hit counter code
Download
Share
Print this page
HP 9000 rp3410 Operation And Maintenance Manual
  1. Manuals
  2. Brands
  3. HP Manuals
  4. Server
  5. 9000 rp3410
  6. Operation and maintenance manual
HP 9000 rp3410 Operation And Maintenance Manual

HP 9000 rp3410 Operation And Maintenance Manual

Hide thumbs Also See for 9000 rp3410:

Advertisement

Quick Links

Download this manual
hp 9000 rp3410 and rp3440
Operation and Maintenance Guide
Regulatory Model Number: FCLSA-0201
Version 2.0
Manufacturing Part Number: rp3410_rp3440_opmaint
January 2004
U.S.A.
© Copyright 2004 Hewlett-Packard Development Company, L.P..

Advertisement

loading

Related Manuals for HP 9000 rp3410

Summary of Contents for HP 9000 rp3410

  • Page 1 9000 rp3410 and rp3440 Operation and Maintenance Guide Regulatory Model Number: FCLSA-0201 Version 2.0 Manufacturing Part Number: rp3410_rp3440_opmaint January 2004 U.S.A. © Copyright 2004 Hewlett-Packard Development Company, L.P..
  • Page 2 Adobe and Acrobat are trademarks of Adobe Systems Incorporated. HP-UX Release 10.20 and later and HP-UX Release 11.00 and later (in both 32 and 64-bit configurations) on all HP 9000 computers are Open Group UNIX 95 branded products. Intel is a trademark or registered trademark of Intel Corporation or its subsidiaries in the United States and other countries.
  • Page 3 HP Encourages Your Comments ........
  • Page 4 Contents Management Processor Commands........... . 57 Reset BMC Passwords .
  • Page 5 Contents 6. Troubleshooting Troubleshooting Methodology ............75 Operating System Will Boot .
  • Page 6 Contents Dimensions and Weights ............. 168 Component Dimensions .
  • Page 7 Figure 3-7. 10/100/1000 LAN Connector..........29 Figure 4-1. Front View of the hp 9000 rp3410/hp 9000 rp3440 Server..... . . 31 Figure 4-2.
  • Page 8 Figures Figure 7-8. Front Bezel ............100 Figure 7-9.
  • Page 9 Figures Figure 7-51. Connecting the Power Pod Cable ......... 134 Figure 7-52.
  • Page 10 Figures...
  • Page 11 About This Document This document describes how to operate and maintain your hp 9000 rp3410 or hp 9000 rp3440 Server, Regulatory Model Number: FCLSA-0201. The document printing date and part number indicate the document’s current edition. The printing date will change when a new edition is printed.
  • Page 12 Command Related Documents The HP Server Documentation CD-ROM has been provided with your server. It contains a complete documentation set for the server, including localized versions of key documents. Included on the CD-ROM are the Site Preparation and Operations and Maintenance guides, which contain in-depth troubleshooting, installation, and repair information.
  • Page 13 About This Document Where to Get Help Information to Collect Before You Contact Support Before you contact HP support, you should: Step 1. Check information on troubleshooting and attempt to solve the problem. See Chapter 6, “Troubleshooting.” • Note failure symptoms and error indications (LEDs and messages) by checking the SEL and FPL logs.
  • Page 14 About This Document Where to Get Help Chapter 1...
  • Page 15 This chapter describes the controls, ports, and indicators found on the front panel and rear panel locations of the hp 9000 rp3410 or hp 9000 rp3440 Server. The hp 9000 rp3410 or hp 9000 rp3440 Server is designed to be rack mounted.
  • Page 16 LEDs. Additional Controls and Indicators The hp9000 rp3410 or hp 9000 rp3440 Server can have up to three low-voltage differential (LVD), 3.5 inch form factor hard disk drives (HDDs) installed. These hard disk drives have LEDs that provide status and activity information.
  • Page 17 Pass through mode Optional Removable Media Drive The hp 9000 rp3410 or hp 9000 rp3440 Server is delivered without a removable media drive. Either a DVD-ROM or CD-RW/DVD-ROM drive may be added. Each of these optional devices has one activity LED.
  • Page 18 The hp 9000 rp3410 or hp 9000 rp3440 Server rear panel includes communication ports, I/O ports, AC power connector, and the locator LED/button. Additional LEDs located on the rear panel of the hp 9000 rp3410 or hp 9000 rp3440 Server signal the operational status of: •...
  • Page 19 Controls, Ports and Indicators Rear Panel Table 2-4 Rear Panel Connectors and Switches (Continued) Connector/Switch Function Locator Button and The locator button and LED are used to help locate a server within a rack of servers. When the button is engaged, the blue LED illuminates and an additional blue LED on the front panel of the server illuminates.
  • Page 20 Controls, Ports and Indicators Rear Panel 10/100 base-T ethernet LAN Connector The rear panel 10/100 base-T ethernet LAN connector has the following status and activity LEDs. Figure 2-7 10/100 base-T ethernet LAN Connector LEDs Activity (Green) Speed (Yellow) 1 2 3 4 5 6 7 8 Table 2-6 10/100 base-T ethernet LAN Connector LEDs Description...
  • Page 21 Controls, Ports and Indicators Rear Panel Table 2-7 Management Processor Card LAN LEDs (Continued) Description Standby Power Green - Standby power on, off - standby power off Chapter 2...
  • Page 22 Controls, Ports and Indicators Rear Panel Chapter 2...
  • Page 23 This chapter describes the external connectors provided on the hp 9000 rp3410 or hp 9000 rp3440 Server. Connector Pinouts The following ports and connectors are found on the rear panel of the hp 9000 rp3410 or hp 9000 rp3440 Server.
  • Page 24 External Connectors Universal Serial Bus (USB 2.0) Ports Universal Serial Bus (USB 2.0) Ports Figure 3-2 Dual USB Port Connector 1 2 3 4 1 2 3 4 Figure 3-3 Single USB Port 1 2 3 4 Table 3-1 USB Pinouts Pin Number Signal Description +5VDC...
  • Page 25 External Connectors Serial Port A (console) and Serial Port B Serial Port A (console) and Serial Port B Figure 3-4 Serial Port Connector 1 2 3 4 5 6 7 8 9 Table 3-2 Serial Port Pinouts Pin Number Signal Description Data Carrier Detect Receive Data Transmit Data...
  • Page 26 External Connectors SCSI Port, Ultra 3, 68-Pin SCSI Port, Ultra 3, 68-Pin A single, Ultra 3, 68 pin SCSI connector is located at the rear panel of the server. The external connector supports SCSI channel “B.” Figure 3-5 SCSI Port, Ultra 3, 68-Pin Table 3-3 SCSI Port Pinouts Pin Number...
  • Page 27 External Connectors SCSI Port, Ultra 3, 68-Pin Table 3-3 SCSI Port Pinouts (Continued) Pin Number Signal Description Pin Number Signal Description S21 (+ATN) S55 (-ATN) S23 (+BSY) S57 (-BSY) S24 (+ACK) S58 (-ACK) S25 (+RST) S59 (-RST) S26 (+MSG) S60 (-MSG) S27 (+SEL) S61 (-SEL) S28 (+C/D)
  • Page 28 External Connectors 10/100 LAN Connector 10/100 LAN Connector Figure 3-6 10/100 LAN Connector Activity (Green) Speed (Amber) 1 2 3 4 5 6 7 8 Table 3-4 10/100 LAN Connector Pinouts Pin Number Signal Description Not used Not used Not used Not used Chapter 3...
  • Page 29 External Connectors 10/100/1000 LAN Connector 10/100/1000 LAN Connector Figure 3-7 10/100/1000 LAN Connector 1 2 3 4 5 6 7 8 1000BT 100BT 10BT Activity Table 3-5 10/100/1000 LAN Connector Pinouts Pin Number Signal Description Not used Not used Not used Not used Chapter 3...
  • Page 30 External Connectors 10/100/1000 LAN Connector Chapter 3...
  • Page 31 LVD HDD 2 LVD HDD 1 Two additional hard disk drive may be added to your HP Server in slots 2 and 3. Always use low profile disk drives (1.0” height) in your hp 9000 rp3410 and the hp 9000 rp3440 Server.
  • Page 32 Installing and Configuring Installing Internal Hard Disk Drives Figure 4-2Filler Removal from Slot Step 3. Slide the hard disk drive into the slot until it is seated. Figure 4-3Disk Drive Installation in Slot 1 Step 4. Close the drive ejector handle by pushing it down until it clicks. Step 5.
  • Page 33 Your system has 12 memory sockets for installing DDR SDRAM memory modules. These memory modules can either be 256 MB, 512 MB, 1 GB or 2 GB. The system supports combinations from 512 MB (hp 9000 rp3410) or 1 GB (hp 9000 rp3440 Server) up to 24 GB (both models).
  • Page 34 Memory modules must be loaded in the correct order: • In the hp 9000 rp3410 Server, DIMMs must be installed as ordered pairs of equal size. For example, the DIMM in socket 0A must match 0B, 1A must match 1B, and so forth.
  • Page 35 Module sizes can be mixed, as long as DIMMs in each pair (hp 9000 rp3410) or quad (hp 9000 rp3440 Server) match. For example: • On hp 9000 rp3410 Server, it is acceptable to load a pair of 256 MB DIMMs in sockets 0A and 0B, and a pair of 1 GB DIMMs in sockets 1A and 1B. •...
  • Page 36 Installing and Configuring Installing Additional PCI Cards Figure 4-5 Inserting DIMM into Slot Installing Additional PCI Cards Accessory cards are installed in a removable PCI cage. This section explains how to access the PCI cage, as well as how to install accessory cards. Removing the PCI cage To remove the PCI cage from the server, perform the following steps: Step 1.
  • Page 37 Installing and Configuring Installing Additional PCI Cards Figure 4-6Removing the PCI Cage Step 3. Grasp the PCI cage cover and slide it away from the bulkhead end of the cage, then lift the cover off. Figure 4-7Removing the PCI Cage Cover Step 4.
  • Page 38 Installing PCI Cards The server may contain up to 4 PCI cards. PCI cards are located in the PCI cage. The hp 9000 rp 3410 and the hp 9000 rp3440 Server have the following accessory card sockets: • Four 64-bit, 133 MHz PCI-X card sockets...
  • Page 39 Installing an Additional Power Supply The supported configuration of a hp 9000 rp3410 and the hp 9000 rp3440 Server requires a minimum of one power supply unit (PSU) to be installed. A second, optional hot-swap PSU, may be installed to provide redundant (N+1) capability.
  • Page 40 Installing and Configuring Installing an Additional Power Supply To replace the power supply, perform the following steps: Step 1. Remove the front bezel from the system and remove the power supply filler panel if you have not already done so. Figure 4-9Removing the Power Supply Filler Panel Power Supply 1 Step 2.
  • Page 41 Failure to properly complete the steps in this procedure will result in erratic system behavior CAUTION or system failure. For assistance with this procedure contact your local HP Authorized Service Provider. Observe all ESD safety precautions before attempting this procedure. Failure to follow ESD safety precautions could result in damage to the server.
  • Page 42 Installing and Configuring Installing an Additional Processor Module Figure 4-11Removing the Processor Airflow Guide Step 4. Unlock the processor module locking mechanism using the special processor tool shipped with your replacement processor module. Insert the tool into the hole that runs down through the edge of the heatsink and rotate the special processor tool 180 degrees counterclockwise.
  • Page 43 Installing and Configuring Installing an Additional Processor Module Figure 4-13Aligning the Processor Module Step 6. Use the special processor tool shipped with your replacement processor module to lock the processor module in place on the system board. To do this, insert the special processor tool into the hole that runs down the side of the heatsink and rotate it clockwise 180 degrees.
  • Page 44 Installing and Configuring Installing an Additional Processor Module Figure 4-15Slide the Sequencing Retainer Plate Step 8. Screw in the four heatsink captive screws. Figure 4-16Secure the Captive Screws Step 9. Slide the power module on the system board metal mounting bracket so that the power module connector connects with its connector on the processor module.
  • Page 45 Installing and Configuring Installing an Additional Processor Module Figure 4-17Aligning the Processor Module Power Pod Step 10. Align the two mounting screw holes on the power module with their screw holes on the system board’s metal mounting bracket. Screw in the power module mounting screws. Chapter 4...
  • Page 46 Installing and Configuring Installing an Additional Processor Module Figure 4-18Install the Processor Module Power Pod Mounting Screws Step 11. Connect the power pod cable to the power connector on the system board. Figure 4-19Connecting the Power Pod Cable Step 12. Replace the processor airflow guide. Step 13.
  • Page 47 Installing and Configuring Configuring the hp9000 rp3410 or hp9000 rp3440 Server • Use the MP commands to verify operation. • Use the BCH commands to verify operation. • Use diagnostics provided by the ODE to exercise the processor added. Configuring the hp9000 rp3410 or hp9000 rp3440 Server Configuring the hp9000 rp3410 or hp9000 rp3440 Server requires the use of the system utilities to set up user desired configuration parameters.
  • Page 48 Installing and Configuring Configuring the hp9000 rp3410 or hp9000 rp3440 Server Chapter 4...
  • Page 49 Utilities Boot Console Handler (BCH) The boot console handler (BCH) is separate code in processor dependent code (PDC). It has two purposes: • It lets the bootstrap code know which path to boot from. • It allows you to interact with PDC to view and/or modify a set of specific system parameters. Booting is accomplished in the standard PA RISC manner but may be transparent [depending on the state of the autoflags (boot, search, and start)].
  • Page 50 Utilities Boot Console Handler (BCH) COnfiguration menu Displays or sets boot values INformation menu Displays hardware information SERvice menu Displays service commands * DeBug menu Displays debug commands DIsplay Redisplay the current menu HElp [<menu>|<command>] Display help for menu or command RESET Restart the system ----...
  • Page 51 Utilities Boot Console Handler (BCH) SEArch [DIsplay|IPL] [<path>] Search for boot devices TIme [c:y:m:d:h:m:[s]] Read or set the real time clock in GMT BOot [PRI|ALT|<path>] Boot from specified path DIsplay Redisplay the current menu HElp [<command>] Display help for specified command RESET Restart the system MAin...
  • Page 52 WARNING: A fatal error has occurred-system cannot boot. Review warning messages in the information menu Info PR Example This command displays processor information on the console. Main Menu: Enter command or menu > in pr Model: hp server . (model string 9000/800/rp3410) PROCESSOR INFORMATION HVERSION SVERSION Processor Processor Speed Model Model/Op CVERSION State...
  • Page 53 Utilities Boot Console Handler (BCH) 0 900 MHz 0x0886 0x0491 3.0 Active 1 900 MHz 0x0886 0x0491 0.0 Unknown Central Bus Speed (in MHz) : 200 Software ID (dec) : 4468297807722676169 Software ID (hex) : 0x3e02952e9bf77fc9 Software Capability : 0x01f0 Service Menu The following commands are available from the service menu: Main Menu: Enter command or menu >...
  • Page 54 Utilities Boot Console Handler (BCH) The ProductNum command is for setting up the Original and/or Current Product Number. The Software Identification (SWID) doesn’t get updated automatically on change of the Original Product Number but it can be generated by executing the default command from the Configuration SubMenu. The SCSI command is for displaying/setting the SCSI controller parameters like initiator ID and speed.
  • Page 55 Utilities Management Processor Management Processor The management processor is an independent support system for the server. It provides a way for you to connect to a server and perform administration or monitoring tasks for the server hardware. The management processor controls power, reset, Transfer of Control (TOC) capabilities, provides console access, displays and records system events, and can display detailed information about the various internal subsystems.
  • Page 56 Utilities Management Processor Command Interface Management Processor Command Interface Use the management processor menus and commands as needed. The login screen, which includes the Main Menu, is shown below. Main Menu commands (CO, VFP, CM, CL, CSP, SE, SL, HE, and X) can be entered after the MP prompt.
  • Page 57 Utilities Management Processor Command Interface Management Processor Commands Table 5-2 Management Processor Commands and Descriptions Command Description Reset BMC passwords Configure asynch/serial ports Certificate generator View console log Select command mode Ctrl+B Return to MP main menu Select console mode Connect to service processor DATE Date display...
  • Page 58 TRANSMIT CONFIGURATION STRINGS: Disable this setting whenever the modem being used is not compatible with the supported modem (MT5634ZBA). IMPORTANT Do not mix HP and vt100 terminal types at the same time. Set up the remote serial port parameters as follows: •...
  • Page 59 Example 5-1 HP-UX Applications that care about the terminal type (install, SAM, vi, and so on) running on HP-UX use three methods to determine the terminal type: 1. The application takes the terminal information from the OS. This value is set in the CA command and takes effect for all MP ports.
  • Page 60 2. In the DC command choose “Reset Security Configuration”. 3. Forgotten passwords can be reset by pressing the MP reset button on the back panel of your HP Server. After the MP reboots, the local console terminal displays a message for five seconds. Responding to this message in time will allow a local user to reset the passwords.
  • Page 61 Utilities Management Processor Command Interface Front Panel Process FP: Turn off front panel fault or attention LEDs This command allows the user to control the state of front panel fault and attention LEDs, individually or together. MP Firmware Update FW: Activates MP firmware upgrade mode This command is available from either the LAN or local serial port.
  • Page 62 Utilities Management Processor Command Interface • MP IP Address • MP Host Name • Subnet Mask • Gateway Address • Web Console port number • Link State The MP Host Name set in this command is displayed at the MP command interface prompt. Typically the DNS name for the LAN IP is entered.
  • Page 63 The MP regularly checks the activity of the session, closes the connection with the system, and, if the timeout period has elapsed, returns the port to mirroring. The timeout period is set with the IT command. On HP-UX, the SE command works on the local and remote ports.
  • Page 64 Management Processor Command Interface In HP-UX, use the System Administration Manager (SAM) to add modem device files for the session UARTS. The modem type, CCITT or Bell must agree with the remote port settings for the remote session port and always be Bell mode for the local session port.
  • Page 65 Utilities Management Processor Command Interface Table 5-3 Alert Levels (Continued) Severity Definition Critical Fatal Security Options SO: Configure security options and access control (users, passwords, and so on) This command modifies the security parameters of the MP, which include login timeouts and allowed password faults.
  • Page 66 Utilities Management Processor Command Interface Virtual Front Panel VFP: Display Virtual Front Panel The VFP command presents a summary of the system by using direct console addressing. If the terminal is not recognized by the MP, VFP mode will be rejected. Each individual user will get this summary in order to avoid issues related to terminal type and screen display mode.
  • Page 67 Utilities Accessing the Baseboard Management Controller (BMC) Use Ctrl-B to exit MP command interface and return to the main MP menu: Enter a command at the help prompt: OVerview : Launch the help overview LIst : Show the list of MP commands <COMMAND>...
  • Page 68 Utilities Accessing the Baseboard Management Controller (BMC) 7. The BMC prompt displays. If you entered the admin password, you have full access. If you entered the user password, you have restricted access Admin Session Initiated cli> User Session Initiated cli> Using the BMC Command Line Interface (CLI) The baseboard management controller (BMC) supports the industry-standard Intelligent Platform Management Interface specification (IPMI 1.0 with Extensions).
  • Page 69 User Logs out user; does not close BMC session. User Resets the system. User Displays the SDR repository. This data is encoded according to the IPMI spec and can be used by HP support representatives. Chapter 5...
  • Page 70 User Displays system event log (SEL). This log is encoded and can be used by HP support representatives. IPMI Commands IPMI commands allow you to communicate with and configure various components of the system. IPMI commands are available only to users with Admin level access.
  • Page 71 Utilities Accessing the Baseboard Management Controller (BMC) Long format IPMI commands (“I”) use an ASCII transcription of the IPMI data format. The following examples illustrate how IPMI commands and responses are structured All noncommand bytes can be replaced with 0. NOTE Table 5-5 Long Format IPMI Command Data Structure Example...
  • Page 72 Sensor/Event (S/E) 06, 07 18, 1C Application 0A, 0B 28, 2C Storage 32, 33 C8, CC HP Custom (proprietary) Table 5-8 Chassis Commands Command Description Get chassis status Chassis control Get Power-on Hours (POH) counter Set Power Restore Policy Table 5-9...
  • Page 73 Utilities Accessing the Baseboard Management Controller (BMC) Table 5-10 Application Commands (Continued) Command Description Broadcast Commands Broadcast ‘Get Device ID’ System Interface Commands Set BMC global enables Get BMC global enables Clear message flags Get message flags Enable message channel receive Get message Send message Read event message buffer...
  • Page 74 Utilities Accessing the Baseboard Management Controller (BMC) Table 5-10 Application Commands (Continued) Command Description BMC Watchdog Timer Commands Reset watchdog timer Set watchdog timer Get Watchdog timer Table 5-11 Storage Commands Command Description SEL Commands Get SEL info Get SEL allocation info Reserve SEL Get SEL entry Add SEL entry...
  • Page 75 Damage to system components may result due to improper cooling airflow. To troubleshoot your system you must be familiar with the HP-UX operating system and be able to start and stop testing processes. You should also be familiar with Support Tools Manager (STM), which runs in HP-UX, and the Offline Diagnostics Environment (ODE).
  • Page 76 You can use diagnostics to thoroughly test a device and isolate failures down to the suspected Field Replaceable Unit (FRU). For complete documentation on how to access and use STM go to http://docs.hp.com. Under Topics menu go to Diagnostics and look for Support Tools Manager.
  • Page 77 Troubleshooting Operating System Will Boot Step 3. Enter cl to display the console logs. This log displays console history from oldest to newest. Step 4. Enter sl to display the system logs. The system logs consist of: • System event •...
  • Page 78 Troubleshooting Operating System Will Boot Event Log Navigation Help: View next block (forward in time, e.g. from 3 to 4) View previous block (backward in time, e.g. from 3 to 2) <CR> Continue to the next or previous block Dump the entire log for capture and analysis First entry Last entry Jump to entry number...
  • Page 79 ODE is used to evaluate specific hardware components via a command line interface. To access ODE from your Support Plus CD, perform the following steps: Step 1. Power on your HP Server and insert the Support Plus CD. Step 2. Boot the system to the PDC prompt (BOOTADMIN, BCH, etc.) prompt. PDC prompts may differ on some computer models.
  • Page 80 Troubleshooting Identifying and Diagnosing Hardware Problems Table 6-1 ODE Commands (Continued) Command Description <module_name> To run an ODE module interactively run <module_name> To run an ODE module non-interactively Identifying and Diagnosing Hardware Problems Should a hardware failure occur, the system LED, diagnostic LEDs and the system event log (SEL) will help you identify the problem: •...
  • Page 81 Troubleshooting Identifying and Diagnosing Hardware Problems Power and System LEDs The Power and System LED indicate the state of the system. When the system LED is blinking yellow or red, a problem exists. Table 6-2 System LED States System LED State AC power off if Power LED is off.
  • Page 82 LED lighting sequences when the system LED is yellow. Table 6-4 Unknown Warning System LED 1 LED 2 LED 3 LED 4 Problem Solution Flashing Unknown View the SEL for additional Yellow warning information. For further assistance, contact your HP Support Engineer. Chapter 6...
  • Page 83 Flashing Green Green Green Bad SPD View the SEL for additional Yellow information information. For further (can't detect assistance, contact your HP type). Support Engineer. Table 6-6 System Board Warnings System LED 1 LED 2 LED 3 LED 4 Problem...
  • Page 84 Troubleshooting Identifying and Diagnosing Hardware Problems Table 6-7 Fan Warnings (Continued) System LED 1 LED 2 LED 3 LED 4 Problem Solution Flashing Green Green Fan module Replace the fan that is not Yellow 2 (memory) functioning. If a processor fan is not has failed, you must replace functioning...
  • Page 85 LED 2 LED 3 LED 4 Problem Solution Flashing Unknown View the SEL for additional fault. information. For further assistance, contact your HP Support Engineer. Table 6-13 Memory Faults System LED 1 LED 2 LED 3 LED 4 Problem Solution...
  • Page 86 LED 3 LED 4 Problem Solution Flashing Green View the SEL for additional overvoltage information. For further assistance, contact your HP Support Engineer. Flashing Green View the SEL for additional undervoltage information. For further assistance, contact your HP Support Engineer.
  • Page 87 Troubleshooting Identifying and Diagnosing Hardware Problems Table 6-18 BMC Faults System LED 1 LED 2 LED 3 LED 4 Problem Solution Flashing Green Turn off and unplug the system. firmware is Wait 20 seconds, then plug in and damaged restart the system. If the error repeats, replace the system board.
  • Page 88 Troubleshooting LAN LEDs LAN LEDs The front panel LAN LED indicates the system is communicating over the Gigabit or system management LAN: • Blinking green, the system is communicating over the LAN • Solid green, LAN link is established, no current LAN activity •...
  • Page 89 Troubleshooting LAN LEDs Table 6-23 Management Processor Card LAN LEDs (Continued) LAN LED Location Color State 10BT 2nd from top Green 10BT link established Blinking green 10BT activity No link or 100BT link 100BT 2nd from bottom Green 100BT link established Blinking green 100BT activity No link or 10BT link...
  • Page 90 Troubleshooting System Board Diagnostic LEDs System Board Diagnostic LEDs There are three additional LEDs that can help when troubleshooting the system. These LEDs are located on the system board close to the back of the system and can be viewed through the small cooling holes in the system case.
  • Page 91 LED comes on, indicating that the firmware has started the boot process. Cleaning Procedures Refer to the following table for cleaning procedures for this hp 9000 rp3410 or hp 9000 rp3440 Server. Be sure to turn off power to the server when cleaning it.
  • Page 92 Troubleshooting Cleaning Procedures Chapter 6...
  • Page 93 Do not wear clothing subject to static charge build-up, such as wool or synthetic materials. WARNING Hazardous voltages are present inside the HP Server. Always remove AC power from the server and associated assemblies while working inside the unit. Serious injury may result if this warning is not observed.
  • Page 94 Component Locations 1 Power receptacles (PWR1 right, PWR2 left) 8 Hot-pluggable hard drives (up to 3) 2 HP ZX1 memory and I/O controller 9 Hard disk lock 3 Processor airflow guide 10 System fans (Fan 2 center, Fan 3 PCI cage)
  • Page 95 Connectors 2 SCSI Connectors A & B 10 Power Module Power Connector 18 Optical Drive Connector 3 CPU Power Pods 11 HP ZX1 Memory and I/O 19 MP Card connector Controller (under heatsink) 4 CPU 1 12 Memory Sockets 20 HP ZX1 I/O Adapter...
  • Page 96 Tower Configuration Either version of the HP Server, hp 9000 rp3410 or hp 9000 rp3440 Server is available in a tower configuration or may be converted from a rack to tower configuration. To access the internal components on a tower system, you must remove the plastic and metal left-side covers.
  • Page 97 Removing and Replacing Components Removing and Replacing System Covers and Bezels Figure 7-3Removing the Plastic Cover Step 3. Remove the metal cover. Figure 7-4Removing the Metal Cover a. Turn the top cover lock keyswitch to the unlocked position. b. Rotate the blue release handle to release the latch. c.
  • Page 98 Removing and Replacing Components Removing and Replacing System Covers and Bezels The HP Server depends on the access panels being closed for proper cooling of CAUTION internal components. Operating the system with the side cover removed can cause the system to quickly overheat.
  • Page 99 Removing and Replacing Components Removing and Replacing System Covers and Bezels Figure 7-6Replacing the Metal Cover Step 2. Replace the plastic cover: a. Align the cover’s mounting holes with the matching tabs on the system chassis. b. Close the cover until it snaps onto the system chassis. Figure 7-7Replacing the Plastic Cover Removing and Replacing the Rackmount Front Bezel Chapter 7...
  • Page 100 Removing and Replacing Components Removing and Replacing System Covers and Bezels You must remove the front bezel from the chassis to remove or replace the power supplies or the optical drive. Figure 7-8 Front Bezel Removing the Front Bezel To remove the front bezel parts, perform the following steps: Step 1.
  • Page 101 Accessing a Rack Mounted Server The hp 9000 rp3410 and rp3440 Servers are designed to be rack mounted. The following procedure explains how to gain access to a server that is mounted in an approved rack. For rack installation instructions, review the document titled Installation Guide, Mid-Weight Slide Kit, 5065-7291.
  • Page 102 Removing and Replacing Components Removing and Replacing System Covers and Bezels Step 2. Release the rack latches by rotating them outward. Figure 7-10Release the Rack Latches Step 3. Slide the system out of the rack until the guide-rail release clips are visible. Insert the Server into the Rack To insert the server into the rack, perform the following step: Step 1.
  • Page 103 Removing and Replacing Components Removing and Replacing System Covers and Bezels Figure 7-11Removing and Replacing the Metal Cover Step 3. Lift the cover off the system chassis. Replacing the Cover CAUTION Secure any wires or cables in your system so they will not get cut or interfere with the replacement of the cover.
  • Page 104 Removing and Replacing Components Removing and Replacing System Covers and Bezels Step 2. Grasp the blue release lever and slide the cover toward the front of the system until the lever snaps into place. Figure 7-13Closing the Metal Cover Step 3. Slide the system into the rack enclosure and reconnect the power cables. Removing and Replacing the Front Bezel You must remove the front bezel from the chassis to remove or replace the power supplies or the optical drive.
  • Page 105 Removing and Replacing Hot-swap and Hot-plug Devices The hp 9000 rp3410 and hp 9000 rp3440 Server have hard disk drives that are hot-pluggable and power supplies and fans that are hot-swappable. This section explains how to swap the following devices while the system is running: •...
  • Page 106 Removing and Replacing Components Removing and Replacing Hot-swap and Hot-plug Devices Removing a System Fan Step 1. Remove the system cover(s). Step 2. Remove the fan. a. To remove fan 1A, 1B, 2 or 3 from a rack-mounted system, or fan 3 from a tower system, grasp the appropriate fan and lift it out of the fan socket.
  • Page 107 Removing and Replacing Components Removing and Replacing Hot-swap and Hot-plug Devices Figure 7-17Fan 2 Removal Fan 2 Figure 7-18Fan 3 Removal Fan 3 Replacing a System Fan Step 1. Grasp the replacement fan module and insert it into its fan socket. Chapter 7...
  • Page 108 Removing and Replacing the Power Supply The power supplies in the HP Server are hot-swappable, that is if one power supply stops working or exhibits voltage problems, the remaining supply can support the system until the failed unit is replaced. A power supply can be removed and replaced without turning off the system on systems with two power supplies.
  • Page 109 Removing and Replacing Components Removing and Replacing Hot-swap and Hot-plug Devices Step 3. Depress the power supply release lever and slide the power supply out of the system. Figure 7-20Removing the Power Supply Replacing the Power Supply To replace the power supply, perform the following steps: Step 1.
  • Page 110 This section provides information about removing and replacing internal hard disk drives. The hp 9000 rp3410 or hp 9000 rp3440 Server system can support up to three hot-pluggable, Low-Voltage Differential (LVD) hard disk drives. These hard disk drives are 3.5-inch form factor, 10K RPM devices that connect to Ultra 320 Wide LVD (Low Voltage Differential) SCSI interfaces on the disk cage backplane.
  • Page 111 Removing and Replacing Components Removing and Replacing Hot-swap and Hot-plug Devices • See the documentation provided with the drive for additional details on inserting/removing a disk drive. • See your OS documentation for instructions on preparing the OS for inserting/removing a hard drive.
  • Page 112 Removing and Replacing Components Removing and Replacing Hot-swap and Hot-plug Devices Figure 7-23Releasing the Disk Drive Step 4. Pull outward on the release lever to remove the drive from the system. Figure 7-24Removing the Disk Drive Replacing a Hard Disk Drive To install or replace a hard disk drive, perform the following steps: Chapter 7...
  • Page 113 Removing and Replacing Components Removing and Replacing Hot-swap and Hot-plug Devices Step 1. If the server is powered on and the OS is running, prepare the OS to have the disk drive removed. Shut down the OS. See your OS documentation for instructions on preparing the OS for removing and inserting hard drives.
  • Page 114 Removing and Replacing Components Removing and Replacing Internal Components Figure 7-26Hard Disk Drive Installation Step 4. If desired, lock the hard drives in place. Replace the server covers if they were removed to unlock drives. Step 5. Verify the drive replacement by using the utilities identified in Chapter 5, “Utilities.” •...
  • Page 115 Removing and Replacing Components Removing and Replacing Internal Components Removing and Replacing Airflow Guides The system has the following airflow guides: • The processor airflow guide ensures that the proper volume of air for cooling the processor module power pods, processor module(s), and voltage regulator module(s) flows over these components. You must remove the processor airflow guide: •...
  • Page 116 Removing and Replacing Components Removing and Replacing Internal Components Figure 7-28Removing the Memory Airflow Guide Replacing the Memory Airflow Guide Step 1. Align the guides on both sides of the airflow guide with the slots on the chassis. Step 2. Insert the memory airflow guide in the slots. Step 3.
  • Page 117 Removing and Replacing Components Removing and Replacing Internal Components Figure 7-29Removing the Processor Airflow Guide Step 4. Remove the front portion of the airflow guide: a. Remove system fans 1A and 1B. b. Rotate the clip clockwise to release the latch. Chapter 7...
  • Page 118 Removing and Replacing Components Removing and Replacing Internal Components Figure 7-30Open the Release Clip Step 5. Disconnect the power cable connected to the guide from the system board. Step 6. Lift the front portion of the airflow guide out of the system. Figure 7-31Remove the Front Airflow Guide Chapter 7...
  • Page 119 Your system has 12 memory sockets for installing DDR SDRAM memory modules. These memory modules can either be 256 MB, 512 MB, 1 GB or 2 GB. The system supports combinations from 512 MB (hp 9000 rp3410) or 1 GB (hp 9000 rp3440 Server) up to 24 GB (both models).
  • Page 120 Removing and Replacing Components Removing and Replacing Internal Components Figure 7-32 DIMM Slot Identification Rear Pair 4 (3A&3B) Pair 6 (5A&5B) Pair 2 (1A&1B) Cell 1 Cell 0 Pair 1 (0A&0B) Quad 1 = Pair 1 & Pair 2 Pair 5 (4A & 4B) Quad 2 = Pair 3 &...
  • Page 121 Module sizes can be mixed, as long as DIMMs in each pair (hp 9000 rp3410) or quad (hp 9000 rp3440 Server) match. For example: • On hp 9000 rp3410 Server, it is acceptable to load a pair of 256 MB DIMMs in sockets 0A and 0B, and a pair of 1 GB DIMMs in sockets 1A and 1B. •...
  • Page 122 CAUTION Failure to properly complete the steps in this procedure will result in erratic system behavior or system failure. For assistance with this procedure contact your local HP Authorized Service Provider. Observe all ESD safety precautions before attempting this procedure. Failure to follow ESD safety precautions could result in damage to the server.
  • Page 123 Removing and Replacing Components Removing and Replacing Internal Components Step 3. Remove the processor airflow guide and cables. Step 4. Disconnect the power pod cable from the power connector on the system board. Figure 7-34Disconnect Power Pod Cable Step 5. Remove the two power pod mounting screws. Figure 7-35Remove Power Pod Mounting Screws Chapter 7...
  • Page 124 Removing and Replacing Components Removing and Replacing Internal Components Step 6. Slide the power pod toward the rear of the system board so that the power pod connector disconnects from its connector on the processor module. Figure 7-36Disconnect Power Pod from Processor Module Step 7.
  • Page 125 Removing and Replacing Components Removing and Replacing Internal Components Figure 7-37Remove Power Pod Step 8. Disconnect the processor module turbo fan power cable. Chapter 7...
  • Page 126 Removing and Replacing Components Removing and Replacing Internal Components Figure 7-38Disconnect the Turbo Fan Cable Step 9. Release the four heatsink captive screws on the processor module heat sink. Figure 7-39Release Heatsink Captive Screws Step 10. Slide the sequencing retainer plate toward the back of the system to open the hole in the edge of the heatsink for insertion of the special processor tool into the processor module locking mechanism.
  • Page 127 Removing and Replacing Components Removing and Replacing Internal Components Figure 7-40Slide Sequencing Retainer Plate Step 11. Unlock the processor module locking mechanism using the special processor tool shipped with your replacement processor module. Insert the tool into the hole that runs down through the edge of the turbo fan heatsink and rotate the special processor tool 180 degrees counterclockwise.
  • Page 128 Removing and Replacing Components Removing and Replacing Internal Components Figure 7-41Unlock Processor Module Locking Mechanism Step 12. Lift the processor module and the turbo fan assembly up and out of the chassis. Place the processor module into an anti-static container. Chapter 7...
  • Page 129 Removing and Replacing Components Removing and Replacing Internal Components Figure 7-42Remove Processor Module Chapter 7...
  • Page 130 Removing and Replacing Components Removing and Replacing Internal Components Figure 7-43 Processor Module Removal/Replacement POWER CPU 1 POWER CPU 0 CPU 0 CPU 1 Replacing a Processor Module Processor Modules are located on the system board. The system board can support either one or two Processor Modules.
  • Page 131 Removing and Replacing Components Removing and Replacing Internal Components Figure 7-44Unlocking the Processor Module Locking Mechanism Step 5. Use the four locator posts on the heatsink and the turbo fan power cable to properly align the fan and processor module on the system board. The four locator posts will fit in locator holes on the system board processor module mount.
  • Page 132 Removing and Replacing Components Removing and Replacing Internal Components Step 6. Use the special processor tool shipped with your replacement processor module to lock the processor module in place on the system board. To do this, insert the special processor tool into the hole that runs down the side of the heatsink and rotate it clockwise 180 degrees.
  • Page 133 Removing and Replacing Components Removing and Replacing Internal Components Figure 7-48Secure the Captive Screws Step 9. Slide the power module on the system board metal mounting bracket so that the power module connector connects with its connector on the processor module. Figure 7-49Aligning the Processor Module Power Pod Step 10.
  • Page 134 Removing and Replacing Components Removing and Replacing Internal Components Figure 7-50Install the Processor Module Power Pod Mounting Screws Step 11. Replace the processor airflow guide. Step 12. Connect the power pod cable to the power connector on the system board. Figure 7-51Connecting the Power Pod Cable Step 13.
  • Page 135 Removing and Replacing Components Removing and Replacing Internal Components • Use the MP commands to verify operation. • Use the BCH commands to verify operation. • Use diagnostics provided by the ODE to exercise the processor replaced. Removing and Replacing the System Battery Systems with a management processor card have two batteries.
  • Page 136 Removing and Replacing Components Removing and Replacing Internal Components Figure 7-52Removing the System Battery Replacing the System Battery Step 1. Perform system battery removal described above. Step 2. Lift up on the battery holder retaining clip with a flat-head screwdriver and slide the battery into the holder.
  • Page 137 Removing and Replacing Components Removing and Replacing Internal Components Step 6. You may need to reset the system time and date using the BCH time and date commands. Once you have set the time, turn the system off, unplug the power cord, and wait for a minute before turning it back on.
  • Page 138 Removing and Replacing PCI Cards The server may contain up to 4 PCI cards. PCI cards are located in the PCI cage. The hp 9000 rp3410 and the hp 9000 rp3440 Server have the following accessory card sockets: • Four 64-bit, 133 MHz PCI-X card sockets...
  • Page 139 Removing and Replacing Components Removing and Replacing Internal Components Removing a PCI Card To remove a PCI card from the server, perform the following steps: Record the location of all PCI cards as they are installed. Depending on the operating system, CAUTION replacing the PCI card in a different location might cause boot failure.
  • Page 140 Use the BCH commands to verify operation. Removing and Replacing the PCI Backplane The hp 9000 rp 3410 and the hp 9000 rp3440 Server system backplane is called the PCI backplane and provides four PCI card sockets. The removal process is the same for both.
  • Page 141 Removing and Replacing Components Removing and Replacing Internal Components Figure 7-57Removing the PCI Backplane Replacing the PCI Backplane Step 1. Place the backplane in the cage by aligning the cage standoffs with the holes on the backplane and slide it into place. Step 2.
  • Page 142 Failure to properly complete the steps in this procedure will result in erratic system behavior or system failure. For assistance with this procedure contact your local HP Authorized Service Provider. Figure 7-59...
  • Page 143 Removing and Replacing Components Removing and Replacing Internal Components Removing a Removable Media Drive To remove a Removable Media Drive, perform the following steps: Step 1. Turn off the system and disconnect all cables. Step 2. Remove the cover. See “Removing and Replacing the Metal Cover” Step 3.
  • Page 144 Removing and Replacing Components Removing and Replacing Internal Components Figure 7-60Removing the Management Processor Step 4. Disconnect the management processor card connector. Step 5. Remove the management processor card from the system by grasping it by its edges. Step 6. Replace the management processor card blank, if available, on the chassis. This blank is used to fill the holes left by the 10/100 management LAN, 15-pin VGA and 25-pin serial connectors.
  • Page 145 Removing and Replacing Components Removing and Replacing Internal Components Step 7. Push the management processor card blank against the inside of the chassis and screw in the blank’s mounting screw on the external connector side of the system’s chassis. Step 8. Replace the cover (s) and reconnect the power and external cables. Replacing the Management Processor Card Step 1.
  • Page 146 Removing and Replacing Components Removing and Replacing Internal Components Only lift the battery high enough to clear the holder. Excessive stress on the battery CAUTION holder retaining clip may damage the clip. Figure 7-62Removing the Management Processor Battery Replacing the Management Processor Card Battery Step 1.
  • Page 147 Removing and Replacing Components Removing and Replacing Internal Components Some system settings are saved to the LED status panel. If you are replacing both the LED CAUTION status panel and the system board, they must be replaced one at a time to avoid loss of system settings.
  • Page 148 Removing and Replacing Components Removing and Replacing Internal Components If resetting the UUID does not work successfully, contact your HP support NOTE representative. Step 5. Verify the display panel replacement by using the utilities identified in Chapter 5, “Utilities.” •...
  • Page 149 Removing and Replacing Components Removing and Replacing Internal Components Figure 7-64Remove System Board Mounting Screws Step 5. Disconnect all cables that are connected to the system board. To help with re-assembly, make note of which cables were connected to which connector. NOTE To access the three power cables near the PCI cage, you must lift up the connector bridge for the PCI cage fan.
  • Page 150 Removing and Replacing Components Removing and Replacing Internal Components Figure 7-65Remove the System Board Mounting Screw Step 7. Remove the system board: a. Grasp the memory controller chip heatsink and the processor module heatsink and slide the system board toward the front of the system. This releases the system board from its chassis standoffs.
  • Page 151 Removing and Replacing Components Removing and Replacing Internal Components Step 2. Grasp the new system board by its edges and carefully align it in the system: a. Angle the board to allow the PCI connector to slide into the PCI cage bay area. Figure 7-67Slide System Board into Chassis b.
  • Page 152 Removing and Replacing Components Removing and Replacing Internal Components Figure 7-68Align the System Board PCI Connector Step 3. Slide the system board back toward the rear of the system to secure the system board on its standoffs. Figure 7-69Slide System Board in Chassis Chapter 7...
  • Page 153 Removing and Replacing Components Removing and Replacing Internal Components Step 4. Screw in the system board mounting screw. Step 5. Connect all cables to their appropriate connectors on the system board. Step 6. Screw in the six rear backplane system board mounting screws. Figure 7-70Install the Rear Panel Mounting Screws Step 7.
  • Page 154 Removing and Replacing Components Removing and Replacing Internal Components Step 8. Replace the following system components: • Management card • Processor airflow guide • System fans • PCI card cage • Memory Step 9. Replace the system cover(s), reconnect all of the power and external cables and turn on the system. Step 10.
  • Page 155 Removing and Replacing Components Removing and Replacing Internal Components Step 4. Unscrew the PSI mounting screw and remove the PSI module from the system. Figure 7-73Remove the Mounting Screw Figure 7-74Remove the PSI Interface Module Replacing the Power Supply Interface Module Step 1.
  • Page 156 Removing and Replacing Components Removing and Replacing Internal Components Figure 7-75Replacing the Power Supply Interface Module Step 2. Screw in the PSI module mounting screw 1 and secure the power cables behind the holding clips 2. Figure 7-76Securing the Power Supply Interface Module and Cables Step 3.
  • Page 157 Removing and Replacing Components Removing and Replacing Internal Components • Use the BCH commands to verify operation. Removing and Replacing the Hard Disk Drive (SCSI) Backplane Removing the Hard Drive Disk SCSI Backplane Step 1. Turn off the system, disconnect all power and external cables, and remove the system cover(s). Step 2.
  • Page 158 Removing and Replacing Components Removing and Replacing Internal Components Figure 7-78Disconnect SCSI Cables Figure 7-79Remove Mounting Screws Step 5. Remove the hard drive backplane by sliding it in the direction of the arrow 1 and pulling it outward from its standoff posts 2. Chapter 7...
  • Page 159 Removing and Replacing Components Removing and Replacing Internal Components Figure 7-80Remove the SCSI Backplane Figure 7-81Remove the SCSI Backplane from Chassis Chapter 7...
  • Page 160 Removing and Replacing Components Removing and Replacing Internal Components Replacing the Hard Disk Drive SCSI Backplane Step 1. Insert the hard drive backplane onto its four chassis standoffs and slide it to the left as you face it. This locks the hard drive backplane in place. Step 2.
  • Page 161 Parts Information Field Replaceable Parts (FRU) List The items in this list and the corresponding item numbers are the Field replaceable Units (FRUs) for the hp9000 rp3410 and hp9000 rp3440 Servers. Figure A-1 Parts Identification Appendix A...
  • Page 162 Parts Information Field Replaceable Parts (FRU) List Figure A-2 Tower Parts Appendix A...
  • Page 163 Part numbers are found by using the part nomenclature from this list to select the correct part from the HP Partsurfer. If a system board needs to be replaced, remove processors, DIMMs, and adapter boards and transfer these to the new board. Ensure all jumper and switch settings on the old board are transferred to the new board.
  • Page 164 Parts Information Field Replaceable Parts (FRU) List Table A-1 Field Replaceable Parts (FRU) List (Continued) Part Number Part Number Item No. Description Replacement Exchange Assembly—Thin 80mm Fan tower model A7231-04015 Assembly—Dual fan A7231-04033 Assembly—Standard 80mm Fan A7231-04017 Processors Processor,800 MHz,1.5MB cache,Module A7138-67002 A7138-69002 (A7138-62002) (A7138A)
  • Page 165 Parts Information Field Replaceable Parts (FRU) List Table A-1 Field Replaceable Parts (FRU) List (Continued) Part Number Part Number Item No. Description Replacement Exchange Plastic and Metal Parts Filler,Slimline carbon A7231-40027 Filler,Slimline gray A7231-40026 HDD Filler—Carbon A6198-60003 HDD Filler—gray A6198-60002 Assembly—Fan Cage A7231-04004 Assembly—PCI Cage...
  • Page 166 Parts Information Field Replaceable Parts (FRU) List Appendix A...
  • Page 167 Specifications This appendix provides the hardware specifications of the hp 9000 rp3410 and rp 3440 Server. The following tables provide the specifications required for normal operation of the hp 9000 rp3410 or hp 9000 rp3440 Server. Hardware Specifications Table B-1...
  • Page 168 Specifications Dimensions and Weights Dimensions and Weights This section provides dimensions and weights of hp 9000 rp3410 and rp3440 Server components. Component Dimensions Table B-2 Server Component Dimensions Dimension Value Rack Dimensions (Depth x Width x Height) 67.9 cm (26.8 in.) maximum x 48.3 cm (19.0 in.) x 8.6 cm (3.4 in.)
  • Page 169 System Information Features Summary The following features comprise the hp 9000 rp 3410 and rp3440 Server. Processor • 800MHz/1.5GB cache • 900MHz/3.0GB cache • rp 3410 processors may be 1-way and 2-way • rp3440 processors are 4-way Memory • 12 memory DIMM slots •...
  • Page 170 System Information Features Summary • 1-10/100/1000Base-T ethernet LAN connectors for copper cable • 4-USB 2.0 ports • 2 general purpose or console/debug/headless 9 pins serial ports, 16550 compatible Power Supply Unit • 650W output power • The power supply is split in a front end block (the actual power supply case) that converts the line voltage into a high DC voltage and back end voltage regulation modules (on the motherboard) that step down the front end DC voltage to the required voltages •...
  • Page 171 System Information System Board System Board This section provides a block diagram of the system board and descriptions of key components (integrated circuits) on the board. Figure C-1 System Block Diagram PA-RISC PA-RISC Processor Processor ASIC Interface ASIC ASIC Interface Interface ASIC Interface...
  • Page 172 The Front Side Bus (FSB) is the IA64 processor bus based on bus protocol from Intel. Unlike previous PA-RISC microprocessors that utilized HP's proprietary processor bus, this processor is designed to utilize the FSB. This allows processor FRUs (Field Replaceable Units) to be dropped in, provided that electrical/ mechanical compatibility and support circuitry exist.
  • Page 173 System Information System Board bandwidth for this memory subsystem design is 8.5GB/s. DIMMs must be loaded in quads with qualified modules, with the exception of 256MB DIMMs which can be loaded in pairs. Memory is protected by data ECC, and the hardware implementation supports the chip-spare (similar to IBM's capital) feature The minimum amount of memory that can be installed is 512MB (2-256MB modules).
  • Page 174 System Information System Board The memory subsystem will only support DDR SDRAM (Double Data Rate Synchronous Dynamic Random Access Memory) technology utilizing industry-standard PC-1600 type DDR SDRAM DIMMs, 1.2" tall. This is expected to be the standard height available at first release and is currently being used by high-volume products.
  • Page 175 System Information System Board • Supports AGP fast writes (only to addresses less than 4 GB) • Supports 3.3V or universal-keyed PCI cards. 5V-keyed PCI cards are not supported • Uses peer-to-peer (P2P) subset that is required by the AGP specification (write-only, PCI cycles) •...
  • Page 176 System Information System Board Field Programmable Gate Array (FGPA) The field programmable gate array (FPGA) provides ACPI and LPC support for the PDH bus and provides these features: • ACPI 2.0 interface • LPC bus interface to support BMC • Decoding logic for PDH devices Baseboard Management Controller (BMC) The baseboard management controller supports the industry-standard Intelligent Platform Management...
  • Page 177 10/100/1000 Mb capable USB Connectors The USB connectors provide: • High speed 480 Mb/sec. capable • Full speed 12 Mb/sec. and low speed 1.5 Mb/sec • Support for USB keyboard and mouse: • HP-UX supports HP USB keyboard and mouse Appendix C...
  • Page 178 System Information System Board Appendix C...
  • Page 179 Index LED status panel removing and replacing acetone LEDs lighter fluid ammonia antistatic wrist strap Management processor accessing baseboard management controller commands benzene management processor card removing and replacing BMC commands management processor card battery removing and replacing memory controller chip spare cleaning MP LAN...
  • Page 180 Index processor airflow guide processor module removable media drive system battery system board system covers and bezels system fans system memory safety information SCSI SCSI Port service tools required Support Tools Manager system battery removing and replacing system board removing and replacing system covers and bezels removing and replacing System Event Log...

This manual is also suitable for:

9000 rp3440