Hitachi CP-X9110 User Manual
Hide thumbs
Also See for CP-X9110:
- User manual (129 pages) ,
- Network manual (109 pages) ,
- Quick setup manual (16 pages)
Table of Contents
Advertisement
Quick Links
Projector
CP-X9110/CP-WX9210/CP-WU9410
User's Manual (detailed)
Operating Guide – Technical
Example of computer signal
Resolution (H x V) H. frequency (kHz) V. frequency (Hz)
720 x 400
640 x 480
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
832 x 624
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1280 x 768
1280 x 800
1280 x 960
1280 x 1024
1280 x 1024
1440 x 900
(continued on next page)
37.9
31.5
37.9
37.5
43.3
35.2
37.9
48.1
46.9
53.7
49.7
48.4
56.5
60.0
68.7
67.5
47.7
49.7
60.0
64.0
80.0
55.9
Rating
85.0
VESA
59.9
VESA
72.8
VESA
75.0
VESA
85.0
VESA
56.3
VESA
60.3
VESA
72.2
VESA
75.0
VESA
85.1
VESA
74.5
60.0
VESA
70.1
VESA
75.0
VESA
85.0
VESA
75.0
VESA
60.0
VESA
60.0
VESA
60.0
VESA
60.0
VESA
75.0
VESA
59.9
VESA
Signal mode
TEXT
VGA (60Hz)
VGA (72Hz)
VGA (75Hz)
VGA (85Hz)
SVGA (56Hz)
SVGA (60Hz)
SVGA (72Hz)
SVGA (75Hz)
SVGA (85Hz)
Mac 16" mode
XGA (60Hz)
XGA (70Hz)
XGA (75Hz)
XGA (85Hz)
1152 x 864 (75Hz)
W-XGA (60Hz)
1280 x 800 (60Hz)
1280 x 960 (60Hz)
SXGA (60Hz)
SXGA (75Hz)
WXGA+ (60Hz)
1
Advertisement
Table of Contents
Related Manuals for Hitachi CP-X9110
Summary of Contents for Hitachi CP-X9110
- Page 1 Projector CP-X9110/CP-WX9210/CP-WU9410 User's Manual (detailed) Operating Guide – Technical Example of computer signal Resolution (H x V) H. frequency (kHz) V. frequency (Hz) Rating Signal mode 720 x 400 37.9 85.0 VESA TEXT 640 x 480 31.5 59.9 VESA VGA (60Hz) 640 x 480 37.9...
- Page 2 VESA Reduced Blanking *1) Supported except for HDMI input. *2) Only for CP-X9110. *3) Only for CP-WX9210 and CP-WU9410. *4) Only for CP-WU9410, but except for HDMI input. NOTE • Be sure to check jack type, signal level, timing and resolution before connecting this projector to a computer.
-
Page 3: Monitor Out
Connection to the ports Connection to the ports NOTICE ►Use the cables with straight plugs, not L-shaped ones, as the input ports of the projector are recessed. ►Only the signal that is input from the COMPUTER IN1 or IN2 can be output from the MONITOR OUT port. - Page 4 Connection to the ports (continued) COMPUTER IN2 R/Cr/Pr, G/Y, B/Cb/Pb, BNC jack x5 <Computer signal> • Video signal: RGB separate, Analog, 0.7Vp-p, 75Ω terminated (positive) • H/V. sync. signal: TTL level (positive/negative) • Composite sync. signal: TTL level <Component video signal> •...
- Page 5 Connection to the ports (continued) DVI-D DVI-D jack (digital to digital) Signal Signal Signal T.M.D.S. Data2 - T.M.D.S. Data1 - 17 T.M.D.S. Data0 - T.M.D.S. Data2 + 10 T.M.D.S. Data1 + 18 T.M.D.S. Data0 + T.M.D.S. Data2/4 Shield 11 T.M.D.S. Data1/3 Shield 19 T.M.D.S.
- Page 6 Connection to the ports (continued) CONTROL D-sub 9pin plug * About the details of RS-232C communication, please refer to the next section. Signal Signal Signal (No connection) (No connection) Ground (No connection) (No connection)
- Page 7 Connection to the ports (continued) HDBaseT RJ-45 jack Signal Signal Signal HDBaseT0+ HDBaseT2+ HDBaseT3+ HDBaseT0- HDBaseT2- HDBaseT3- HDBaseT1+ HDBaseT1- RJ-45 jack Signal Signal Signal...
- Page 8 Connection to the ports (continued) WIRELESS PORT Only for USB wireless adapter. Signal - Data + Data Ground REMOTE CONTROL Ø3.5 stereo mini jack...
-
Page 9: Connecting With Your Devices
4 Connecting with your devices Before connecting the projector to a device, consult the manual of the device to confi rm that the device is suitable for connecting with this projector and prepare the required accessories, such as a cable in accord with the signal of the device. Consult your dealer when the required accessory did not come with the product or the accessory is damaged. -
Page 10: Fastening The Cables
5 Fastening the cables Use the supplied cable tie to fasten the cables. Cable tie 6 Fastening the adapter cover USB wireless adapter: USB-WL-11N Temperature range: 0 ~ 45 °C (Operating) Loosen the screw (marked with triangle) on the bottom left of the WIRELESS port. -
Page 11: Connecting To A Power Supply
7 Connecting to a power supply Insert the connector of the power cord into the AC (AC inlet) of the projector. Firmly plug the power cord’s plug into the outlet. In a couple of seconds after the power supply connection, the POWER indicator will light up in steady orange.