Page 1
LCD-TV Chassis : N90A Model : LA32C630* LA32C650* LA40C630* LA37C650* LA46C630* LA40C650* LA55C630* LA46C650* LA55C650* SERVICE Manual TFT-LCD TV Contents 1. Precautions 2. Product specifications 3. Disassembly and Reassembly 4. Troubleshooting 5. Exploded View & Part List 6. Wiring Diagram LA32C630* / LA40C630* / LA46C630* / LA55C630*/ LA32C650* / LA37C650* / LA40C650* / LA46C650*/ LA55C650* Refer to the service manual in the GSPN (see the rear cover) for the more information.
2. Product specifications 2-2. Specification Comparison to Old Models Arsenal/Valencia Arsenal/Chelsea Model (LA40C650*) (LA40B650*) Design Display Type LCD TV LCD TV Built-in Tuner Resolution 1920 x 1080 1920 x 1080 LCD Panel TFT LCD Panel 100Hz FULL HD TFT LCD Panel 100Hz FULL HD Screen Size 32"/37"/40"/46"/55"...
Page 14
2. Product specifications CHANNEL FREQUENCY TABLE OUTPUT FREQUENCY : ANALOG fv:45.75MHz, fs:41.25MHz DIGITAL Fc:44MHz TUNING STEP SIZE : FIRST PLL 250KHz SECOND PLL 62.5KHz OSD CH NO CH NO CH NO CH NO Air-DTV Air-NTSC BAND Cable STD BAND Cable HRC Cable IRC 72.
Page 15
2. Product specifications OSD CH NO CH NO CH NO CH NO Air-DTV Air-NTSC BAND Cable STD BAND Cable HRC Cable IRC 499.25 ULTRA 498.00 499.25 505.25 ULTRA 504.00 505.25 511.25 ULTRA 510.00 511.25 517.25 ULTRA 516.00 517.25 523.25 ULTRA 522.00 523.25 529.25...
2. Product specifications 2-3. Movie Plus: MJC(Motion Judder Cancellation) Technology Example • Motion Judder cancellation for HD film image. • Adaptive Recursive Search (ARS) - Implementation IPC/MJC at same time <Motion Judder> - Search Range Horizontal : ± 72 Pixel, Vertical : ±...
2. Product specifications 2-6. Internet@ TV (Only for c650 model) 2-6-1. Getting Started with Internet@TV Note Configure the network settings before using Internet@TV. For more information, refer to “Network Connection”. Unsupported fonts within the provider’s content will not display normally. ...
Page 19
2. Product specifications 2-6-2. Setting up Internet@TV Settings Create IDs and configure Internet@TV settings from this screen. Highlight Settings using ◀ and ▶ buttons and press the ENTER button. Account Login Ticker Autorun may not be supported depending on country. Ticker Autorun (Off / On): Enable/disable ticker autorun upon powering on the TV.
Various widgets are available from here, organized into different categories. Some widgets have a download fee. Using the colour buttons with the Samsung Apps. A Red button: To log in to the internet service. B Green button: To change the view mode.
Page 21
2. Product specifications Yahoo Internet@TV provides an integrated Internet and television experience powered by the Yahoo!® Widget Engine. You can monitor financial stocks, share photos with friends and family, and track news and weather all through the Yahoo!® Widget Engine. ...
2. Product specifications PROFILE Widget Set up user profiles through Profile Widget. You can set up multiple profiles, each with its own list of widgets. Use the Switch Profile option to switch to a different user profile. There must be at least two registered profiles. For instructions on adding a profile, refer to Administrative Controls. ...
Page 23
2. Product specifications 2-6-4. Yahoo OOBE (Out Of Box Experience) Description A. All users go through OOBE (Guided Setup) to access the dock the first time. B. All users must specify a location and accept the TOS (Terms Of Service) before the TV Widgets service are accessible.
Page 24
2. Product specifications Tutorial: Screens explaining how the docks work. Tutorial: Screens explaining the sidebar and global nav buttons. Final screen before dock comes up. 2-21...
Compatibility problem. Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data.SAMSUNG is not responsible for any data file damage or data loss. Do not disconnect the USB device while it is loading.
• Not supported WMA 22050. • XVID, MPEG4 SP, ASP : −Below 1280 x 720: 60 frame max −Above 1280 x 720: 30 frame max • GMC 2 over is not support. • Samsung Techwin MJEPG supported only. 2-23...
* ScreenShare(RUIS/RUIC) : You can see and control the UI of Home Network server supported device in your TV screen. Similarly, samsung TV provide the remote controller UI for the Home Network supported devices. <Connection> - TV & PC connection Same as DLNA network setting - Using ‘Ad-hoc’, TV &...
Page 28
5. Exploded View & Part List 5. Exploded View & Part List 5-1. LA32C650L1R Exploded View R001A T0101 T0101 T0101 T0101 INVER T0910 TCON T0764 M0014 PANEL SG03A F001A M0027 T0175 T0175...
Page 29
5. Exploded View & Part List 5-2. LA32C650L1R Parts List Location No. Code No. Description & Specification Q’ty SA/SNA Remark F001A BN96-12750E ASSY COVER P-FRONT;32,LC650,SO,PMMA+PMMA T0175 BN96-12871A ASSY SPEAKER P;6ohm,4pin,10W,L:530 R:170 PANEL BN07-00827A LCD-PANEL;T315HW04 V3,AU31H43,8bit,31.5, TCON BN81-04408A A/S-T CON T315HW04_V3;T315HW04 V3 INVER BN81-04437A A/S-INV T315HW04 V3;T315HW04 V3...
Page 30
5. Exploded View & Part List 5-2-1. LA32C650L1R Parts List Service Bom (SA: SERVICE AVAILABLE, SNA: SERVICE NOT AVAILABLE) Level Location No. Code No. Description & Specification Q’ty SA/SNA Remark LA32C650L1RXXM BN90-02437E ASSY COVER FRONT;32,LC650,SO F001A BN96-12750E ASSY COVER P-FRONT;32,LC650,SO,PMMA+PMMA ...3 BN60-00163A SPACER-FOAM;LC650-32",FOAM,400,0.5,25,Bo...
3. Disassembly and Reassembly 3. Disassembly and Reassembly This section of the service manual describes the disassembly and reassembly procedures for the LA32C650L1R LCD TV. WARNING: This LCD TV contains electrostatically sensitive devices. Use caution when handling these components. 3-1. Disassembly and Reassembly Cautions: 1.
Page 38
3. Disassembly and Reassembly Description Picture Description Screws 2. Remove the screws of rear-cover. 6003-001003 (M4, L12, Tapping) 3. Lift up the rear-cover.
Page 39
3. Disassembly and Reassembly Description Picture Description Screws 4. Remove the screws of IP and main board. 6001-002284 (M4, L6, Machine) 5. Remove the speakers and screws of inlet socket. 6001-002284 (M4, L6, Machine) 6001-002284 (M4, L6, Machine)
Page 40
3. Disassembly and Reassembly Description Picture Description Screws 6. Remove the screws of Stand BKLT. Lift up the Stand BKLT. 6003-001003 (M4, L12, Tapping) 6003-000337 (M4, L10, Tapping) 7. Remove the screw of panel top. 6003-001003 (M4, L12, Tapping) 8-1. Front 8-2.
Page 41
3. Disassembly and Reassembly Description Picture Description Screws 9. Remove the screw of wall bracket. 9-1. Remove the Balance Board BKLT. 9-2. Remove the Balance Board. 10. Detach the cable connected to T-con Board. * If it is not perfect connection, may cause vertical noise.
Page 42
3. Disassembly and Reassembly Description Picture Description Screws 10-1. Remove the screws of T-con. 10-2. Remove the T-con Board. 11. Panel. Reassembly procedures are in the reverse order of disassembly procedures. ※...
Page 43
5. Exploded View & Part List 5. Exploded View & Part List 5-1. LA32C650L1R Exploded View R001A T0101 T0101 T0101 T0101 INVER T0910 TCON T0764 M0014 PANEL SG03A F001A M0027 T0175 T0175...
Page 44
5. Exploded View & Part List 5-2. LA32C650L1R Parts List Location No. Code No. Description & Specification Q’ty SA/SNA Remark F001A BN96-12750E ASSY COVER P-FRONT;32,LC650,SO,PMMA+PMMA T0175 BN96-12871A ASSY SPEAKER P;6ohm,4pin,10W,L:530 R:170 PANEL BN07-00827A LCD-PANEL;T315HW04 V3,AU31H43,8bit,31.5, TCON BN81-04408A A/S-T CON T315HW04_V3;T315HW04 V3 INVER BN81-04437A A/S-INV T315HW04 V3;T315HW04 V3...
Page 45
5. Exploded View & Part List 5-2-1. LA32C650L1R Parts List Service Bom (SA: SERVICE AVAILABLE, SNA: SERVICE NOT AVAILABLE) Level Location No. Code No. Description & Specification Q’ty SA/SNA Remark LA32C650L1RXXM BN90-02437E ASSY COVER FRONT;32,LC650,SO F001A BN96-12750E ASSY COVER P-FRONT;32,LC650,SO,PMMA+PMMA ...3 BN60-00163A SPACER-FOAM;LC650-32",FOAM,400,0.5,25,Bo...
Yes: If the test pattern does not appear or there is noise in the test pattern, select Yes. There may be a problem with the TV. Therefore, contact Samsung’s call centre for assistance. Yes: If the test pattern is properly displayed, select No. There may be a problem with your external equipment.
4. Troubleshooting 4-1-1. No Power The LEDs on the front panel do not work when connecting the power cord. Symptom The SMPS relay does not work when connecting the power cord. The units appears to be dead. The IP relay or the LEDs on the front panel does not work when connecting the power cord if the cables are improperly connected or the Main Board or SMPS is not functioning.
Page 65
4. Troubleshooting WAVEFORMS R, G, B, H_sync input signal of IC6001(SDP84)
Page 66
4. Troubleshooting 4-1-2. No Video (Analog PC signal) Symptom Audio is normal but no picture is displayed on the screen. Check the PC source Major Check the Arsenal, Check the Valencia. checkpoints Refer to the next page to check the lacation such a CN201 or IC201 SVC Manual mentioned. Power indicator LED is off.
Page 69
4. Troubleshooting 4-1-3. No Video (HDMI 1, 2, 3, 4 - Digital Signal) Symptom Audio is normal but no picture is displayed on the screen. Check the HDMI source. Major Check the HDMI switch, Check the Valencia. checkpoints Refer to the next page to check the lacation such a CN201 or IC201 SVC Manual mentioned. Power indicator LED is off.
Page 72
4. Troubleshooting 4-1-4. No Video (Tuner_CVBS) Symptom Audio is normal but no picture is displayed on the screen. Check the Tuner CVBS source. Major Check the Tuner, Check the Valencia. checkpoints Refer to the next page to check the lacation such a CN201 or IC201 SVC Manual mentioned. Power indicator LED is off.
Page 75
4. Troubleshooting 4-1-5. No Video (Tuner DTV) Symptom Audio is normal but no picture is displayed on the screen. Check the DTV source. Major Check the Tuner, Check the Valencia. checkpoints Refer to the next page to check the lacation such a CN201 or IC201 SVC Manual mentioned. Power indicator LED is off.
Page 78
4. Troubleshooting 4-1-6. No Video (Video CVBS 1, 2) Symptom Audio is normal but no picture is displayed on the screen. Check the Video CVBS source Major Check the Valencia. checkpoints Refer to the next page to check the lacation such a CN201 or IC201 SVC Manual mentioned. Power indicator LED is off.
Page 81
4. Troubleshooting 4-1-7. No Video (Component 1, 2) Symptom Audio is normal but no picture is displayed on the screen. Check the Component source Major Check the Valencia. checkpoints Refer to the next page to check the lacation such a CN201 or IC201 SVC Manual mentioned. Power indicator LED is off.
Page 84
4. Troubleshooting 4-1-8. No Sound (1.Speaker 2.Monitor_out, 3.Optical) Symptom Video is normal but there is no sound.. When the speaker connectors are disconnected or damaged. Major When the sound processing part of the Main Board is not functioning. checkpoints Speaker defect. Check the source and check the connection Input the sound source properly.
Page 86
4. Troubleshooting WAVEFORMS MCLK / LRCLK / PCM_I2C_DATA Speaker / Monitor OUT , SPDIF OUT 4-26...
Page 87
4. Troubleshooting 4-1-8. Defect Analysis ahead of models. Defective image / Defective Symptoms Check & Solution No Picture and normal sound. Check the LVDS cable insert correctly. in case of defective a Panel or a defective connector between main board and panel. 4-27...
4. Troubleshooting 4-2. Alignments and Adjustments 4-2-1. General Alignment Instuction Usually, a color LCD-TV needs only slight touch-up adjustment upon installation. Check the basic characteristics such as height, horizontal and vertical sync. Use the specified test equipment or its equivalent. Correct impedance matching is essential.
4. Troubleshooting 4-3. Factory Mode Adjustments 4-3-1 Entering Factory Mode To enter ‘Service Mode’ Press the remote -control keys in this sequence : - If you do not have Factory remote - control INFO MENU MUTE Power on - If you have Factory remote - control PICTURE ON INFO FACTORY...
4. Troubleshooting 4-3-3 Factory Data Option Item Range OPTION Factory Reset Inch Vendor(A:AMLCD, D:CMO, L:AUO, I:CPT) Panel frequency (6:50/60Hz, 1:100/120Hz, 2:200/240Hz) Panel(A:AG, T:TN, U:UC) Select Type Resolution(F:FHD, H:HD, U:UD) Panel Type Panel 1st/2nd(1st:0, 2nd:1) BLU (C:CCFL, L:LED, E:EDGE LED) ex) 32D1UF0E : Vendor : CMO inch : 32 120Hz FHD U/C Edge LED panel EA_Vietnam EA_Thai EA_INA EA_China EA_India EA_Iran EA_Israel Local Set...
Page 91
4. Troubleshooting Control Item Range EDID EDID ON/OFF EDID WRITE ALL SUCCESS EDID WRITE PC SUCCESS EDID WRITE HDMI SUCCESS EDID WRITE HDMI1 … EDID WRITE HDMI2 … EDID WRITE HDMI3 … EDID WRITE HDMI4 … EDID 1.2PORT NONE,Not Support NONE, W-Milky, T-M-Brn, T-W-Brn, T-W-Gray, W-D-Gray, W-M-Whit Front Color W-Violet, T-C-Gray, T-R-BLK, S-BLK, S-C-Gray...
Page 92
4. Troubleshooting Item Range Sub Option Gamstar Support ON/ OFF OTA Duration Test ON/ OFF Alternate Del ON/ OFF OTN Reset OTN Duration ON/ OFF OTN Fail Test ON/ OFF PC Auto Ident Auto/ Enable IIC BUS STOP ON/ OFF Emergency Log Copy View Log Spread Spectrum...
Page 93
4. Troubleshooting Item Range Test for input Scaler. Pattern Sel : off, White, Grey, Balck, Red, Green, Blue If you can RRC PC Mode : On/Off Test Pattern see pattern Logic Pattern Sel well, there is a Logic Level Sel problem at input of Scaler Panel Auto Setting...
Page 94
4. Troubleshooting Item Range WB Movie W/B Movie ON/OFF ON/OFF MODE Dynamic/Movie/Natural Color Tone Cool/NORMAL/WARM1/WARM2 MSub Brightness Msub Contrast N_Rgain N_Bgain N_Roffset N_Boffset W1_Rgain … W1_Bgain … W1_Roffset … W1_Boffset … W2_Rgain … W2_Bgain … W2_Roffset … W2_Boffset … Movie Contrast Movie Bright Movie Color Movie Sharpness...
Page 95
4. Troubleshooting Item Range ColorMapping Auto_Red_R Auto_Red_G Auto_Red_B Auto_Green_R Auto_Green_G Auto_Green_B Auto_Blue_R Auto_Blue_G Auto_Blue_B Auto_Yellow_R Auto_Yellow_G Auto_Yellow_B Auto_Cyan_R Auto_Cyan_G Auto_Cyan_B Auto_Magenta_R Auto_Magenta_G Auto_Magenta_B Item Range EPA 3D Standard Contrast Standard Brightness Standard Sharpness Standard Color Standard Tint Standard Backlight 3D Contrast 3D Brightness V_3D PWM Delay_60 V_3D ANA Delay_60...
4. Troubleshooting 4-4. White Balance - Calibration 4-4-1 White Balance -Calibration AV Calibration ADC/WB Comp Calibration PC Calibration HDMI Calibration 4-4-2 Service Adjustment You must perform Calibration in the Lattice Pattern before adjusting the White Balance. Color Calibration Adjust spec. 1.
Page 104
4. Troubleshooting Method of Color Calibration (AV) 1) Apply the NTSC Lattice (N0. 3) pattern signal to the AV IN 1 port 2) Press the Source key to switch to “AV1” mode 3) Enter Service mode 4) Select the “Calibration” menu 5) Select the “AV Calibration”...
4. Troubleshooting 4-4-3 White Balance - Adjustment (low light) (hight light) Sub Bright Sub Contrast 3. W/B R offset R gain G offset G gain B offset B gain (W/B adjustment Condition refer next page) 4-5. White Ratio (Balance) Adjustment You can adjust the white ratio in factory mode (1:Calibration, 3:White-Balance).
4-6. Servicing Information 4-6-1 USB Download Method Samsung may offer upgrades for TV’s firmware in the future. Please contact the Samsung call center at 1-800- SAMSUNG (7267864) to receive information about downloading upgrades and using a USB drive. Upgrades will be possible by connecting a USB drive to the USB port located on located on the back of your TV.
Page 107
4. Troubleshooting 2. To enter User menu Support - Software Upgrade - By USB then press the ENTER button. The message USB searching... It may take up to 30 seconds is displayed. Please be careful to not disconnect the power or remove the USB drive while upgrade is being applied.
6. Wiring Diagram 6-3. Wiring Picture 6-4. Connector Functions Connector Functions Panel CN1901 The LVDS signal transfered Panel to Main Board. * defective symptom : No pcture but normal sound SMPS CN201 Supply dimming and main power from IP,SMPS to Main Board. * defective symptom : No pcture, repeat power On/Off 6-5.
Page 113
1. Precautions 1. Precautions 1-1. Safety Precautions Follow these safety, servicing and ESD precautions to prevent damage and to protect against potential hazards such as electrical shock. 1-1-1. Warnings For continued safety, do not attempt to modify the circuit board. Disconnect the AC power and DC power jack before servicing.
Page 114
1. Precautions 1-2. Servicing Precautions WARNING: An electrolytic capacitor installed with the wrong polarity might explode. Caution: Before servicing units covered by this service manual, read and follow the Safety Precautions section of this manual. Note: If unforeseen circumstances create conflict between the following servicing precautions and any of the safety precautions, always follow the safety precautions.
1. Precautions 1-4. Installation Precautions For safety reasons, more than a people are required for carrying the product. Keep the power cord away from any heat emitting devices, as a melted covering may cause fire or electric shock. Do not place the product in areas with poor ventilation such as a bookshelf or closet. The increased internal temperature may cause fire.