Advertisement
Quick Links
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
Wear eye
instructions
protection
1.
SAFETY
WARNING! Ensure Health and Safety, local authority and general workshop
‰
practice regulations are adhered to when using tools.
WARNING! Always use caution when working around fuel systems.
‰
The fuel in the fuel rail may be pressurised even if the engine is not running. These instructions are provided as a guide only. Always
refer to the vehicle manufacturer's service instructions, or a proprietary manual, to establish the current procedure and data, also any
warnings or cautions particular to the vehicle.
DO NOT use the set if any parts are missing or damaged.
8
DO NOT use this tool for any purpose other than that for which it is designed.
8
Switch off vehicle's ignition and disconnect the battery before commencing work under the bonnet.
9
You must follow the vehicle's service manual cautions when working around the air bag system. If the cautions are not followed the air
9
bag may deploy unexpectedly even after the ignition is turned 'OFF', resulting in personal injury.
DO NOT lay tools on the vehicle's battery. This may short the terminals together, causing harm to yourself, the tools, or the battery.
8
Operate in a well ventilated area. DO NOT inhale fuel vapours.
9
Wear approved eye protection.
9
Wear suitable clothing to avoid snagging. DO NOT wear jewellery and tie back long hair.
9
Keep children and other unauthorised persons away from the working area.
9
Keep yourself, tools, and test equipment away from hot engine parts.
9
Always keep a fire extinguisher that is suitable for fuel/electrical/chemical fires close by.
9
DO NOT smoke or have open flames near vehicle.
8
Always relieve fuel pressure before disconnecting fuel lines from injectors.
9
Use a cloth to cover fuel line fittings when connecting or disconnecting fuel lines. Avoid contact with fuel.
9
Clean up all fuel spills immediately and dispose of all used cloths properly.
9
Maintain the tool components in good and clean condition for best and safest performance.
9
When work on the vehicle is finished, ensure all connections on vehicle are restored, and that there are no tools left in the engine bay.
9
Replace tools in the carrying case and store in a safe, dry, childproof location.
9
2. INTRODUCTION
Suitable for Ford EcoBlue 2.0L engines. Easily extracts Ford EcoBlue diesel injectors in one piece so they can be refitted. Set includes
force screw, (with bearing), force screw spacer, injector clamp, injector clamp bolt, flare nut, support bridge and bridge legs with nuts
(x2). Equivalent to OEM 303-1706.
3. CONTENTS
3
4
5
7
11
© Jack Sealey Limited
DIESEL INJECTOR PULLER - FORD ECOBLUE
2.0L
MODEL NO:
Wear protective
Wear safety
gloves
footware
1
2
2
6
9
10
Original Language Version
VS2078.V2
DO NOT USE AIR TOOLS
TO OPERATE FORCE SCREW
Wear protective
clothing
ALWAYS KEEP FORCE SCREW
WELL LUBRICATED. MOLYBDENUM
COPPER BASED RECOMMENDED
1
VS2078-01
2
VS2078-02
6
3
VS2078-03
4
VS2078-04
5
VS2078-05
6
VS2078-06
7
VS2078-V2-07
8
VS2078-08
8
9
SN10.S
10
FWM10.S
11
VS2078-V2-11
Bridge
Bridge Leg
Injector Clamp (Upper)
Injector Clamp (Lower)
Force Screw Spacer
Force Screw c/w Bearing Nut
Injector Clamp Bolt M12 (1.75 x 55)
Spacer Washer
Steel Nut M10 Zinc
Flat Washer M10 Zinc
Flare Nut
VS2078.V2 Issue 2 16/08/2024
Advertisement
Related Manuals for Sealey VS2078.V2
Summary of Contents for Sealey VS2078.V2
- Page 1 VS2078.V2 MODEL NO: Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
- Page 2 Important: No Liability is accepted for incorrect use of this product. Please note that other versions of this product are available. If you require documentation for alternative versions, please email or call our technical team on technical@sealey.co.uk or 01284 757505.