Stand Parts and Cables Remote Control SEARCH KEYPAD SOURCE VOICE RETURN GUIDE EXIT SMART HUB CH.LIST P.SIZE MENU INFO Samsung Smart Batteries Base Stand Mount Control (2 AA) (x8) Also included Screws Power Cord Cable Holder • User manual (x4) •...
Page 2
Assemble Locate the Base, Stand Mount, and Locate the TV on a soft surface, Screws in the box and set them screen side down. Use the aside. Styrofoam to protect the screen. Remove the top portion of the ✎ box to locate the stand parts. Fit the Base and Stand Mount Insert 4 screws, and then use a together, making sure the notch...
Page 3
Holding the stand parallel to the screen, slide the Mount into the notches on the back of the TV. Insert 4 screws, and then use a screwdriver to secure the stand to the TV. 40 - 55 inches models: x4 (M4 X L12) 60 inches and above models: x4 (M4 X L10) Attach the cable holder to the back of the stand.
Page 4
Connect * Recommended Connections After you have connected all your external devices, plug the TV’s power cord into the back Connection panel on of the TV. DO NOT plug it into the back of the TV a wall outlet until you have reached Section 7, Initial Setup.
Gear * Recommended Connections Blu-ray/DVD/Home Theater Connect your video player using an HDMI cable. Game console Connect your game console or DVR using an HDMI cable. Audio Connect a receiver/home theater using an optical audio cable. [UH6400-QSG]BN68-05869A-01ENG.indb 5 2014-02-24 5:30:24...
Page 6
STB Control You can control your set-top-box or satellite box with the Samsung Smart Control. To establish control, you must first set up the IR extender cable. If you don’t have an STB, skip this section. Connect the IR extender cable to the TV’s IR output connector.
Using the Samsung Smart Control When you start the TV for the first time by pressing the TV button on the Samsung Smart Control, the TV and the Samsung Smart Control pair, using the TV’s Bluetooth function.
Page 8
If you need to re-establish the connection between the TV and the Samsung Smart Control, point the Samsung Smart Control at the remote control sensor of the TV, and then press the RETURN button and GUIDE button simultaneously for 3 seconds.
Once your Samsung Smart Control pairs, you can use the Samsung Smart Control’s motion sensor function to move the pointer on the screen. To use the motion sensor function, rest a finger on the touch pad, and then move the Samsung Smart Control. To select items, press the touch pad.
Common issues Can’t Connect to Network or “Weak or No Signal” Displayed in Apps (For Internet supported TV Mode/Cannot Find Channel model only) • Press the SOURCE button on your • Make sure the TV has a network remote. connection (MENU > Network > •...
If you experience issues, please do not take the TV back to the store. In the United States of America, call us at 1-800-SAMSUNG (1-800-726-7864) or visit us at www.samsung.com or www.samsung.com/spsn for support and warranty service.