hit counter code
Samsung SyncMaster 460DR-2 User Manual
  1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Monitor
  5. SyncMaster 460DR-2
  6. User manual
Samsung SyncMaster 460DR-2 User Manual

Samsung SyncMaster 460DR-2 User Manual

Hide thumbs Also See for SyncMaster 460DR-2:
Table of Contents

Advertisement

Quick Links

Download this manual
SyncMaster 460DR-2

LCD Display

User Manual

The color and the appearance may differ depending on the
product, and the specifications are subject to change
without prior notice to improve the performance.

Advertisement

Table of Contents
loading

Related Manuals for Samsung SyncMaster 460DR-2

Summary of Contents for Samsung SyncMaster 460DR-2

  • Page 1: Lcd Display

    SyncMaster 460DR-2 LCD Display User Manual The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance.

  • Page 2: Safety Instructions

    Safety Instructions Notational Note These safety instructions must be followed to ensure your safety and prevent property dam- age. Make sure to read the instructions carefully and use the product in the correct manner. Warning / Caution Failure to follow directions noted by this symbol could result in bodily harm or damage to the equipment.
  • Page 3 Safety Instructions • Wipe the monitor using a soft, slightly damp cloth that has been squeezed . Do not use a cleaning agent that contains alcohol or solvents, or that is surface active. Otherwise, the exterior may discolor or crack or the panel coating may come off.

  • Page 4: Installation

    Safety Instructions Do not forcefully bend or pull the power plug and do not place any heavy material on it. • Otherwise, this may result in fire. Do not connect multiple appliances to the same power outlet. • Otherwise, this may cause fire due to overheating. Do not disconnect the power cord while using the product.
  • Page 5 Safety Instructions • Otherwise, this may result in fire. Keep heating appliances as far away from the power cord or the product as possible. • Otherwise, this may result in electric shock or fire. Do not install it in a badly ventilated location such as a bookcase or closet.
  • Page 6 Safety Instructions If there is a strange smell or a strange sound or smoke is coming from the product, disconnect the power plug immediately and con- tact a Service Center. • Otherwise, this may result in electric shock or fire. Do not place this product in a location exposed to moisture, dust, smoke, water, or in a car.
  • Page 7 Safety Instructions When using a fixed screen for a long time, an afterimage or stain may occur. • If you are not using your product for a long period of time, put it into sleep mode or use a moving screen saver. Set a resolution and frequency appropriate to the product.
  • Page 8 Safety Instructions Be careful that children do not place the battery in their mouths when removed from the remote control. Place the battery in a lo- cation that children or infants cannot reach. • If children have had the battery in their mouths, consult your doctor immediately.
  • Page 9 Safety Instructions Be careful when adjusting the angle of the product or the height of the stand. • This may result in personal injury as your hand or fingers may become caught. • Also, if you tilt the product too far, it may fall and cause personal injury.

  • Page 10: Checking The Contents Of The Package

    Introduction Package Contents Checking the Contents of the Package Remove the lock from the package box, as shown in the figure above. Lift up the package box by Check the contents of the Remove the styrofoam holding the grooves on package.
  • Page 11 Introduction LCD Display Manuals Quick Setup Guide Warranty Card User Manual (Not available in some lo- cations) Cables Power Cord Others Remote Control Batteries (AAA X 2) (Not available in some lo- cations) Sold separately Wall Mount KIT RCA-Stereo Cable HDMI-DVI Cable D-Sub Cable RGB to Component Cable...

  • Page 12: Control Panel

    Introduction Sold separately DVI Cable RS232C Cable RCA Cable Network box Note Accessories that can be purchased with the product vary by country. Your LCD Display Control Panel MENU button [MENU] Opens the on-screen menu and exits from the menu. Also use to exit the OSD menu or return to the previous menu.
  • Page 13 Introduction Activates a highlighted menu item. SOURCE button [SOURCE] Switches from PC mode to Video mode. Selects the input source that an external device is connected to. [PC] → [DVI] → [AV] → [Component] → [HDMI1] → [HDMI2] → [Dis- playPort] D.MENU button Not available...
  • Page 14 Introduction POWER ON / OFF Switches the LCD Display On/Off. POWER The power cord plugs into the LCD Display and the wall outlet. RGB/COMPONENT IN (PC/COMPO- NENT Connection Terminal (Input)) • Connect the [RGB/COMPONENT IN] port on the monitor to the RGB port on the PC using the D-SUB cable.
  • Page 15 Up to HDMI 1.3 can be supported. Note To use MagicInfo, the network box specified separately by Samsung must be installed in- side the product and the MagicInfo output of the network box must be connected to the [HDMI IN 2 (MAGICINFO)] terminal.

  • Page 16: Remote Control

    Introduction Note Go to Multi Control and select RJ45 MDC as the MDC Connection. RS232C OUT/IN (RS232C Serial PORT) MDC(Multiple Display Control) Program Port Connect a serial cable (cross type) to [RS232C] on the product and RS232C on the PC. To use an MDC, the MDC program must be installed on the PC.
  • Page 17 Introduction SOURCE Number Buttons + VOL - CONTENT (HOME) MagicInfo Lite TOOLS Up-Down Left-Right / Enter buttons RETURN The Color button / The PC/DVI/HDMI/DP selection button MagicInfo ) / / / D.MENU MUTE MENU BLANK INFO EXIT LOCK Power on the product. Select a connected source device.
  • Page 18 Introduction Not available. TOOLS Up-Down Left-Right button : Move to the upper, lower, left Up-Down Left-Right / En- or right menu, or adjust an option's setting. ter buttons Enter button : Activates a highlighted menu item. Return to the previous menu. RETURN Manually select a connected input source from PC, DVI, The Color button / The...
  • Page 19 Introduction Dimensions Dimensions...

  • Page 20: Installing The Wall Mount Kit

    We recommend you contact a technician for assistance when installing the wall mount bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the wall mount on your own.

  • Page 21: Cable Connections

    Introduction • Samsung is not liable for product damage or per- sonal injury when a non-VESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions. • Do not mount the product at more than a 15 de- gree tilt.

  • Page 22: Control Codes

    Introduction Data Set Ready Request to Send Clear to Send Ring Indicator • RS232C cable Connector : 9-pin D-Sub Cable : Cross cable -P1- -P1- -P2- -P2- FEMALE ---------> FEMALE <--------- ---------- • Connecting method Control codes • Get control Header command DATA Length...
  • Page 23 Introduction 0xAA command Value type • commanding words command type command Value range Power control 0x11 Volume control 0x12 0~100 Input source control 0x14 Screen Mode control 0x18 Screen Size control 0x19 0~255 PIP on/off control 0x3C Auto adjustment control 0x3D Video wall Mode control 0x5C...
  • Page 24 Introduction 0xAA 0x11 Power Power : Power code to be set on TV or Monitor. 1 : Power ON 0 : Power OFF • com- DATA Header Ack/Nak r-CMD Val1 Check mand Length 0xAA 0xFF ‘A’ 0x11 Power Power : Same as above •...
  • Page 25 Introduction • com- DATA Header Ack/Nak r-CMD Val1 Check mand Length 0xAA 0xFF ‘N’ 0x12 ERR : Error code that shows what occurred error is. • Input Source Control • Function Personal Computer changes input source of TV or Monitor. •...
  • Page 26 Introduction In the case of TV, only possible with models include TV. • com- DATA Header Ack/Nak r-CMD Val1 mand Length Check Input 0xAA 0xFF ‘A’ 0x14 Source Input Source : Same as above • com- DATA Header Ack/Nak r-CMD Val1 Check mand...
  • Page 27 Introduction com- DATA Header Ack/Nak r-CMD Val1 mand Length Check Screen 0xAA 0xFF ‘A’ 0x18 Mode Screen Mode : Same as above • com- DATA Header Ack/Nak r-CMD Val1 Check mand Length 0xAA 0xFF ‘N’ 0x18 ERR : Error code that shows what occurred error is. •...
  • Page 28 Introduction • Get the PIP ON / OFF Status Header command DATA Length CheckSum 0xAA 0x3C • Set the PIP ON / OFF Header command DATA DATA Length CheckSum 0xAA 0x3C PIP : The PIP ON / OFF code to set for the TV or Monitor. 1 : PIP ON 0 : PIP OFF •...
  • Page 29 Introduction • com- DATA Header Ack/Nak r-CMD Val1 mand Length Check Auto Ad- 0xAA 0xFF ‘A’ 0x3D justment • com- DATA Header Ack/Nak r-CMD Val1 Check mand Length 0xAA 0xFF ‘N’ 0x3D ERR : Error code that shows what occurred error is. •...
  • Page 30 Introduction • com- DATA Header Ack/Nak r-CMD Val1 Check mand Length 0xAA 0xFF ‘N’ 0x5C ERR : Error code that shows what occurred error is. • Safety Lock • Function Personal Computer turns Safety Lock function of TV or Monitor ON / OFF. Can operate regardless of whether power is ON / OFF.

  • Page 31: Connecting A Computer

    Connections Connecting a Computer There are several ways to connect the computer to the monitor. Choose one from the following options. Using the D-sub (Analog) connector on the video card. • Connect the D-sub to the 15-pin, port on the [RGB/COMPONENT IN] back of your LCD Display and the 15 pin D-sub Port on the computer.

  • Page 32: Connecting To Other Devices

    Connect the power cord for your LCD Display to the Power port on the back of the LCD Display. Turn on the power switch. Note Contact a local SAMSUNG Electronics Service Center to buy optional items. Connecting to Other devices Note •...

  • Page 33: Connecting To A Camcorder

    Connections Connect a video cable to [AV IN] on the product and the video output port on the external device. Then, start the DVD, VCR or Camcorders with a DVD disc or tape inserted. Press SOURCE on the product or remote control and select "AV". Connecting to a Camcorder Locate the AV output jacks on the camcorder.

  • Page 34: Connecting Using A Hdmi Cable

    Connections Connecting Using a HDMI Cable Connect an HDMI cable to [HDMI IN 2 (MAGICINFO)] or [HDMI IN 1] on the product and the HDMI output port on a digital device. Press SOURCE on the product or remote control and select "HDMI1 / HDMI2"...

  • Page 35: Connecting A Dvd Player

    Connections Connecting a DVD Player Connect a RGB to Component cable between the [RGB/COMPONENT IN] port on the LCD Display and the P , Y, P jacks on the DVD player. Connect a set of audio cables between the [AV/COMPONENT AUDIO IN [R-AUDIO-L]] on the LCD Display and the AUDIO OUT jacks on the DVD player.

  • Page 36: Connecting To An Audio System

    Connect a set of audio cables between the AUX L, R jacks on the AUDIO SYSTEM and [AUDIO OUT] on LCD Display. Connecting a Network Box(sold separately) Note • Network boxes are sold separately. • For more information on how to purchase and install a network box, contact Samsung Electronics. Connecting the Power...

  • Page 37: Connecting To Magicinfo Out

    Connections Connect the [POWER] terminal of the product and the [POWER] terminal of the installed network box using a power extension cable. Connect the power cord to [POWER] on the network box and mains sock- et. Turn on the power switch. Connecting to MAGICINFO OUT Connect the MAGICINFO terminal on the network box to the HDMI IN2(MAGICINFO) terminal on the product using the MAGICINFO OUT-HDMI cable.

  • Page 38: Connecting A Usb Devices

    Connections Connecting a USB devices You can connect USB devices such as a mouse or keyboard.

  • Page 39: Using The Software

    Prepare a blank disk and download the driver program file at the Internet web site shown here. Internet web site : http://www.samsung.com/ Installing the Monitor Driver (Automatic) Insert CD into the CD-ROM drive. Click "Windows". Choose your monitor model in the model list, then click the "OK" button.

  • Page 40: Installing The Monitor Driver (Manual)

    Using the Software Note This monitor driver is certified by Microsoft, and installing it will not damage your system. The certified driver will be posted on Samsung Monitor homepage. http://www.samsung.com/ Installing the Monitor Driver (Manual) ® Microsoft Windows Vista™‚ Operating System Insert your Manual CD into your CD-ROM drive.
  • Page 41 This monitor driver is under certifying MS logo, and this installation will not damage your system. The certified driver will be posted on Samsung Monitor homepage. Click "Update Driver..." in the "Driver" tab. Check the "Browse my computer for driver software" checkbox and click "Let me pick from a list of device drivers on my computer".
  • Page 42 Using the Software Select the model that matches your monitor from the list of monitor models on the screen, and click "Next". 10. Click "Close" → "Close" → "OK" → "OK" on the following screens displayed in sequence. ® ® Microsoft Windows XP Operating System...
  • Page 43 Using the Software Insert CD into the CD-ROM drive. Click "Start" → "Control Panel", then click the "Appearance and Themes" icon. Click "Display" icon and choose the "Settings" tab then click "Advanced...". Click the "Properties" button on the "Monitor" tab and select "Driver" tab. Click "Update Driver..."...
  • Page 44 Then click "OK" button. Note This monitor driver is certified by Microsoft, and this installation will not damage your system. The certified driver will be posted on Samsung Monitor homepage. http://www.samsung.com/ Click the "Close" button, then click the "OK" button continually.
  • Page 45 Using the Software 10. Monitor driver installation is completed. ® ® Microsoft Windows 2000 Operating System When you can see "Digital Signature Not Found" on your monitor, follow these steps. Choose "OK" button on the "Insert disk" window. Click the "Browse" button on the "File Needed" window. Choose A:(D:\Driver), then click the "Open"...
  • Page 46 Using the Software If you can see the "Digital Signature Not Found" window, then click the "Yes" button. Then click the "Finish" button and the "Close" button. ® ® Microsoft Windows Millennium Operating System Click "Start", "Setting", "Control Panel". Double click the "Display" icon. Select the "Settings"...
  • Page 47 Using the Software Set a Keyboard for your computer. The next screen is for setting your monitor. First of all, set a horizontal frequency for your monitor. (You can enter the frequency directly.) Set a vertical frequency for your monitor. (You can enter the frequency directly.) Enter the model name of your monitor.
  • Page 48 Using the Software Uninstallation Select Settings > Control Panel on the Start menu and double-click Add/Delete Program. Select MDC Unified from the list and click Change/Remove. Note • MDC installation can be affected by the graphics card, mother board and network conditions.
  • Page 57 display. † † † † † † †...
  • Page 58 † †...
  • Page 59 Picture Mode Adjust the picture mode for the selected display device.
  • Page 60 HDMI Black Level Adjust the HDMI Black Level for the selected display device.
  • Page 69 † † † † Sat Sun † † Delete holidays. check the corresponding checkboxes and click this button.
  • Page 75 Rename...
  • Page 77 † †...

  • Page 80: Adjusting The Lcd Display

    Adjusting the LCD Display Input Available Modes • PC / DVI / DisplayPort • • Component • HDMI • MagicInfo Note • MagicInfo can only be enabled when a network box(sold separately) is connected. Source List Use to select PC, HDMI or other external input sources connected to the LCD Display. Use to select the screen of your choice.
  • Page 81 Adjusting the LCD Display Note • PIP turns off when the LCD Display is switched to an external source. • If you select in Size, Position and Transparency will not be activated. Turns the PIP Screen Off/On. • • Source Note PIP is disabled if the primary screen does not receive a signal.

  • Page 82: Edit Name

    Adjusting the LCD Display Changes the Size of the PIP window. Note Picture > Size will be changed to 16:9 when PIP is On. Position Changes the Position of the PIP window. Transparency Adjusts the Transparency of PIP windows. • High •...

  • Page 83: Source Autoswitch Settings

    Adjusting the LCD Display Note • The displayed devices differ depending on the external input mode. • When connecting a PC to the HDMI terminal, set Edit Name to PC. In other cases, set Edit Name to AV. However, since 640x480, 720p (1280x720), and 1080p (1920x1080) are common signals for AV and PC, make sure to set the Edit Name in accordance with the input signal.

  • Page 84: Primary Source Recovery

    Adjusting the LCD Display When the Primary Source selection is set to All, the display will search all the video source inputs twice in sequence looking for an active video source, returning back to the first video source in the sequence if no video is found. Primary Source Recovery When Primary Source Recovery is On, only the Primary Source and Secondary Source video source selection will be searched for active video.
  • Page 85 Adjusting the LCD Display Picture [PC / DVI / DisplayPort / MagicInfo Mode] Available Modes • PC / DVI / DisplayPort • • Component • HDMI • MagicInfo Note • MagicInfo can only be enabled when a network box(sold separately) is connected. Mode Note Not available when Dynamic Contrast is set to On.

  • Page 86: Color Tone

    Adjusting the LCD Display Adjusts the Contrast. Brightness Adjusts the Brightness. Sharpness Adjusts the Sharpness. Gamma Adjust the mid-range brightness (Gamma) for the picture. • Natural • Mode1 Sets the picture brighter than Natural. • Mode2 Sets the picture darker than Mode1. •...

  • Page 87: Color Control

    Adjusting the LCD Display Cool Normal Warm Custom Note If you set the Color Tone to Cool, Normal, Warm, or Custom, the Color Temp. function is disabled. If you set the Color Tone to Off, the Color Control function is disabled Color Control Adjusts individual Red, Green, Blue color balance.

  • Page 88: Auto Adjustment

    Adjusting the LCD Display Coarse Removes noise such as vertical stripes. Coarse adjustment may move the screen image area. You may relocate it to the center using the horizontal control menu. Fine Removes noise such as horizontal stripes. If the noise persists even after Fine tuning, repeat it after adjusting the frequency (clock speed).

  • Page 89: Signal Control

    Adjusting the LCD Display Selects either On or Off with the signal balance. Signal Control Note Available when Signal Balance is set to On. R-Gain G-Gain B-Gain R-Offset G-Offset B-Offset Size The Size can be switched. 16:9 PIP Picture Adjusts the PIP Screen Settings. Note •...

  • Page 90: Dynamic Contrast

    Adjusting the LCD Display Contrast Adjusts the Contrast of the PIP window on the screen. Brightness Adjusts the Brightness of the PIP window on the screen. Sharpness Adjusts the Sharpness of the PIP window on the screen. Color Adjusts the Color of the PIP window on the screen. Note PIP input only operates in DVI, AV, HDMI, or Component mode.

  • Page 91: Lamp Control

    Adjusting the LCD Display Lamp Control Adjusts the inverter lamp in order to reduce energy consumption. Note Not available when Dynamic Contrast is set to On. Brightness Sensor Brightness Sensor detects the surrounding light intensity and automatically optimizes the screen brightness accordingly. Picture Reset Reset the screen settings.
  • Page 92 Adjusting the LCD Display Mode The LCD Display has four automatic picture settings ("Dynamic", "Standard", "Movie" and "Custom") that are preset at the factory. Dynamic, Standard, Movie, or Custom can be activated. Note Not available when Dynamic Contrast is set to On. Dynamic Standard Movie...
  • Page 93 Adjusting the LCD Display Adjusts the picture Color. Tint Adds a natural tone to the display. Color Tone The color tones can be changed. The individual Color components are also user adjustable. Note Not available when Dynamic Contrast is set to On. Cool2 Cool1 Normal...

  • Page 94: Digital Nr (Digital Noise Reduction)

    Adjusting the LCD Display Size The Size can be switched. PC mode (PC, HDMI [PC Timing]) : 16:9 - 4:3 Video mode (HDMI [Video Timing], AV or Component): 16:9 - Zoom1 - Zoom2 - 4:3 - Screen Fit - Custom 16:9 - Sets the picture to 16:9 wide mode.

  • Page 95: Hdmi Black Level

    Adjusting the LCD Display Note Digital NR function is not available for all resolutions. HDMI Black Level If you use the product by connecting to a DVD player or set-top box with a DVI cable, the contrast and color may degrade and the picture may be darker. If this is the case, correct the degraded picture quality using HDMI Black Level.
  • Page 96 Adjusting the LCD Display Adjusts the Contrast of the PIP window on the screen. Brightness Adjusts the Brightness of the PIP window on the screen. Sharpness Adjusts the Sharpness of the PIP window on the screen. Dynamic Contrast Dynamic Contrast automatically detects the distribution of the visual signal and adjusts to create an optimum contrast.

  • Page 97: Available Modes

    Adjusting the LCD Display Brightness Sensor detects the surrounding light intensity and automatically optimizes the screen brightness accordingly. Picture Reset Reset the screen settings. Sound Available Modes • PC / DVI / DisplayPort • • Component • HDMI • MagicInfo Note •...

  • Page 98: Auto Volume

    Adjusting the LCD Display Selects Speech when watching a show that is mostly dialog (i.e., news). Custom Selects Custom if you want to adjust the settings according to your personal preferen- ces. Custom The sound settings can be adjusted to suit your personal preferences. Note •...

  • Page 99: Sound Select

    Adjusting the LCD Display SRS TS XT SRS TS XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround XT delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all multichannel formats.

  • Page 100: Sound Reset

    Adjusting the LCD Display External Sound is only output from the external speakers, and the volume can only be controlled for them as well. Sound Reset Reset the sound settings. Setup Available Modes • PC / DVI / DisplayPort • •...

  • Page 101: Clock Set

    Adjusting the LCD Display Clock Set Current Time Setting. Sleep Timer Turns the LCD Display off automatically at certain times. • • • • • • • Timer1 / Timer2 / Timer3 You can set the LCD display to automatically turn on or off at a specified time. Note •...

  • Page 102: Holiday Management

    Adjusting the LCD Display • The Manual option allows you to select a day of the week. • Source : Selects the external input source that will be displayed when the selected monitor is turned on. • Repeat : Available selections include Once, EveryDay, Mon~Fri, Mon~Sat, Sat~Sun, and Manual.

  • Page 103: Menu Transparency

    Adjusting the LCD Display You can delete all the registered holidays. Menu Transparency Change the transparency of the background of the OSD. High Medium Opaque Safety Lock Change PIN The password can be changed. The preset password for the LCD Display is "0000". Note If you forgot your password, press the remote buttons INFO →...

  • Page 104: Energy Saving

    Adjusting the LCD Display Lock This is the function that locks the OSD in order to keep the current settings or to prevent others from adjusting the settings. Note Selecting Lock On will enable Lock Off. To disable the Lock function, enter the password for Lock Off.
  • Page 105 Adjusting the LCD Display Turns Off / On the Video Wall function of the selected display Off / On. • • Format The Format can be selected to see a divided screen. • Full Provides a full screen without any margins. •...

  • Page 106: Screen Position

    Adjusting the LCD Display Note If Horizontal is set to 15, the maximum value for Vertical is 6. Screen Position The screen can be divided into several images. A number of screens can be selected with a different layout when dividing. •...
  • Page 107 Adjusting the LCD Display Horizontal Sets how many pixels the screen moves horizontally. Five adjustment levels: 0, 1, 2, 3, and 4. Vertical Sets how many pixels the screen moves vertically. Five adjustment levels: 0, 1, 2, 3, and 4. Time Set the time interval for performing the horizontal or vertical movement, respectively.
  • Page 108 Adjusting the LCD Display • • Mode You can change the Safety Screen Type. • • Eraser • Pixel Period Use this function to set the execution period for each mode set in the timer. Time Within the set period of time specify a time for execution. •...

  • Page 109: Side Gray

    Adjusting the LCD Display This function prevents after-images on the screen by moving long black and white vertical lines. Eraser This function prevents after-images on the screen by moving a rectangular pattern. Pixel This function prevents after-images by moving many pixels on the screen. Side Gray Select the brightness of the grey for the screen background.

  • Page 110: Power On Adjustment

    Adjusting the LCD Display When the picture is not displayed properly on the screen when setting the graphics card resolution of the computer to 1024 x 768 @ 60Hz, 1280 x 768 @ 60Hz, 1360 x 768@ 60Hz or 1366 x 768 @ 60Hz, by using this function(Resolution Select), you can have the picture displayed on the screen in the specified resolution.

  • Page 111: Advanced Settings

    Adjusting the LCD Display Advanced Settings Configures the settings more elaborately. Fan & Temperature Protects the product by detecting the fan speed and internal temperature. Fan Control Selects auto or manual for the fan speed settings. • Auto • Manual Fan Speed Setting Sets the fan speed within a range of 0 and 100.

  • Page 112: Current Temperature

    Adjusting the LCD Display Note • The picture will be dimmed if the temperature exceeds the specified temperature, and the product will automatically power off to prevent overheating if the temperature keeps rising. • It is best to use the product at temperatures 75 - 80 °C (based on ambient temperature of 40 °C).

  • Page 113: User Auto Color

    Adjusting the LCD Display Locks or unlocks the monitor control buttons on the product. • • User Auto Color Auto Color Automatically adjusts the colors. Reset Resets the color settings. Note Enabled only in PC mode. Standby Control Sets the standby mode, which will be activated when no input signal is detected. •...

  • Page 114: Lamp Schedule

    Adjusting the LCD Display Note • Enabled only in PC, DVI, HDMI, or DisplayPort mode. • This function at <AUTO> doesnt work at HDMI source. Lamp Schedule Adjusts the luminance to a user-specified value at a specified time. OSD Display Displays or hides a menu item on the screen.

  • Page 115: No Signal Osd

    Adjusting the LCD Display No Signal OSD • • MDC OSD • • Software Upgrade Performs a software upgrade. Connect the product to a computer via a digital signal such as DVI or HDMI. Click the BMP image file converted from an SW code. The image below will appear on the screen of the product.

  • Page 116: Setup Reset

    Adjusting the LCD Display • A BMP image might not be extracted if it is covered by another image (for example, the mouse pointer). If a more recent version than the current software version is detected, you will be asked whether to upgrade the current software.
  • Page 117 Adjusting the LCD Display Note • MagicInfo can only be enabled when a network box(sold separately) is connected. Multi Control Assigns an individual ID to the SET. • ID Setup Assigns distinctive IDs to the SET. • ID Input Use to select the transmitter functions of the individual SET. Only a SET where the ID corresponds to the transmitter setting becomes activated.
  • Page 118 Adjusting the LCD Display Note • MagicInfo can only be enabled when a network box(sold separately) is connected. Note • The remote control can be used to select MagicInfo. However, it is recommended to use a separate USB keyboard to utilize MagicInfo fully. •...
  • Page 119 Adjusting the LCD Display You can select an Application to be executed in your computer when Windows starts. 2. Select TCP/IP - step 2 In step 2 of MagicInfo Setup Wizard, you don’t have to go to Network Setting on the desktop to make your settings for TCP/IP.
  • Page 120 Adjusting the LCD Display When using multiple languages, you can choose and set a specific language among them. Note English is set as the default language. You do not need to select a language if you will be using English as the menu display language. 4.
  • Page 121 Adjusting the LCD Display Shows the settings that have been selected by the user. Note If the MagicInfo icon is not displayed on the notification area, double click the MagicInfo icon on the window desktop. The icon will appear.

  • Page 122: Troubleshooting

    Troubleshooting Self-Test Feature Check Note Check the following items yourself before calling for assistance. Contact a Service Center for problems that you cannot solve by yourself. Self-Test Feature Check Turn off both your computer and the LCD Display. Unplug the video cable from the back of the computer. Turn on the LCD Display.

  • Page 123: Symptoms And Recommended Actions

    Troubleshooting • Do not use benzene, thinner or other flammable sub- stances. 2) Maintaining the Flat Panel Display Screen. Clean with a soft cloth (cotton flannel). • Never use acetone, benzene or thinner. (They may cause flaws or deformation of the screen surface.) •...

  • Page 124: Problems Related To The Screen

    Troubleshooting Check if the signal cable between the computer and the LCD Display is securely con- nected. (Refer to Connecting a Computer) Problems related to the Screen Note Problems related to the LCD Display screen and their solutions are listed. The screen is blank and the power indicator is off.

  • Page 125: Problems Related To Audio

    Troubleshooting The screen color is inconsistent. Adjust color using Custom under OSD Color Adjustment menu. The color image is distorted by dark shadows. Adjust color using Custom under OSD Color Adjustment menu. The color white is poor. Adjust color using Custom under OSD Color Adjustment menu. The Power Indicator blinks.
  • Page 126 Troubleshooting Check if a special fluorescent or neon lamp is on in the vicinity. Q & A How can I change the frequency? The frequency can be changed by reconfiguring the video card. Note That video card support can vary, depending on the version of the driver used. (Refer to the computer or the video card manual for details.) How can I adjust the resolution? Windows XP:...
  • Page 127 Troubleshooting Control Panel → Appearance and Personalization → Personalize → Screen Saver Settings. Set the function in the BIOS-SETUP of the computer. (Refer to the Windows / Computer Manual). How can I clean the outer case/LCD Panel? Disconnect the power cord and then clean the LCD Display with a soft cloth, using either a cleaning solution or plain water.

  • Page 128: Specifications

    Specifications General General Model Name 460DR-2 LCD Panel Size 46.0 inch (116 cm) Display area 1018.08 mm (H) x 572.67 mm (V) Pixel Pitch 0.53025 mm (H) x 0.53025 mm (V) Synchronization Horizontal 30~81kHz Vertical 56~85Hz Display Color 16.7 M Resolution Optimum resolution 1920 x 1080 @ 60 Hz...

  • Page 129: Environmental Considerations

    Design and specifications are subject to change without prior notice. • Attaching a Samsung ID (videowall kit) will increase the weight of an LFD by 1.6 kg. • Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may appear brighter or darker on the panel.

  • Page 130: Normal Operation

    Specifications PowerSaver State Normal Op- Power sav- Power off Power off eration ing mode (Power But- (Power ton) Swich) Power Indicator Green blink- Amber Power Con- Rating 380 Watts less than 1 less than 1 sumption Typical 354 Watts (Without Network) Note •...
  • Page 131 Specifications Display Mode Horizontal Vertical Fre- Pixel Clock Sync Polarity Frequency quency (Hz) (MHz) (H/V) (kHz) VESA, 1152 x 864 67.500 75.000 108.000 VESA, 1280 x 768 47.776 59.870 79.500 VESA, 1280 x 960 60.000 60.000 108.000 VESA, 1280 x 1024 63.981 60.020 108.000...

  • Page 132: For A Better Display

    Information For a Better Display Adjust the computer resolution and screen injection rate (refresh rate) on the computer as described below to enjoy the best picture quality. You can have an uneven picture quality on screen if the best picture quality is not provided for TFT- LCD.
  • Page 133 Information Power Off, Screen Saver, or Power Save Mode • Turn the power off for 2 hours after 12 hours in use • Set the Monitor to power off with the PC Display Properties Power Scheme. • Use a Screen saver if possible - Screen saver in one color or a moving image is recommended.
  • Page 134 Information Change the characters color periodically • Use Bright colors with little difference in luminance. - Cycle : Change the characters color and background color every 30 minutes • Every 30 minutes, change the characters with movement. • Have the images and logo cycle periodically. - Cycle: Display moving image together with Logo for 60 seconds after 4 hours in use.
  • Page 135 Information • Apply the Screen Erasing function - Symptom: 2 Vertical blocks move while erasing the display...
  • Page 136 Appendix Contact SAMSUNG WORLD WIDE Note If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care Center. North America U.S.A 1-800-SAMSUNG (726-7864) http://www.samsung.com CANADA 1-800-SAMSUNG (726-7864) http://www.samsung.com/ca (English) http://www.samsung.com/ ca_fr (French) MEXICO 01-800-SAMSUNG http://www.samsung.com...
  • Page 137 0-800-777-08 http://www.samsung.com PUERTO RICO 1-800-682-3180 http://www.samsung.com TRINIDAD & TO- 1-800-SAMSUNG (726-7864) http://www.samsung.com BAGO VENEZUELA 0-800-100-5303 http://www.samsung.com Europe AUSTRIA 0810 - SAMSUNG (7267864, http://www.samsung.com € 0.07/min) BELGIUM 02-201-24-18 http://www.samsung.com/be (Dutch) http://www.samsung.com/ be_fr (French) BOSNIA 05 133 1999 http://www.samsung.com BULGARIA 07001 33 11 , normal tariff http://www.samsung.com...
  • Page 138 TOLL FREE No. SERBIA 0700 SAMSUNG (0700 726 http://www.samsung.com 7864) SLOVAKIA 0800 - SAMSUNG (0800-726 http://www.samsung.com 786) SPAIN 902 - 1 - SAMSUNG (902 172 http://www.samsung.com 678) SWEDEN 0771 726 7864 (SAMSUNG) http://www.samsung.com SWITZERLAND 0848-SAMSUNG (7267864, http://www.samsung.com/ch CHF 0.08/min) (German) http://www.samsung.com/...
  • Page 139 1800 3000 8282 1800 266 8282 INDONESIA 0800-112-8888 http://www.samsung.com 021-5699-7777 JAPAN 0120-327-527 http://www.samsung.com MALAYSIA 1800-88-9999 http://www.samsung.com NEW ZEALAND 0800 SAMSUNG (0800 726 http://www.samsung.com 786) PHILIPPINES 1-800-10-SAMSUNG http://www.samsung.com (726-7864) for PLDT 1-800-3-SAMSUNG (726-7864) for Digitel 1-800-8-SAMSUNG (726-7864) for Globe 02-5805777 SINGAPORE 1800-SAMSUNG (726-7864) http://www.samsung.com...
  • Page 140 8000 0077 http://www.samsung.com GHANA 0800-10077 http://www.samsung.com 0302-200077 KENYA 0800 724 000 http://www.samsung.com NAMIBIA 8197267864 http://www.samsung.com NIGERIA 0800-726-7864 http://www.samsung.com SENEGAL 800-00-0077 http://www.samsung.com SOUTH AFRICA 0860-SAMSUNG (726-7864) http://www.samsung.com TANZANIA 0685 88 99 00 http://www.samsung.com UGANDA 0800 300 300 http://www.samsung.com ZAMBIA 211350370 http://www.samsung.com...

  • Page 141: Responsibility For The Pay Service (Cost To Customers)

    If a product damage is caused by; • external impact or drop. • use of supplies or separatly sold product unspecified by Samsung. • repair from a person besides an engineer of outsourcing service company or partner of Samsung Electronics Co., Ltd.

  • Page 142: Correct Disposal

    Appendix Note If customer requests a service in case the product has no defect, service fee may be charged. So please read User Manual first. Terms Dot Pitch The image on a monitor is composed of red, green and blue dots.
  • Page 143 Reproduction in any manner whatsoever without the written permission of Samsung Elec- tronics Co., Ltd. is strictly forbidden. Samsung Electronics Co., Ltd. shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this ma- terial.

Table of Contents