Dear Customer, Please read this user information carefully. Above all, please take note of the “Safety” section on the first few pages. Please keep this user information for later reference. Pass it on to any subsequent owner of the appliance. The warning triangle and/or specific words (Warning!, Caution!, Important!) are used to highlight instructions that are important for your safety or for the function of the appliance.
Improper repairs can cause injury or significant mal- function. If your appliance needs repairing, please contact your local AEG Service Force Centre. • If your appliance malfunctions, or fractures, cracks or splits appear: – switch off all cooking zones, –...
Operating Instructions Safety When Cleaning • For safety reasons do not clean the appliance with a steam jet or high pressure cleaner. • Clean the hob in accordance with the maintenance and cleaning instructions in this manual. How to Avoid Damage to Your Appliance •...
Operating Instructions Disposal Disposing of Packaging Materials • All packaging can be recycled, sheet and hard foam parts are appro- priately marked. Please dispose of packaging material and any old appliance with due regard to safety and the environment. Information on disposal •...
Operating Instructions Before Using for the First Time Initial Cleaning Wipe the ceramic glass cooking surface with a damp cloth to remove any traces left from manufacturing. Important: Do not use any caustic, abrasive cleaners! The surface could be damaged. Using the Cooking Zones When the cooking zones are switched on, they may hum briefly.
Operating Instructions Switching on the Double Ring Cooking Zone Depending on the pot or pan size, in the case of double ring cooking zones it is possible to switch with the corresponding touch switch on the ceramic hob to the smaller cooking zone of the larger ring. 1.
Operating Instructions Residual Heat Indicator An indicator is assigned to each cooking zone. This illuminates as soon as the corresponding cooking zone becomes hot and warns against inadvertent touching. Important! As long as the residual heat indicator is illuminated, there is a risk of burns.
Operating Instructions Usage, Tips Pans The better the pan, the better the results. • You can recognise good pans by their bases. The base should be thick and as flat as possible. • Pans with aluminium or copper bases can leave metal discoloration on the glass ceramic surface that is very difficult or impossible to remove.
Operating Instructions Cleaning and Care Ceramic Glass Important: Cleaners must not come into contact with the ceramic glass when hot! All cleaners must be removed with plenty of clean water after cleaning as they may have a caustic effect when the rings are next heated! Do not use any aggressive cleaners, such as e.g.
Operating Instructions Burnt on Soilage 1. Remove burnt on sugar, melted plastic, aluminium foil or other melted materials immediately, while the hob is still hot, using a glass scraper. Important: When using the glass scraper on the hot cooking zone, there is a risk of burns! 2.
Warning: Repairs to the appliance may only be carried out by approved service engineers. Improper repairs can cause injury or serious mal- function. If your appliance needs repairing, please contact your local AEG Service Force Centre.
Installation Instructions INSTALLATION INSTRUCTIONS Important! This appliance must be installed by qualified personnel, according to the manufacturer’s instructions and to the relevant coun- try standards. Please observe this instruction, otherwise the warranty will not cover any damage that may occur. Technical Data Appliance Dimensions Width...
Installation Instructions Regulations, Standards, Directives This appliance meets the following standards: • EN 60 335-1 and EN 60 335-2-6 in respect of the safety of electrical appliances for household use and similar purposes and • DIN 44546 / 44547 / 44548 in respect of properties of electric cookers for the household.
Installation Instructions Safety Instructions for the Installer • This hob must be installed by qualified personnel, according to the manufacturer’s instructions and to the relevant country standards. • In respect of fire protection, this appliance corresponds to type Y (IEC 335-2-6).
Service SERVICE In the “What to do, if …” section a number of malfunctions are listed that you can rectify yourself. In the event of a malfunction, look there first. Is it a technical malfunction? Then please contact your customer service centre. (You will find addres- ses and telephone numbers in the "Customer Service Centres"...