Related Manuals for HAI 32A00-1
Summary of Contents for HAI 32A00-1
- Page 1 Home Automation, Inc. Model 32A00-1 OmniTouch Touchscreen User’s Guide Document Number 32R00-1 Rev A July, 2003...
-
Page 2: All Rights Reserved
Copyright 2003 Home Automation, Inc. © ALL RIGHTS RESERVED... -
Page 3: Operation
DESCRIPTION The Model 32A00-1 OmniTouch Touchscreen is a colorful “plug and play” touchscreen interface for HAI controllers. OmniTouch is self-configuring based on the programming of your HAI controller. Changes made on your system automatically show on the touchscreen, allowing you to maintain and reprogram your system remotely. -
Page 4: List Boxes
TOUCHSCREEN LED The touchscreen LED is used to indicate whether the security system is currently armed or disarmed. If armed in any security mode, the LED is set to red. If the system is disarmed, the LED is set to green. The LED flashes when a Message is displayed. LIST BOXES Selectable items (such as units, zones, buttons, temperatures, etc.) are displayed in a list box. - Page 5 SECURITY If security is part of your automation system, the following information supplements the information in your controller owner’s manual. Refer to your controller owner’s manual for complete operating instructions. Arming and Disarming To arm or disarm the security system, from the Home page, touch the [Security] icon. The top line on the “Security”...
- Page 6 Enter your four-digit code. If you make a mistake, press the [Clear] button and start over or press the [exit] button to return to the previous page. After the last digit of a valid code is entered, the system will perform the desired task. Auto Bypass If “Auto Bypass”...
- Page 7 Even if “Auto Bypass” is enabled, the system will not arm another area if any zones in that area are left open. The touchscreen will display: “System Not Armed – Zone(s) Not Ready”. Secure the open zone(s) in the selected area(s), and then press the [Retry] button; the system will immediately begin arming if all zones are secure.
- Page 8 STATUS The “Status” page displays the current status of various items in the system, zones, security mode, energy cost, outdoor temperature, the time of Sunrise and Sunset, and allows you to control, view, and edit programs for lighting and temperature devices. From the Home page, touch the [Status] icon: The main “Status”...
- Page 9 To view all of the programs that control the selected device, press the [Program] button. To view or edit programs, a code is required. After the last digit of a valid code is entered, a list of programs that control the selected device is displayed: To modify or delete a program, highlight a program by simply touching the program in the list or by pressing the [up arrow] or [down arrow] buttons to scroll through programs.
-
Page 10: Touchscreen Setup
SETUP From the Home page, touch the [Setup] icon. This will bring you to the “Setup” page. From the “Setup” page, touch the appropriate icon: • [Screen Setup] – to configure the operating parameters of your touchscreen. • [System Setup] – to configure operating parameters of the automation and security system and for advanced programming of the automated control and security functions. - Page 11 Backlight On Time (0-15): Sets the length of time the touchscreen display remains illuminated after the last time a button is pressed on the touchscreen. After the time has expired, the touchscreen display turns off. Simply touch anywhere on the screen and the display will immediately illuminate.
-
Page 12: System Setup
Ambient Setting The Ambient Setting is used to brighten the touchscreen display in an illuminated room and dim the touchscreen display in a dark room. When changing from a light setting to dark (e.g. the lights in the room are turned off), the touchscreen will maintain its “light” setting until 30 seconds after the room is darkened. - Page 13 PROGRAM The “Program” pages allow you to construct and edit basic automation programs for lighting and temperatures. You are first prompted to enter a code. After the last digit of a valid code is entered, the “Edit Program” page is displayed: From the “Edit Program”...
- Page 14 Press Monday-Sunday to select the specific day(s). After a day is selected, it may be deselected by pressing the respective button once again. The [Weekdays] button will select Monday- Friday and the [Weekends] button will select Saturday and Sunday. Once complete, press the [OK] button to save the day(s).
- Page 15 Control and temperature devices are displayed in a list boxes. The device may be selected from a list box by simply touching the device in the list or by pressing the [up arrow] or [down arrow] buttons to scroll through list devices, then pressing [enter] to select the highlighted device.