Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Installation Manual
Operating Instructions
Color CCTV Camera
WV-CW324LE Series
Model No.
WV-CF314LE Series
WV-CW324LE
WV-CF314LE
This manual covers the models: WV-CW324LE Series (WV-CW324LE, WV-CW314LE, WV-CW304LE) and WV-CF314LE
Series (WV-CF314LE, WV-CF304LE).
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
The model number is abbreviated in some descriptions in this manual.
Advertisement
Chapters
Table of Contents
Related Manuals for Panasonic WV-CW324LE Series
Summary of Contents for Panasonic WV-CW324LE Series
-
Page 1: Operating Instructions
Model No. WV-CF314LE Series WV-CW324LE WV-CF314LE This manual covers the models: WV-CW324LE Series (WV-CW324LE, WV-CW314LE, WV-CW304LE) and WV-CF314LE Series (WV-CF314LE, WV-CF304LE). Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. -
Page 2: Preface
Preface About the user manuals The operating instructions of the camera consist of 2 sets: these operating instructions (PDF) and Installation Guide. This document explains how to configue the settings of the camera. Refer to the installation guide for further information about how to install the camera. ®... -
Page 3: Table Of Contents
Contents Preface .................. 2 18. Auto back focus settings for switching between About the user manuals ............ 2 color and black-and-white modes [CL↔B/W] .... 24 Trademarks and registered trademarks ......2 Special menu setting [SPECIAL SETUP] ......25 About notations ..............2 19. -
Page 4: About The Setup Menus
About the setup menus Performing each setting item in the setup menu should be completed in advance to use this unit. Perform the settings for each item in accordance with the conditions of the camera shooting area. List of setup menu Setup item Description CAMERA ID... -
Page 5: Basic Operation
Basic operation The operations in the setup menu are performed with the operation buttons after calling up the setup menu on the connected video monitor. The description below explains how to operate the setup menu basically. Screenshots of WV-CF314LE are shown as an example. Screenshot 1 Hold down the [SET] button for about 2 seconds to call up the Step 1... -
Page 6: Screen Transition Diagram
Screen transition diagram CW324L CW314L CW304L CF314L Top screen “CAMERA ID” screen CF304L MODEL WV-CW324L **CAMERA ID** CAMERA ID 0123456789 CAMERA ABCDEFGHIJKLM SYSTEM NOPQRSTUVWXYZ BACK-FOCUS ().,'":;&#!?= SPECIAL +-*/%$ LANGUAGE SPACE POSI RET TOP END RESET ....SETUP DISABLE “CAMERA SETUP” screen **CAMERA SETUP** SCENE1 ALC/ELC... -
Page 7: Cw314L Cw314L Cw314L Cw314L Cw314L
CW324L Screen transition diagram CW314L CW304L CF314L CF304L Top screen “CAMERA ID” screen MODEL WV-CW314L **CAMERA ID** CAMERA ID 0123456789 CAMERA ABCDEFGHIJKLM SYSTEM NOPQRSTUVWXYZ BACK-FOCUS ().,'":;&#!?= SPECIAL +-*/%$ LANGUAGE SPACE POSI RET TOP END RESET ....SETUP DISABLE “CAMERA SETUP” screen **CAMERA SETUP** SCENE1 ALC/ELC... -
Page 8: Screen Transition Diagram
CW324L CW314L Screen transition diagram CW304L CF314L CF304L Top screen “CAMERA ID” screen MODEL WV-CW304L **CAMERA ID** CAMERA ID 0123456789 CAMERA ABCDEFGHIJKLM SYSTEM NOPQRSTUVWXYZ SPECIAL ().,'":;&#!?= LANGUAGE +-*/%$ SPACE POSI RET TOP END RESET ....SETUP DISABLE “CAMERA SETUP” screen **CAMERA SETUP** SCENE1 ALC/ELC... -
Page 9: Screen Transition Diagram
CW324L CW314L CW304L Screen transition diagram CF314L CF304L “ ” MODEL WV-CF314L **CAMERA ID** CAMERA ID 0123456789 CAMERA ABCDEFGHIJKLM SYSTEM NOPQRSTUVWXYZ BACK-FOCUS ().,'":;&#!?= SPECIAL +-*/%$ LANGUAGE SPACE POSI RET TOP END RESET ....SETUP DISABLE “CAMERA SETUP” screen **CAMERA SETUP** SCENE1 ALC/ELC SHUTTER... -
Page 10: Screen Transition Diagram
CW324L CW314L CW304L CF314L Screen transition diagram CF304L “ ” MODEL WV-CF304L **CAMERA ID** CAMERA ID 0123456789 CAMERA ABCDEFGHIJKLM SYSTEM NOPQRSTUVWXYZ SPECIAL ().,'":;&#!?= LANGUAGE +-*/%$ SPACE POSI RET TOP END RESET ....SETUP DISABLE “CAMERA SETUP” screen **CAMERA SETUP** SCENE1 ALC/ELC SHUTTER ON(LOW) -
Page 11: Camera Title Setting [Camera Id]
Camera title setting [CAMERA ID] This item specified the camera title. The camera title that indicates the camera location and other information about the camera is created with alphanumerics and symbols, and is displayed on the screen. The camera title is named with up to 16 characters. Follow the procedure below to specify the camera title. -
Page 12: Camera Operation Setting [Camera Setup]
Camera operation setting [CAMERA SETUP] The following describes the camera operation settings. The following settings can be configured on the “CAMERA SETUP” screen displayed from the top screen. Refer to page 5 for how to call up the screen. The settings configured on the “CAMERA SETUP” screen will be saved as a scene file. 1. - Page 13 Follow the procedure below. “CAMERA SETUP” screen “ALC CONT” screen Mask setting screen **ALC CONT**(1) **CAMERA SETUP** SCENE1 BACK LIGHT COMP ALC/ELC SHUTTER ON(LOW) SENS UP WHITE BAL ATW1 HIGH MASK SET D&N(IR) AUTO2 LEVEL .I..RET TOP END RET TOP END Step 1 Set “ALC/ELC”...
-
Page 14: Electronic Shutter Setting [Shutter]
Step 5 Press the [UP], [DOWN], [RIGHT], and [LEFT] buttons to move the flashing cursor to the area to be masked and press the [SET] button. When the selected area is masked, the masked area will start blinking (between stripes and white). When the flashing cursor is moved to other areas, the masked area will be displayed in white. -
Page 15: White Balance Setting [White Bal]
CW324L CW314L CW324L Note: CW324L CW304L CW314L • When “ALC/ELC” is set to “ELC” or “ALC+”, only the AUTO mode is enabled. CW324L CW314L CF314L CW324L CW304L • When “SHUTTER” is set to options other than “OFF”, the electronic sensitivity enhancement setting cannot be CW314L CW304L CF304L... -
Page 16: Manual Fine Adjustment Of White Balance
Manual fine adjustment of white balance The white balance is manually fine adjusted after white balance automatically adjustment in the automatic color temperature tracking mode (ATW1, ATW2) or automatic white balance control mode (AWC). Follow the procedures below. “CAMERA SETUP” screen Fine adjustment screen Area setting screen **CAMERA SETUP**... -
Page 17: Scene1
“D&N (IR)” screen “CAMERA SETUP” screen **CAMERA SETUP** **D&N(IR) **(1) SCENE1 ALC/ELC AUTO2 SHUTTER LEVEL HIGH . I .. ON(LOW) DURATION TIME SENS UP WHITE BAL ATW1 HIGH BURST(BW) D&N(IR) AUTO2 IR LED LIGHT RET TOP END RET TOP END Step 1 Move the cursor to “D&N (IR)”... -
Page 18: Vmd Setting [Vmd]
Step 5 Move the cursor to “BURST (BW)”, and decide whether or not to provide a burst signal output in the black-and-white mode. ON (default): Provides a burst signal output. OFF: Does not provide any burst signal output. Note: • Images may not be displayed appropriately without burst signals when camera images are displayed in the black-and-white mode depending on a monitor or VTR model to be used. -
Page 19: Setting Of Motion Detection
“CAMERA SETUP” screen “MOTION DET” screen **CAMERA SETUP** ** MOTION DET **(1) SCENE1 ALC/ELC ..I .. 20 LEVEL SHUTTER ON(LOW) DWELL TIME SENS UP DISPLAY MODE WHITE BAL ATW1 ALARM HIGH D&N(IR) AUTO2 MASK SET MOTION DET RET TOP END RET TOP END Setting of motion detection Move the cursor to “VMD”, press the [LEFT ] or [RIGHT ] button to select “MOTION DET”. -
Page 20: Setting Of Scene Change Detection
“MOTION DET” screen Display mode screen ** MOTION DET **(1) ..I .. 20 LEVEL DWELL TIME DISPLAY MODE ALARM MASK SET RET TOP END Step 6 Move the cursor to “LEVEL” and press the [RIGHT] or [LEFT] button to adjust the level. Repeat step 5 and 6 to adjust to optimal level. -
Page 21: Camera System Setting [System Setup]
Camera system setting [SYSTEM SETUP] Performs the settings relating to the camera system such as synchronization, alarm input/output terminal and privacy zone. The following settings can be configured on the “SYSTEM SETUP” screen displayed from the top screen. Refer to page 5 for how to call up the screen. “SYSTEM SETUP”... -
Page 22: Image Stabilizer Setting [Stabilizer]
Step 5 Press the [UP], [DOWN], [RIGHT], and [LEFT] buttons to determine the lower right position of the zone to be set and press the [SET] button. → An asterisk “*” will be displayed after the number and the zone setting will be saved. Step 6 When “ON (2)”... -
Page 23: Upside-Down Setting [Upside-Down]
Step 2 Move the cursor to “→ PUSH SET” of “ZOOM” and press the [SET] button. → The zoom setting screen appears. Step 3 Adjust the angular field of view by changing the electronic zoom factor (up to 2x) using the [UP] or [DOWN] button, and press the [SET] button. -
Page 24: Cw314L
CW314L CW324L CW304L Back focus setting [BACK-FOCUS SETUP] CW324L CW314L CF314L CW314L CW304L CF304L Selects the back focus setting type and performs fine adjustment. The following setting can be configured on the “BACK-FOCUS CW304L CF314L SETUP” screen displayed from the top screen. Refer to page 5 for how to call up the screen. The lens adjustment shall be performed before the back focus adjustment. -
Page 25: Special Menu Setting [Special Setup]
Special menu setting [SPECIAL SETUP] The special menu setup is performed including the setting of the camera image quality and the communication configuration when a receiver is used. The following settings are to be configured on the “SPECIAL SETUP” screen displayed from the top screen. Refer to page 5 for how to call up the screen. -
Page 26: Default Resetting [Camera Reset]
Step 1 Move the cursor to “PIX OFF” and press the [SET] button. → The “PIX OFF” screen appears. Step 2 Select a number (1 to 16) with which a pixel compensation point is registered and press the [SET] button. →... -
Page 27: Camera Language Selection [Language Setup]
Camera language selection [LANGUAGE SETUP] A language for the setup menu is selected from the following: The language selection can be made on the “LANGUAGE SETUP” screen displayed from the top screen. Refer to page 5 for how to call up the screen. “LANGUAGE SETUP”... -
Page 28: Shortcut Operation
Shortcut operation Use of a system controller with the “Camera function” button allows users to perform the shortcut settings with use of the numeric keypad and camera function button. The available shortcut operations with this unit are shown as follows. System controller operation Setting contents [9] + [0] + [Camera function]... - Page 29 Importer's name and address to follow EU rules: Panasonic Marketing Europe GmbH Winsbergring 15, 22525 Hamburg F.R.Germany Panasonic Testing Centre Panasonic Marketing Europe GmbH © Panasonic System Networks Co., Ltd. 2011 © Panasonic System Networks Co., Ltd. 2011 Winsbergring 15, 22525 Hamburg F.R.Germany sC1111-0 PGZC1027ZA ©...