WN

Summary of Contents for Hitachi CPX11WN

  • Page 1 75.0 60.0 VESA UXGA (60Hz) *1) Supported except for HDMI input. *2) Only for CPX10WN and CPX11WN. *3) Only for CPWX12WN. NOTE • Be sure to check jack type, signal level, timing and resolution before connecting this projector to a PC.
  • Page 2 Initial set signals Initial set signals The following signals are used for the initial settings. The signal timing of some PC models may be different. In such case, adjust the items V POSITION and H POSITION in the IMAGE menu. Back porch (B) Front porch (D) Back porch (b)
  • Page 3 Connection to the ports Connection to the ports NOTICE ►Use the cables with straight plugs, not L-shaped ones, as the input ports of the projector are recessed. HDMI COMPUTER IN1 COMPUTER IN2 TYPE B TYPE A DC5V 0.5A AUDIO IN1 S-VIDEO VIDEO AUDIO IN2...
  • Page 4 Connection to the ports (continued) HDMI COMPUTER IN1 COMPUTER IN2 TYPE B TYPE A DC5V 0.5A AUDIO IN1 S-VIDEO VIDEO AUDIO IN2 AC IN AUDIO OUT MONITOR OUT CONTROL S-VIDEO Mini DIN 4pin jack • System: NTSC, PAL, SECAM, PAL-M, PAL-N, NTSC4.43, PAL (60Hz) Signal Color signal 0.286Vp-p (NTSC, burst), 75Ω...
  • Page 5 Connection to the ports (continued) HDMI COMPUTER IN1 COMPUTER IN2 TYPE B TYPE A DC5V 0.5A AUDIO IN1 S-VIDEO VIDEO AUDIO IN2 AC IN AUDIO OUT MONITOR OUT CONTROL AUDIO IN1, AUDIO IN2 Ø3.5 stereo mini jack • 200 mVrms 47kΩ terminator AUDIO OUT Ø3.5 stereo mini jack •...
  • Page 6 Connection to the ports (continued) HDMI COMPUTER IN1 COMPUTER IN2 TYPE B TYPE A DC5V 0.5A AUDIO IN1 S-VIDEO VIDEO AUDIO IN2 AC IN AUDIO OUT MONITOR OUT CONTROL CONTROL D-sub 9pin plug 9 8 7 • About the details of RS-232C communication, 5 4 3 2 1 please refer to the next chapter.
  • Page 7 Connection to the ports (continued) To input component video signal to COMPUTER IN ports D-sub plug RCA plugs HDMI RCA connectors COMPUTER IN1 COMPUTER IN2 TYPE B TYPE A DC5V 0.5A AUDIO IN1 S-VIDEO COMPONENT VIDEO OUT VIDEO AUDIO IN2 AC IN AUDIO OUT MONITOR OUT...
  • Page 8 RS-232C Communication RS-232C Communication When the projector connects to the computer by RS-232C communication, the projector can be controlled with RS-232C commands from the computer. For details of RS-232C commands, refer to RS-232C Communication / Network command table (&17). Connection Turn off the projector and the computer.
  • Page 9 RS-232C Communication (continued) Communication settings 1. Protocol 19200bps,8N1 2. Command format ("h" shows hexadecimal) Byte Number Command Header Data Header Data Setting Action Type code size flag code Packet Action <SET>Change setting to desired value [(bL)(bH)] (aL) (aH) 01h 00h (bL) (bH) (cL) (cH) by [(eL)(eH)].
  • Page 10 RS-232C Communication (continued) 3. Response code / Error code ("h" shows hexadecimal) (1) ACK reply : 06h When the projector receives the Set, Increment, Decrement or Execute command correctly, the projector changes the setting data for the specified item by [Type], and it returns the code. (2) NAK reply : 15h When the projector cannot understand the received command, the projector returns the error code.
  • Page 11 Command Control via the Network Command Control via the Network When the projector connects network, the projector can be controlled with RS- 232C commands from the computer with web browser. For details of RS-232C commands, refer to RS-232C Communication / Network command table (&17).
  • Page 12 Command Control via the Network (continued) Communication Port The following two ports are assigned for the command control. TCP #23 TCP #9715 Configure the following items form a web browser when command control is used. Port Settings Click the [Enable] check box to open [Network Control Port1 (Port: 23)] to use TCP #23.
  • Page 13 Command Control via the Network (continued) Command control settings [TCP #23] 1. Command format Same as RS-232C communication, refer to RS-232C Communicaton command format. 2. Response code / Error code ("h" shows hexadecimal) Four of the response / error code used for TCP#23 are the same as RS-232C Communication (1)~(4).
  • Page 14 Command Control via the Network (continued) 2. Response code / Error code ("h" shows hexadecimal) The connection ID is attached for the TCP#23's response / error codes are used. The connection ID is same as the sending command format. (××h : connection ID) (1) ACK reply : 06h + ××h (2) NAK reoly : 15h + ××h (3) Error reply : 1Ch + 0000h + ××h...
  • Page 15 Network Bridge Communication Network Bridge Communication This projector is equipped with NETWORK BRIDGE function. When the projector connects to the computer by wired or wireles LAN communicaton, an external device that is connected with this projector by RS- 232C communication can be controlled from the computer as a network terminal. For details, see the 6.
  • Page 16 Network Bridge Communication (continued) Communication settings For communication setting, use the OPTION - SERVICE - COMMUNICATION menu. (&OPTION menu - SERVICE - COMMUNICATION in the Operating Guide) Item Condition BAUD RATE 4800bps / 9600bps / 19200bps / 38400bps Data length 8 bit (fixed) PARITY NONE/ODD/EVEN...
  • Page 17 RS-232C Communication / Network command table RS-232C Communication / Network command table Command Data Names Operation Type Header Action Type Setting Code Turn off BE EF 06 00 2A D3 01 00 00 60 00 00 Turn on BE EF 06 00 BA D2 01 00...
  • Page 18 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting Code DEFAULT-1 BE EF 06 00 07 E9 01 00 A1 30 20 00 CUSTOM-1 BE EF 06 00 07 FD 01 00 A1 30 10 00 DEFAULT-2 BE EF...
  • Page 19 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting Code BE EF 06 00 7C FF 02 00 97 30 00 00 User Gamma Point 8 Increment BE EF 06 00 1A FF 04 00 97 30 00 00...
  • Page 20 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting Code BE EF 06 00 B5 72 02 00 02 22 00 00 COLOR Increment BE EF 06 00 D3 72 04 00 02 22 00 00 Decrement BE EF...
  • Page 21 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting Code BE EF 06 00 B5 82 02 00 02 21 00 00 H SIZE Increment BE EF 06 00 D3 82 04 00 02 21 00 00 Decrement...
  • Page 22 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting Code AUTO BE EF 06 00 32 D7 01 00 11 20 03 00 COMPUTER IN2 SYNC ON G OFF BE EF 06 00 A2 D6 01 00 11 20...
  • Page 23 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting Code COMPUTER IN1 BE EF 06 00 7A F4 01 00 B3 20 00 00 COMPUTER IN2 BE EF 06 00 BA F6 01 00 B3 20 04 00 MONITOR OUT -...
  • Page 24 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting Code BE EF 06 00 46 D3 01 00 02 20 00 00 MUTE BE EF 06 00 D6 D2 01 00 02 20 01 00 BE EF 06 00...
  • Page 25 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting Code Disable BE EF 06 00 32 F0 01 00 A5 20 00 00 USB TYPE B SOUND Enable BE EF 06 00 A2 F1 01 00 A5 20 01 00...
  • Page 26 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting Code BE EF 06 00 40 D7 02 00 16 30 00 00 MENU POSITION V Increment BE EF 06 00 26 D7 04 00 16 30 00 00 Decrement...
  • Page 27 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting Code BE EF 06 00 B6 D6 01 00 16 20 00 00 AUTO SEARCH BE EF 06 00 26 D7 01 00 16 20 01 00 BE EF 06 00...
  • Page 28 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting Code COMPUTER IN1 BE EF 06 00 C6 32 01 00 01 36 00 00 COMPUTER IN2 BE EF 06 00 06 30 01 00 01 36 04 00 HDMI...
  • Page 29 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting Code COMPUTER IN1 BE EF 06 00 FA 38 01 00 20 36 00 00 COMPUTER IN2 BE EF 06 00 3A 3A 01 00 20 36 04 00 HDMI...
  • Page 30 PJLink command PJLink command Commands Control Description Parameter or Response 0 = Standby POWR Power Contorol 1 = Power On 0 = Standby POWR ? Power Status inquiry 1 = Power On 2 = Cool Down 11 = COMPUTER IN 1 12 = COMPUTER IN 2 22 = S-VIDEO 23 = VIDEO...
  • Page 31 INF1 ? HITACHI inquiry Your model name, "CPX10WN", INF2 ? Model Name inquiry "CPX11WN" or "CPWX12WN". Responds with the factory information and so INFO ? Other Information inquiry CLSS ? Class Information inquiry 1 NOTE • The password used in PJLink is the same as the password set in the Web Brouwser Comtrol.

This manual is also suitable for:

Cpx10wnCpwx12wn