Page 1
DAILY REFERENCE GUIDE THANK YOU FOR BUYING A WHIRLPOOL PRODUCT. You can download the Safety Instructions and the In order to receive a more complete assistance, Use and Care Guide, by visiting our website http://docs.whirlpool.eu and following please register your appliance on: www.whirlpool.com.au...
Page 2
FIRST TIME USE SALT, RINSE AID AND DETERGENT ADVICE REGARDING THE FIRST TIME USE FILLING THE RINSE AID DISPENSER After installation, remove the stoppers from the racks and the reta- Rinse aid makes dish DRYING easier. The rinse aid dispenser A should be filled when the RINSE AID REFILL ining elastic elements from the upper rack. indicator light in the control panel is lit.
Page 3
PROGRAMS TABLE Detergent Duration Water con- Energy con- container Available of wash Program sumption sumption options program (litres/cycle) (kWh/cycle) (h:min) 1. Eco 50° 3:10 1,04 2. Intensive 65° 2:30 16,5 1,65 3. Normal 55° 2:37 12,5 0,89 4. Express 30’ 50°...
Page 4
OPTIONS AND FUNCTIONS OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL). If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED flashes rapidly 3 times and beeps will sound. The option will not be enabled. DELAY HALF LOAD It is possible to delay the start time of the program by If there are not many dishes to be washed, a half load 2, 4 or 8 hours: cycle may be used in order to save water, electricity and...
Page 5
DAILY USE 1. CHECK WATER CONNECTION MODIFYING A RUNNING PROGRAM Check that the dishwasher is connected to the water supply If a wrong program was selected, it is possible to change it, and that the top is open. provided that it has only just begun: press and hold the ON/OFF button, the machine will switch off.
Page 6
LOADING THE RACKS UPPER RACK LOWER RACK For pots, lids, plates, salad bowls, cutlery etc. Large plates and lids Load delicate and light dishes: glasses, cups, saucers, low salad bowls. should ideally be placed at the sides to avoid interferences with the spray arm.
Page 7
CARE AND MAINTENANCE CLEANING THE SPRAY ARMS CLEANING THE FILTER ASSEMBLY Regularly clean the filter assembly so that the filters do not clog and On occasions, food residue may become encrusted onto the spray that the waste water flows away correctly. The filter assembly consists arms and block the holes used to spray the water.
Page 8
The phone number is listed oklet. in the warranty booklet or on the • download from website: docs.whirlpool.eu website: www.whirlpool.com.au • use QR code IEC 436 400011170417 Whirlpool® is a registered trademark of Whirlpool, USA. 07/2017 jk - Xerox Fabriano...