Models/Modelos/Modeles
110.2685_, 2686_, 2688:_<
Electrical
Shock Hazard
Plug into a grounded
3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension
cord.
Failure to follow these instructions can result in
death, fire, or electrical
shock.
START
_/?
SJ
Measure detergent and pour into washer.
Drop sorted load loosely into washer Load evenly
around agitator to maintain balance.
Close the lid.
Adjust controls based on your load.
Pull out Cycle Selector (Timer) knob to start.
Push in Cycle Selector (Timer) knob to stop the washer.
W W£1 klI!!VEk ©@IWR@L
Adjust to load size. Clothes should move freely. To
change the water level after the wash action starts, you
may turn knob to desired setting. On models with Variable
Water Level Control, you can change the water level by
turning the knob to Reset, then to the desired setting. This
is only necessary when the change needs to be done
once the machine has started to fill.
8566907
Fire Hazard
Never place items in the washer that are
dampened with gasoline or other flammable
fluids.
No washer can completely remove oil,
Do not dry anything that has ever had any type of
oil on it (including cooking oils).
Doing so can result in death, explosion,
or fire.
You should select the wash/rinse water
temperature based on the type of load you are
washing. Always use the warmest wash water
safe for fabric and follow garment label
instructions. Depending on location, water
temperatures may vary by season. The fill rate
may also differ depending on the water
temperature selected.
Your washer has an Automatic Temperature
Control (ATC). ATC electronically senses and
maintains a set water temperature in the
washtub by alternating between incoming hot and
cold water.
J
Continuedon back