Nokia A032 Quick Manual
Using as wireless bridge and repeater
Hide thumbs
Also See for A032:
- User manual (218 pages) ,
- Safety information manual (76 pages) ,
- Manual (46 pages)
Related Manuals for Nokia A032
Summary of Contents for Nokia A032
- Page 1 USING THE NOKIA A032 AS WIRELESS BRIDGE AND REPEATER QUICK GUIDE © Nokia Networks | Filename: A032QG_AP_as_wireless_bridge.doc | Date: 18.08.00 INTERNET...
-
Page 2: Table Of Contents
Nokia operates a policy of continuous development. Therefore we reserve the right to make changes and improvements to any of the products described in this document without prior notice. Under no circumstances shall Nokia be responsible for any loss of data, or income or any direct, special, incidental, consequential or indirect damages howsoever caused. -
Page 3: Introduction
Having established the connection map, it is now necessary to determine the MAC address of the radio in each Nokia A032. This information can be obtained by using the serial port / telnet interface to the Nokia A032 or by using the diagnostics screen of the web interface. - Page 4 In the map of the plan (Figure 1), the MAC address of each access point has been written on the left-hand side of the paper. This information will be required during set-up. © Nokia Networks | Filename: A032QG_AP_as_wireless_bridge.doc | Date: 18.08.00 | Author: P Barnes INTERNET...
-
Page 5: Setting Up The Nokia A032S
Each Nokia A032 must be separately programmed to identify its bridge partner(s). This can only be done using the serial port / Telnet interface. Power up the Nokia A032 and log into the serial port / Telnet interface program. The information is entered using the bridge command, which has the format:... -
Page 6: Restarting The Nokia A032S
If one or more of the Nokia A032s are restarted, this information will be temporarily lost. This may result in loss of communication in the network for up to 5 minutes until the information is re-learned from the network.