2 electrolux Electrolux. Thinking of you. Share more of our thinking at www.electrolux.com Contents Safety information Care and cleaning Product description What to do if... Control panel Technical data First use Consumption values Personalisation Installation Daily use Electrical connection Helpful hints and tips...
Page 3
3 Installation • Never pull the power supply cable to re- move the plug from the socket; always • This appliance is heavy. Care should be take hold of the plug itself. taken when moving it. • Never use the appliance if the power sup- •...
4 electrolux Product description Your new appliance meets all modern requirements for effective treatment of laundry with low water, energy and detergent consumption. Its new washing system allows total use of detergent and reduces water consumption so saving energy. Detergent dispenser drawer...
5 Control panel Below is a picture of the control panel. It shows the programme selector dial as well as the buttons, pilot light and the display. These are presented by relevant numbers on the following pages. 9 10...
Page 6
6 electrolux Start/Pause • light on: the door cannot be opened. The machine in working or has stopped with This button allows you to start or to interrupt water left in the tub. the selected programme. • light off: the door can be opened. The pro-...
7 7.4: Soil degree icons • Light/Quick When selecting a programme on the display • Super Quick appears an icon indicating the degree of soil- 7.5: Child safety lock ing automatically proposed by the machine: This device permits you to leave the appli- •...
Page 8
8 electrolux Measure out the detergent and the fab- the programme you have chosen. You can change these values by operating the corre- ric softener Pull out the dispenser drawer until it stops. sponding buttons. The green pilot light of the Measure out the amount of detergent re- button 8 starts to flash.
Page 9
9 Select the Delay Start by pressing of the button 8 blinks for 3 times the message button 6 Err is displayed for a few seconds. Before you start the programme, if you wish Select the Time Manager option by...
10 electrolux nutes the door can be opened (pay atten- Fabric Soil Level tion to the water level and tempera- 30°C ture!) . After closing the door, it is necessary to se- Cold lect the programme and options again and to Altering an option or a running press button 8 .
Page 11
11 Before loading the laundry acid; treat any residual marks on white fab- rics with bleach and then rinse thoroughly. Never wash whites and coloureds together. Tar stains: first treat with stain remover, me- Whites may lose their «whiteness» in the thylated spirits or benzine, then rub with de- wash.
12 electrolux Degrees of water hardness ness degree is medium or high we suggest you to add a water softener following always Water hardness is classified in so-called “de- the manufacturer’s instructions. When the grees” of hardness. Information on hardness...
Page 13
13 Programme Maximum and Minimum Temperature Cycle Description Detergent Com- Options Maximum Spin Speed partment Maximum Fabrics Load Type of Laundry SYNTHETICS + PREWASH SPIN 60° - Cold NIGHT CYCLE Prewash - Main wash - Rinses RINSE HOLD Maximum spin speed 900 rpm...
14 electrolux Programme Maximum and Minimum Temperature Cycle Description Detergent Com- Options Maximum Spin Speed partment Maximum Fabrics Load Type of Laundry RINSES SPIN Rinses NIGHT CYCLE Maximum spin speed 1400 rpm RINSE HOLD Max. load 8 kg EASY IRON...
Page 15
15 External cleaning 4. Put the conditioner insert in as far as it will go, so that it is firmly in place Clean the exterior cabinet of the appliance 5. Clean all parts of the machine, especially with soap and water only, and then dry thor- the nozzles in the top of the washing-in oughly.
Page 16
16 electrolux Drain pump The pump should be inspected regularly and 6. When no more water comes out, un- particularly if: screw the pump and remove it. Always • the machine does not empty and/or spin keep a rag nearby to dry up spillage of •...
Page 17
17 Warning! Emergency emptying out When the appliance is in use and depending If the water is not discharged, proceed as on the programme selected there can be hot follows to empty out the machine: water in the pump. Never remove the pump 1.
18 electrolux 5. When you intend to start the machine up ature is above 0°C. again, make sure that the room temper- What to do if... Certain problems are due to lack of simple • : problem with the water supply.
Page 19
19 Problem Possible cause/Solution Too much detergent or unsuitable detergent (creates too much foam) has been used. • Reduce the detergent quantity or use another one. Check whether there are any leaks from one of the inlet hose fittings.
20 electrolux the Service Centre will require this informa- tion. Mod..Prod. No..Ser. No..Technical data Dimensions Width 60 cm Height 85 cm Depth 63 cm Electrical connection Information on the electrical connection is given on the rating plate, Voltage - Overall power - Fuse on the inner edge of the appliance door.
21 Installation Unpacking All transit bolts and packing must be re- moved before using the appliance. You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again.
Page 22
22 electrolux Caution! Never place cardboard, wood or similar materials under the machine to compensate for any unevenness in the floor. 6. Fill the smaller upper hole and the two large ones with the corresponding plastic Water inlet plug caps supplied in the bag containing the instruction booklet.
Page 23
23 machine. In this case, make sure the end cannot come unhooked when the ma- chine is emptying. This could be done by tying it to the tap with a piece of string or attaching it to the wall.
24 electrolux Electrical connection Information on the electrical connection is injury through failure to comply with given on the rating plate on the inner edge of the above safety precaution. the appliance door. The power supply cable must be Check that your domestic electrical installa-...