hit counter code
Panasonic WJ-SX150 Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Matrix Switcher
  5. WJSX150 - SWITCHER - ADDENDUM
  6. Operating instructions manual

Panasonic WJ-SX150 Operating Instructions Manual

Matrix switcher
Hide thumbs Also See for WJ-SX150:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Operating Instructions Manual
O PE RA
TE
OP ER AT
E LE D W
IF CO OL
ILL BL IN
IN G FA N
K
MA LF UN
CT IO NS
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.

Matrix Switcher

Operating Instructions
WJ-SX150
Model No.
1 5 0
M a tr ix S
w itc h e r
W J- S X

Advertisement

Table of Contents
loading

Related Manuals for Panasonic WJ-SX150

Summary of Contents for Panasonic WJ-SX150

  • Page 1: Matrix Switcher

    Matrix Switcher Operating Instructions WJ-SX150 Model No. O PE RA OP ER AT E LE D W IF CO OL ILL BL IN IN G FA N MA LF UN CT IO NS 1 5 0 M a tr ix S...
  • Page 2 REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. If you lose the fuse cover the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from your local Panasonic Dealer. The lightning flash with arrowhead symbol,...

  • Page 3: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not use near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

  • Page 4: Table Of Contents

    CAMERA FUNCTION CONTROL ........78 SETUP PROCEDURES ...........42 Camera Setup ............78 Setup Procedures ..........42 Camera Function (Shortcut Function) ....78 Description of Setup Procedures ......42 Changing to Black and White Images ....79 Patrol Learn and Play ..........79 WJ-SX150 SETUP MENU (OSD) ........44...
  • Page 5 PS·Data system controller ......99 MONITOR DISPLAY WHEN A CABLE LOSS OCCURS ......100 Video Loss Display ..........100 TROUBLESHOOTING ...........101 APPENDIX ..............105 COMMUNICATION PROTOCOL ........106 Command Table ...........107 Error Code List .............115 WJ-SX150 WORKSHEETS ..........116 Instruction ............116 Team Work ............116 Checklist ..............117 SPECIFICATIONS ............124...

  • Page 6: Preface

    PREFACE Matrix Switcher System WJ-SX150 is designed for a surveillance control system, which is composed of 16 cameras, 4 monitors and 4 system controllers. System controllers are used to operate the surveillance control system. In combination with Digital Disk Recorder WJ-HD500 Series, a surveillance system can be established in a local area.

  • Page 7: Precautions

    System controller: Panasonic System Controller WV-CU360C Recorder: Panasonic Digital Disk Recorder WJ-HD500 Series Receiver: Panasonic Indoor Receiver WV-RC100 or Outdoor Receiver WV-RC150 Note : Text with this appearance is a special instruction, rule, or side comment related to the topic.

  • Page 8: Features Of The Matrix Switcher System

    FEATURES OF THE MATRIX SWITCHER SYSTEM...

  • Page 9: Matrix Switcher System Descriptions

    MATRIX SWITCHER SYSTEM DESCRIPTIONS Matrix Switcher System WJ-SX150 is a surveillance control system, which is composed of cameras, recorders, and this unit (the matrix switcher). This system has various functions for surveillance control. The following are the descriptions about the functions.

  • Page 10: System Control

    This matrix switcher system has four data ports: DATA 1 to 4. The ports DATA 1 to 3 supports the terminal mode, and the DATA 4 port supports both the terminal mode and Panasonic Security Data (PS·Data) Systems. These are the operation mode of the matrix switcher.

  • Page 11: Example Of A System With Basic Functions

    Signal type Function Control signal Controls camera functions (pan/tilt, zooming, focusing, lens iris, preset position) and camera site accessories. Status signal Shows camera status. Timing pulse (VD2) This signal is supplied to the unit to each camera. Each figure shows the picture status with or without the timing pulse. VD2 OFF VD2 ON Example of a SYSTEM with Basic Functions...
  • Page 12 Monitor 2 displays Camera 6's image consistently in the spot mode. Operators will observe the parking lot by looking at these images on a monitor in a management office. Receiver Camera 1 Camera 5 Camera 4 Preset position 1 Aux 1 Preset position 2 Sensor...

  • Page 13: Terminal Mode Descriptions

    TERMINAL MODE DESCRIPTIONS In the terminal mode, each external device (such as a cam- ation conflict. era, monitor, system controller, or a recorder, etc.) has the name and number (Camera 1, etc.). When you control a device, you are to select the device number and execute the Level Setting selection.

  • Page 14: Monitor-Related Functions

    Monitor-related Functions ALM SUSPENDED (the alarm is suspended) The following functions related to monitors are configurable. Note: When pressing the associated numeric button (1 to 5) while holding down the OSD button, information is turned on or off. 08/21/2001 6:50:08 PM Clock The Display Position The display position of the information is adjustable with the...

  • Page 15: Camera-Related Functions

    In each step, the desired preset position of a camera can Focus be called and displayed. This setting adjusts the lens focus. Tour sequences are configurable in SETUP MENU and An auto-focus camera can automatically adjust the focus. SX150 Admin Console. Zoom Group Sequence This setting adjusts the lens zoom rate.

  • Page 16: Alarm-Related Functions

    External Equipment Control Notes: • The images cannot be displayed while cleaning the When the camera is connected via a receiver, the external camera. Use this function when continuous surveillance equipment connected to the receiver can be controlled. is not necessary, such as after-hours time. •...

  • Page 17: Timer Event

    Sequence Mode Video Loss History Table In the sequence mode, the unit displays the initial alarm While the unit's power is ON, the video signal loss from a image on the monitor until the dwell time ends, even when camera or a recorder can occur by cable disconnection, another alarm input is accepted.

  • Page 18: System Status Table

    • SX150 Admin Console with the PC The setup utility can configure all the functions of the unit. Refer to p. 44 WJ-SX150 SETUP MENU (OSD) and p. 51 SX150 ADMIN CONSOLE for details. • The search for the recorded image (the search by the camera ID, or the recorded time and date) •...

  • Page 19: Notification About Ps·data Controller Operation

    NOTIFICATION ABOUT PS·DATA CONTROLLER OPERATION In the factory default setting, you can control the unit, if you connect a PS·Data system controller to the DATA 4 port. For exam- ple, if you connect a PS·Data unit supporting network connections (refer to p. 39), remote-control of the unit and the PS·Data units will be available with a system controller or PC.

  • Page 20: Detailed Product Description

    DETAILED PRODUCT DESCRIPTION...

  • Page 21: Major Operating Controls And Their Functions

    MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS WJ-SX150 Matrix Switcher Front View OPERATE OPERATE LED WILL BLINK Matrix Switcher WJ-SX IF COOLING FAN MALFUNCTIONS RESET UNIT MODE 2 3 4 q Operation indicator (OPERATE) r Mode selector (MODE) Lights up when the power of the unit is turned on.
  • Page 22 Rear View o !0 !1 !2 !3 ! 4 !5 !6 EXT IN SIGNAL GND (PLAY IN) ALARM SERIAL CAMERA RS485(CAMERA) SW IN DATA HDR DATA 4 DATA 3 DATA 2 DATA 1 LINE TERM SELECT POWER EXT OUT MONITOR OUT PS•DATA RS485(CAMERA) (REC OUT)

  • Page 23: Wv-Cu360C System Controller

    In these operating instructions, this template's illustrations are used for descriptions. Front View OPERATE LINK ALARM BUSY PROHIBITED MONITOR CAMERA System Controller WV-CU For Matrix Switcher (WJ-SX150) IRIS RESET CLOSE OPEN CAM SETUP SUSPEND ALL RESET AUTO IRIS CALL FOCUS...
  • Page 24 @9 Focus buttons (FOCUS NEAR/FAR) #6 Monitor (Escape) button [MON (ESC)/MON LOCK] Adjust the lens focus of cameras equipped with the MON: Press this button to select a monitor. specified lens. To select a monitor, press the corresponding Press the NEAR and FAR buttons simultaneously. The numeric buttons, followed by the MON (ESC) but- lens focus is adjusted automatically, if the specified ton.
  • Page 25 $3 Next button (NEXT) * The playback of the recorded images is possible when a recorder is connected. Moves a tour sequence one step forward from the step previously paused on the active monitor. Also selects a camera. If the active monitor is in the spot mode, press NEXT while holding down the CAM (SET) button, to replace the currently selected camera with the next higher-numbered camera.

  • Page 26: Rear View

    Rear View RISK OF ELECTRIC SHOCK. DO NOT OPEN RISQUE DE CHOCS ELECTROUES CONTROLLER No. MODE DATA DC 9V IN NE PAS OUVRIR DC 9V IN %2 Controller Number switch (CONTROLLER No.) %4 Data ports (DATA) Selects a number for the system controller for identifica- Exchange the control data with the matrix switcher via tion in a system.

  • Page 27: Installations And System Connections

    INSTALLATIONS AND SYSTEM CONNECTIONS...

  • Page 28: Installations

    INSTALLATIONS WARNING Notes: • An optional cooling fan attached inside the unit is The installations described in the figures should be subject to wear. It needs to be replaced periodical- made by qualified service personnel or system installers. Keep the temperature in the rack below 45 °C (113 °F) at any time.

  • Page 29: System Connection Examples

    PS·Data/Terminal-mode System Controller WV-CU System Controller WV-CU System Controller WV-CU System Controller WV-CU For Matrix Switcher (WJ-SX150) For Matrix Switcher (WJ-SX150) For Matrix Switcher (WJ-SX150) For Matrix Switcher (WJ-SX150) NEXT NEXT NEXT NEXT Max. 4 WV-CU360C System Controllers Note: Before connecting a terminal-mode system controller to the DATA 4 port, configure the system through SETUP...

  • Page 30: System Expansion Connection

    System Controller WV-CU System Controller WV-CU System Controller WV-CU System Controller WV-CU REC PREVIEW INDEX MULTISCREEN For Matrix Switcher (WJ-SX150) For Matrix Switcher (WJ-SX150) For Matrix Switcher (WJ-SX150) For Matrix Switcher (WJ-SX150) RESET TIMER MULTISCREEN ALARM SEARCH ALARM SELECT EL-ZOOM...

  • Page 31: Connections

    • Before connecting the RS-485 camera(s) to DATA 1, 2 tion is available. (Refer to pp. 48 and 63.) and/or 3, configure the system through SX150 Admin Console. Alarm RS485(CAMERA) DATA 3 DATA 2 DATA 1 LINE SELECT RS485(CAMERA) CAMERA WJ-SX150 Matrix Switcher...

  • Page 32: Connections For Rs-485 Type Camera

    SELECT matrix switcher with RS-485 communication feature. Remote control becomes possible. RS485(CAMERA) PS•DATA WJ-SX150 "Home Run" Wiring 1. Connect with a RS-485 camera in "Home Run" wiring as Daisy Chain Wiring shown in the figure. 2. Set the LINE SELECT switch to 2 or 4.

  • Page 33: Connection With The Monitors

    Unit 1 to 4. Unit address 4 Unit address 3 Unit address 2 Unit address 1 Set the same number for the camera's unit address as and CAMERA IN. DATA 3 DATA 2 DATA 1 RS485(CAMERA) CAMERA WJ-SX150 Matrix Switcher...

  • Page 34: Connection With The System Controllers

    Alarm Input 5 Alarm Input 6 System Controller WV-CU System Controller WV-CU Alarm Input 7 Alarm Input 8 For Matrix Switcher (WJ-SX150) For Matrix Switcher (WJ-SX150) Alarm Input 9 Alarm Input 10 NEXT NEXT Alarm Input 11 Alarm Input 12...

  • Page 35: Connection With The Alarm Output

    5. After the connection, set the unit’s EXT IN to GENLOCK ON through SETUP MENU or Admin Console (Refer to Relay pp. 49 or 63). +12V Monitor NC: Normally Closed Contact NO: Normally Open Contact Common WJ-SX150 Matrix Switcher MONITOR EXT IN EXT IN (PLAY IN) ALARM SERIAL CAMERA RS485(CAMERA)
  • Page 36 • Make sure the DATA HDR port's unit address is set to 1 through SX150 Admin Console. (Refer to p. 65.) If another number is selected, you cannot control the recorder. EXT IN WJ-SX150 Matrix Switcher EXT IN (PLAY IN) ALARM SERIAL...
  • Page 37 1. Set the recorder's unit address to a number larger than MONITOR WJ-SX150 Matrix Switcher EXT IN 5. (Refer to the recorder's operating instructions.) EXT IN (PLAY IN)

  • Page 38: Connection With The Pc

    Matrix Switcher Notes: • The following parameters are fixed. Data bit: 8 bits Parity check: none Stop bit: 1 bit • Refer to Cable Specifications in this page for details on cables. Master clock Cable Specifications WJ-SX150 Frame Frame Shield...

  • Page 39: Wj-Sx150 Setup Procedures

    WJ-SX150 SETUP PROCEDURES...

  • Page 40: Setup Procedures

    SETUP PROCEDURES Setup Procedures Notes: • To use SX150 Admin Console, you need to prepare a This unit has two setting procedures. PC and a 9-pin D-sub cable.(Refer to p. 40.) The one is SETUP MENU, which is the unit's on-screen dis- •...
  • Page 41 Operator Settings • Get from a file: A configuration data is sent from the unit to the PC. If you control this unit with a terminal-mode system con- • Select setup data file: A configuration data is selected troller, your operator information, controllable monitors and when sending it from the PC to the unit (or from the unit auto log-in/log-out will be registrable and configurable.

  • Page 42: Wj-Sx150 Setup Menu (Osd)

    The (O) mark indicates that the item has a submenu for WJ-SX150 SETUP MENU will appear on the active mon- more detailed setups. itor as shown below, and the system controller's SETUP Refer to the figure in next page for the composition of indicator will light up.
  • Page 43 WJ-SX150 SETUP MENU 1.00 300 SEQUENCE 100 TIME&DATE Au g /21/2002 10:55 AM TOUR NO. =1 200 D.S.T. STEP CAM PRE DWELL STEP CAM PRE DWELL 300 SEQUENCE 400 ALARM 500 CAMERATITLE 600 SYSTEM 700 OPERATOR REGISTRATION 420 ALARM EVENT 2 of 2 Outside the U.

  • Page 44: Daylight Saving Time)

    D. S. T. (Daylight Saving Time) TOUR NO: Press the NEXT or PREV button to select the tour number. Or press the numeric button(s) to enter a number. WJ-SX150 SETUP MENU 1.00 STEP: This stands for a tour sequence step. 100 TIME&DATE Au g /21/2002 10:55 AM 200 D.S.T.
  • Page 45 • ALARM MODE Notes: You can select an operation mode when alarm input signals • MODE and PRE cannot be selected by pressing the are accepted by the unit. numeric buttons. Press the NEXT or PREV button for selection. Note: The alarm mode is activated when alarm input •...

  • Page 46: Camera Title

    The factory default setting is N.O. A camera title is composed of up to 20 characters. The first four characters (C01_(space) to C16_) are fixed Notes: and the subsequent 20 are editable. • Use N.O. type master clock. • If TIME is selected, an alarm input terminal can adjust The characters available here are the following: the clock by ±30 seconds with an N.O.
  • Page 47 Press the NEXT or PREV button to select the desired para- CAM: This stands for the camera number. meters. PORT: This stands for the data port to which an RS-485 type camera is connected. The following are the • COMPENSATION/VD2/DATA parameters.

  • Page 48: Operator Registration

    GENLOCK submenu appears on the monitor. ON: Select this mode when you gen-lock the unit through an external device (such as a recorder). Parameters Images via the EXT IN connector are not displayed Move the joystick to move the cursor. on Monitor 1 to 4.

  • Page 49: Sx150 Admin Console

    When installing in the default system setting, the software is • Camera Cleaning (p. 56) installed in the following directory: • Daylight Saving Time (p. 56) C: \Program Files\Panasonic\SX150 Alarm Settings • Alarm Mode (p. 57) Installation/Uninstallation • Alarm Event (p. 58) Installation •...

  • Page 50: The Main Window

    Startup/Termination The Main Window 1. Select "Start" – "Program" – "Panasonic" – "SX150 Admin This window appears when starting up SX150 Admin Console x.x" or double-click the "SX150 Admin Console Console. x.x" icon on the desktop. Clicking on each button in the window will display the asso- ciated configuration window.

  • Page 51: Tour Sequence

    Select Setup Data File window (p. 67) (Account Manager): Account Manager window (p. 67) (Communication Port): Communication Port window (p. 68) (Panasonic): Opens the version information window of SX150 Admin Console. Clicking on "OK" button will close the window. Note: To reflect each configuration to the system, save the...

  • Page 52: Group Sequence

    Group Sequence (DELETE) button Deletes the configuration of all the steps of the selected This window configures parameters group tour sequence. sequences. Each group sequence has up to 4 tour sequences which (COPY) button are assigned to the monitors. Copies the configuration of all the steps of the selected tour sequence to the another tour.

  • Page 53: Timer Event

    Timer Event Spot Camera: Executes the spot mode according to the schedule in the Scheduled Mode group. When This window configures the parameters of timer events: the you have selected Spot Camera, select the number schedule (daily, weekly or monthly) and action. of monitor (Mon 1 to 4), camera (Cam 1 to 16) and Up to 30 events are configurable.

  • Page 54: Camera Cleaning

    Camera Cleaning Notes: • When the camera cleaning is active, cleaning will begin This window configures the parameters of camera cleaning from CAM 1 in numerical order. function: the schedule (daily, weekly or monthly) and cam- • Surveillance is impossible during the cleaning. eras to be cleaned.

  • Page 55: Alarm Mode

    Alarm Mode This window configures the operation parameters when an alarm signal is input: an alarm mode, auto reset time and alarm input. (Save Exit) button: Saves the configuration and closes the Daylight Saving Time window. How to Display (Cancel Exit) button: Cancels the configuration and closes the Daylight Saving To display this window, click on the (Alarm Mode) but-...

  • Page 56: Alarm Event

    (Cancel Exit) button (Save Exit) button Cancels the configuration and closes the Alarm Mode win- Saves the configuration and closes the Alarm Event win- dow. dow. (Cancel Exit) button Cancels the configuration and closes the Alarm Event win- Alarm Event dow.

  • Page 57: Alarm Port

    Alarm Port Operator Registration This window configures the parameters of alarm inputs. This window configures the parameters of each operator: the ID, password, level, priority and camera access. Note: Before configuring this window, check on the restrict level of each operation in the Level Table window.

  • Page 58: Level Table

    • Camera Access Group Level Table This group configures the camera operation coverage of This window configures the restrict level of each operation. each operator. The restrict level is classified in Level 1, 2, and 3. Click on each camera's checkboxes and determine the available operation.

  • Page 59: Monitor Selection

    Monitor Selection Auto Login/Logout (Auto Log-in/Log- out) This window determines whether a system controller or PC can select a monitor. This window configures the auto log-in/log-out parameter of each data port. An operator is selectable for auto log-in function. How to Display The log-out time is selectable for auto log-out function.

  • Page 60: Time & Date

    Time & Date Clock This window configures the unit's clock. This window configures the unit's clock display pattern. The The pattern of the Time & Date box depends on the setting unit's clock time is also adjustable. through the Time & Date window. This picture is the example for U.

  • Page 61: Cable Compensation/Vd2/Data/Ext In

    Cable Compensation/VD2/DATA/EXT IN Camera Title This window configures the following parameters of each This window configures the title for each camera. camera: the cable length for transmission loss compensa- Up to 20 characters (camera title + alphanumeric charac- tion and whether to send the VD2 timing pulse or control ters) are available for the title.
  • Page 62 Edit Camera Title Edit Font Window 1. Click on the tab of the desired camera to edit its cam- The Window Soon after Opening era title. The cursor blinks at the first block in the text box. Note: When the desired camera's tab does not appear, click on the buttons A or B beside the tabs.

  • Page 63: Data Port

    Note: The new character has not been saved in the Data Port configuration data at this point. After closing the This window configures the parameters of each data port Edit Font window, be sure to return to the Camera (RS485, DATA 1 to 4 and DATA HDR port): the protocol, the Title window and click on the (Save Exit) but- baud rate (communication speed), and the connected...

  • Page 64: Put A File To Sx150

    sec, 400m sec or 1 sec is available. Put a File to SX150 The factory default setting is OFF. Pressing this button will start the putting of the configuration Group Address: This parameter is only for confir- data from the PC to the unit. mation.

  • Page 65: Get A Configuration Data From Sx150

    Get a Configuration Data from SX150 Select Setup Data File Pressing this button will start the getting of the configuration The setup file is selectable by pressing this button. data from the unit to the PC. For example, this function will be used when making a new setup file with the factory default setting or configuring an existing setup file.

  • Page 66: Account Manager

    Account Manager To register a new operator, click on this button. The Registration window will appear. This window configures the parameters of the operators who can control SX150 Admin Console: the registration, (EDIT) button: To configure the operator information, edit and deletion of an operator. click on this button.

  • Page 67: Communication Port

    Communication Port This window configures the PC's usable communication port number and its baud rate (communication speed). How to Display To display this window, click on the (Communication port) button in the main window (p. 52). Parameters • Parameter Group Com: Select the PC's communication port for the con- nection to the unit.

  • Page 68: Operating Procedures (Terminal Mode)

    OPERATING PROCEDURES (TERMINAL MODE)

  • Page 69: Log-In And Log-Out

    LOG-IN AND LOG-OUT Before starting the following procedures, all system compo- nents must be turned on. The following procedures are applicable when the system controller is connected to the unit. Log-in Note: If an operator ID or password error occurs, the This operation is skipped when the auto log-in is set to ON.

  • Page 70: Log-Out

    Log-out Auto Log-in This operation is skipped when the auto log-out is set to If the auto log-in is set to ON, any operator can login auto- matically. After the controller is turned on, "AUTO" appears This function is used when an operator leaves the controller on the LED display for approximately 2 seconds, then or no longer requires access to the system.

  • Page 71: Monitor Selection And Camera Selection

    MONITOR SELECTION AND CAMERA SELECTION After the log-in procedure, the following operations are Priority Lock available to control the system. Applying Priority Lock The operation begins with selecting a monitor, then the selected camera appears the active monitor. 1. Select the desired monitor. (Refer to Monitor Selection). Monitor Selection 2.

  • Page 72: Camera Selection

    Camera Selection 1. Select the desired monitor. (Refer to p. 74 Monitor Selection.) 2. Press the numeric buttons to select the desired camera number (1 to 16). 3. Press the CAM (SET) button. The selected camera's image will appear on the active monitor.

  • Page 73: Camera Control

    CAMERA CONTROL Buttons and control for cameras or camera site accessories Pan/Tilt Control are located on the right side of the front panel of the system Manual Operation controller. Included are zoom control, focus control, iris control, preset 1. Select the desired monitor and camera. (Refer to p. 74 and pan/tilt controls.

  • Page 74: Program Preset Position

    Program Preset Position Call Preset Position 1. Select the desired monitor and camera. (Refer to p. 74 1. Select the desired monitor and camera. (Refer to p. 74 Monitor Selection and p. 75 Camera Selection.) Monitor Selection and p. 75 Camera Selection.) 2.

  • Page 75: Camera Function Control

    CAMERA FUNCTION CONTROL Camera Function (Shortcut Function) Camera Setup The following function is available only when specified cam- 1. Select the desired monitor and camera. (Refer to p. 74 eras with the camera function feature are used. Monitor Selection and p. 75 Camera Selection.) This function enables executing camera functions via a shortcut.

  • Page 76: Changing To Black And White Images

    Changing to Black and White Images Patrol Learn and Play This function gets the clear camera images on the monitor A routine of manual operations can be stored for a specific while shooting the objects under low light conditions. time and later reproduced repetitively. 1.

  • Page 77: Camera Panning Function

    Camera Panning Function 4. To exit from the mode, press the MON (ESC) button, then press the AUTO PAN button while holding down There are three panning modes available as follows: auto the SHIFT button. pan, sort mode and sequence mode. Refer to p. 16 Camera-related Functions for details on each mode.

  • Page 78: Camera Site Accessories Control

    CAMERA SITE ACCESSORIES CONTROL Receiver Control Auxiliary Control 1. Select the desired monitor and camera. (Refer to p. 74 The following functions are available only when the Monitor Selection and p. 75 Camera Selection.) receivers are included in the system and the specified camera housing is installed.

  • Page 79: Running Sequence

    RUNNING SEQUENCE Tour Sequence 8. Press the PREV button to move the sequence one frame to the previous step from the step that was previ- The following functions are available if a tour sequence has ously paused by pressing the PAUSE button. been previously configured through SETUP MENU or 9.

  • Page 80: Monitor Display Control

    MONITOR DISPLAY CONTROL On-screen Display (OSD) Control On-screen Display (OSD) Position Control The procedure described below lets you determine the dis- play parameters, such as camera title, clock and status, on The procedure described below lets you determine the dis- and off on the active monitor screen.

  • Page 81: System Status Table

    Tnn: Tour Sequence mode (nn is the tour 3 buttons. (3) will move to the desired direction. sequence number.) SET: WJ-SX150 Setup mode ALARM: Alarm Active mode Moving the Monitor Status* ACK: Alarm ACK mode Move the joystick while holding down the OSD, SHIFT and...

  • Page 82: Alarm History Table

    Alarm History Table Video Loss History Table There are 100 alarm records stored in chronological order There are 100 video loss detection records stored in in 10 pages of tables. chronological order in 10 pages of table. 1. Select the desired monitor. (Refer to p. 74 Monitor 1.

  • Page 83: Alarm Control

    ALARM CONTROL Alarm Mode Operation of an Alarm-related Camera (ACK) When alarm (sensor) is accepted, the matrix switcher's operation mode changes to the alarm mode. Then, the sys- You can operate the camera with the alarm input as follows: tem operates as follows: •...

  • Page 84: Resetting The Alarm Inputs

    Resetting the Alarm Inputs Alarm All Reset RESET There are two alarm reset functions: • Alarm reset (resetting the alarm inputs according to the ALL RESET TOUR SEQ input order) T&D CAM ID EVENT • Alarm all reset (resetting all the alarm inputs) AUX1 OFF AUX1 ON STILL...

  • Page 85: Operating Procedures (Ps·data)

    OPERATING PROCEDURES (PS·DATA)

  • Page 86: When Using A Ps·data System Controller

    WHEN USING A PS·DATA SYSTEM CONTROLLER This manual describes the operating procedures which are specifically related to WJ-SX150. For the basic operating procedures such as log-in/log-out, camera selection, and camera control, etc., refer to the system con- troller's operating instructions.

  • Page 87: Monitor Control

    MONITOR CONTROL Refer to the system controller’s operating instructions Priority Lock before you login the system. After the log-in procedure, the You can apply or release priority lock by entering the func- following operations are available to control the system. tion code.

  • Page 88: Running Sequence

    RUNNING SEQUENCE Tour Sequence Group Sequence The following functions are available if a tour sequence has The following function is available only if a group sequence been previously configured through SETUP MENU or has been previously established in SX150 Admin Console. SX150 Admin Console.

  • Page 89: Monitor Display Control

    MONITOR DISPLAY CONTROL The procedure described below lets you determine on-screen display (OSD) items, such as camera title, clock and status, on and off on the active monitor screen. Before controlling each item, monitor selection is necessary. (Refer to p. Monitor Selection.) 1.

  • Page 90: Alarm Control

    ALARM CONTROL Alarm Mode Resetting All the Alarm Inputs When alarm (sensor) is accepted, the matrix switcher's You can reset all the alarm input signals at a time. operation mode changes into the alarm mode. Then, the system operates as follows: 1.

  • Page 91: Expanded Function

    EXPANDED FUNCTION...

  • Page 92: Recorder Control (Terminal Mode)

    RECORDER CONTROL (TERMINAL MODE) Matrix switcher can control Digital Disk Recorder WJ- HD500 Series. The following is the procedure of WJ-HD500 Series SETUP MENU. Note: The following operating procedures those of the ter- minal mode. If you are using a PS·Data system con- troller, refer to p.
  • Page 93 2. Press the RECORDER button to enter the recorder • To move forward or backward search during the mode. playback, press the FF or REW button. • The indicator beside the RECORDER button will ): Search forward light up, and the images from the recorder are dis- REW( ): Search backward played on the active monitor in multiscreen seg-...
  • Page 94 4. Press the INDEX button. The date-and-time entry form pressed, the zooming range are changeable as follows: will appear on the centre of the monitor. GROUP SEQ TOUR SEQ T&D CAM ID EVENT INDEX AUX1 OFF AUX1 ON INDEX REW/FF STILL PREV NEXT...

  • Page 95: Recorder Control (Ps·data)

    RECORDER CONTROL (PS·DATA) This section will describe what you should take notice when using a PS·Data system controller. The same descriptions as the system controller's operating instructions are not mentioned here. Refer to them. Refer the descriptions of terminal mode for illustrations. Controlling the Recorder with a PS·Data system controller Recorder Mode Before operating the recorder, it is necessary to enter the recorder mode.

  • Page 96: Monitor Display When A Cable Loss Occurs

    MONITOR DISPLAY WHEN A CABLE LOS OCCURS Video Loss Display • When input loss of CAMERA IN nn (nn is a number) is detected, " LOSS CH nn" will blink on the monitor. • When more than one LOSS CH have occurred, "VIDEO LOSS CH nn*"...

  • Page 97: Troubleshooting

    TROUBLESHOOTING Check to see the following before request for repair. If a trouble cannot be removed even after checking and trying remedy, contact your dealer. Problem Check item Remedy Matrix switcher does not power up. The power cord may be disconnected Connect the power cord between the unit ' s power socket and the AC outlet.
  • Page 98 Problem Check item Remedy The camera image is dim. Dust may be sticking on the camera Remove the dust from the camera lens. lens. The camera’s lens focus may not be Press the FOCUS NEAR/ FAR buttons proper. to adjust the lens focus. If the camera supports auto focus, press these but- tons simultaneously.
  • Page 99 Problem Check item Remedy The alarm mode is not activated. The alarm mode is set to OFF. Set the alarm mode to SEQUENCE or HOLD in SETUP MENU or SX150 Admin Console. SETUP MENU: Refer to p. 46 Admin console: Refer to p. 57 The port for an alarm input is set to Set the alarm port to ON in SETUP OFF.

  • Page 100: Appendix

    APPENDIX...

  • Page 101: Communication Protocol

    COMMUNICATION PROTOCOL The following pages detail the elements for communication between the unit and the PC. When operating the PC, make sure to conform the serial port's communication speed to that of the unit. The unit's communication speed is configurable by changing COM. SPEED in SETUP MENU. Data, parity and stop bits have been set as follows: Item Parameter...

  • Page 102: Command Table

    Command Table Basic Operation Transmission Command Item Response (ASCII) Parameter (ASCII) (ASCII) Log-in CMD:Wnnnnn-ppppp ANS:WOK (When OK) nnnnn= Operator number ANS:WNG (When NG) ppppp= Password Log-out CMD:H00LG ANS:H00LG mm=Monitor No. Monitor Selection CMD:HmmMS ANS:HmmMS mm=Monitor No. CMD:HmmCScc ANS:HmmCScc cc=Camera No. Camera Selection CMD:HmmCS+1 ANS:HmmCS+1...
  • Page 103 Alarm Control Transmission Command Item Response (ASCII) Parameter (ASCII) (ASCII) cc=Alarm No. Alarm input OAIcc No response mm=Monitor No. Alarm ACK CMD:HmmAK ANS:HmmAK (Each monitor) mm=Monitor No. Alarm reset CMD:HmmAR ANS:HmmAR (Each monitor) Alarm all reset CMD:H00AR ANS:H00AR Alarm suspension MADn Transmission command toggles alarm sus- pension ON or OFF.
  • Page 104 Transmission Command Item Response (ASCII) Parameter (ASCII) (ASCII) Recorder button CMD:HmmRS ANS:HmmRS Playback images of HD500 Series appear on the monitor. (Recorder mode) To cancel the recorder mode, enter the STOP command, then Camera Selection command. (Refer to p. 107). Camera Control Transmission Command Item...
  • Page 105 Transmission Command Item Response (ASCII) Parameter (ASCII) (ASCII) Camera's SETUP MENU CMD:CmmCMccn — mm=Monitor No. cc=Camera No. n=0 OFF n=1 ON The following commands are available in SETUP MENU: CMD:AmmJL (Move the cursor leftward) CMD:AmmJR (Move the cursor rightward) CMD:AmmJU (Move the cursor upward) CMD:AmmJD (Move the cursor downward) CMD:AmmST (SET) CMD:AmmES (ESC)
  • Page 106 Recorder Control Transmission Command Item Response (ASCII) Parameter (ASCII) (ASCII) Multiscreen segment switch- CMD:RmmML ANS:RmmMLn mm=Monitor No. n=0 Spot picture n=1 4 multiscreen segments n=2 7 multiscreen segments n=3 9 multiscreen segments n=4 10 multiscreen segments n=5 13 multiscreen segments n=6 16 multiscreen segments Electronic Zoom CMD:RmmZM...
  • Page 107 Transmission Command Item Response (ASCII) Parameter (ASCII) (ASCII) CMD:RmmFF ANS:RmmFF mm=Monitor No. CMD:RmmRW ANS:RmmRW mm=Monitor No. Forward field advance CMD:RmmFA ANS:RmmFA mm=Monitor No. Backward field advance CMD:RmmRA ANS:RmmRA mm=Monitor No. Record CMD:RmmRC ANS:RmmRC mm=Monitor No. Display date and time entry CMD:RmmSC ANS:RmmSC mm=Monitor No.
  • Page 108 Inquiry Transmission Command Item Response (ASCII) Parameter (ASCII) (ASCII) Model No qid:WJ-SX150 Matrix switcher's model No. Software version qrv:*.** *.**=Matrix switcher's Software version...
  • Page 109 Miscellaneous Control Transmission Command Item Response (ASCII) Parameter (ASCII) (ASCII) Alarm notification — ALM:cc:a:yyyymmdd: cc=Camera No.* hhmmss:b a=0 ALARM a=1 ACK a=2 RESET yyyy=Year mm=Month dd=Date hh=Time mm=Minute ss=Second b=0 D.S.T Enabled b=1 D.S.T Disabled...

  • Page 110: Error Code List

    Error Code List Matrix switcher and external devices Error code(ASCII) Error type Meaning ER000 No error There is no error. ER001 No associated command There is no associated command. ER002 Parameter invalid The parameter's number, digit and range are invalid. ER003 Receiver buffer's overflow The receiver buffer has reached overflow capacity.

  • Page 111: Wj-Sx150 Worksheets

    WJ-SX150 WORKSHEETS Gathering information for the initial configuration and recording on the following worksheets are recommended. Then, if set- tings need to be modified or updated later because of a change in surveillance needs or changes made in the system's com- ponents, those worksheets can be used to track revisions to your system.

  • Page 112: Checklist

    Checklist It is recommended that the worksheets be completed in the following sequence: Date completed: ___/ ___/ ___ Monitors Monitor 1 Monitor 2 Monitor 3 Monitor 4 Enabled/Disabled Monitor OUT 1 Monitor OUT 2 Monitor OUT 3 Monitor OUT 4 Group Sequence Group Monitor 1...
  • Page 113 Tour Sequence Tour __ / 16 Step Camera Preset position Dwell time Remark Tour __ / 16 Step Camera Preset position Dwell time Remark Tour __ / 16 Step Camera Preset position Dwell time Remark...
  • Page 114 Timer Event Schdule Daily Every Hour Minute Mode Weekly Every Sunday Monday Tuesday Wednesday Thursday Friday Saturday Monthly Every Day# Action Monitor# Tour Sequence Tour# Spot Camera Preset Position# Camera# Camera Auto Cleaning Schdule Daily Every Hour Minute Mode Weekly Every Sunday Monday...
  • Page 115 Alarm Mode Alarm Mode Dwell Alarm Input Camera Site Alarm Sequence Mode sec. Alarm Port Serial Port Hold Mode Auto Reset Time sec. Alarm Event ALM# Monitor# Camera# / Tour sequence# Preset position# Alarm Port Alarm # Alarm Port N.O./N.C./Time N.O./N.C./Time N.O./N.C./Time N.O./N.C./Time...
  • Page 116 Operator Registration Camera Access Operator# Password Level Priority 9 10 11 12 13 14 15 16 Timer Camera Operation 1: View & Control 2: View Only 3: Prohibited Level Table Control Level 1 Level 2 Level 3 SX150 Setup Camera Setup Alarm History Display Video Loss History Display System Status Display...
  • Page 117 Monitor Selection Monitor 1 Monitor 2 Monitor 3 Monitor 4 Controller 1(KB1) OK / NG OK / NG OK / NG OK / NG Controller 2(KB2) OK / NG OK / NG OK / NG OK / NG Controller 3(KB3) OK / NG OK / NG OK / NG...
  • Page 118 Camera Title Camera ID (Up to 20 characters) Cam 1 Cam 2 Cam 3 Cam 4 Cam 5 Cam 6 Cam 7 Cam 8 Cam 9 Cam 10 Cam 11 Cam 12 Cam 13 Cam 14 Cam 15 Cam 16 Data Port RS485 Port Protocol...

  • Page 119: Specifications

    SPECIFICATIONS Power Source: 220 V - 240 V AC, 50 Hz Power Consumption: 60 W Camera Input (1 to 16): 1.0 V[p-p]/75 composite video signal 0.5 V[p-p]/75 data signal and 2.5 V[p-p]/75 vertical timing pulse multiplexed Camera Output (1 to 16): 1.0 V[p-p]/75 composite video signal Monitor Output (1 to 4):...
  • Page 120 Matsushita Electric Industrial Co., Ltd. Web Site : http://www.panasonic.co.jp/global/ 2002 © Matsushita Communication Industrial Co., Ltd. All rights reserved. NM-0102-2052 V8QA5947CN Printed in Japan...

Table of Contents