hit counter code
HP Compaq Mini 110 Maintenance And Service Manual
  1. Manuals
  2. Brands
  3. HP Manuals
  4. Laptop
  5. Compaq Mini 110
  6. Maintenance and service manual

HP Compaq Mini 110 Maintenance And Service Manual

Hewlett-packard laptop user manual
Hide thumbs Also See for Compaq Mini 110:
Table of Contents

Advertisement

Quick Links

See also: User Manual
HP Mini 1101, HP Mini 110, HP Mini 110
by Studio Tord Boontje, and Compaq Mini
110
Maintenance and Service Guide

Advertisement

Table of Contents
loading

Related Manuals for HP Compaq Mini 110

Summary of Contents for HP Compaq Mini 110

  • Page 1 HP Mini 1101, HP Mini 110, HP Mini 110 by Studio Tord Boontje, and Compaq Mini Maintenance and Service Guide...
  • Page 2 Logo is a trademark of its proprietor. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty.

  • Page 3: Revision History

    Publication date October 2009 Description ● Chapter 1 — Updated to incorporate Windows 7 and the HP Mini 110 by Studio Tord Boontje ● Chapter 3 — New and updated spare parts and descriptions ● Chapter 4 — New and updated spare parts and descriptions ●...
  • Page 4 Revision history...
  • Page 5 Safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the device, do not place the device directly on your lap or obstruct the device air vents. Use the device only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow.
  • Page 6 Safety warning notice...

  • Page 7: Table Of Contents

    Table of contents 1 Product description 2 External component identification Top components ... 5 TouchPad ... 5 Light ... 6 Keys ... 7 Front components ... 9 Right-side components ... 11 Left-side components ... 12 Display components ... 13 Bottom components ... 14 Wireless antennas ...
  • Page 8 Component replacement procedures ... 42 Service tag ... 42 Device feet ... 43 Battery ... 44 SIM ... 45 Memory module ... 46 Keyboard ... 48 RTC battery ... 53 Mass storage devices ... 54 Top cover ... 57 WLAN module ... 60 WWAN module ...
  • Page 9 When to create restore points ... 117 Creating a system restore point ... 117 Restoring to a previous date and time ... 118 Backing up and recovering using HP Recovery Manager ... 118 Backing up your information ... 118 Restoring using a Windows computer ... 111 Restoring using a Linux computer ...
  • Page 10 Performing a recovery ... 120 Windows Vista backup and recovery ... 122 Backing up your information ... 122 Performing a recovery ... 123 Windows XP backup and recovery ... 126 Backing up your information ... 126 Performing a recovery ... 127 9 Connector pin assignments Audio-in (microphone) ...

  • Page 11: Product Description

    Product description Category Description Product name HP Mini 1101 HP Mini 110 HP Mini 110 by Studio Tord Boontje Compaq Mini 110 Processor Intel® Atom™ N280 1.66-GHz processor, 512-KB Level 2 cache, 533-MHz front-side bus (FSB) Intel Atom N270 1.6-GHz...
  • Page 12 √ √ √ Not supported by √ Not supported by √ √ √ √ √ √ √ HP Mini 110 HP Mini 110 by Compaq Mini 110 Studio Tord Boontje √ √ √ √ √ √ √ √ √ √...
  • Page 13 802.11b/g/n and 802.11b/g WLAN modules Integrated WWAN by way of HP un2400 Mobile Broadband Module (optional) NOTE: Not available in HP Mini 110 models with Mobile Mi installed. External Digital Media Slot (consumer media cards models) or Media Card Reader...
  • Page 14 Serviceability End-user replaceable parts: AC adapter Battery (system) Hard drive Keyboard Memory module Solid-state drive Chapter 1 Product description HP Mini HP Mini 110 HP Mini 110 by 1101 Studio Tord Boontje √ √ √ √ √ √ √ √...

  • Page 15: External Component Identification

    External component identification Components included with the device may vary by region and model. The illustrations in this chapter identify the standard features on most device models. Top components TouchPad Component Left TouchPad button TouchPad TouchPad scroll zone Right TouchPad button Description Functions like the left button on an external mouse.

  • Page 16: Light

    Light Component Caps lock light Chapter 2 External component identification Description On: Caps lock is on.

  • Page 17: Keys

    Keys NOTE: Refer to the illustration that most closely matches your computer. Component Function keys Windows® logo key Windows applications key Description Execute frequently used system functions when pressed in combination with the key. Executes frequently used system functions when pressed in combination with a function key.
  • Page 18 Component Function keys Home key Program Switcher key Chapter 2 External component identification Description Execute frequently used system functions when pressed in combination with the Executes frequently used system functions when pressed in combination with a function key. Returns to the Home Screen. Displays the Start New Program button from anywhere on the device.

  • Page 19: Front Components

    Front components Component Power light Power switch Drive light Battery light Description ● On: The device is on. ● Blinking: The device is in the Sleep state (Windows Vista) or Standby (Windows XP or Mobile Mi). ● Off: The device is off or in Hibernation. ●...
  • Page 20 Component Wireless light Wireless switch Chapter 2 External component identification Description ● Blue: An integrated wireless device, such as a wireless local area network (WLAN) device, is ● Amber: All wireless devices are off. Turns the wireless feature on or off, but does not establish a wireless connection.

  • Page 21: Right-Side Components

    Right-side components Component USB ports (2) Digital Media Slot (consumer models) or Media Card Reader (commercial models) External monitor port RJ-45 (network) jack Description Connect optional USB devices. Supports the following optional digital card formats: ● Memory Stick (MS) ● Memory Stick Pro (MSP) ●...

  • Page 22: Left-Side Components

    Left-side components Component Security cable slot Power connector AC adapter light Vent USB port Audio-out (headphone) jack/Audio-in (microphone) jack Chapter 2 External component identification Description Attaches an optional security cable to the device. NOTE: The security cable is designed to act as a deterrent, but it may not prevent the device from being mishandled or stolen.

  • Page 23: Display Components

    Display components Component Speakers (2) Internal display switch Webcam Webcam light Internal microphone Description Produce sound. Turns off the display if the display is closed while the power is on. NOTE: The display switch is not visible from the outside of the device. Captures still photographs and videos.

  • Page 24: Bottom Components

    Bottom components Component Battery bay Battery release latches (2) Vent Memory module compartment Chapter 2 External component identification Description Holds the battery. Release the battery from the battery bay. Enables airflow to cool internal components. NOTE: The device fan starts up automatically to cool internal components and prevent overheating.

  • Page 25: Wireless Antennas

    Wireless antennas Component WWAN antennas (2) (select models only)* WLAN antennas (2)* *The antennas are not visible from the outside of the device. For optimal transmission, keep the areas immediately around the antennas free from obstructions. To see wireless regulatory notices, refer to the section of the Regulatory, Safety and Environmental Notices that applies to your country or region.

  • Page 26: Illustrated Parts Catalog

    Illustrated parts catalog Service tag When ordering parts or requesting information, provide the computer serial number and model description provided on the service tag: (1) Product name: This is the product name affixed to the front of the device. (2) Serial number (s/n): This is an alphanumeric identifier that is unique to each product. (3) Part number/Product number (p/n): This number provides specific information about the product's hardware components.

  • Page 27: Device Major Components

    Display assembly (includes 1 webcam, 1 microphone, 1 speaker box, and 2 WLAN antenna transceivers/cables; WWAN on select models only) Display assembly components on page 25 spare parts. For use with black HP models only ● 10.1-inch, high-definition, AntiGlare display assembly (includes WWAN) ●...
  • Page 28 ● 10.1-inch, high-definition, AntiGlare display assembly (includes WWAN) ● 10.1-inch, WSVGA, AntiGlare display assembly (includes WWAN) For use with HP Mini 110 by Studio Tord Boontje models only ● 10.1-inch, high-definition, AntiGlare display assembly (includes WWAN) ● 10.1-inch, standard-definition, AntiGlare display assembly (includes WWAN) ●...
  • Page 29 Item Description ● For use with international models ● For use only in Israel ● For use only in Italy ● For use only in Japan ● For use only in Latin America ● For use only in Portugal ● For use only in Russia ●...
  • Page 30 ● For use only in the United Kingdom ● For use in the United States only For use with white HP models only ● For use only in Bosnia, Croatia, Montenegro, Serbia, and Slovenia ● For use only in Brazil ●...
  • Page 31 ● For use only in Turkey ● For use only in the United Kingdom For use only with white HP and HP Mini 110 by Studio Tord Boontje models in the United States Top cover (includes TouchPad) ● For use with black and blue models only ●...
  • Page 32 Item Description (9a) Power switch and wireless switch actuators (9b) Memory module compartment cover (9c) Bezel for Digital Media Slot (consumer models) or Media Card Reader (commercial models) Wireless modules (10) WLAN module WLAN/Bluetooth combination module Broadcom 4312 802.11/b/g/n WLAN module ●...
  • Page 33 Not available for computers with Mobile Mi installed. HP un2400 Mobile Broadband Module (select models only) HP un2400 Mobile Broadband Module for use only with Verizon Wireless (select models only) 483377-003 WWAN module for use only in the People's Republic of China...
  • Page 34 2048-MB (15) Base enclosure (includes 4 rubber feet) For use with black and blue models only For use with pink, white, and HP Mini 110 by Studio Tord Boontje models only (16) Battery 6-cell lithium-polymer (Li-Pol) battery (2.55-Ah, 55-Wh) 3-cell lithium-polymer (Li-Pol) battery (2.55-Ah, 28-Wh)

  • Page 35: Display Assembly Components

    Hinge covers Display bezel For use with HP Mini 1101 and HP Mini 110 only For use with HP Mini 110 by Studio Tord Boontje models only For use with Compaq Mini 110 only Display Hinge Kit (Includes left and right display panel hinges)
  • Page 36 For use with pink HP models only For use with white HP models only For use with blue HP models only For use with HP Mini 110 by Studio Tord Boontje models only For use with Compaq models only Display Screw Kit (not illustrated)

  • Page 37: Mass Storage Devices

    Mass storage devices NOTE: Each hard drive spare part kit and solid-state drive spare part kit includes a cable and bracket. Item Description Hard drive (select models only) 320-GB, 5400-RPM 250-GB, 5400-RPM 160-GB, 7200-RPM 160-GB, 5400-RPM Hard Drive Hardware Kit (not illustrated) Solid-state drive 64-GB 32-GB...

  • Page 38: Miscellaneous Parts

    For use in Taiwan Rubber Kit (contains 4 device feet) For use with black and blue models only For use with pink, white, and HP Mini 110 by Studio Tord Boontje models only Screw Kit Chapter 3 Illustrated parts catalog...

  • Page 39: Sequential Part Number Listing

    483377-002 HP un2400 Mobile Broadband Module (select models only) 483377-003 HP un2400 Mobile Broadband Module for use with Verizon Wireless only (select models only) 490371-001 Power cord for use in North America 490371-011 Power cord for use in Australia...
  • Page 40 Spare part Description number 518436-001 Broadcom 4312 802.11/b/g/n WLAN module for use in Canada, the Cayman Islands, Guam, Puerto Rico, the U.S. Virgin Islands, and the United States 518436-002 Broadcom 4312 802.11/b/g/n WLAN module for use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cameroon, Cape Verde, the Central...
  • Page 41 537618-001 Rubber Kit for use with black and blue models only (contains 4 device feet) 537618-002 Rubber Kit for use with pink, white, and HP Mini 110 by Studio Tord Boontje models only (contains 4 device feet) 537619-001 Heat sink assembly (includes replacement thermal material)
  • Page 42 2048-MB memory module (PC2-5300, 533-MHz, DDR2) 537953-001 Keyboard for use with white HP and HP Mini 110 by Studio Tord Boontje models only in the United States 537953-031 Keyboard for use with white HP models only in the United Kingdom...
  • Page 43 Keyboard for use with white HP models only in South Korea 537953-B31 Keyboard for use with white HP models with international models 537953-BA1 Keyboard for use with white HP models only in Bosnia, Croatia, Montenegro, Serbia, and Slovenia 537953-BB1 Keyboard for use with white HP models only in Israel 537953-BG1...
  • Page 44 Display Screw Kit 571370-001 System board (includes Intel Atom N280 1.66-GHz processor, 512-KB Level 2 cache, 533-MHz front-side bus (FSB), and replacement thermal material) for use on the following model numbers only: HP: 110-1000 — 110-1099 and Compaq: 110c-1000 — 110-1099 571414-001 10.1-inch, standard-definition, AntiGlare display assembly (includes WWAN) for use with black HP models...
  • Page 45 Display Cable Kit for use with WSVGA panels only (includes display panel/webcam cable and WLAN antennas) 579576-001 Display enclosure (includes logo) for use with HP Mini 110 by Studio Tord Boontje models only 579604-001 10.1-inch, WSVGA, AntiGlare display assembly (includes WWAN) for use with black HP models only (includes...
  • Page 46 591649-001 Display enclosure (includes logo) for use with blue HP models only 591650-001 Base enclosure for use on pink, white, and HP Mini 110 by Studio Tord Boontje models only (includes 4 rubber feet) 592624-161 WWAN module for use only with Am Movil...

  • Page 47: Removal And Replacement Procedures

    Removal and replacement procedures Preliminary replacement requirements Tools required You will need the following tools to complete the removal and replacement procedures: ● Flat-bladed screwdriver ● Magnetic screwdriver ● Phillips P0 and P1 screwdrivers Service considerations The following sections include some of the considerations that you must keep in mind during disassembly and assembly procedures.

  • Page 48: Drive Handling

    Drive handling CAUTION: Drives are fragile components that must be handled with care. To prevent damage to the device, damage to a drive, or loss of information, observe these precautions: Before removing or inserting a hard drive, shut down the device. If you are unsure whether the device is off or in Hibernation, turn the device on, and then shut it down through the operating system.

  • Page 49: Grounding Guidelines

    Grounding guidelines Electrostatic discharge damage Electronic components are sensitive to electrostatic discharge (ESD). Circuitry design and structure determine the degree of sensitivity. Networks built into many integrated circuits provide some protection, but in many cases, ESD contains enough power to alter device parameters or melt silicon junctions. A discharge of static electricity from a finger or other conductor can destroy static-sensitive devices or microcircuitry.

  • Page 50: Packaging And Transporting Guidelines

    Packaging and transporting guidelines Follow these grounding guidelines when packaging and transporting equipment: ● To avoid hand contact, transport products in static-safe tubes, bags, or boxes. ● Protect ESD-sensitive parts and assemblies with conductive or approved containers or packaging. ● Keep ESD-sensitive parts in their containers until the parts arrive at static-free workstations.

  • Page 51: Equipment Guidelines

    Equipment guidelines Grounding equipment must include either a wrist strap or a foot strap at a grounded workstation. ● When seated, wear a wrist strap connected to a grounded system. Wrist straps are flexible straps with a minimum of one megohm ±10% resistance in the ground cords. To provide proper ground, wear a strap snugly against the skin at all times.

  • Page 52: Component Replacement Procedures

    Component replacement procedures This chapter provides removal and replacement procedures. There are as many as 65 screws, in 9 different sizes, that must be removed, replaced, or loosened when servicing the device. Make special note of each screw size and location during removal and replacement. Service tag When ordering parts or requesting information, provide the computer serial number and model description provided on the service tag:...

  • Page 53: Device Feet

    Device feet The device feet are adhesive-backed rubber pads, tethered to the base enclosure. Description Rubber Kit Spare part number 537618-001 Component replacement procedures...

  • Page 54: Battery

    Battery Description 6-cell lithium-polymer (Li-Pol) battery (2.55-Ah, 55-Wh) 3-cell lithium-polymer (Li-Pol) battery (2.55-Ah, 28-Wh) Before disassembling the device, follow these steps: Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the device on, and then shut it down through the operating system.

  • Page 55: Sim

    NOTE: This section applies only to device models with WWAN capability. NOTE: If there is a SIM inserted in the SIM slot, it must be removed before disassembling the computer. Be sure that the SIM is reinserted in the SIM slot after reassembling the computer. Before removing the SIM, follow these steps: Shut down the computer.

  • Page 56: Memory Module

    Memory module Description Memory module (PC2-5300, 533-MHz, DDR2) 512-MB (for use in HP Mini 110 and Compaq Mini 110 only) 1024-MB 2048-MB Before removing the memory module, follow these steps: Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the device on, and then shut it down through the operating system.
  • Page 57 Remove the memory module (2) by pulling the module away from the slot at an angle. NOTE: Memory modules are designed with a notch (3) to prevent incorrect insertion into the memory module slot. Reverse this procedure to install a memory module. Component replacement procedures...

  • Page 58: Keyboard

    Keyboard Description For use only on black and blue models with Windows operating system installed ● For use only in Brazil ● For use only in the Czech Republic ● For use only in Europe ● For use only in Finland, Norway, and Sweden ●...
  • Page 59 ● For use only in the United Kingdom ● For use only in the United States For use with white HP models only ● For use only in Bosnia, Croatia, Montenegro, Serbia, and Slovenia ● For use only in Brazil ●...
  • Page 60 ● For use only in the United Kingdom For use with white HP and HP Mini 110 by Studio Tord Boontje models only in the United States Before removing the keyboard, follow these steps: Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the device on, and then shut it down through the operating system.
  • Page 61 Remove the keyboard: Remove the 3 Phillips SP2.0×3.0 screws that secure the keyboard to the device. Turn the device right-side up, and then open the display as far as possible. Turn the device upside down, and locate the keyboard release access on the bottom of the computer, inside the battery bay.
  • Page 62 Slide the keyboard back until its top edge rests on the display assembly (2). Release the zero insertion force (ZIF) connector (1) to which the keyboard cable is attached. Disconnect the cable (2), and then remove the keyboard. Remove the keyboard. Reverse this procedure to install the keyboard.

  • Page 63: Rtc Battery

    RTC battery Description RTC battery Before removing the real-time clock (RTC) battery, follow these steps: Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the device on, and then shut it down through the operating system. Disconnect all external devices connected to the device.

  • Page 64: Mass Storage Devices

    Mass storage devices NOTE: Each hard drive spare part kit and solid-state drive spare part kit includes a cable and bracket. Description Hard drive (select models only) 320-GB, 5400-RPM 250-GB, 5400-RPM 160-GB, 7200-RPM 160-GB, 5400-RPM Hard Drive Hardware Kit Solid-state drive 64-GB 32-GB 16-GB...

  • Page 65: Hard Drive

    Use the Mylar tab to slide the assembly to the left (3) to disconnect it, and remove the assembly (4). Continue with one of the following sections for hard drive or solid-state drive replacement. Hard drive Remove the 4 Phillips SP3.0×4.0 screws (1) that secure the hard drive bracket to the hard drive. Using the Mylar tab, lift the bracket (2) away from the hard drive.
  • Page 66 Lift the solid-state drive (2) to remove it. Reverse this procedure to install a solid-state drive. Chapter 4 Removal and replacement procedures...

  • Page 67: Top Cover

    For use with white HP models only ● For use with HP Mini 110 by Studio Tord Boontje models only Before removing the top cover, follow these steps: Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the device on, and then shut it down through the operating system.
  • Page 68 Turn the device right-side up, with the front toward you. Open the device as far as possible. Remove the 8 Phillips PM2.5×7.0 screws that secure the top cover to the base enclosure. Lift the inside edge of the top cover (1) and swing it up. Then slide the top cover back slightly to rest against the display assembly (2) at an angle.
  • Page 69 Disconnect the TouchPad button board cable (2) from the system board, and then remove the top cover. Reverse this procedure to install the top cover. Component replacement procedures...

  • Page 70: Wlan Module

    WLAN module Description WLAN/Bluetooth combination module Broadcom 4312 802.11/b/g/n WLAN module For use in Canada, the Cayman Islands, Guam, Puerto Rico, the U.S. Virgin Islands, and the United States For use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cameroon, Cape Verde,...
  • Page 71 CAUTION: The WWAN module and the WLAN module are not interchangeable. To prevent an unresponsive system, replace the wireless module only with a wireless module authorized for use in the device by the governmental agency that regulates wireless devices in your country or region.

  • Page 72: Wwan Module

    Description HP un2400 Mobile Broadband Module (select models only) HP un2400 Mobile Broadband Module for use only with Verizon Wireless (select models only) WWAN module for use only in the People's Republic of China HP un2400 Mobile Broadband Module for use only in the People's Republic of China...
  • Page 73 Remove the WWAN module (3) by pulling the module away from the slot at an angle. Reverse this procedure to install the WWAN module. Component replacement procedures...

  • Page 74: Usb/Audio Board

    USB/audio board Description USB/audio board (includes cable) For use on the following model numbers only: HP: 110-1000 — 110-1099 and Compaq: 110c-1000 — 110-1099 For use on the following model numbers only: HP: 110-1100 — 110-1199 and Compaq: 110c-1100 — 110-1199 Before removing the USB/audio board, follow these steps: Shut down the computer.
  • Page 75 Reverse this procedure to install the USB/audio board. Component replacement procedures...

  • Page 76: Power/Battery Pass-Through Board

    Power/battery pass-through board Description Power/battery pass-through board For use on the following model numbers only: HP: 110-1000 — 110-1099 and Compaq: 110c-1000 — 110-1099 For use on the following model numbers only: HP: 110-1100 — 110-1199 and Compaq: 110c-1100 — 110-1199 Before removing the power/battery pass-through board, follow these steps: Shut down the device.
  • Page 77 Remove the power/battery pass-through board (3). Reverse this procedure to install the power/battery pass-through board. Component replacement procedures...

  • Page 78: Fan

    Description NOTE: To properly ventilate the device, allow at least a 7.6-cm (3-inch) clearance on the left side of the device. The device uses an electric fan for ventilation. The fan is controlled by a temperature sensor and is designed to turn on automatically when high temperature conditions exist. These conditions are affected by high external temperatures, system power consumption, power management/battery conservation configurations, battery fast charging, and software requirements.
  • Page 79 Remove the fan (3). Reverse this procedure to install the fan. Component replacement procedures...

  • Page 80: Heat Sink Assembly

    Heat sink assembly Description Heat sink assembly (includes replacement thermal material) Before removing the heat sink assembly, follow these steps: Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the device on, and then shut it down through the operating system. Disconnect all external devices connected to the device.
  • Page 81 Remove the heat sink assembly (2). NOTE: Due to the adhesive quality of the thermal material located between the heat sink assembly and system board components, it may be necessary to move the heat sink assembly from side to side to detach the assembly. NOTE: The thermal material must be thoroughly cleaned from the surfaces of the heat sink assembly and the system board each time the heat sink assembly is removed.

  • Page 82: System Board

    System board (includes processor and replacement thermal material) Includes Intel Atom N280 1.66-GHz processor, 512-KB Level 2 cache, 533-MHz front-side bus (FSB) For use on the following model numbers only: HP: 110-1000 — 110-1099 and Compaq: 110c-1000 — 110-1099 Includes Intel Atom N270 1.6-GHz processor, 512-KB Level 2 cache, 533-MHz front-side bus (FSB) For use on the following model numbers only: HP: 110-1000 —...
  • Page 83 Remove the system board: Release the tape securing the WWAN antennas (1). Disconnect the following cables from the system board: (2) Display panel cable (3) Microphone cable (4) Speaker cable (5) WLAN cables (6) WWAN cables (select models only) Remove the 2 Phillips PM1.5×2.0 screws (1) that secure the actuators for the power switch and wireless on/off switch to the system board.
  • Page 84 Remove the 3 Phillips PM2.5×5.0 screws that secure the system board to the base enclosure. Grasp the system board at the midpoint of the left side (1), and lift it up. Pull the system board (2) out to the left at an angle to remove it. Remove the system board.

  • Page 85: Display Assembly

    ● 10.1-inch, high-definition, AntiGlare display assembly (includes WWAN) ● 10.1-inch, WSVGA, AntiGlare display assembly (includes WWAN) For use with HP Mini 110 by Studio Tord Boontje models only ● 10.1-inch, high-definition, AntiGlare display assembly (includes WWAN) ● 10.1-inch, standard-definition, AntiGlare display assembly (includes WWAN) ●...
  • Page 86 For use with pink HP models only For use with white HP models only For use with blue HP models only For use with HP Mini 110 by Studio Tord Boontje models only For use with Compaq models only Display Screw Kit (not illustrated) Before removing the display assembly, follow these steps: Shut down the device.
  • Page 87 If your device has WWAN capability, remove the SIM (see Remove the following components: Keyboard (see Keyboard on page Hard drive or solid-state drive (see Top cover (see Top cover on page Remove the display assembly: Release the tape securing the WWAN antennas (1). Disconnect the following cables from the system board: (2) Display panel cable (3) Microphone cable...
  • Page 88 Remove the display assembly (3). If it is necessary to replace the display bezel, perform the following steps: Remove the display hinge covers (1). Flex the inside edges of the top and bottom (2), and then the left and right sides (3) of the display bezel until the bezel disengages from the display enclosure.
  • Page 89 If it is necessary to replace the display panel, perform the following steps: Remove the 7 Phillips PM2.0×3.0 screws that secure the display panel to the display enclosure. Lift the display panel up from the display enclosure (1). Disconnect the webcam cable (2) from the system board (2) Remove the display panel (3) from the display enclosure.
  • Page 90 Remove the speaker assembly (2). If it is necessary to replace the display hinges, perform the following steps: Remove the 2 Phillips PM2.0×3.0 screws (1) that secure each hinge to the display enclosure. Remove the hinges (2). If it is necessary to replace the display panel cable, perform the following steps: Peel back the Mylar protection on the back of the display panel (1).
  • Page 91 Disconnect the display panel cable (2). If it is necessary to replace the webcam module, perform the following steps: Disconnect the webcam cable (1) from the webcam. Remove the webcam (2). If it is necessary to replace the microphone receiver, perform the following steps: Release the microphone receiver from the clip (1) that secures it to the display enclosure.
  • Page 92 Pull the receiver through the tabs (2), and remove the microphone receiver (3). If it is necessary to replace the wireless antenna transceivers and cables, detach the cables from the adhesive (1) that secures them to the display enclosure, and then remove the cables (2). Reverse this procedure to reassemble and install the display assembly.

  • Page 93: Setup Utility

    Setup Utility Starting the Setup Utility The Setup Utility is a ROM-based information and customization utility that can be used even when your operating system is not working. The utility reports information about the device and provides settings for startup, security, and other preferences.

  • Page 94: Displaying System Information

    ● To select an item, press enter. ● To close a text box or return to the menu display, press esc. ● To display additional navigation and selection information while the Setup Utility is open, press Displaying system information The following procedure explains how to display system information in the Setup Utility. If the Setup Utility is not open, begin at step 1.

  • Page 95: Setup Utility Menus

    Setup Utility menus The menu tables in this section provide an overview of Setup Utility options. NOTE: Some of the Setup Utility menu items listed in this chapter may not be supported by your device. Main menu Select System information Security menu Select Administrator password...

  • Page 96: Diagnostics Menu

    Diagnostics menu Select Hard Disk Self Test (select models only) Memory Test Chapter 5 Setup Utility To do this Run a comprehensive self-test on the hard drive. Run a diagnostic test on the system memory.

  • Page 97: Specifications

    Specifications Device specifications Dimensions Depth Width Height Weight 10.1-in. LCD, equipped with a 3-cell battery, hard drive, 1-GB memory, WLAN module, and 2 wireless antennas 10.1-in. LCD, equipped with a 3-cell battery,solid-state drive, 1-GB memory, WLAN module, and 2 wireless antennas Input power Operating voltage Operating current...

  • Page 98: 10.1-Inch, Antiglare Display Specifications

    10.1-inch, AntiGlare display specifications Dimensions Height Width Diagonal Number of colors Contrast ratio Brightness Pixel resolution Pitch Format Configuration Backlight Character display Total power consumption Viewing angle Chapter 6 Specifications Metric U.S. 23.45 cm 9.23 in 14.30 cm 5.62 in 25.55 cm 10.05 in 262,144...

  • Page 99: 10.1-Inch, Wsvga, Antiglare Display Specifications

    10.1-inch, WSVGA, AntiGlare display specifications Dimensions Height Width Diagonal Number of colors Contrast ratio Brightness Pixel resolution Pitch Format Configuration Backlight Character display Total power consumption Viewing angle Metric U.S. 12.53 cm 4.93 in 22.27 cm 8.77 in 25.55 cm 10.06 in 262,144 400:1 (typical)

  • Page 100: Hard Drive Specifications

    Hard drive specifications Dimensions Height Width Weight Interface type Transfer rate Security Seek times (typical read, including setting) Single track Average Maximum Logical blocks Disc rotational speed Operating temperature * 1 GB = 1 billion bytes when referring to hard drive storage capacity. Actual accessible capacity is less. Actual drive specifications may differ slightly.

  • Page 101: Solid-State Drive Specifications

    Solid-state drive specifications Performance Transfer modes supported Sustained read Sustained write Characteristics Interface MLC NAND flash capacity Electrical specifications DC supply voltage Standby current Active current Environmental specifications Operating temperature Storage temperature Operating altitude Humidity Shock Acoustic noise Vibration Physical specifications Connector Weight (8-GB model) Weight (16-GB model)

  • Page 102: System Dma Specifications

    System DMA specifications Hardware DMA DMA0 DMA1* DMA2* DMA3 DMA4 Chapter 6 Specifications System function Not applicable Not applicable Not applicable Not applicable Direct memory access controller...

  • Page 103: System Interrupt Specifications

    System interrupt specifications Hardware IRQ IRQ0 IRQ1 IRQ8 IRQ9 * IRQ12 IRQ13 IRQ14 IRQ15 IRQ16 IRQ17 IRQ18 IRQ19 IRQ23 * Default configuration System function System timer Standard 101-/102-Key or Microsoft® Natural PS/2 Keyboard System CMOS/real-time clock Microsoft ACPI-compliant system Synaptics PS/2 TouchPad Numeric data processor Primary IDE channel Intel®...

  • Page 104: System I/O Address Specifications

    System I/O address specifications I/O address (hex) 000 - 00F 000 - CF7 010 - 01F 020 - 021 022 - 03F 040 - 043 044 - 05F 060 - 060 061 - 061 062 - 062 063- 063 064 - 064 065 - 065 066 - 066 067 - 06F...
  • Page 105 I/O address (hex) System function (shipping configuration) 279 - 279 ISAPNP Read Data Port 3B0 - 3BB Mobile Intel® 945 Express Chipset Family 3C0 - 3DF Mobile Intel 945 Express Chipset Family 3F6 - 3F6 Primary IDE channel 400 - 41F Intel 82801G (ICH7 Family) SMBus Controller—27DA 480 - 4BF Motherboard resources...

  • Page 106: System Memory Map Specifications

    System memory map specifications Memory address 00000000 - 0009FFFF 000A0000 - 000BFFFF 000A0000 - 000BFFFF 000C0000 - 000CFFFF 000D0000 - 000DFFFF 000E0000 - 000FFFFF 00100000 - 3F7FFFFF 3F800000 - DFFFFFFF D0000000 - DFFFFFFF E0000000 - E3FFFFFF E4000000 - FED8FFFF FE880000 - FE8FFFFF FE937C00 - FE937FFF FE938000 - FE93BFFF FE940000 - FE97FFFF...

  • Page 107: Screw Listing

    Screw listing This section provides specification and reference information for the screws and screw locks used in the device. All screws listed in this section are available in the Screw Kit, spare part number 537620-001; or in the Display Screw Kit, spare part number 538510-001. Phillips PM1.5×1.0 screw Color Quantity...
  • Page 108 Where used: Two screws that secure the power and wireless switch actuators to the base enclosure Chapter 7 Screw listing...

  • Page 109: Phillips Pm2.0×3.0 Screw

    Phillips PM2.0×3.0 screw Color Quantity Black Where used: 3 screws that secure the keyboard to the device Where used: Four screws that secure the solid-state drive to the bracket Length Thread 3.0 mm 2.0 mm Head diameter 4.0 mm Phillips PM2.0×3.0 screw...
  • Page 110 Where used: Seven screws that secure the display panel to the display enclosure Where used: Three screws that secure the speaker assembly to the display enclosure Where used: Four screws that secure the hinges to the display panel 100 Chapter 7 Screw listing...

  • Page 111: Phillips Pm2.0×3.0 Captive Screw

    Phillips PM2.0×3.0 captive screw Color Quantity Black Length Thread 3.0 mm 2.0 mm Phillips PM2.0×3.0 captive screw 101 Head diameter 4.0 mm...

  • Page 112: Phillips Pm2.0×4.0 Screw

    Phillips PM2.0×4.0 screw Color Silver Where used: Two screws that secure the WLAN module to the system board Where used: Two screws that secure the WWAN to the system board 102 Chapter 7 Screw listing Quantity Length 4.0 mm Thread Head diameter 2.0 mm 4.0 mm...

  • Page 113: Phillips Pm2.0×5.0 Screw

    Phillips PM2.0×5.0 screw Color Quantity Silver Where used: Two screws that secure the hard drive or solid-state drive to the system board Where used: One screw that secures the top cover to the base enclosure Length Thread 5.0 mm 2.0 mm Head diameter 4.5 mm Phillips PM2.0×5.0 screw 103...

  • Page 114: Phillips Pm2.5×5.0 Screw

    Phillips PM2.5×5.0 screw Color Silver Where used: Two screws that secure the power/battery pass-through board to the system board Where used: Four screws that secure the display assembly and top cover to the device 104 Chapter 7 Screw listing Quantity Length 5.0 mm Thread...
  • Page 115 Where used: Two screws that secure the fan to the system board Where used: Three screws that secure the system board to the base enclosure Where used: Four screws that secure the display assembly to the base enclosure Phillips PM2.5×5.0 screw 105...

  • Page 116: Phillips Pm2.5×7.0 Screw

    Phillips PM2.5×7.0 screw Color Black Where used: Four screws that secure the top cover to the base enclosure Where used: Eight screws that secure the top cover to the base enclosure 106 Chapter 7 Screw listing Quantity Length 7.0 mm Thread Head diameter 2.5 mm...

  • Page 117: Phillips Pm2.5×10.0 Captive Screw

    Phillips PM2.5×10.0 captive screw Color Quantity Black Where used: One captive screw, with a C-clip, that secures the hard drive or solid-state drive bracket to the system board Length Thread 10.0 mm 2.5 mm Phillips PM2.5×10.0 captive screw 107 Head diameter 4.0 mm...

  • Page 118: Phillips Pm3.0×4.0 Screw

    Phillips PM3.0×4.0 screw Color Black Where used: Four screws that secure the hard drive bracket to the hard drive 108 Chapter 7 Screw listing Quantity Length 4.0 mm Thread Head diameter 3.0 mm 4.0 mm...

  • Page 119: Backup And Recovery

    Backup and recovery Select the section in this chapter that applies to the operating system installed on your computer.

  • Page 120: Mobile Mi Backup And Recovery

    ● HP Mi Restore Image Creator (USB flash drive): If you are unable to boot (start up) the device, and if you are unable to use System Restore, you can use another computer to download the HP Mi Restore Image Creator utility and create a bootable USB flash drive (purchased separately).

  • Page 121: Using System Restore

    Using HP Mi Restore Image Creator NOTE: Use HP Mi Restore Image Creator if you are unable to boot (start up) the device, and if you are unable to use System Restore. You will need the following before you begin this restore process: ●...

  • Page 122: Restoring Using A Linux Computer

    Restore your personal files. NOTE: After this process is complete, you can uninstall the HP Mi Restore Image Creator utility from the Windows computer and delete the downloaded recovery image from the USB flash drive. (The image must be deleted manually.)
  • Page 123 Restore your personal files. NOTE: After this process is complete, you can uninstall the HP Mi Restore Image Creator utility from the Linux computer and delete the downloaded recovery image from the USB flash drive. (The image must be deleted manually.)

  • Page 124: Windows 7 Backup And Recovery

    In the event of a hard drive failure, you cannot use your computer to access the Disaster Recovery utility. Therefore, HP recommends that you download the Disaster Recovery utility SoftPaq, and then extract it to a USB flash drive as soon as possible after software setup. For details, refer to “Downloading and extracting the Disaster Recovery utility”...

  • Page 125: Performing A Recovery

    For optimum performance, the capacity of the drive should be no larger than 2 GB. Disaster Recovery recovers data from a Disaster Recovery Set that you previously created with Roxio BackOnTrack. Disaster Recovery is available from the HP Web site in a compressed file called a SoftPaq.

  • Page 126: Restoring Your Hard Drive Image

    Enter the SoftPaq number SP42226 in the Search box, press enter, and then follow the on-screen instructions. Select Download only to save the file to your computer. When prompted, select Save, and then select the external drive from the list of storage locations. After the file is downloaded, navigate to the USB flash drive or external drive, and then double- click the SoftPaq file to format the USB flash drive and extract the Disaster Recovery files.

  • Page 127: Using The Instant Restore Utility When The Operating System Is Not Functioning

    If the operating system has stopped responding and the computer screen is blue, restart the computer by turning the power switch off and then on. When the computer logo (HP or Compaq) is displayed on the screen, press the until the Windows status bar is displayed.

  • Page 128: Restoring To A Previous Date And Time

    Follow the on-screen instructions. Backing up and recovering using HP Recovery Manager If your computer includes HP Recovery Manager, tools provided by the operating system and by HP Recovery Manager software are designed to help you with the following tasks for safeguarding your information and restoring it in case of a system failure: ●...

  • Page 129: Creating A Set Of Recovery Discs

    Creating a set of recovery discs HP recommends that you create recovery discs to be sure that you can restore your system to its original factory state if you experience serious system failure or instability. Create these discs after setting up the computer for the first time.

  • Page 130: Performing A Recovery

    Performing a recovery NOTE: You can recover only files that you have previously backed up. HP recommends that you use Recovery Manager to create a set of recovery discs (entire drive backup) as soon as you set up your computer.
  • Page 131 NOTE: It may take several minutes for Recovery Manager to load. In the Recovery Manager window, select System Recovery. Follow the on-screen instructions. Windows 7 backup and recovery 121...

  • Page 132: Windows Vista Backup And Recovery

    Windows Vista backup and recovery Use the instructions in this section if Windows Vista is installed on your computer. Backing up your information Recovery after a system failure is as complete as your most current backup. You should create your initial backup immediately after software setup.

  • Page 133: Performing A Recovery

    NOTE: Windows® includes the User Account Control feature to improve the security of your computer. You may be prompted for your permission or password for tasks such as installing software, running utilities, or changing Windows settings. Refer to Help and Support for more information.

  • Page 134: Using The Windows Recovery Tools

    If possible, back up all personal files. If possible, check for the presence of the Windows partition and the HP Recovery partition. To find the partitions, select Start > Computer. NOTE:...

  • Page 135: Using F11

    Using have created and any software installed on the computer are permanently removed. The tool reinstalls the operating system and HP programs and drivers that were installed at the factory. Software not installed at the factory must be reinstalled. To recover the original hard drive image using f11, follow these steps: If possible, back up all personal files.

  • Page 136: Windows Xp Backup And Recovery

    NOTE: For detailed instructions, perform a search for these topics in Help and Support. NOTE: In case of system instability, HP recommends that you print the recovery procedures and save them for later use. Backing up your information Recovery after a system failure is as complete as your most current backup. You should create your initial backup immediately after software setup.

  • Page 137: Performing A Recovery

    The recovery process reinstalls the original operating system, software, and drivers. Software, drivers, and updates not installed by HP must be manually reinstalled. To recover your operating system and programs, follow these steps: If possible, back up all personal files.

  • Page 138: Connector Pin Assignments

    Connector pin assignments Audio-in (microphone) 128 Chapter 9 Connector pin assignments Signal Audio signal in Audio signal in Ground...

  • Page 139: Audio-Out (Headphone)

    Audio-out (headphone) Signal Audio out, left channel Audio out, right channel Ground Audio-out (headphone) 129...

  • Page 140: External Monitor

    External monitor 130 Chapter 9 Connector pin assignments Signal Red analog Green analog Blue analog Not connected Ground Ground analog Ground analog Ground analog +5 VDC Ground Monitor detect DDC 2B data Horizontal sync Vertical sync DDC 2B clock...

  • Page 141: Network)

    RJ-45 (network) Signal Transmit + Transmit - Receive + Unused Unused Receive - Unused Unused RJ-45 (network) 131...

  • Page 142: Universal Serial Bus

    Universal Serial Bus 132 Chapter 9 Connector pin assignments Signal +5 VDC Data - Data + Ground...

  • Page 143: 10 Power Cord Set Requirements

    10 Power cord set requirements The wide range input feature of the device permits it to operate from any line voltage from 100 to 120 volts AC or from 220 to 240 volts AC. The 3-conductor power cord set included with the device meets the requirements for use in the country or region where the equipment is purchased.

  • Page 144: Requirements For Specific Countries And Regions

    Requirements for specific countries and regions Country/region Australia Austria Belgium Canada Denmark Finland France Germany Italy Japan The Netherlands Norway The People's Republic of China South Korea Sweden Switzerland Taiwan The United Kingdom The United States The flexible cord must be Type HO5VV-F, 3-conductor, 1.0-mm² conductor size. Power cord set fittings (appliance coupler and wall plug) must bear the certification mark of the agency responsible for evaluation in the country or region where it will be used.

  • Page 145: 11 Recycling

    When you remove these components, handle them carefully. NOTE: Materials Disposal. This HP product contains mercury in the backlight in the display assembly that might require special handling at end-of-life. Disposal of mercury may be regulated because of environmental considerations. For disposal or recycling information, contact your local authorities, or see the Electronic Industries Alliance (EIA) Web site at http://www.eiae.org.
  • Page 146 Perform the following steps to disassemble the display assembly: Remove all screw covers (1) and screws (2) that secure the display bezel to the display assembly. Lift up and out on the left and right inside edges (1) and the top and bottom inside edges (2) of the display bezel until the bezel disengages from the display assembly.
  • Page 147 Disconnect all display panel cables (1) from the display inverter and remove the inverter (2). Remove all screws (1) that secure the display panel assembly to the display enclosure. Remove the display panel assembly (2) from the display enclosure. Turn the display panel assembly upside down. Remove all screws that secure the display panel frame to the display panel.
  • Page 148 Remove the display panel frame (2) from the display panel. Remove the screws (1) that secure the backlight cover to the display panel. Lift the top edge of the backlight cover (2) and swing it outward. Remove the backlight cover. Turn the display panel right-side up.
  • Page 149 Remove the backlight cables (1) from the clip (2) in the display panel. Turn the display panel upside down. WARNING! The backlight contains mercury. Exercise caution when removing and handling the backlight to avoid damaging this component and causing exposure to the mercury. Remove the backlight frame from the display panel.
  • Page 150 Remove the backlight from the backlight frame. Disconnect the display panel cable (1) from the LCD panel. Remove the screws (2) that secure the LCD panel to the display rear panel. Release the LCD panel (3) from the display rear panel. Release the tape (4) that secures the LCD panel to the display rear panel.

  • Page 151: Index

    Index AC adapter, spare part number 28 administrator password 85 antenna removal 82 spare part number 25, 76 antennas 15 applications key, Windows 7 audio, product description 2 audio-in (microphone) jack 12 audio-out (headphone) jack 12 audio-in jack pin assignments 128 audio-out jack pin assignments 129 Backup and Restore Center 122...
  • Page 152 70 spare part number 70 hinge covers illustrated 25, 75 spare part number 25, 75 Home key 8 HP Mi Restore Image Creator identifying 110 using 111 I/O address specifications 94 internal display switch, identifying 13 internal media cards, product...
  • Page 153 Program Switcher key 8 recovery partition 125 release latches battery 14 removal/replacement preliminaries 37 procedures 42 restoring HP Mi Restore Image Creator 111 System Restore 111 restoring default settings 84 restoring the hard drive 125 right TouchPad button, identifying 5 RJ-45 (network) jack,...
  • Page 154 WWAN module removal 62 spare part number 62 144 Index...

This manual is also suitable for:

Mini 1101Compaq mini 110c-1001Compaq mini 110c-1040Compaq mini 110c-1100Mini 110-1090Mini 110-1109 ... Show all

Table of Contents