hit counter code
Fujitsu fi-4340C Operator's Manual
  1. Manuals
  2. Brands
  3. Fujitsu Manuals
  4. Scanner
  5. fi-4340C
  6. Operator's manual
Fujitsu fi-4340C Operator's Manual

Fujitsu fi-4340C Operator's Manual

Image scanner
Hide thumbs Also See for fi-4340C:
Table of Contents

Advertisement

Quick Links

Download this manual
fi-4340C Image Scanner
Operator's Guide

Advertisement

Table of Contents
loading

Related Manuals for Fujitsu fi-4340C

Summary of Contents for Fujitsu fi-4340C

  • Page 1 Image Scanner Operator's Guide...
  • Page 3 June, 2006 Sixth edition Specification No. P3PC-E832-06EN NOTICE This manual is for fi-4340C equipped with both USB and SCSI interfaces. Explanations related to the USB interface do not apply to fi-4340C equipped only with SCSI interface. Regulatory Information ■ FCC declaration This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
  • Page 4 Cet appareil numérique de la classe B est conformme à la norme NMB-003 du Canada. ■ Bescheimigung des Herstellers / Importeurs Für den fi-4340C wird folgendes bescheinigt: • In Übereinsstimmung mit den Bestimmungen der EN45014(CE) funkentstört • Maschinenlärminformationsverordnung 3.GPSGV: Der höchste Schalldruckpegel beträgt 70 dB (A) oder weniger, gemäß EN ISO 7779.
  • Page 5 ■ Use in High-safety Applications This product has been designed and manufactured on the assumption that it will be used in office, personal, domestic, regular industrial, and general-purpose applications. It has not been designed and manufactured for use in applications (simply called "high-safety applications"...
  • Page 6 ■ Trademarks Microsoft, Windows, and Windows NT are registered trademarks of the Microsoft Corporation in the United States and/or other countries. ISIS and QuickScan are trademarks or registered trademarks of EMC Corporation in the United States. Adobe, the Adobe logo, and Acrobat are either registered trademarks of Adobe Systems Incorporated in the United States and/or other countries.
  • Page 7 Fujitsu Group Offices Please send your comments on this manual or on Fujitsu products to the following addresses: FUJITSU COMPUTER PRODUCTS FUJITSU CANADA, INC. OF AMERICA, INC. 6975 Creditview Road Unit 1 1255 East Arques Avenue Sunnyvale, Mississauga, On L5N 8E9 Canada CA 94085-4701, U.S.A.
  • Page 8 FUJITSU SYSTEMS BUSINESS FUJITSU KOREA LTD. (THAILAND) LTD. Susong Tower Building, 83-1 12th Fl., Olympia Thai Tower, 444 Susong-Dong, Jongno-Gu, Seoul, Rachadapisek Road, Samsennok, Republlic of Korea Huay kwang, Bangkok 10310, Thailand Phone: (82-2)3787-6159 Phone: +66 (0) 2500-1500 Fax: (82-2)3787-6164...
  • Page 9 Note, Liability READ ALL OF THIS MANUAL CAREFULLY BEFORE USING THIS PRODUCT. IF THIS PRODUCT IS NOT USED CORRECTLY, UNEXPECTED INJURY MAY BE CAUSED TO USERS OR BYSTANDERS. Also, store this manual in a safe place so that it can be easily referred to during use of this product.
  • Page 10 INSTRUCTIONS, CLEANING, REPLACEMENT OF PARTS, ADJUSTMENT and TROUBLESHOOTING. The fi-4340C is a very fast and highly functional color image scanner developed for high quality color image processing, using charge-coupled device (CCD) color image sensors. This scanner features high-speed duplex scanning with an auto- matic document feeder (ADF).
  • Page 11 Do NOT remove from the scanner, stain or scratch the warning labels. ■ About Maintenance The user must not perform repairs on this scanner. Contact the store where you purchased the scnner or an authorized FUJITSU Image Sanner service provider to make repairs to this product.
  • Page 12 Precautions This section describes precautions to follow when installing the scanner. To ensure the longevity and proper functioning of your scanner, do not install the scanner in the places and environments described below. ■ Warning Important warnings employed in this manual are as follows. Do not damage the power cable.
  • Page 13 Make sure that the smoking has stopped, and then contact the store where you bought the scanner or an authorized FUJITSU scanner service provider. Ensure that water or foreign matter does not enter the equipment.
  • Page 14 Before moving the scanner, disconnect the power plug from the power outlet. Do not move the scanner with the power and interface cables connected as this might damage the cables, causeing fire, electric shock or injuries. Before moving the scanner, be sure to disconnect the power plug from the power outlet, and disconnect data cables.
  • Page 15 Do not install the scanner on unstable sufaces. Install the scanner on a desk so that none of its parts protrude outside of the desktop. Also, make sure that the scanner is installed on a flat, level surface. Do not install the scanner on unstable surfaces.
  • Page 16 Protect the scanner from static electricity. Install the scanner away from strong magnetic fields and other sources ofr electronic noise. Also, protect the scanner from static electricity as this might cause the scanner to malfunction. Be careful not to get neckties, necklaces, hair, etc. entangled in the scanner.

  • Page 17: Table Of Contents

    CONTENTS ❏ CHAPTER 1 COMPONENTS ..............1-1 Checking the Components ..........1-2 Units and Assemblies ............1-3 Operator Panel ..............1-6 ❏ CHAPTER 2 INSTALLATION AND CONNECTIONS ......2-1 Confirm of the Manufacturing Labels ........2-2 Placing the scanner .............2-3 ❏ CHAPTER 3 HOW TO INSTALL THE DEVICE DRIVER ......3-1 Procedure ................3-2 ❏...
  • Page 18 ❏ CHAPTER 9 CONSUMABLES AND OPTIONS ........9-1 Consumables ..............9-2 Options ................9-3 VIDEO INTERFACE BOARD ..........9-4 IPC-4D(IMAGE PROCESSING CIRCUIT BOARD) ....9-9 fi-434PR(IMPRINTER) ............9-10 fi-475CMP3(JPEG COMPRESSION BOARD) ....9-11 ❏ CHAPTER 10 SCANNER SPECIFICATIONS .........10-1 Basic Product Specification ..........10-2 Installation Specification ............10-3 Dimensions ...............10-4 ❏...

  • Page 19: Operating Instructions

    COMPONENTS CHAPTER 1 INSTALLATION AND CONNECTIONS CHAPTER 2 HOW TO INSTALL THE DEVICE DRIVER CHAPTER 3 OPERATING INSTRUCTIONS CHAPTER 4 ADF DOCUMENT SPECIFICATION CHAPTER 5 OPERATOR PANEL MESSAGE CHAPTER 6 SETUP MODE CHAPTER 7 TROUBLESHOOTING CHAPTER 8 CONSUMABLES AND OPTIONS CHAPTER 9 SCANNER SPECIFICATIONS CHAPTER10...

  • Page 21: Chapter 1 Components

    CHAPTER COMPONENTS This chapter describes checking the Components, Units and Assemblies of the scanner, and operator panel arrangement,and the function of parts. Checking the Components ............1-2 Units and Assemblies ..............1-3 Operator Panel................1-6 ● 1 - 1...

  • Page 22: Checking The Components

    Checking the Components These high precision components must be handled carefully. Confirm that all the components shown in the following figure have been received. If any component is missing, please contact your sales agent. Scanner Power cable (*1) Power cable (*2) Operator’s Guide(this manual) and Device driver(CD) and...

  • Page 23: Units And Assemblies

    Units and Assemblies This section shows the exterior view and assemblies of the scanner. This section also provides the name of each part and describes its functions. ■ Units (1)Document cover (3)Document holding pad (4)Automatic document feeder(ADF) (2)Document bed (5)Stacker (6)Operator panel (7)Shipping lock (9)ADF lever...
  • Page 24 Sets the SCSI ID. (Default ID is 5.) SCSI Interface connectors Connect to the host system with SCSI interface cables. Third party slot A Fujitsu VIDEO INTERFACE BOARD or fi-475CMP3(JPEG COMPRESSION BOARD) is installed. Spare Pad ASSY Spare pad assembly. (One spare pad assembly is provided as the default setting.)
  • Page 25 ■ Assemblies Stacker Pick roller Pad ASSY Guide A ASSY ● 1 - 5...

  • Page 26: Operator Panel

    Operator Panel The operator panel is located on the upper right hand side of the scanner. The panel consists of an LCD display (16 characters x 2 lines), LEDs and buttons. ■ Arrangement Operator panel Operator panel Previous Stop Send To/ Read nter Start...
  • Page 27 ■ Button and LED Name of the button and Function Button Displays the next LCD screen. Next Displays the previous LCD screen. Previous Moves the cursor to the left. Moves the cursor to the right. Exit When you are entering settings on the Operator panel, pressing this button returns you immediately to the Scanner Ready screen.
  • Page 28 ● 1 - 8...

  • Page 29: Installation And Connections

    CHAPTER INSTALLATION AND CONNECTIONS The chapter describes how to install and connect the scanner. Confirm of the Manufacturing Labels........2-2 Placing the scanner..............2-3 ● 2 - 1...

  • Page 30: Confirm Of The Manufacturing Labels

    Label A (Example; your actual label may differ) Indicates regulations and standards to which this scanner conforms. Label B (Example; your actual label may differ) Indicates product information as follows: Model name fi-4340C MODEL PA03277-B002 Specification number PART NO. ****** Serial number SER.

  • Page 31: Placing The Scanner

    Placing the scanner This section describes how to place the scanner. 1. Place the Shipping lock. 2. Connect the interface cable (USB/SCSI). 3. Set the SCSI ID and the SCSI terminator (When using SCSI interface). 4. Mount the Stacker. 5. Connect the power cable. Turn the power switch off, before placing the scanner.
  • Page 32 ■ Connecting the interface cable When running Windows 95 or Windows NT 4.0, connect the SCSI interface cable. When running Windows 98, Windows ME, Windows 2000 or Windows XP, connect either USB or SCSI cable. NOTICE 1. If the scanner is connected to the computer with both interface cables, USB interface connection will be used.
  • Page 33 When connecting the scanner with SCSI interface cable. 1. Connect the SCSI interface cable to the Back of the Image scanner scanner. 2. Connect the other end of the SCSI interface cable to the computer. Interface cables To the host system NOTICE 1.
  • Page 34 3. Set the SCSI terminator switch on the rear of the image scanner to ON or OFF. NOTICE The SCSI terminator switch is set to ON before shipment from the factory. When the image scanner is located in the middle of a SCSI daisy chain, change the terminator setting to OFF. When the image scanner is located at the end the daisy chain, set the terminator to ON.

  • Page 35: How To Install The Device Driver

    CHAPTER HOW TO INSTALL THE DEVICE DRIVER This chapter describes how to install this software. Procedure..................3-2 ● 3 - 1...

  • Page 36: Procedure

    Procedure For details on how to install the device driver, refer to the attached installation guide and the device driver's user's guide in device driver’s CD. ● 3 - 2...

  • Page 37: Operating Instructions

    CHAPTER OPERATING INSTRUCTIONS This chapter describes this scanner’s operations. Refer to the “Cleaning and Maintenance” manual for routine scanner maintenance. Turning the Power On ..............4-2 Waking up the Scanner from the Low Power Mode ....4-3 Manual Feed Mode Setting ............4-4 Loading Documents on the ADF..........4-5 Loading Documents on the Document bed ......4-9 Loading Documents Larger than the Document bed....4-10...

  • Page 38: Turning The Power On

    Turning the Power On This section describes how to turn the power On. Press the “I” side of the power switch. The power turns On and the green Power lamp at the operator panel lights. Power OFF Power On ● 4 - 2...

  • Page 39: Waking Up The Scanner From The Low Power Mode

    Waking up the Scanner from the Low Power Mode This section describes how to wake up the scanner from the Low Power Mode. To wake up the Scanner, simply press a button, set the papers on the ADF, or send a command to scan from the host computer.

  • Page 40: Manual Feed Mode Setting

    Manual Feed Mode Setting In this mode, the scanner waits for some predetermined time before issuing a “Paper Empty” message after all documents are read. This predetermined time (time-out limit) is specified in the Setup mode. Therefore, you can set the next documents on the ADF paper chute without interrupting the reading operation.

  • Page 41: Loading Documents On The Adf

    Loading Documents on the ADF NOTICE Be sure to change the position of the Shipping lock according to the Chapter2 "Placing the Shipping lock (page 2-3)" procedure before operation. ADF paper chute Guide Guide lever ADF lever Stacker Lift up the ADF paper chute and lock the bar in its operating position.
  • Page 42 • Place the documents face down, with the top to the left as shown in A. (The long side is the top for landscape mode and the short side is the top for portrait mode.) • Holding both ends with both hands, lift the documents. •...
  • Page 43 Photosensitive paper Perforated or punched documents Documents that are not square or rectangular Very thin documents • Do not use the following type documents for scanning with the ADF. Paper-clipped or stapled documents Documents on which the ink is still wet Documents smaller than A8 (portrait) size Documents wider than A3 or 11 in.
  • Page 44 Set the guides so that there is a small clearance between the document edges and the guides. Load the document face down on the ADF paper chute and adjust the guides to the document width. Guide Document Guide leber (Both sides) NOTICE •...

  • Page 45: Loading Documents On The Document Bed

    Loading Documents on the Document bed CAUTION Do not look directly at the light source during the read operation. Document cover Document holding pad Document bed Open the document cover. Place the document face down and eference mark align the top left corner with the reference mark.

  • Page 46: Loading Documents Larger Than The Document Bed

    Loading Documents Larger than the Document bed CAUTION Do not look directly at the light source during the read operation. Document bed Document Open the Document cover to an angle of approximately 90 degrees, and lift up the cover (in the direction of the arrow) to remove it.

  • Page 47: Reading A Page From A Thick Book

    Reading a Page from a Thick Book CAUTION Do not look directly at the light source during read operation. Thick book Open the Document cover. Place the book face down on the Document bed. Issue the read command from the host system.

  • Page 48: Clearing Paper Jams

    Clearing Paper Jams Paper ADF lever Remove all the documents from the ADF paper chute Pull the ADF lever to open the ADF. Remove the jammed document(s). NOTICE • Inspect the paper and the paper path. Make sure no staples, paper clips or other materials caused the jam.

  • Page 49: Adf Document Specification

    CHAPTER ADF DOCUMENT SPECIFICATION This chapter describes the document size and document quality required to use the ADF successfully. Document Size................5-2 Document Quality...............5-3 Maximum ADF Capacity.............5-5 Areas not to be Perforated ............5-6 Grounding Color Areas..............5-7 Multi Feed Detection Conditions..........5-8 Job Separation Sheet..............5-9 ●...

  • Page 50: Document Size

    Document Size The following figure shows document sizes that the scanner can read using the ADF. Maximum Minimum Scanner fi-4340C 216 (8.5 in) 356 (14 in) 53 (2.1 in) 74 (2.9 in) (Unit : mm) ● 5 - 2...

  • Page 51: Document Quality

    Document Quality This section describes the types and weights of paper that the scanner can read and precautions in preparing documents to ensure maximal scanner functioning. ■ Document type The recommended paper type for documents is as follows: • Woodfree paper •...
  • Page 52 • Documents that are not square or rectangular • Very thin documents Do not use the following type documents for scanning with the ADF. • Paper-clipped or stapled documents • Documents on which the ink is still wet • Documents smaller than A8 (portrait) size •...

  • Page 53: Maximum Adf Capacity

    Maximum ADF Capacity The maximum number of sheets that can be loaded on the ADF paper chute is determined by the size and weight of the documents. The following graph shows the maximjum documents loading capacity of the ADF based on paper weight. A4/Letter or smaller Legal ADF chute...

  • Page 54: Areas Not To Be Perforated

    Areas not to be Perforated With the ADF, perforations in the shaded areas may cause errors. If you must read data from such a paper, use the Document bed: Center of Center of sensor arm sensor arm Read reference position Top of paper Front side...

  • Page 55: Grounding Color Areas

    Grounding Color Areas The shaded area in the Figure below should have paper grounding color (white) or drop-out color. If not, turn the white level following Off when reading. Grounding color (white Scanning or drop-out color area direction Read reference (main) position Scanning...

  • Page 56: Multi Feed Detection Conditions

    Multi Feed Detection Conditions Select one of the following: • Check thickness • Check length • Check thickness and length The following conditions are required when any of the above option is selected: 1 Thickness: 0.065 mm to 0.15 mm 2 Paper length accuracy: 1% or less 3 Any black print at the center of the leading edge of the paper is not allowed.

  • Page 57: Job Separation Sheet

    Job Separation Sheet 1 Shape The following shows the typical format of the job separation sheet. Top of paper Feeding direction Bottom of paper Center of paper (Unit : mm) 2 Paper conditions Paper width must be A4 or larger (210 mm or larger in width). ●...
  • Page 58 ● 5 - 10...

  • Page 59: Operator Panel Message

    CHAPTER OPERATOR PANEL MESSAGE This chapter describes the components of the scanner, part names, and LED indicators. After unpacking the scanner, confirm that all components have been received by checking them against the list in the first section. Counter Display ................6-2 Operation status .................6-3 Temporary error................6-4 Alarm ...................6-5...

  • Page 60: Counter Display

    Counter Display The displays for the Paper and Abrasion counters are shown below: Paper counter > Abrasion counter Simultaneously press the arrow buttons for at least 1 second, to switch to the Life counter panel display as shown below: > Life counter Function Counter...

  • Page 61: Operation Status

    Operation status The operation status messages are as follows: <Power-on> <Reading> <Low Power Mode> When the Scanner Display turns Off and the power indicator remains “On”, the scanner is in the Low Power Mode. NOTICE One of the following will wake up the scanner: •...

  • Page 62: Temporary Error

    Temporary error <Hopper empty> This message is displayed if there is no more paper on the ADF paper chute during a read operation in ADF mode. Fill the ADF paper chute with paper. To enable the read operation, press the stop button.

  • Page 63: Alarm

    Alarm One of the following messages is displayed if an error occurs in the scanner. If one of the following error messages is displayed, turn the power Off and then On again. If the same message is displayed, contact your service representative. <Optical alarm front>...
  • Page 64 <IPC Board alarm> (Image Processing board) <Self-diagnostics Error> The Power indicator (LED) and Check lamp blink alternately. <Imprinter Alarm> The Power Indicator (LED) and Check lamp blink alternately. <SCSI Controller Alarm> <USB Controller Alarm> ● 6 - 6...

  • Page 65: Chapter 7 Setup Mode

    CHAPTER SETUP MODE This chapter describes the setup mode of the scanner. Activating the Setup Mode ............7-2 Contents of the Setup Mode............7-3 ● 7 - 1...

  • Page 66: Activating The Setup Mode

    Activating the Setup Mode This section describes how to activate the setup mode. 1. Turn the power On. Then the scanner displays “Scanner Ready” on the LCD. Screen M1 > 2. If the scanner does not have a video interface option, go to the procedure step 3. Press then the scanner with the video interface option displays Screen M2.

  • Page 67: Contents Of The Setup Mode

    Contents of the Setup Mode This section describes the contents of the setup mode. Selectable Item Description Default parameters Specifies the Multi feed detection. Multi feed is detected by checking the Multi feed check No/Yes document length and/or paper thickness.(*1) Specifies the document length to enable Length check Tolerance:...
  • Page 68 (Continued) Selectable Item Description Default parameters When the IPC-4D image processing board is installed in the third party Slot, select IPC mode Standard/IPC4D Standard this IPC-4D board or the image processing circuit built in the scanner. Left/Right: Left/Right: 0 to 15 mm 0 mm Adjusts the edge areas to be erased from Top:...
  • Page 69 Setting Multi feed detection (Paper Thickness) When you set the use of Multi feed detection, you must set it as follows: 1. Press and let the scanner display Screen 1. Screen 1 2. At Screen 1. Press either the button to set the Multi feed detection according to the paper thickness (transmitted light).
  • Page 70 Setting Multi feed detection (Paper Length) 1. Press and let the scanner display Screen 2. Screen 2 2. Press either the button to set Multi feed detection according to paper length. The paper length is checked using the difference between two consecutive sheets of paper fed from the ADF. Each time either of these buttons is pressed, the location of the blinking moves.
  • Page 71 Setting IPC pre-set mode When you set the use of the IPC pre-set mode, you must set it as follows: 1. Press “Next” or “Previous” and let the scanner display Screen 4. Screen 4 2. At Screen 4, press to select the pre-Setting and press to activate the pre-setting.
  • Page 72 Reset of the abrasion counter When you reset the abrasion counter, you must set it as follows: 1. Press “Next” or “Previous” and let the scanner display Screen 6. Screen 6 P i c k R o l l e r 2.
  • Page 73 Setting the pick start time When you set the pick start time, you must set it as follows: 1. Press “Next” or “Previous” and let the scanner display Screen 10. Screen 10 2. At Screen 10, press to increase the Pick start time or press to decrease the Pick start time.
  • Page 74 Setting the time-out limit 1. Press “Next” or “Previous” and let the scanner display Screen 11. Screen 11 2. At Screen 11, press to increase the number or press to decrease the time-out limit. Then press to activate the setting. NOTICE Default is 30 seconds.
  • Page 75 2. At Screen 12,Screen 13, or Screen 14, select “Yes” by pressing the button, then press . The scanner displays Screen 15. (X = 7, 8, or 9) Screen 15 3. At Screen 15, if you want to let the offset return to default, select “Yes” otherwise “No” then press .
  • Page 76 5. At Screen 19,Screen 20 or Screen 21, press to increase the offset or press to decrease the offset. Then press to activate the setting. The scanner displays the next item of the setup mode. 10 IPC Status Display This function allows you to check whether or not the IPC-4D(IMAGE PROCESSING CIRCUIT BOARD) is installed, and whether or not fi-475CMP3(JPEG COMPRESSION BOARD) is installed, and whether or not fi-434PR(IMPRINTER) is installed.
  • Page 77 if fi-434PR(IMPRINTER) and fi-475CMP3(JPEG COMPRESSION BOARD) are installed,Screen 28 will appear. Screen 28 if fi-434PR(IMPRINTER), IPC4D(IMAGE PROCESSING CIRCUIT BOARD) and fi-475CMP3(JPEG COMPRESSION BOARD) are installed,Screen 29 will appear. Screen 29 2. Press to return. 11 Low Power Mode Setting 1. Press “Next” or “Previous”...
  • Page 78 Screen 32. Screen 32 The scanner displays the ID number if the applicable board is installed. NOTICE If the Fujitsu video Interface Option board is installed properly, the display shows “ID=7”. 2. Press to return. ● 7 - 14...
  • Page 79 The factory default is “Standard”. NOTICE fi-4340C has built-in Image Processing. The following image processing is supported both by the fi- 4340C and the IPC-4D(IMAGE PROCESSING CIRCUIT BOARD). As a default, the scanner built-in functions are enabled. By setting "On" using the Operator Panel, the IPC-4D image processing overrides the built-in functions.
  • Page 80 2. At Screen 34, press to select “Yes” and press . Then the scanner displays Screen 35. Screen 35 3. At Screen 35, select “Yes” to return the settings to the factory default or select “No” to make new settings (as shown below). Then press .
  • Page 81 16 Adjust FB Erasing Edges 1. Press “Next” or “Previous” and let the scanner display Screen 40. Screen 40 2. At Screen 40, press to select “Yes” and press . Then the scanner displays Screen 41. Screen 41 3. At Screen 41, select “Yes” to return the settings to the factory default or select “No” to make new settings (as shown below).
  • Page 82 7. At Screen 45, press to change the top setting. The value changes in 1 mm units. Then press to activate the setting. The scanner displays the next setup item. 17 Color to be Read in Unicolor Reading 1. Press “Next” or “Previous”...
  • Page 83 Speed: 2 > 1 Image quality: 1 > 2 Changing this mode does not affect color and black-and-white scanning. 3. Then press to activate the setting. The scanner displays the next item of the setup mode. 19 Reset of the Ink Remain Counter The ink remain counter checks the service life of the print cartridge and makes a message “Please a new Ink”...
  • Page 84 5. Press to perform reset operation.The ink remain indicator returns to (Screen 52) Screen 52 6. Press .The LCD returns to the “Ready” screen. Screen 53 > 20 Setting the Numbering Print Function(for fi-434PR Imprinter Option) You can specify conditions of the numbering print function from the operator panel when the scanner is equipped with the fi-434PR imprinter.The numbering counter increments 1 each a sheet of paper is read.Numbering print starts with a top margin of 7mm.
  • Page 85 4. At Screen 57,select the initial number.Press to move the place of the blinking (changeable) digit and press to change the value, than press . The scanner displays Screen 58 Screen 58 NOTICE The possible maximum number is 99999 (for five digits) or 16777215 (for eight digits). 5.
  • Page 86 ● 7 - 22...

  • Page 87: Chapter 8 Troubleshooting

    CHAPTER TROUBLESHOOTING This chapter describes some potential problems and solutions that may occur when using this scanner. Troubleshooting................8-2 ● 8 - 1...

  • Page 88: Troubleshooting

    Troubleshooting This chapter describes some potential problems and solutions that may occur when using this scanner. Should any of the following problems arise, refer to the relevant section listed below. - Power doesn’t turn on ...... Refer to "Chapter 4 Troubleshooting” of Cleaning & Maintenance - Operator Panel goes blank .....

  • Page 89: Chapter 9 Consumables And Options

    CHAPTER CONSUMABLES AND OPTIONS This chapter describes the consumables and options. Consumables ................9-2 Options ..................9-3 VIDEO INTERFACE BOARD ............9-4 IPC-4D(IMAGE PROCESSING CIRCUIT BOARD) .....9-9 fi-434PR(IMPRINTER) ..............9-10 fi-475CMP3(JPEG COMPRESSION BOARD) ......9-11 ● 9 - 1...

  • Page 90: Consumables

    Consumables The following table lists consumables used for the scanner. Be sure to keep some consumables in stock. The customer is responsible for changing these items periodically, in accordance with the guidelines given below and in the “Cleaning and Maintenance” manual. If they are not changed as recommended, the scanner may not function properly.

  • Page 91: Options

    The following table lists options available for the scanner. Product name VIDEO INTERFACE BOARD CA02956-2391 IPC-4D(IMAGE PROCESSING CIRCUIT BOARD) CA02919-0521 fi-434PR(IMPRINTER) PA03237-D103 fi-475CMP3(JPEG COMPRESSION BOARD) CA02956-2398 Contact your sales agent or PFU Limited and Fujitsu Group Offices for more information. ● 9 - 3...

  • Page 92: Video Interface Board

    VIDEO INTERFACE BOARD ■ How to Install the VIDEO INTERFACE BOARD Loosen the two screws to remove the Plate plate. Screws CAUTION Turn Off the power before removing the Third Party slot plate. Insert the board along the rails of the third party slot.
  • Page 93 ■ Reading Mode Setting When the VIDEO INTERFACE BOARD is Installed This section describes the button specifications and setup details for reading modes when the scanner has the VIDEO INTERFACE BOARD in the third party slot. When the reading mode is set by the command from the host computer, the following button operation is not required.
  • Page 94 6. Select “Portrait” or “Landscape” by pressing . Then press . The scanner displays Screen 4. Screen 4 7. Select Size by pressing . Then press . The scanner displays Screen 5. Screen 5 8. Select Resolution by pressing . As the cursor moves to the left 100/150 may appear. Then press .
  • Page 95 10. Select Back Density (when “Duplex” was Selected) by pressing . As the cursor moves to the right, may appear. Then press . The scanner displays Screen 8. Screen 8 11. Select Front Halftone by pressing Description Parameter Halftone is Off. Therefore binary reading is specified. Halftone with dither is specified.
  • Page 96 13. Select Front Document Type by pressing Description Parameter L. (Line) White level following is ON. Top 3mm part of the document must be left blank (grounding color is drop-out color). Use this specification for reading line arts or texts. P.

  • Page 97: Ipc-4D(Image Processing Circuit Board)

    IPC-4D(IMAGE PROCESSING CIRCUIT BOARD) The IPC-4D(IMAGE PROCESSING CIRCUUIT BOARD) performs the image processing. IPC-4D(IMAGE PROCESSING CIRCUIT BOARD) supports the following image processing. Item Description Pre-Filter BallPoint Pen Mode : Smooth ballpoint pen strokes into a single bold line. Background Removal Remove background tone and light dither.

  • Page 98: Fi-434Pr(Imprinter)

    fi-434PR(IMPRINTER) The following table shows specifications of the fi-434PR(IMPRINTER). Item Specification Printing Method Thermal inkjet printing Alphabet Letters : A to Z, a to z Printed Characters Numeric Characters : 0,1 to 9 Symbols : ! “ # $ % & ’ ( ) * + , - . / : ; < = > ? @ [ ¥ ] ^ _ ‘ { | }⎯ Maximum Number of Characters Printed...

  • Page 99: Fi-475Cmp3(Jpeg Compression Board)

    fi-475CMP3(JPEG COMPRESSION BOARD) The following table shows specifications of the fi-475CMP3(JPEG COMPRESSION BOARD). Item Specification Standard Conforms to the ISO/IEC 10918-1 JPEG standard baseline process Format gray and multi-color images (JPEG) Scan range duplex A3/600 dpi, compression scans possible Compressed Process- Real time duplex compression processing JPEG compression Built-in quantum table providing a 7 grade selection ranging from small...
  • Page 100 Slide the fi- 475CMP3(JPEG COMPRESSION BOARD) fully into the fi-475CMP3 option slot along it's internal rails, and fasten with the two screws provided. CAUTION Protective measures are required to prevent damage from static electricity. ● 9 - 12...

  • Page 101: Chapter 10 Scanner Specifications

    CHAPTER SCANNER SPECIFICATIONS This chapter describes the basic product specifications, installation specifications, and dimensions. Basic Product Specification ............10-2 Installation Specification ............10-3 Dimensions .................10-4 ● 10 - 1...

  • Page 102: Basic Product Specification

    Basic Product Specification Scanner Type ADF (Duplex), Document bed Image sensor CCD x 2 Front/Back Light source White Xenon discharge tube x 2 Front/Back Document Minimum A8 (Portrait) 127g/m Size Maximum A4/Letter/Legal US Ledger Paper Weight Note (*1) 52 g/m (14 lb) to 127 g/m (34 lb) Scanning...

  • Page 103: Installation Specification

    Installation Specification - Without IPC-4D(IMAGE PROCESSING CIRCUIT BOARD) : Less than 1.5 A - With IPC-4D(IMGGE PROCESSING CIRCUIT BOARD) : Less than 3.0 A The following table lists the installation specifications of the scanner. Item Specification Dimensions (mm) Depth Width Height (Without ADF paper chute and 423 (16.6 in)

  • Page 104: Dimensions

    Dimensions (21.9") (14.2") (unit : mm) ● 10 - 4...

  • Page 105: Glossary Of Terms

    GLOSSARY OF TERMS A4 size A standard paper size. Paper size is 210 x 297 mm. A5 size A standard paper size. Paper size is 148 x 210 mm. A6 size A standard paper size. Paper size is 105 x 148 mm. A7 size A standard paper size.

  • Page 106: Dropout Color

    Multi feed detection A scanner function which detects the accidental feeding of multiple sheets by the ADF unit. Can be turned on or off by the operator. Double Letter Size A standard paper size used in the U.S.A. and other countries. Paper size is 11 x 17 inches. Dots per inch.

  • Page 107: Image Emphasis

    Image emphasis Density is decreased for lighter but not completely white areas adjacent to black areas. Weakening this emphasis eliminates spot noise or produces softened images. Image processing An image is read with specified parameters. Interface The connection that allows communication from one part of a system to another. For example, electrical signals are transferred between the computer and scanner over an interface cable.

  • Page 108: Noise Removal

    Noise removal Isolated noise from an image appearing as black spots in white areas and voids in black areas is removed to improve image quality. Operator panel A panel containing the scanner indicators and buttons. The operator panel is used to control scanner operations such as loading document, selecting features, and changing setup options.
  • Page 109 Third Party Interface Optional board provided by Fujitsu or interface board provided by a third party can be installed and used. Time-out limit This is the time the scanner waits for next document insertion after the last document feeding. The scanner returns Paper Empty when no document is set after time-out limit.
  • Page 110 ● GL - 6...

  • Page 111: Index

    INDEX Feeding direction .........5-2 Abrasion counter......... 6-2 Activating the Setup mode....7-2 Grayscale mode setting.....7-18 erasing edges ......7-15 lever ..........1-4 mode..........6-4 Halfone processing......9-7 Alarm ..........6-5 Heat capacity........10-3 Ambient condition ......10-3 Hopper empty ........6-4 Arrangement ........1-6 Assemblies .........
  • Page 112 IPC Status Display....... 7-12 low power mode ......7-13 Offset setting......7-3, 7-10 Multi feed detection Operation status........6-3 paper length ....... 7-6 Operator panel ........1-6 paper thickness......7-5 Option .......... 9-3, 9-4 Numbering Print Function.... 7-20 Offset ........... 7-10 pick start time ........
  • Page 113 (Send To)button........1-7 (Start)button........1-7 (Stop)button ........1-7 ● IN-3...
  • Page 114 Image Scanner Operator’s Guide P3PC-E832-06EN Date published: June, 2006 PFU LIMITED • Copying of the contents of this manual in whole or in part and copying of the scanner application is forbidden under the copyright law. • The contents of this manual are subject to change without notice.

Table of Contents