hit counter code
Epson EMP-760 User Manual
  1. Manuals
  2. Brands
  3. Epson Manuals
  4. Projector
  5. EMP 760
  6. User manual

Epson EMP-760 User Manual

Epson projector user's guide emp-765/emp-760
Hide thumbs Also See for EMP-760:
Table of Contents

Advertisement

Quick Links

User's Guide

Advertisement

Table of Contents
loading

Related Manuals for Epson EMP-760

Summary of Contents for Epson EMP-760

  • Page 1 User’s Guide...

  • Page 2: Projector Features

    The projector is compact B5 size (19.3 (D) × 27.6 (W) × 7 (H) cm) and lightweight (EMP-765 : approx. 1.8 kg, EMP-760 : approx. 1.7 kg). Easy to carry it with the included Soft carrying case which has a pocket to put cables and other accessories.
  • Page 3 (Wireless Mouse Function sp.22). Direct Power On & Instant Off The direct power on function means you can turn the projector on simply by plugging the power cable into the electrical outlet. s Also, with the instant- off function you can finish quickly by unplugging the power cable immediately after use.
  • Page 4 Disabled" in the EasyMP Operation Guide In addition, when the projector is set to presentation mode, only images from s"Presentation PowerPoint slideshows can be projected. EasyMP Operation Guide Because of this, the presentations can appear more professional, with none of the preparation for the presentation being visible to the viewers of the presentation.

  • Page 5: Table Of Contents

    Connecting USB Devices (Digital Camera, Hard Disk Drive or Memory Devices) (EMP-765 only)... 29 Connecting USB Devices... 29 Disconnecting a USB Device from the Projector... 30 Preventing theft (Password Protect) ... 31 When Password Protect is enabled... 31 Setting Password Protect... 32 Basic Operations Turning the Projector On...
  • Page 6 Advanced Operations Functions for Enhancing Projection...50 A/V Mute ... 50 Freeze ... 51 Wide-screen Projection of Images from Video Equipment (Changing the Aspect Ratio) ... 51 E-Zoom ... 52 Pointer function... 53 Operation Button Lock Function ... 54 Using the Configuration Menu Functions ...55 List of Functions ...

  • Page 7: Before Using The Projector

    Before Using the Projector This chapter describes the procedures for setting up the projector before use. Part Names and Functions... 7 • Front/Top ...7 • Control Panel ...8 • Rear ...9 • Base...10 • Remote Control ...11 Before Using the Remote Control ... 12 •...

  • Page 8: Part Names And Functions

    Pull out the foot lever to extend and retract the front foot. • • • • sp.41 Front adjustable foot Extend and retract to adjust the projection angle when the projector is placed on a surface such as a shelf. User’s Guide • • • • sp.8 Control panel •...

  • Page 9: Control Panel

    [EasyMP] (EMP-765 only) • • • • [Power] button sp.36, p.38 Turns the projector power on or off. • • • • sp.73 [Help] button Each time this button is pressed, it displays or hides the online help menu that can assist you if you have a problem.

  • Page 10: Rear

    Part Names and Functions Rear • • • • [USB TypeB] port sp.22, p.113 Connects the projector to a computer via the USBg cable when using the wireless mouse function. This port cannot be used for receiving images from your computer via USB.

  • Page 11: Base

    • • • • Suspension bracket fixing points (3 points) sp.15, p.108 Install the optional ceiling mount here when suspending the projector from a ceiling. • • • • sp.101 Lamp cover Open this cover to access the lamp when you need to replace it.

  • Page 12: Remote Control

    Part Names and Functions Remote Control If you position the over the button icon or button name, a description of that button will appear. • • • • sp.22 [Page down] [Page up] buttons • • • • sp.52 [E-Zoom] button ( ) ( ) •...

  • Page 13: Before Using The Remote Control

    Inserting the Batteries The batteries are not already inserted into the remote control at the time the projector is purchased. You will need to insert the batteries that are provided with the projector before the remote control can be used.

  • Page 14: Using The Remote Control And Remote Operating Range

    Using the Remote Control The remote control is used in the following way. PROCEDURE Point the remote control light-emitting area toward one of the remote control light-receiving areas on the projector and operate the remote control buttons. Remote control light-emitting area...

  • Page 15: Remote Operating Range

    Before Using the Remote Control Remote Operating Range Use the remote control within the ranges indicated below. If the distance or angle between the remote control and the remote control light-receiving area is outside the normal operating range, the remote control may not work.

  • Page 16: Installation

    CAUTION • Before setting up the projector, make sure you read the separate Safety Instructions/World-Wide Warranty Terms first. • Do not set this projector up on its side to carry out projection, otherwise malfunctions may occur. • Front projection • Rear projection using a translucent screen •...

  • Page 17: Screen Size And Projection Distance

    While referring to the following table, position the projector so that the images are projected onto the screen at the optimum size. The values should be used as a guide for setting up the projector. The actual values will vary depending on projection conditions and the zoom setting.

  • Page 18: Inserting And Removing Cards (Emp-765 Only)

    Inserting and removing PC cards will be explained using the included wireless LAN card provided as an example. The wireless LAN card provided with the projector will be used as an example in this manual to explain how to insert and remove PC cards.

  • Page 19: Removal

    Doing so may damage the memory card or data in the card. • The PC card gets hot during and immediately after projector use. Handle the card carefully when removing it from the card slot to avoid personal injury or burns.

  • Page 20: Access Lamp Status

    Access Lamp Status Card Slot Access Lamp Status When a memory card has been inserted into the projector's card slot, you can check the access status of the memory card by noting whether the access lamp is lit and what colour it is, as described below.

  • Page 21: Connecting To A Computer

    Refer to the documentation provided with the computer for further details. • If the computer and projector are too far away from each other for the accessory computer cable to reach, use the optional VGA-HD15 PC cable.

  • Page 22: Projecting Images From A Computer

    In such case, set the input source to "Computer". • If more than one input source is connected to the projector at the same time, you can use button operations to select the signals to be projected.

  • Page 23: Using The Remote Control To Operate The Mouse Pointer

    [Page up] buttons on the remote control can be used to scroll back and forth through slides when projecting a PowerPoint presentation. • If your projector is an EMP-765, the [USB TypeA] port on the back of the projector does not function as a USB hub.
  • Page 24 Connecting to a Computer Once the connection has been made, the mouse pointer can be operated as follows. Moving the mouse pointer Left click If you tilt the [ ] button on the remote Press the [Enter] button. control, the mouse pointer will move in If you press the [Enter] button twice in the direction of tilt.

  • Page 25: Connecting To A Video Source

    When connecting the projector to video equipment, take the following precautions. • Turn the power off for both the projector and the video equipment before connecting them. If the power for either device is on at the time of connection, damage may result.

  • Page 26: Projecting S-Video Images

    In such case, set the input source to "Component Video". • If more than one input source is connected to the projector at the same time, you can use button operations to select the signals to be sp.37...

  • Page 27: Projecting Rgb Video Images

    In such case, set the input source to sp.60 "Computer". • If more than one input source is connected to the projector at the same time, you can use button operations to select the signals to be sp.37 projected.

  • Page 28: Playing Sound From Video Equipment

    Playing Sound from Video Equipment The projector has a built-in speaker with a maximum output of 1 W. You can output sound from connected video equipment (such as a computer or video deck) through the projector's built-in speaker if the video equipment has an audio output port.

  • Page 29: Playing Sound From External Speakers (Emp-765 Only)

    When projecting using the CardPlayer function of EasyMP, you can output the audio signals to external speakers. Set the "EasyMP Audio Out" to "External" and connect speakers with built-in amplifiers to the projector's [Audio] port in order to enjoy a fuller quality of sound. p.63 Use a commercially-available audio cable with pin jack ⇔...

  • Page 30: Connecting Usb Devices (Digital Camera, Hard Disk Drive Or Memory Devices) (Emp-765 Only)

    Connecting USB Devices (Digital Camera, Hard Disk Drive or Memory Devices) (EMP-765 only) USB1.1-compatible digital cameras, hard disk drives and USB storage devices can be connected to the projector. Image files that are stored inside the digital camera and scenarios, images and movies that are stored inside USB storage devices can be played back by EasyMP CardPlayer.

  • Page 31: Disconnecting A Usb Device From The Projector

    When a USB-compatible hard disk drive is connected, disconnect the hard disk drive or turn the power for the hard disk drive off before turning the power for the projector off. If this is not done, it may cause problems with the projector.

  • Page 32: Preventing Theft (Password Protect)

    When Password Protect is enabled When "Power ON Protect" is enabled (ON) When the power is turned on for the first time after the projector's power cable is connected to the electrical outlet, or when Direct Power On is carried out, the following password entry screen will be displayed.

  • Page 33: Setting Password Protect

    If "Timer" is set to "0", the password entry screen will be displayed each time the power plug is disconnected and reinserted from the electrical outlet. If the projector is powered on when it is in standby mode, the password entry screen will not be displayed.
  • Page 34 Preventing theft (Password Protect) Turn "Power ON Protect" on. (1) Select "Power ON Protect", and then press the [Enter] button. (2) Select "ON", and then press the [Enter] button. (3) Press the [Esc] button. "Timer" setting allows you to specify the time interval for password prompt.

  • Page 35: Basic Operations

    Basic Operations This chapter describes basic operations such as turning the projector on and off and adjusting the projected images. Turning the Projector On... 35 • Connecting the Power Cable ...35 • Turning the Power On and Projecting Images ...36 Turning the Projector Off ...

  • Page 36: Turning The Projector On

    The power for the equipment that is connected to the projector should be turned on beforehand. PROCEDURE Check that the power is turned off for the projector and all components connected to the projector.

  • Page 37: Turning The Power On And Projecting Images

    A beep will sound to indicate that the projector is starting up. The Power indicator starts to flash green as the projector warms up, and an image begins to appear.
  • Page 38 • If a laptop computer or a computer with an LCD screen has been connected to the projector, the images may not be projected straight away. After starting projection, check that the computer has been set up to output signals externally.

  • Page 39: Turning The Projector Off

    CAUTION If the message "The projector is over heating. Make sure nothing is blocking the air vent, and clean or replace the air filter." appears on the screen, press the [Enter] button on either the projector's control panel or on the remote control to turn the power off.
  • Page 40 ON", fans will continue operating. This is normal and does not indicate a problem. (EMP-765 only) Attach the lens cover. Attach the lens cover to the lens when not using the projector, in order to prevent the lens from getting dusty or dirty. Lens cover...

  • Page 41: Adjusting The Screen Image

    The image can be enlarged in this way to 1.2 times the normal size. Turn to "W" (wide) to enlarge the images. If you would like to enlarge the image further, move the projector sp.16 further away from the screen.

  • Page 42: Adjusting The Image Angle And Automatic Keystone Correction Function

    Adjusting the Screen Image Adjusting the Image Angle and Automatic Keystone Correction Function The projector should be set up so that it is as perpendicular to the screen as possible. Seen from the side Centre of lens Seen from above If you can not set up the projetor so that it is at right angle to the screen surface, you can tilt the projector up.
  • Page 43 Extend Retract If you tilt the projector up, keystone distortion will occur in the projected screen. However, the projector is equipped with an automatic keystone correction function that can automatically correct this keystone distortion on the screen. Automatic keystone correction is carried out approximately one second after the projector is tilted vertically while the power is on.

  • Page 44: Manually Correcting Keystone Distortion

    If the top of the limit for keystone correction has been reached. Check that the image is elongated projector has not been set up at an angle which exceeds the proper limit. Projector User’s Guide...

  • Page 45: Adjusting The Image Quality

    "ON"), automatic setup is not carried out. In this case, press the [Auto] button on the remote control or the [Enter] button on the projector's control panel to make the adjustment while computer or RGB video images are being projected.

  • Page 46: Adjusting The Tracking

    Menus". Tilt the [ ] button on the remote control or press the [ ] and [ ] buttons on the projector's control panel to adjust the tracking value until the vertical stripes disappear from the images. The tracking value increases or decreases each time a button is pressed.

  • Page 47: Adjusting The Sync

    Menus". Tilt the [ ] button on the remote control or press the [ ] and [ ] buttons on the projector's control panel to adjust the synchronisation value until the flickering, fuzziness or interference disappears from the images.

  • Page 48: Selecting The Projection Quality (Colour Mode Selection)

    TV images, etc. in bright rooms. sRGBg Images conform to the sRGB colour standard. If the connected source has a sRGB mode, set both the projector and the connected signal source to sRGB. Blackboard Images with natural tints can be obtained when projecting onto a blackboard (green).

  • Page 49: Adjusting The Volume

    Adjusting the Volume The volume of the projector's built-in speaker can be adjusted as follows. PROCEDURE Press the [Volume] buttons on the remote control or the [ ] and [ ] buttons on the projector's control panel to adjust the volume.
  • Page 50 Advanced Operations This chapter describes functions for enhancing the projection of images, and how to use the configuration menus. Functions for Enhancing Projection ... 50 • A/V Mute...50 • Freeze ...51 • Wide-screen Projection of Images from Video Equipment (Changing the Aspect Ratio) ...51 •...

  • Page 51: Functions For Enhancing Projection

    Solid black Solid blue Default setting • The default user's logo is the EPSON logo. To change the user's sp.105 logo, you need to record your own logo. • When the A/V Mute function is being used, the "Brightness Control"...

  • Page 52: Freeze

    Functions for Enhancing Projection Freeze This function pauses only the projected images. The sound keeps playing without pausing. The image source will still be playing back the images even while projection is paused, and so it will not be possible to resume projection from the point where it was paused.

  • Page 53: E-Zoom

    Functions for Enhancing Projection E-Zoom This function lets you enlarge and reduce a part of projected images such as graphs and tables. PROCEDURE Press the [E-Zoom ] button. A cursor (cross) indicating the centre point for the area to be enlarged will appear on the screen.

  • Page 54: Pointer Function

    Functions for Enhancing Projection Pointer function This function lets you use the remote control to move a pointer icon around on the images being projected. This function can be used to emphasise parts of an image that you want to draw attention to.

  • Page 55: Operation Button Lock Function

    The control panel buttons will be locked in accordance with the selected setting. There are two methods to cancel the projector's control panel lock. • Using remote control, change the "Setting" - "Operation Lock" in the configuration menu to "OFF" .

  • Page 56: Using The Configuration Menu Functions

    User’s Guide Using the Configuration Menu Functions The configuration menus can be used to carry out a variety of settings and adjustments. The menus have a hierarchical structure, with a main menu that is divided into sub-menus, which are further divided into other sub-menus. sp.69 Refer to "Using the Configuration Menus"...

  • Page 57: List Of Functions

    Using the Configuration Menu Functions List of Functions "Image" Menu • None of the settings can be adjusted if no signals are being input. • The commands displayed in the "Image" menu change depending on the input sinal that is being projected. Menu commands that do not apply to the current input signal cannot be adjusted.
  • Page 58 Resets all adjustment values for the "Image" menu functions to their default settings. •Press the [Enter] button on the remote control or on the projector's control panel. •To return all settings such as the "Image" and "Signal" menu settings to their default values, select "Reset All"...
  • Page 59 Using the Configuration Menu Functions Component videog/ Composite videog/ S-Videog Sub-menu Function Color Corrects the vividness of the image colour. The settings can Mode be saved separately for each type of source (computer or video source). You can select from six different quality settings depending on the surroundings.
  • Page 60 Resets all adjustment values for the "Image" menu functions to their default settings. •Press the [Enter] button on the remote control or on the projector's control panel. •To return all settings such as the "Image" and "Signal" menu settings to their default values, select "Reset All"...

  • Page 61: Signal" Menu

    Position Moves the image display position vertically and horizontally. •Press the [Enter] button on the remote control or on the projector's control panel and then make the adjustment using the display position adjustment screen that appears. Computer Selects the input signal in accordance with the equipment Input that is connected to the [Computer/Component Video] port.
  • Page 62 Sets the video signal format. •Press the [Enter] button on the remote control or on the projector's control panel and then make the selection from the video signal format selection menu that appears. •When set to "Auto", the video signal format is set automatically.

  • Page 63: Setting" Menu

    Operation When set to "ON", the operation of all buttons on the Lock projector's control panel except for the [Power] button will be disabled. •When "Operation Lock" is set to "ON", the operation lock function can be cancelled by holding down the [Enter] button on the projector's control panel for approximately 7 seconds.
  • Page 64 EasyMP. Select the "External" to output the sound from external speakers with built-in amplifiers. Select the "Internal" to output the sound from the projector's built-in speaker. sp.28 *The audio output to an external speaker is possible only when the audio data of scenarios (.wav) or that of MPEG files are played back by Card Player.

  • Page 65: Extended" Menu

    • The "User’s Logo" setting can not be adjusted if no signals are being input. Sub-menu Function Display This lets you make settings related to the projector's display. Message: Sets whether display of the following messages is turned "ON" or "OFF". • Signal name when the video signal is switched •...
  • Page 66 • Front : Select when the projector is in front of the screen. • Front/Ceiling: Select when the projector is in front of the screen and suspended from the ceiling. • Rear : Select when the projector is behind the screen.
  • Page 67 To enable the new settings, turn the projector's power off and then turn it back on again. * When set to "Network ON", the Power indicator will flash orange and then remain orange after disconnecting the power plug and reinserting it into the electrical outlet.

  • Page 68: Info" Menu

    Using the Configuration Menu Functions "Info" Menu • The "Info" menu shows the setting details for the current image source. • The "Lamp Hours" item appears as 0H for 0–10 hours, and after that, it appears in units of 1 hour. Computer/RGB Video/Component videog Composite...

  • Page 69: Reset" Menu

    Reset All Resets all items in all menus to their default settings. •Press the [Enter] button on the remote control or on the projector's control panel. •To reset settings such as "Image" or "Signal", select "Reset" from the respective sub menus.

  • Page 70: Using The Configuration Menus

    Select a menu item. Tilt the [ ] button on the remote control up and down or press the [ ] and [ ] buttons on the projector's control panel to move to the item to be set. Confirm the selection.
  • Page 71 Tilt the [ ] button on the remote control to the left or right or press the [ ] and [ ] buttons on the projector's control panel to change the setting. Press the [Enter] button to accept the setting.
  • Page 72 Using the Configuration Menu Functions Close the menu. Press the [Menu] button. Refer to "List of Functions" for details on the functions of each menu sp.56 item. User’s Guide...

  • Page 73: Troubleshooting

    Troubleshooting This chapter describes how to identify problems and what to do if a problem is found. Using the Help... 73 Problems Solving... 75 • Reading the Indicators...75 •Power indicator lights red ... 75 •Lamp or Temp indicator flashes orange ... 76 •Power indicator lights green or orange/flashes green or orange ...

  • Page 74: Using The Help

    Using the Help If a problem occurs with the projector, the Help function uses on-screen displays to assist you in solving the problem. It uses a series of menus in a question and answer format. PROCEDURE Press the [Help] button.
  • Page 75 Using the Help Repeat the operations in steps 2 and 3 to proceed through the menu to more detailed items. The help menu is cleared when the [Help] button is pressed. If the Help function does not provide a solution to the problem, refer sp.75 to "Problem Solving"...

  • Page 76: Problems Solving

    Problems Solving If you are having a problem with the projector, first check the projector's indicators and refer to "Reading the Indicators" below. If the indicators do not show clearly what the problem might be, refer to "When the Indicators Provide No Help".

  • Page 77: Lamp Or Temp Indicator Flashes Orange

    5 minutes the projector will switch to standby mode, so check the following two points. After checking, press the [Power] button to turn the power back on. •Check that the air filter and air exhaust vent are clear, and that the projector is not positioned sp.16 against a wall.

  • Page 78: Power Indicator Lights Green Or Orange/Flashes Green Or Orange

    Cool-down in progress Orenge • If the projector is not operating properly even though the indicators are all showing normal, refer to "When the Indicators Provide No Help" on the following page. • If an indicator is showing a status which does not appear in the previous tables, contact your dealer or the nearest address provided in the "International Warranty Conditions"...

  • Page 79: When The Indicators Provide No Help

    (Computer monitors and LCD screens have different colour reproduction performance, so that the colours projected by the projector and the colours appearing on the monitor may not necessarily match, but this is not a sign of a problem.) sp.86...
  • Page 80 Monitor is running) You cannot connect from another computer when images are being projected during a network connection EMP NS Connection starts, but a projector is not found sp.90 Connection cannot be established in access point mode or sp.91...

  • Page 81: Problems Relating To Images

    Reset all of the settings. "Reset" - "Reset All" Some input images, such as screen savers, may be completely black. composite videog S-Videog source is connected to the projector, use the "Video Signal" menu command to select the signal format. sp.61 "Signal" - "Video Signal"...
  • Page 82 "Extended" - "Operation" - "Sleep Mode" Remedy composite videog S-Videog source is connected to the projector, use the "Video Signal" menu command to select the signal format. sp.61 "Signal" - "Video Signal" Refer to the documentation provided with your computer for details on changing the resolution and frequency of the image signals being output from the computer.
  • Page 83 Set the projector up in the room approximately one hour before it is to be used. If condensation forms on the lens, turn the power off and wait for the condensation to disappear.
  • Page 84 "List of Supported Monitor Displays" s Computer documentation Press the [Auto] button on the remote control or the [Enter] button on the projector's control panel to carry out automatic adjustment. If the images have not been adjusted correctly after using automatic adjustment, you can make the adjustments using the "Sync."...
  • Page 85 Press the [Esc] button on the remote control to cancel the E-Zoom function. If analogue RGB images from a computer or RGB video images are being projected, press the [Auto] button on the remote control or the [Enter] button on the projector's control panel to carry out automatic adjustment.
  • Page 86 "Signal" - "Computer Input" sp.60, p.61 If a component videog S-Videog source is connected to the projector, use the "Video Signal" menu command to select the video signal format. sp.61 "Signal" - "Video Signal" Use the "Brightness" menu command to adjust the brightness.

  • Page 87: Problems When Projection Starts

    There is probably a poor contact in the power cable, or the power cable may be defective. Reinsert the power cable. If this does not solve the problem, stop using the projector, disconnect the power cable from the wall outlet and contact the nearest address provided in the "International Warranty Conditions"...

  • Page 88: Other Problems

    ±15º vertically. The operating range for the remote control is approximately 6m. Set the projector up in a location where strong light will not shine onto the remote control light- receiving area. Insert new batteries, while making sure that they are inserted the correct way around.

  • Page 89: Problems Relating To Monitoring And Controlling Projectors Using A Network (Emp-765 Only)

    "International Warranty Conditions" section of the Safety Instructions/World-Wide Warranty Terms booklet. Check if the power supply to the location where the projector is set up has been interrupted, or if the circuit breaker for the electrical outlet that the projector is connected to has been tripped.
  • Page 90 Mode" menu setting to "Network ON". "Extended" - "Standby Mode" Check if the power supply to the location where the projector is set up has been interrupted, or if the circuit breaker for the electrical outlet that the projector is connected to has been tripped.
  • Page 91 LAN? Remedy Check that the wireless or wired LAN card is correctly inserted into the card slot of the projector. sp.17 "Inserting and Removing Cards" Check that the network cable is connected correctly. If it is not connected or is connected incorrectly, reconnect it.
  • Page 92 Enable the automatic ESSID search function, or set the ESSID for the computer or access point and the projector so that they are the same. s"Connecting in Access Point Mode or Wired LAN Mode" in the EasyMP Network Setup Guide If "WEP"...
  • Page 93 Problems Solving Network Screen images are not displayed or the speed is slow Check Are you trying to watch a movie in the Media Player, or preview a screen saver? Are you connecting in wireless LAN access point mode or wired LAN connection mode? Are you using WEPg encryption, or...
  • Page 94 Problems Solving Network Screen cannot be used Check Are you using a personal firewall? For Windows When running Microsoft Office applications using Network Screen, the screen does not change as required Check Have you been moving the mouse constantly? As long as the mouse cursor is moved, the screen does not change. Stop moving the mouse cursor Files do not work correctly with EMP SlideMaker2 Check Are you trying to use a PowerPoint (.ppt) file...
  • Page 95 If this happens, try closing EMP NS Connection and then restarting Carry out the following. • Turn the power on for the projector, complete the projector preparation and then click the "Search Again" button. • Check the projector's configuration setting for EasyMP.
  • Page 96 Reduce resolution and retry. There is a projector not responding. Enter the keyword displayed on the projector. Check the keyword for the projector that is displayed in the EasyMP standby screen, and enter that Remedy A communication error occurred between the computer and the projector, and the connection was closed.
  • Page 97 XGA (1024 × 768) or lower. The display of the computer being connected to the projector is set to a resolution of higher than XGA (1024 × 768), or the screen colour has been set to 24 bits or more.
  • Page 98 Check that "Wired LAN Connect Mode" or "Access Point Mode (Wireless LAN)" setting is being used in the EasyMP configuration settings for the projector to be connected. If "Easy Connect Mode" is selected in the "Wireless LAN" - "Basic" configuration menu, change the setting to "Access Point Mode".

  • Page 99: Appendices

    Appendices This chapter provides information on maintenance procedures to ensure the best level of performance from the projector. Maintenance ... 99 • Cleaning ...99 •Cleaning the Projector's Surface... 99 •Cleaning the Lens ... 99 •Cleaning the Air Filters and Air Intake Vent ... 99 •...

  • Page 100: Maintenance

    This section describes maintenance tasks such as cleaning the projector and replacing consumable parts. Cleaning You should clean the projector if it becomes dirty or if the quality of projected images starts to deteriorate. CAUTION Be sure to read the separate Safety Instructions/World-Wide Warranty Terms before cleaning.

  • Page 101: Replacing Consumables

    Maintenance Replacing Consumables This section describes how to replace the lamp and the air filters. Lamp Replacement Period It is time to replace the lamp when: • The message "Replace the Lamp." appears on the screen when projection starts. A message will be displayed. •...

  • Page 102: Replacing The Lamp

    • If you are replacing the lamp because it has stopped working, it is possible that the lamp is broken. If replacing the lamp of a projector which has been installed on the ceiling, you should always assume that the lamp is broken and handle it with extreme care during removal.
  • Page 103 Install the lamp cover. Insert the two cover tabs into the projector, and then press the other side of the lamp cover until it clicks into place. • Install the lamp securely. If the lamp cover is removed, the lamp turns off automatically as a safety precaution.

  • Page 104: Resetting The Lamp Operating Time

    Maintenance Resetting the Lamp Operating Time The projector has a built-in counter which keeps track of the lamp operating time. When the cumulative operating time reaches a certain point, it causes the replacement warning message to be displayed. Therefore, the counter needs to be reset after the lamp has been replaced with a new one.

  • Page 105: Replacing The Air Filter

    If the air filters are broken or if the warning message reappears after they have been cleaned, they should be replaced. The air filter can be replaced even if the projector is installed on a ceiling. PROCEDURE Turn off the projector's power, wait until the "pip-pip"...

  • Page 106: Saving A User's Logo

    Remote Control Select "User’s Logo" from the "Extended" menu, and then press the [Enter] button. Projector • If the "User’s Logo Protect" function of "Password Protect" is set to "ON", a message is displayed and the user's logo can not be recorded.
  • Page 107 Tilt the [ ] button on the remote control or press the [ ], [ ], [ ] and [ ] buttons on the projector's control panel to select the area of the image to use as the user's logo, and then press the [Enter] button.
  • Page 108 "Completed." will be displayed. • Saving the user's logo may take a few moments (about 15 seconds). Do not use the projector or any other sources which are connected to the projector while the user's logo is being saved, otherwise it may result in errors in projector operation.

  • Page 109: Optional Accessories And Consumables

    Pipe 370 (370 mm (14.57 in.)/silver)* ELPFP04 Pipe 570 (570 mm (22.44 in.)/silver)* ELPFP05 Pipe 770 (770 mm (30.31 in.)/silver)* ELPFP06 Use when installing the projector on a high ceiling or a ceiling with veneer panels. Ceiling mount * ELPMB18 Use when installing the projector to a ceiling.

  • Page 110: Glossary

    Cool-down This is the process by which the projector's lamp is cooled down after it has become hot through use. Cool-down is carried out automatically when the [Power] button is pressed to turn off the power. Do not disconnect the power cable while cool-down is in progress, otherwise the cool-down process will not work properly.
  • Page 111 EMP Link 21L A utility software program that allows the projector to be connected to a computer so that the computer can be used to control the projector. For details on acquiring the software and for instructions on using the software and compatible projector models, please visit the Web site http://www.epson.co.uk/support/download/index.htm.
  • Page 112 In this mode, wide-screen images in 16:9 mode are compressed in the horizontal direction so that they are stored on the recording medium as 4:3 images. When these images are played back by the projector in squeeze mode, they are restored to their original 16:9 format. sRGB An international standard for colour intervals that was formulated so that colours which are reproduced by video equipment can be handled easily by computer operating systems (OS) and the Internet.
  • Page 113 Glossary Abbreviation for Wi-Fi Protected Access. This is an encryption standard that improves security which is a weak point of WEPg. TKIPg A type of video signal with a resolution of 1024 (horizontal) × 768 (vertical) dots which is used by IBM PC/AT-compatible computers.

  • Page 114: List Of Esc/Vp21 Commands

    List of ESC/VP21 Commands Command List When a power on command is sent to the projector, the power will turn on and the projector will change to warm-up mode. When the power has turned on, a colon ":" (3Ah) will be returned.

  • Page 115: Usb Connection Setup

    List of ESC/VP21 Commands USB Connection Setup In order to control the projector using ESC/VP21 commands via a USB connection, the following preparations must be carried out. PROCEDURE Download the USB driver (USB-COM Driver) from the EPSON website to your computer.

  • Page 116: List Of Supported Monitor Displays

    List of Supported Monitor Displays Computer/RGB Video Refresh rateg Resolution Signal (Hz) (dots) VGAg 640×480 VGAEGA 640×350 VESA 60/72/75/85,iMac* 640×480 56/60/72/75/ SVGAg 800×600 85,iMac* XGAg 60/70/75/85,iMac* 1024×768 SXGAg 70/75/85 1152×864 SXGA 60/75/85 1280×960 SXGA 60/75/85 1280×1024 UXGAg 1600×1200 MAC13" 640×480 MAC16"...

  • Page 117: Specifications

    1 RCA pin jack 1 USB connector (type B) – User’s Guide Pixelworks DNX ICs are used in this Projector. Angle of tilt If you set the projector higher than 12º, it could damage the projector and cause an accident.
  • Page 118 Specifications Safety UL60950 Third Edition Canada CSA C22.2 No.60950 European Community The Low Voltage Directive (73/23/EEC) IEC60950 3 Edition FCC Part15B Class B (DoC) Canada ICES-003 Class B European Community The EMC Directive (89/336/EEC) EN55022, 1998 Class B EN55024, 1998 IEC/EN61000-3-2, IEC/EN61000-3-3 Australia/New Zealand AS/NZS CISPR 22:2002 Class B...

  • Page 119: Appearance

    User’s Guide Appearance 14.5 99.6 Centre of lens 107.5 40.84* 75.5 3-M4×9 *Distance from center of lens to suspension bracket fixing point Units: mm...
  • Page 120 According to 47CFR, Part 2 and 15 Class B Personal Computers and Peripherals; and/or CPU Boards and Power Supplies used with Class B Personal Computers :EPSON AMERICA, INC. Located at :3840 Kilroy Airport Way MS: 3-13 Long Beach, CA 90806...
  • Page 121 Neither is any liability assumed for damages resulting from the use of the information contained herein. Neither SEIKO EPSON CORPORATION nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses,...

This manual is also suitable for:

Emp-765Emp-755Emp-750

Table of Contents

Save PDF