Page 2
If you have a question concerning the installa- Proper installation is the responsibility of the tion of this product, call the GE Answer installer. Product failure due to improper Center ® Consumer Information Service at installation is not covered under the GE 800.626.2000,...
Page 3
• The fi'ont surface of the oven will be nearly flush with surrounding cabinetry doors. • For personal safety, tbis oven cannot • This oven can be installed over any GE/ installed in a cabinet arrangement such as an Monogram single electric buih-in oven or a island or peninsula.
Page 4
Four S ides 3B3j4M,0 Required Order a 30" wide single oven cabinet or cut *If you are replacing a GE/Monogram electric double oven with the combined installation the opening in a wall to dimensions shown. of a Speedcook and single...
Page 5
Speedeook and Wall Oven Installation: Product rating is 120/208 or 120/240 volt, 60 Requirements When installed in combination with a GE/ Hz, 30 amps. This product must be connected to a supply circuit of the proper voltage Monogram single wall oven,...
Page 6
Installation Built-In Speedcook Ovens • Open the door and remove packing material IMPORTANT:To protect the bottom trim, do with ceramic tray. not remove the styrofoam shipping base until • Locate owners kit in carton. Remove and the oven is slipped into the opening. save.
Page 7
Installation Built-In Speedcook Ovens Electrical Shock Hazard • Electrical ground is required on the appliance. • Do not connect the electrical supply until Connect appliance is permanently grounded. • Disconnect power to the junction box before Elect Jcal making the electrical connection.
Page 8
Pub, Ne,49-40103 DWG. NO. 164D3370P101 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE (N.D. 530) 2/00 Printed in Korea LG P/N 3828W5U0080...