Page 1
(KEEP FOR FURTHER REFERENCE) FOR WHIRLPOOL TRIM-KIT MODELS' MK1157XJ, MK1150XJ ° FOR USE WITH WHIRLPOOL AND KITCHEN AID MICROWAVE OVEN MODELS : GM8155XJ, KCMC155J, YKCMC155.1 • UL AND CSA LISTED - FOR USE OVER ELECTRIC HEAT SOURCE (INCLUDING MODELS-27": (Y)RBS275PD, (Y)GBS277PD, (Y)KEBI171D, (Y)KEBS177D -30"...
Page 2
STEP1 Electrical Shock Hazard Disoonnect power before installing trim kit. Replace all panels before operating. Failure to do so can result in death or electrical shock. 1. Remove any loose items inside the Front microwave oven. 2. Disconnect the microwave oven before Rear proceeding with installation.
Page 3
STEP3 1. On the cutout floor, mark hole centers for the anti-tip brackets as shown using the supplied template. Be sure to align the center line of template to center line of cutout floor. 2. Ddll two holes for anti-tip bracket. (use 7/64"...
Page 4
STEP 5 Pilot Ilole Cutout Opening 1. Place the trim kit frame over the microwave oven. Important Note : Trim kit frame orientation is important. Orient the frame so that louvers are sloping downward to the front. (See Figure Detail "B"). 1"Screws(4) 2.