Vacuum Cleaner (Domestic use) MC-CG712 Model No. MC-CG710 Operating Instructions Contents IMPORTANT SAFETY INSTRUCTIONS FOR THE USER ......2 Your Vacuum Cleaner .
IMPORTANT SAFETY INSTRUCTIONS FOR THE USER Before using the vacuum cleaner, please observe these basic safety instructions. Correct usage This appliance is for indoor use with Do not use wet filters after wash, make domestic purpose only and is not sure they are completely dry to avoid specifically designed for allergy sufferers.
OFF/ON Floor nozzle switch pedal The floor nozzle can be Plug adjusted to suit the floor. * Plug might be MC-CG710 Variable different from power control the illustration. Hose Parquet / Carpet Bare floor...
Floor nozzle Storage position MC-CG710 Connect the upper end of the telescopic wand to the curved wand by aligning the tab with the hole. Connect the other end of the telescopic wand to the floor nozzle by inserting and twisting one another.
Replacing the dust bag Replace the dust bag with the new one in the following cases: When the dust bag is full For more details on the dust indicator, see page 3. When suction power has dropped Open the dust cover, and then pull out the dust bag.
MC-CG712 Remove the pre-motor filter from its cover and insert a new one. MC-CG710 Pre-motor filter Replace all parts to their original positions. If the dust bag is not properly installed, the dust cover cannot be closed.
If the problem cannot be solved, please contact your local customer service centre. The contacts can be found in “GUARANTEE”, the separate paper which has been attached with the appliance. Specifications Specifications MC-CG712 MC-CG710 Power source 230 - 240 V, 50Hz Max. input 1400 W 1300 W...
1 PC Dust bag 1 PC TYPE C-17H * Specifications are subject to change without notice. Panasonic Manufacturing Malaysia Berhad (6100-K) No.3, Jalan Sesiku 15/2, Section 15, Shah Alam Industrial Site, 40200 Shah Alam, Selangor Darul Ehsan, Malaysia. http://www.panasonic.net/ V01ZCH00G...