Advertisement
Quick Links
DP 6000 DIGITAL PAGING SYSTEM
1. GENERAL
This installation instruction covers the following four paging
transceivers:
-
LBB 6063/xx Gen. III
-
LBB 6064/xx Gen. III
-
LBB 6065/xx Gen. III
-
LBB 6066/xx Gen. III
The stroke numbers are used for different versions of the
transceivers. For an overview of the available functions refer to
Tables 1, 2 and 3.
TABLE 1
TABLE 2
TABLE 3
Philips
Communication &
Security Systems
LBB 6063, LBB 6064, LBB 6065, LBB 6066
Transceiver
Transceiver with dial keypad
PS 6000 transceiver
PS 6000 transceiver with dial
keypad
Function table LBB 6063, Generation III Talk-back transceiver
LBB 6063/.
5 digit numeric display
Alpha display (24 character)
Connector for external
mic/loudspeaker.
Function table LBB 6064,
Generation III Talk-back transceiver with dial key-pad
LBB 6064/.
5 digit numeric display
Alpha display
Connector for external
mic/loudspeaker.
Function table LBB 6065, Generation III PS 6000 Transceiver and LBB 6066,
Generation III PS 6000 Transceiver with dial key-pad
LBB 6065/.. & LBB 6066/..
Numeric + Alpha display
Manual - No move - Tilt -
Fast move - Alarms
Tear-off Alarm
Connector for external
mic/loudspeaker.
Location detection
* Not deliverable as from 01-0-98
INSTALLATION
INSTRUCTIONS
DP 6000 Generation III Transceivers
On delivery the transceivers are without HF transmitter and
receiver section. These sections should be ordered separately
and are available with the following type numbers:
-
LBB 6112/xx
-
LBB 6012/xx
-
LBB 6113/xx
-
LBB 6013/xx
The main section of this installation instruction describes the
installation and programming of transceivers with dual display
(i.e numeric display located on top of the transceiver and an
alphanumeric display located on the side of the transceiver).
The installation and programming of the LBB 6063/02 (no dis-
play) and LBB 6063/04 (numeric display only) are described in a
separate section at the rear of this installation instruction.
/00
/02
/04
/00
/09
/08
/07
/00
/06
February1997, Page 1 of 29
VHF receiver HF section
UHF receiver HF section
VHF talk-back transmitter HF section
UHF talk-back transmitter HF section
/09
/09*
/10*
83
Advertisement
Related Manuals for Philips LBB 6063
Summary of Contents for Philips LBB 6063
- Page 1 The installation and programming of the LBB 6063/02 (no dis- play) and LBB 6063/04 (numeric display only) are described in a separate section at the rear of this installation instruction. Function table LBB 6063, Generation III Talk-back transceiver TABLE 1 LBB 6063/.
- Page 2 5. Numeric message memory <Recall> and <Reset> button 6. Chain securing attachment 7. Connection cover for external unit (available with versions LBB 6063/09, LBB 6064/09, LBB 6065/08 & /09 and LBB 6066/08 & /09 only) 8. Scroll buttons (up/down to scroll menu options and...
- Page 3 INSTALLATION INSTRUCTION 83 DP 6000 DIGITAL PAGING SYSTEM Page 3/29 February 1997 memory stack (0-9) 2.1 MOUNTING Fig.2 To open the transceiver a special TORX (TM) type screw driver (TX8) should be used. Mount the HF receiver and transmitter as follows: 1.
- Page 4 DP 6000 DIGITAL PAGING SYSTEM INSTALLATION INSTRUCTION 83 February 1997 Page 4/29 Fig.6 Transceiver with receiver, transmitter, tilt Fig.5 Transceiver without receiver, transmitter alarm module and location receiver or external and tilt alarm module mic./loudspeaker connection PCB. connection to numeric LCD loudspeaker connection Aerial securing...
-
Page 5: Switching On And Off
DP 6000 DIGITAL PAGING SYSTEM INSTALLATION INSTRUCTION 83 Page 5/29 February 1997. 2.2 BATTERIES 2.3 SWITCHING ON AND OFF The transceiver is powered by three rechargeable or dispos- In normal operation and when programmed for ‘new system able LR1 type batteries. To select the required battery type, mode’... -
Page 6: Functional Overview
If the function is ‘Optional’ then there are versions of the type number available with the function. DP6000 GENERATION III LBB 6066 LBB 6065 LBB 6063 LBB 6064 PS + Dial TRANSCEIVERS FUNCTIONAL OVERVIEW Dial Splash waterproof according IP64... - Page 7 DP 6000 DIGITAL PAGING SYSTEM INSTALLATION INSTRUCTION 83 Page 7/29 February 1997. 2.5 TRANSCEIVER ADDRESSES 2.6 BLEEP PATTERNS The transceiver has a total of 8 addresses, 7 of which may be Seven different call tone patterns can be produced in two dif- programmed : ferent tones (see fig.
- Page 8 DP 6000 DIGITAL PAGING SYSTEM INSTALLATION INSTRUCTION 83 February 1997 Page 8/29 2.7 PERSONAL BLEEP PATTERNS 1 & 2 EXAMPLE 2: (Refer to Fig. 13) The transceiver can be programmed to give a specially designed In the diagram shown in Fig. 13 a bleep pattern is shown where bleep pattern.
- Page 9 INSTALLATION INSTRUCTION 83 DP 6000 DIGITAL PAGING SYSTEM Page 9/29 February 1997. 1.06 Seconds Fig. 8 133 msecs. Operation code 2/3 Operation code 2/3 Digit Q Digit P Fig. 9 1.06 Seconds 1.06 Seconds 1.06 Seconds 1.06 Seconds 133 msecs 2886 Hz.
- Page 10 DP 6000 DIGITAL PAGING SYSTEM INSTALLATION INSTRUCTION 83 February 1997 Page 10/29 3. PROGRAMMING TRANSCEIVER When the PC Alpha Desk software is used to program the AND USER FUNCTIONS transceiver’s addresses, these system calls are generated auto- matically. Because the transceiver is microprocessor controlled, it is pro- grammed via software.
- Page 11 DP 6000 DIGITAL PAGING SYSTEM INSTALLATION INSTRUCTION 83 Page 11/29 February 1997. ADDRESS PROGRAMMING VIA THE PROGRAMMING to each digit is as follows (for a more in-depth description of KEYBOARD OF LBB 5840 TELEPHONE COUPLER: the opcodes, refer to Chapter 3.4): First individual address, press OPCODE 1 C/CCC0/1/A/A3/A2/A1/A0 (to program address 1)
-
Page 12: User Functions
DP 6000 DIGITAL PAGING SYSTEM INSTALLATION INSTRUCTION 83 February 1997 Page 12/29 3.2 USER FUNCTIONS The operation code can be programmed into the transceiver The transceiver user programming is fully menu driven and can by transmitting a paging system call (wireless via the system be accessed as follows: transmitter or wired while the transceiver is stored in its stor- age rack). - Page 13 Depending on the stroke- and type number the following set- FUNCTIONS tings are possible on all transceivers except the LBB 6063/02 and LBB 6063/04. Note that in order for these options to be 3.3.1 OPCODE 1 made available, they must been enabled using opcode program- Receiver status (Opcode 1 P) ming.
- Page 14 DP 6000 DIGITAL PAGING SYSTEM INSTALLATION INSTRUCTION 83 February 1997 Page 14/29 If field call is enabled the transceiver holder can make a call RSSI-LEVEL (OPCODE 1 U) from the field to a central desk by pressing the PTT button. For Opcode digit 1 U sets the level of the squelch detector in the PS transceivers, the field call is controlled by a handshake pro- transceiver.
- Page 15 INSTALLATION INSTRUCTION 83 DP 6000 DIGITAL PAGING SYSTEM Page 15/29 February 1997. acknowledge, should be set in the opcode digit ‘3 U’ (default always be present at the paging central control. This is due to value = 4). If a call is detected on one of the personal addresses the transceiver not responding to check calls (automatically or with this assigned bleep-pattern, and the transceiver is pro- manually).
- Page 16 DP 6000 DIGITAL PAGING SYSTEM INSTALLATION INSTRUCTION 83 February 1997 Page 16/29 3.3.4 OPCODE 5 3.4 TABLE OF PILOT TONE FREQUENCIES (OPCODE 5 P) FAST MOVE LEVEL SETTING With operation codes 2 and 3 the following pilot tones can be With opcode digit 5 P the sensitivity of the fast move detector programmed: can be adjusted.
-
Page 17: Software Programming
Press the up/down keys until the display shows: “LANGUAGE”. Press the ENTER key. Transceiver Display Functionality Display shows: ENGLISH LBB 6063/02 or /04* TB_ND (Talk-back no display) Press the down key for the following languages: LBB 6063 (Talk-back) GERMAN LBB 6064... - Page 18 DP 6000 DIGITAL PAGING SYSTEM INSTALLATION INSTRUCTION 83 February 1997 Page 18/29 SHOW OPCODE To move to another monitor function, press the up/down keys Press the up/down keys until the display shows until the required function is shown in the display. “SHOW OPCODE”.
- Page 19 INSTALLATION INSTRUCTION 83 DP 6000 DIGITAL PAGING SYSTEM Page 19/29 February 1997. SERIAL COMM. - ALARM TEST The transceiver has been prepared to enable it to download The alarm test is used to test the available alarm functions. (PS new software and settings by using the Transceiver Tools soft- versions only) The alarms are tested as follows and in this ware package and the RS232 transceiver interface unit (Porteq sequence:...
- Page 20 DP 6000 DIGITAL PAGING SYSTEM INSTALLATION INSTRUCTION 83 February 1997 Page 20/29 The following tables show the default values of each function and a box is provided so that the installer can enter the value set. At the end of the table the complete 6 opcodes can be entered.
- Page 21 INSTALLATION INSTRUCTION 83 DP 6000 DIGITAL PAGING SYSTEM Page 21/29 February 1997. OPERATION CODE 2 Default valueValue set Personal bleep 1 Personal bleep Pattern 1, on/off on/off setting Setting (See figs 8 to 12 ) Personal bleep 1 Personal bleep Pattern 1, on/off on/off setting Setting (See figs 8 to 12 ) = HEX F...
- Page 22 DP 6000 DIGITAL PAGING SYSTEM INSTALLATION INSTRUCTION 83 February 1997 Page 22/29 OPERATION CODE 3 Default valueValue set Personal bleep 2 Personal bleep Pattern 2, on/off on/off setting Setting (See figs 8 to 12 ) = HEX B Personal bleep 2 on/off setting Personal bleep Pattern 2, on/off Setting (See figs 8 to 12 )
- Page 23 INSTALLATION INSTRUCTION 83 DP 6000 DIGITAL PAGING SYSTEM Page 23/29 February 1997. OPERATION CODE 4 Default valueValue set Indication status Bleep until reset Low battery enabled Out of range enabled Personal bleep enabled (Personal bleep 1 will sound when codinf 1 is received). Personal bleep 2 will sound when codinf 2 is received.) User Program status Bleep sign on...
- Page 24 DP 6000 DIGITAL PAGING SYSTEM INSTALLATION INSTRUCTION 83 February 1997 Page 24/29 OPERATION CODE 5 Default valueValue set Fast move level (range 0 - F) (see description page 11) Turn on time no-move / angle alarm (0 - F, steps of 5 seconds) Turn on time fast move alarm (0 - F, steps of 1 second) Pre-alarm time, no-move /angle alarm...
- Page 25 INSTALLATION INSTRUCTION 83 DP 6000 DIGITAL PAGING SYSTEM Page 25/29 February 1997. OPERATION CODE 6 Default valueValue set Fast charge time (0 - F, steps of 15 mins) Power off enabled/disabled Not used Not used Not used Not used Not used Not used Not used...
- Page 26 DP 6000 DIGITAL PAGING SYSTEM INSTALLATION INSTRUCTION 83 February 1997 Page 26/29 TOTAL VALUES OF OPCODES INSTALLED P Q R S T U Opcode 1. Opcode 2. Opcode 3. Opcode 4. Opcode 5. 0 0 0 0 Opcode 6.
- Page 27 February 1997. TRANSCEIVER VERSIONS LBB 6063/02 and LBB 6063/04 The following section describes the installation and program- ming of the LBB 6063/02 (no display) and the LBB 6063/04 (numeric display only) INTRODUCTION The paging transceiver has three main functions: 1. To alert the transceiver carrier when called with one of 14 different bleep patterns.
- Page 28 If not, a bleep until reset signal is generated. LBB 5312/00 Philips LR1 size (alkaline) LBB 5931/02 Philips LR1 size (re-chargeable) Note: The ‘switch-off’ function can be disabled by the installer.
- Page 29 Special software and a connector is available via the service channels (refer also to the service documentation of the trans- ceivers or contact your local Philips service organisation). To enable this function press the <Press-to-talk> key while pressing the <Light> key.