User manual S19C150N S19C150F S20C150FL S22C150N The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance. BN46-00338B-01...
Checking the Components Parts Frontal Button Reverse Side Installation Attaching the Stand (S19C150F / S20C150FL) Attaching the Stand (S19C150N / S22C150N) Removing the Stand (S19C150F / S20C150FL) Removing the Stand (S19C150N / S22C150N) Installing a Wall-mount Kit or Desktop Stand...
Page 4
Table Of Contents Blue Configuring Blue Color Tone Configuring the Color Tone Settings Gamma Configuring Gamma COORDINATING OSD Language Configuring Language Menu H-Position & Menu V-Position Configuring Menu H-Position & Menu V- Position Display Time Configuring Display Time Transparency Changing Transparency SETUP AND RESET Reset Initializing Settings (Reset)
Page 5
Testing the Product Checking the Resolution and Frequency Check the following. Q & A SPECIFICATIONS General (S19C150N / S22C150N) General (S19C150F / S20C150FL) PowerSaver Standard Signal Mode Table APPENDIX Contact SAMSUNG WORLD WIDE Responsibility for the Pay Service (Cost to Customers)
Page 6
Table Of Contents Correct Disposal Correct Disposal of This Product (Waste Electrical & Electronic Equipment) Terminology INDEX Table Of Contents...
The contents of this manual are subject to change without notice to improve quality. 2013 Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. Microsoft and Windows are registered trademarks of Microsoft Corporation.
Before Using the Product Cleaning Cleaning Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. Take the following steps when cleaning. 1. Power off the monitor and computer. 2. Disconnect the power cord from the monitor. Hold the power cable by the plug and do not touch the cable with wet hands.
3.93 inches inches (10 cm) (10 cm) 3.93 inches(10 cm) Precautions for storage Be sure to contact Samsung Customer Service Center (page 83) if the inside of the monitor needs cleaning. (Service fee will be charged.) Before Using the Product...
Before Using the Product Safety Precautions Caution RISK OF ELECTRIC SHOCK DO NOT OPEN Caution: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL. This symbol indicates that high voltage is present inside.
Before Using the Product Electricity and Safety The following images are for reference only. Real-life situations may differ from what is shown in the images. Warning Do not use a damaged power cord or plug, or a loose power socket. An electric shock or fire may result.
The product may become damaged by an electric shock. Do not use the power cord for products other than authorized products supplied by Samsung. An electric shock or fire may result. Keep the power socket where the power cord is connected unobstructed.
Page 13
Before Using the Product Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.). The product may fall and break or cause a personal injury. Using the product in an area with excess vibration may damage the product ...
Be sure to consult Samsung Customer Service Center (page 83) before installation if you want to install the product at such a place.
Page 15
(paper, match, etc.) into the vent or ports of the product. If water or any foreign substance enters the product, be sure to power off the product, remove the power cord, and contact Samsung Customer Service Center (page 83). Product failure, an electric shock or fire may result.
Page 16
Before Using the Product Caution Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels. If you are not going to use the product for an extended period of time, ...
Page 17
Before Using the Product Do not hold the monitor upside-down or move it by holding the stand. The product may fall and break or cause a personal injury. Do not use humidifiers or stoves around the product. An electric shock or fire may result. ...
Before Using the Product Correct posture to use the product Use the product in the correct posture as follows: Straighten your back. Allow a distance of 45 to 50 cm between your eye and the screen, and look slightly ...
Preparations Checking the Contents 1.1.1 Removing the Packaging Open the packaging box. Be careful not to damage the product when you open the packaging with a sharp instrument. Remove the styrofoam from the product. Check the components and remove the styrofoam and plastic bag. This image is for reference only.
Preparations 1.1.2 Checking the Components Contact the dealer from whom you purchased the product if any item is missing. The appearance of the components and items sold separately may differ from the image shown. Components Quick setup guide Warranty card User manual (Not available in some locations)
Preparations Parts 1.2.1 Frontal Button The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Function Key Guide SAMSUNG SAMSUNG MENU AUTO Icons Description Open or close the onscreen display (OSD) menu, or return to the parent menu.
Page 22
Preparations Icons Description Move to the upper or lower menu or adjust the value for an option on the OSD menu. Use this button to control the brightness and contrast of the screen. Confirm a menu selection. Press the [ ] button to automatically adjust the screen settings.
The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Provided ports may vary depending on the product. S19C150F / S20C150FL S19C150N / S22C150N DC 14V RGB IN DC 14V...
Preparations Installation 1.3.1 Attaching the Stand (S19C150F / S20C150FL) Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. Insert the stand neck into the Check that the stand neck is...
Preparations 1.3.2 Attaching the Stand (S19C150N / S22C150N) Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. Insert the stand neck into the Check that the stand neck is Tightly fasten the connecting stand base in the direction firmly connected.
Preparations 1.3.3 Removing the Stand (S19C150F / S20C150FL) Place a soft cloth over the table to protect the product and place the product onto the cloth so that the front of the product faces downwards. While holding the stand neck with one hand, pound the other fisted hand down onto the top of the stand base in the direction of the arrow to detach the stand base.
Preparations 1.3.4 Removing the Stand (S19C150N / S22C150N) Place a soft cloth over the table to protect the product and place the product onto the cloth so that the front of the product faces downwards. While holding the stand neck with one hand, pound the other fisted hand down onto the top of the stand base in the direction of the arrow to detach the stand base.
The product may get damaged or fall and cause personal injury. Samsung shall not be held liable for any damage or injury caused by using improper screws or attaching the wall-mount kit or desktop stand using excessive force.
1.3.6 Adjusting the Product Tilt The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. S19C150F / S20C150FL S19C150N / S22C150N You can adjust the tilt of your monitor.
An anti-theft lock allows you to use the product securely even in public places. The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details. The lock device is sold separately. S19C150F / S20C150FL S19C150N / S22C150N DC 14V RGB IN The color and shape of parts may differ from what is shown.
Connecting and Using a Source Device Before Connecting S19C150F / S20C150FL S19C150N / S22C150N DC 14V RGB IN 2.1.1 Pre-connection Checkpoints Before connecting a source device, read the user manual provided with it. The number and locations of ports on source devices may differ from device to device.
Connect the power adapter to [DC 14V] jack on the rear of the product. Connect the power cable to the DC power adapter. Next, connect the DC power adapter to the product. Plug in the power cable to the power socket. S19C150F / S20C150FL DC 14V S19C150N / S22C150N DC 14V The input voltage is switched automatically.
Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable. S19C150F / S20C150FL RGB IN Connect the D-SUB cable to the [RGB IN] port on the back of the product and the RGB port on the PC.
An installation driver is contained on the CD supplied with the product. If the file provided is faulty, visit the Samsung homepage (http://www.samsung.com/) and download the file. Insert the user manual CD provided with the product into the CD-ROM drive.
Connecting and Using a Source Device 2.3.3 Setting Optimum Resolution An information message about setting optimum resolution will appear if you power on the product for the first time after purchase. Select a language on the product and change the resolution on your PC to the optimum setting. The optimal resolution for this monitor is as follows: **** x **** **Hz...
Connecting and Using a Source Device 2.3.4 Changing the Resolution Using a PC Adjust the resolution and refresh rate in Control Panel on your PC to obtain optimum picture quality. The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected. ...
Page 37
Connecting and Using a Source Device Changing the Resolution on Windows Vista Go to Control Panel Personalization Display Settings and change the resolution. *********** *********** 2 Connecting and Using a Source Device...
Page 38
Connecting and Using a Source Device Changing the Resolution on Windows 7 Go to Control Panel Display Screen Resolution and change the resolution. 2 Connecting and Using a Source Device...
Page 39
Connecting and Using a Source Device Changing the Resolution on Windows 8 Go to Settings Control Panel Display Screen Resolution and change the resolution. 2 Connecting and Using a Source Device...
] on the product. Press [ ] to move to Brightness and press [ ] on the product. The following screen will appear. PICTURE Brightness Contrast Sharpness SAMSUNG MAGIC Bright Custom SAMSUNG MAGIC Upscale Wide Image Size H-Position AUTO AUTO AUTO...
] on the product. Press [ ] to move to Contrast and press [ ] on the product. The following screen will appear. PICTURE Brightness Contrast Sharpness SAMSUNG MAGIC Bright Custom SAMSUNG Upscale MAGIC Wide Image Size H-Position AUTO AUTO...
] on the product. Press [ ] to move to Sharpness and press [ ] on the product. The following screen will appear. PICTURE Brightness Contrast Sharpness SAMSUNG MAGIC Bright Custom SAMSUNG Upscale MAGIC Image Size Wide H-Position AUTO AUTO...
Eco Saving is enabled. You can customize the brightness to suit your preferences. 3.4.1 Configuring SAMSUNG MAGIC Bright Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen.
Cinema Dynamic Contrast mode. 3.5.1 Configuring SAMSUNG MAGIC Upscale Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. Press [ ] to move to...
] on the product. Press [ ] to move to Image Size and press [ ] on the product. The following screen will appear. PICTURE Brightness Contrast Sharpness SAMSUNG MAGIC Bright Custom SAMSUNG Upscale MAGIC Auto Image Size Wide H-Position AUTO...
] to move to H-Position or V-Position, and press [ The following screen will appear. PICTURE PICTURE Brightness V-Position Contrast Coarse 2240 Sharpness Fine SAMSUNG MAGIC Bright Custom SAMSUNG Upscale MAGIC Image Size Wide H-Position AUTO AUTO AUTO AUTO AUTO...
Screen Setup Coarse Adjust the screen frequency. 3.8.1 Adjusting Coarse Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. Press [ ] to move to PICTURE and press [ ] on the product.
Screen Setup Fine Fine-adjust the screen to obtain a vivid picture. 3.9.1 Adjusting Fine Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. Press [ ] to move to PICTURE and press [...
Configuring Tint Adjust the tint of the screen. This menu is not available when Bright is set to Cinema Dynamic Contrast mode. Adjust the value of the color red in the picture. (Range: 0~100) A higher value will increase the intensity of the color. 4.1.1 Configuring Red Press any button on the front of the product to display the Function Key Guide.
Configuring Tint Green Adjust the value of the color green in the picture. (Range: 0~100) A higher value will increase the intensity of the color. 4.2.1 Configuring Green Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen.
Configuring Tint Blue Adjust the value of the color blue in the picture. (Range: 0~100) A higher value will increase the intensity of the color. 4.3.1 Configuring Blue Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen.
Configuring Tint Color Tone Adjust the general color tone of the picture. 4.4.1 Configuring the Color Tone Settings Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. Press [ ] to move to COLOR...
Configuring Tint Gamma Adjust the mid-range brightness (Gamma) of the picture. 4.5.1 Configuring Gamma Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. Press [ ] to move to COLOR and press [...
Coordinating OSD Language Set the menu language. A change to the language setting will only be applied to the onscreen menu display. It will not be applied to other functions on your PC. 5.1.1 Configuring Language Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen.
Coordinating OSD Menu H-Position & Menu V-Position Menu H-Position: Move the menu position to the left or right. Menu V-Position: Move the menu position up or down. 5.2.1 Configuring Menu H-Position & Menu V-Position Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen.
Coordinating OSD Display Time Set the on-screen display (OSD) menu to automatically disappear if the menu is not used for a specified period of time. Display Time can be used to specify the time after which you want the OSD menu to disappear. 5.3.1 Configuring Display Time Press any button on the front of the product to display the Function Key Guide.
Coordinating OSD Transparency Set the transparency for the menu windows: 5.4.1 Changing Transparency Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. Press [ ] to move to MENU SETTINGS and press [...
] on the product. Press [ ] to move to Reset and press [ ] on the product. The following screen will appear. SAMSUNG MAGIC Bright AUTO EXIT AUTO Press [ ] to move to the option you want and press [ The selected option will be applied.
Press [ ] to move to Eco Saving and press [ ] on the product. The following screen will appear. SAMSUNG MAGIC Bright AUTO AUTO 75%: Change the monitor power consumption to 75% of the default level. 50%: Change the monitor power consumption to 50% of the default level.
Press [ ] to move to Off Timer and press [ ] on the product. The following screen will appear. SAMSUNG MAGIC Bright AUTO AUTO Off: Deactivate the off timer so that the product does not power off automatically. ...
[ ] on the product. Press [ ] to move to Turn Off After and press [ ] on the product. The following screen will appear. SAMSUNG MAGIC Bright AUTO AUTO AUTO Press [ ] to configure Turn Off After.
Setup and Reset Key Repeat Time Control the response rate of a button when the button is pressed. 6.5.1 Configuring Key Repeat Time Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen.
[ ] on the product. Press [ ] to move to Customized Key and press [ ] on the product. The following screen will appear. SAMSUNG MAGIC Bright AUTO Bright Eco Saving Image Size Press [ ] to move to the option you want and press [ The selected option will be applied.
INFORMATION Menu and Others INFORMATION View the current input source, frequency and resolution. 7.1.1 Displaying INFORMATION Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. Press [ ] to move to INFORMATION.
INFORMATION Menu and Others Configuring Brightness and Contrast in the Initial Screen Adjust the Brightness, Contrast using the [ ] buttons when the initial screen (that displays no menu screen) is displayed. Press any button on the front of the product (when no menu screen is displayed) to display the Function Key Guide.
Installing the Software MagicTune 8.1.1 What is "MagicTune"? "MagicTune" is a software program that helps with monitor adjustments by providing comprehensive descriptions of monitor functions and easy-to-understand guidelines. You can adjust the product with the mouse and the keyboard without using the operating buttons of the product.
Wait until a message box appears informing you that the software has been removed completely. For technical support, the FAQ (frequently asked questions) or information about the software upgrade for "MagicTune™", please visit our website (http://www.samsung.com/us/consumer/ learningresources/monitor/magetune/pop_intro.html). 8 Installing the Software...
Installing the Software MultiScreen "MultiScreen" enables users to use the monitor by partitioning multiple sections. 8.2.1 Installing the Software Insert the installation CD into the CD-ROM drive. Select the "MultiScreen" setup program. If the pop-up screen for the software installation does not appear on the main screen, find and double-click the "MultiScreen"...
Installing the Software Hardware At least 32MB of memory At least 60MB of free space on the hard disk drive 8.2.2 Removing the Software Click Start, select Settings/Control Panel, and then double-click Add or Remove Programs. Select "MultiScreen" from the program list and click the Add/Delete button. 8 Installing the Software...
Requirements Before Contacting Samsung Customer Service Center 9.1.1 Testing the Product Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. Check if your product is operating normally by using the product test function.
Page 71
Troubleshooting Guide Screen issue The message Check Signal Cable appears. Check that the cable is properly connected to the product. (Refer to "2.3 Connecting and Using a PC") Check that the device connected to the product is powered on. Not Optimum Mode is displayed.
Page 72
Troubleshooting Guide Source device issue A beeping sound is heard when my PC is booting. If a beeping sound is heard when your PC is booting, have your PC serviced. 9 Troubleshooting Guide...
Page 73
Troubleshooting Guide Q & A Question Answer How can I change the Set the frequency on your graphics card. frequency? Windows XP: Go to Control Panel Appearance and Themes Display Settings Advanced Monitor, and adjust Refresh rate under Monitor settings. Windows ME/2000: Go to Control Panel Display Settings...
Page 74
Troubleshooting Guide Question Answer How can I change the Windows XP: Go to Control Panel Appearance and Themes resolution? Display Settings, and adjust the resolution. Windows ME/2000: Go to Control Panel Display Settings, and adjust the resolution. Windows Vista: Go to Control Panel ...
Specifications 10.1 General (S19C150N / S22C150N) Model Name S19C150N S22C150N Panel Size 18.5 Inches (47 cm) 21.5 Inches (54 cm) Display area 409.8 mm (H) x 230.4 mm 476.64 mm (H) x 268.11 mm (V) 16.1 Inches (H) x 9.1 18.8 Inches (H) x 10.6 Inches (V) Inches (V)
Page 76
The above specifications are subject to change without notice to improve quality. This device is a Class B digital apparatus. (USA only) Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website: www.samsung.com/recyclingdirect or call, (877) 278 - 0799 10 Specifications...
Specifications 10.2 General (S19C150F / S20C150FL) Model Name S19C150F S20C150FL Panel Size 18.5 Inches (47 cm) 19.5 Inches (49 cm) Display area 409.8 mm (H) x 230.4 mm 432 mm (H) x 239.76 mm 16.1 Inches (H) x 9.1 17 Inches (H) x 9.4 Inches...
Page 78
The above specifications are subject to change without notice to improve quality. This device is a Class B digital apparatus. (USA only) Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website: www.samsung.com/recyclingdirect or call, (877) 278 - 0799 10 Specifications...
Power Consumption 13 W Typical 0.3 W Typical 0.3 W (S19C150N) Power Consumption 13 W Typical 0.3 W Typical 0.3 W (S19C150F) Power Consumption 16 W Typical 0.3 W Typical 0.3 W (S20C150FL) Power Consumption 23 W Typical 0.3 W Typical 0.3 W...
If the signal transmitted from the PC does not belong to the standard signal modes, the screen may be blank even though the power LED turns on. In such a case, change the settings according to the following table by referring to the graphics card user manual. S19C150N / S19C150F Horizontal Vertical...
Page 81
Specifications S20C150FL Horizontal Vertical Pixel Clock Sync Polarity Resolution Frequency Frequency (MHz) (H/V) (kHz) (Hz) IBM, 720 x 400 31.469 70.087 28.322 VESA, 640 x 480 31.469 59.940 25.175 MAC, 640 x 480 35.000 66.667 30.240 VESA, 640 x 480 37.861 72.809 31.500...
Page 82
Specifications S22C150N Horizontal Vertical Pixel Clock Sync Polarity Resolution Frequency Frequency (MHz) (H/V) (kHz) (Hz) IBM, 720 x 400 31.469 70.087 28.322 MAC, 640 x 480 35.000 66.667 30.240 MAC, 832 x 624 49.726 74.551 57.284 MAC, 1152 x 870 68.681 75.062 100.000...
Appendix Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. NORTH AMERICA U.S.A 1-800-SAMSUNG (726-7864) http://www.samsung.com CANADA 1-800-SAMSUNG (726-7864) http://www.samsung.com/ca (English) http://www.samsung.com/ca_fr (French) MEXICO 01-800-SAMSUNG (726-7864) http://www.samsung.com...
use of supplies or separately sold product unspecified by Samsung. repair from a person besides an engineer of outsourcing service company or partner of Samsung Electronics Co., Ltd. remodeling or repairing the product by customer.
Appendix Correct Disposal Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life.
Page 91
Appendix Terminology OSD (On Screen Display) On screen display (OSD) allows you to customize on-screen settings to optimize the picture quality as required. You can change the screen brightness, tint, size and many other settings using menus displayed on the screen. Gamma The Gamma menu adjusts the grey scale that represents middle tones on the screen.
Page 92
Appendix Resolution Resolution is the number of horizontal pixels and vertical pixels that form a screen. It represents the level of display detail. A higher resolution displays a greater amount of information on the screen and is suitable for performing multiple tasks at the same time. E.g.
Page 93
Brightness Key Repeat Time Checking the Contents Cleaning Language Coarse Color Tone Connecting and Using a PC MagicTune Contact SAMSUNG WORLD WIDE MultiScreen Contrast Copyright Correct Disposal Correct posture to use the product Off Timer Customized Key Parts Display Time Q &...
Page 94
Index Sharpness Standard Signal Mode Table Terminology Transparency Turn Off After Index...