Page 1
System Operating Manual FUJITSU CELSIUS H730...
Page 2
You can find driver updates at: "http://support.ts.fujitsu.com/download" Should you have any technical questions, please contact: • our Hotline/Service Desk (see the Service Desk list or visit: "http://support.ts.fujitsu.com/contact/servicedesk") • Your sales partner • Your sales office We hope you enjoy working with your new Fujitsu system!
Page 5
FUJITSU CELSIUS H730 Operating Manual Innovative technology Ports and operating elements Important notes First-time setup of your device Working with the notebook Security functions Connecting external devices Removing and installing components during servicing Settings in BIOS Setup Utility Troubleshooting and tips Technical data Manufacturer’s notes...
Page 6
Trademarks Fujitsu, the Fujitsu logo and CELSIUS are registered trademarks of Fujitsu Limited or its subsidiaries in the United States of America and other countries. Microsoft and Windows are trademarks or registered trademarks of the Microsoft Corporation in the United States and/or other countries.
The Windows drivers for your device can be found on our Internet site. The factory installation of your device does not support any other operating system. Fujitsu Technology Solutions accepts no liability whatsoever if any other operating system is used.
"Safety information" • cross-references to an external source, e.g. a web address: For more information, go to "http://www.fujitsu.com/fts/" • Names of CDs, DVDs and titles or designations for other materials, e.g.: "CD/DVD Drivers & Utilities" or "Safety/Regulations" manual indicates a key on the keyboard, e.g:...
Page 14
11 = Headphone port USB charge, USB 3.0) 6 = USB port (USB 3.0) Right side 1 = Module bay with optical drive 3 = USB port (USB 2.0) 2 = Emergency removal opening 4 = Security Lock device Fujitsu...
Page 15
1 = Hard disk service compartment 5 = Port for port replicator 2 = Module release 6 = Battery with SIM card slot under the battery 3 = Ventilation slot cover 7 = Battery release 4 = Battery release 8 = Memory service compartment Fujitsu...
(e.g. petrol station, paintshops), as the transmitted radio waves can cause an explosion or a fire. For information on how to switch radio components on and off, see chapter "Switching the wireless components on and off", Page Fujitsu...
► Enquire with the corresponding government office of the country you will be travelling in as to whether you may operate the radio component integrated in your notebook there (see also "CE marking", Page 79). Fujitsu...
The surface can be cleaned with a dry cloth. If particularly dirty, use a cloth which has been moistened in mild domestic detergent and then carefully wrung out. To clean the keyboard and the touchpad, if available, you can use disinfectant wipes. Ensure that no liquid enters the device. Fujitsu...
► Unpack all the individual parts. Packaging Transport ► Check your device for any visible damage which may have occurred during transportation. You may need the packaging in the future, if you need to transport your device. Fujitsu...
► Connect the power cable (1) to the mains adapter. ► Plug the mains cable (2) into a mains outlet. ► Connect the mains adapter cable (3) to the DC jack (DC IN) of the device. Fujitsu...
If a Windows operating system is installed on your device, you will find more information on the system and drivers, help programmes, updates, manuals etc. on the device or on the Internet under "http://www.fujitsu.com/fts/support/". You can find information and help on the Windows operating system functions on the Internet at "http://windows.microsoft.com".
Please refer to the notes in "Important notes", Page Status indicators Statusindicator panel The status indicators provide information about the status of the power supply, the drives and the keyboard functions. Fujitsu...
Page 23
first battery. The first battery is charged to between 0% and 12% of maximum capacity. • The indicator flashes red (1 second on/1 second off). Malfunction. • The indicator is not illuminated: The first battery is not installed or is not charged. Fujitsu...
Page 24
Energy saving functions indicator • The indicator is illuminated: The energy saving functions are enabled (e.g. reduce screen brightness). • The indicator is not illuminated: The energy saving functions have been disabled. Fujitsu...
Back up your data and close all applications before you switch off your device. Otherwise data might be lost. ► Shut down the operating system correctly. Notebook ► If the notebook is not switched off automatically, press the ON/OFF switch for approx. five seconds. ► Close the LCD screen. Fujitsu...
The figure below shows how to access the different characters on keys with overlaid functions. The example applies when the Caps Lock key has not been activated. The illustrations shown below may differ from your actual device. Alt Gr Fujitsu...
Page 27
The cursor keys move the cursor in the direction of the arrow, i.e. up, down, left, or right. Cursor keys Cursor controlkeys Windows key The Windows key switches between the start screen and the last used application. Windowskey Menu key The Menu key opens the menu for the active application. Fujitsu...
Switching the loudspeakers on and off This key combination switches your notebook’s loudspeakers off and on. Fn+F3 Loudspeakers Loudspeakers Switching the touchpad and touchpad buttons on/off This key combination switches the touchpad and the touchpad buttons on or off. Fn+F4 Touchpad Touchpadbuttons Touchpad Fujitsu...
Page 29
This key combination opens the Windows security/Task-Manager Ctrl window. Ctrl+Alt+Del Back tab This key combination moves the cursor back to the previous tab stop. Shift+Tab Backtab Key combinations using the Windows keys are detailed in the manual for your operating system. Fujitsu...
(e.g. reduce screen brightness), see "Using the power-management features", Page Wireless Components key This application key is used to start the WirelessSelector software. The wireless components that have been activated in the BIOS Setup can be switched on and off individually. Fujitsu...
► Tap the touchpad once or press the left button once. The item is selected. Executing commands ► Move the pointer to the field you wish to select. Touchpad ► Tap the touchpad twice or press the left button twice. The command is executed. Fujitsu...
LCDscreen Notes High-quality TFT displays are installed in notebooks from Fujitsu Technology Solutions GmbH. For technical reasons, TFT monitors are manufactured for a specific resolution. An optimal, clear picture can only be ensured with the correct resolution intended for the relevant TFT monitor. A monitor resolution which differs from the specification can result in an unclear picture.
If you would like to perform a function test of your web cam, there is suitable test software available at "http://www.fujitsu.com/fts/support/index.html". Fujitsu...
If you do not use the batteries for long periods, remove them from the notebook. Never store the batteries in the device. Removing and installing the battery Only use rechargeable batteries approved by Fujitsu Technology Solutions for your notebook. Never use force when fitting or removing a battery.
► Position the battery at the edge. ► Push the battery into the battery slot until you feel it lock into place (1). ► Close the release button (2). ► Complete the removal, see chapter "Finishing component removal", Page Fujitsu...
The module can now be removed without any further actions being necessary. Removing a module Module Drive WeightSaver ► Slide the release mechanism (1) in the direction of the arrow and hold. ► Pull the module (2) out of the module bay. Fujitsu...
Avoid storing a data carrier in areas subject to high temperatures or humidity. You may use both 8 cm / 3.15 inch and 12 cm / 4.7 inch data carriers in the optical drive. When using a data carrier of lesser quality, vibrations and reading errors may occur. Fujitsu...
► Gently pull the drive tray (2) completely out. ► Place the data carrier in the drive tray with the printed side facing upwards. ► Remove a data carrier that has been inserted. ► Push in the drive tray until you feel it lock into place. Fujitsu...
Do not use any cleaning liquids! Ensure that no liquid enters the device. To avoid overheating of the device, do not remove the ventilation slot cover when the device is switched on. ► Prepare for removal, see chapter "Preparing to remove components", Page Fujitsu...
Page 40
► Clean the dust chamber. ► Insert the ventilation slot cover into the slot (1) at an angle as shown, and ensure that you feel it click into place. ► Complete the removal, see chapter "Finishing component removal", Page Fujitsu...
If you do not intend to use your notebook for a long period of time: ► Exit power saving mode if necessary via the mouse or keyboard or by switching on the notebook. ► Close all opened programs and completely shut down the notebook. Fujitsu...
(see the documentation for your operating system). ► On devices with card locking: Press on the storage card (1). Memory card The storage card is released and can now be removed. ► Pull the storage card out of the slot (2). Fujitsu...
► Put the SIM card (a) into the SIM card slider tray, as shown in the illustration on the slider tray. ► Push the SIM card slider tray back into the slot (2). ► Complete the insertion process, see chapter "Finishing component removal", Page Fujitsu...
► Complete the removal, see chapter "Finishing component removal", Page Wireless LAN/Bluetooth/UMTS/LTE radio components The installation of radio components not approved by Fujitsu Technology Solutions will invalidate the certifications issued for this device. Switching the wireless components on and off ►...
Access via UMTS/LTE You can purchase the accessories for UMTS/LTE reception from your retailer or your Fujitsu Technology Solutions dealer. If you have ordered a UMTS/LTE module, your device will already be prepared when you receive it.
11 = Connector on the Port Replicator for the docking port on the underside 5 = DisplayPort of the notebook 6 = DVI-D monitor port 12 = Release lever 7 = VGA port DVI port and DisplayPort cannot be used at the same time. Fujitsu...
► Disconnect the mains adapter cable from the DC socket (DC IN) of the notebook. ► Position the notebook so that it is in line with the back edge of the Port Replicator. ► Push the notebook onto the Port Replicator in the direction of the arrow (1) until you notice it engage. Fujitsu...
If the notebook cannot be shut down properly, press the ON/OFF button on the Port Replicator for approx. four seconds. The notebook will switch off. Any unsaved data may however be lost. Fujitsu...
We recommend that the notebook is switched off or that the appropriate undocking function provided by the operating system is executed. ► Switch the notebook off. ► Pull the release lever (1). ► Lift up the notebook (2). Fujitsu...
The palm vein sensor can record an image of the palm veins. With additional software, this image can be processed and used instead of a password. ► You must install the software in order to be able to use the palm vein sensor (1). Fujitsu...
Kensington Lock Cable, a sturdy steel cable, to help protect your notebook from theft. The Kensington Lock Cable is available as an accessory. Fujitsu recommends the use of a combination lock. ► Fit the Kensington Lock Cable to the mechanism on your notebook.
► From the Exit menu, choose the option Exit Saving Changes. ► Press the Enter key and select Yes. The notebook reboots and your hard disk is now protected with a password. The system will ask you to enter the password when the notebook is restarted again. Fujitsu...
► Select the Disabled option and press the Enter key. If you do not want to change any other settings, you can exit BIOS Setup Utility. ► Select the Save Changes & Exit option under Exit. The notebook will reboot. The system is no longer password-protected. Fujitsu...
► To cancel the password for the second hard disk (Drive1), go to the Drive1 area and select the field Set Master Password, then proceed in exactly the same way as for cancelling the password for the first hard disk (Drive0). Fujitsu...
Setup Notice: Changes have been saved is displayed to confirm that the text has been saved. ► From the Exit menu, choose the option Exit Saving Changes. ► Press the Enter key and select Yes. The notebook will restart and the Owner Information will be adopted. Fujitsu...
► Highlight the Virus Warning field and press the Enter key. ► Select Enabled to activate the Virus Warning function. ► From the Exit menu, choose the option Exit Saving Changes. ► Press the Enter key and select Yes. The notebook will restart and the settings will be adopted. Fujitsu...
In order to be able to take advantage of all the security features of your notebook, you will need a CardOS SmartCard from Fujitsu Technology Solutions. The SmartCard can only be used with a PIN, offering maximum protection even if you lose the SmartCard.
► Mark the TPM Security Chip Setting field and press the Enter key. ► Select Disabled to deactivate the TPM. ► From the Exit menu, choose the option Exit Saving Changes. ► Press the Enter key and select Yes. Your notebook will now restart and TPM will be disabled. Fujitsu...
Peripheraldevices Disconnecting devices from the notebook 1. Turn off your notebook and all external devices. 2. Unplug your notebook and all devices from the mains sockets. 3. Disconnect the cables for your external devices following the instructions. Devices Peripheraldevices Fujitsu...
► First switch on the external monitor and then the notebook. You can also switch between the external monitor and the LCD monitor of the notebook, see chapter "Key combinations", Page You can display the same picture on the external monitor and the notebook LCD monitor simultaneously. Fujitsu...
Additional information can be found in the documentation for the USB devices. ► Connect the data cable to the external device. ► Connect the data cable to a USB port of the notebook. Device drivers USB devices will be automatically recognised and installed by your operating system. Fujitsu...
► Left-click on the symbol to remove hardware safely. ► Select the device you wish to shut down and remove. ► Press the "Enter" key. Wait for the dialogue box which tells you that it is now safe to remove the device. Fujitsu...
If you purchase a cable from a retailer, please note the following information: The headphone port on your notebook is a "3.5 mm jack socket". If you want to connect headphones or a speaker you will need a "3.5 mm jack plug". Fujitsu...
The equipment and tools you use must be free of static charges. • Remove the power plug from the mains supply before inserting or removing boards containing ESDs. • Always hold boards with ESDs by their edges. • Never touch pins or conductors on boards fitted with ESDs. Fujitsu...
Otherwise, there is a risk of suffering burns! As some components are exposed that are sensitive to static electricity, please take note of chapter "Notes on installing and removing boards and components", Page Fujitsu...
Installing a memory module ► Insert the memory module with the contacts and the recess (a) facing the slot (1). Memory expansion Memory module ► Carefully push the memory module downwards until you feel it click into place (2). Fujitsu...
Keep the screws in a safe place. If you are removing more than one component at the same time, store the screws for the individual components separately from each other. If you install the wrong screws, components may be damaged. ► Lift the cover off the notebook (2). Fujitsu...
Removing and installing components during servicing Removing a hard disk ► Remove the hard disk from the hard disk compartment (1). Installing a hard disk ► Place the hard disk into the hard disk compartment (1). Fujitsu...
► Install the battery again (see "Installing the battery", Page 31). ► Turn the notebook the right way up again and place it on a flat surface. ► Reconnect the cables that you disconnected before. Fujitsu...
► Select the option you want to change with the cursor keys ↑ ↓ ► Press the Enter key. ► Press the key to exit the selected menu. ► For future reference, make a note of the changes you have made (for example, in this manual). Fujitsu...
► If you want to exit BIOS Setup Utility with these settings, choose Exit Saving Changes and Yes. Save Changes and Power Off ► To save the changes and switch off your device, select Save Changes and Power Off and Yes. The changes are saved. Your device is shut down. Fujitsu...
PC if you are running processor-intensive gaming software, e.g. games with intensive 3D graphics. Updating your hardware with drivers which have not been approved by Fujitsu Technology Solutions may result in performance losses, data losses or malfunction of the equipment. A list of approved drivers and current BIOS versions can be downloaded from: "http://support.ts.fujitsu.com/Download/Index.asp"...
The notebook’s LCD screen remains blank LCDscreen LCDscreenistoodark Cause Troubleshooting Monitor is switched off. ► Press a key or touch the touchpad. External monitor or television set connected. ► Press the key combination to switch the screen output, see "Key combinations", Page Fujitsu...
Change the following setting: ► Set the screen resolution: Set the screen resolution as described in the documentation for your operating system. ► Select monitor: Select monitor 1 or 2 as described in the documentation for your operating system. Fujitsu...
► Close the application program or restart malfunction. the notebook (by restarting the operating system or switching the device off and back on again). The battery is dead. ► Charge the battery. ► Insert a charged battery. ► Connect the mains adapter to the notebook. Fujitsu...
Your SmartCard must comply with the ISO standard 7816-1, -2, -3 and -4. SmartCard PIN forgotten Cause Troubleshooting PIN forgotten ► If you work in a network, contact your system administrator, who can unlock your Tablet PC with a supervisor PIN. Fujitsu...
► If you work in a network, contact your system administrator, who can boot your Tablet PC with a Supervisor SmartCard. Acoustic warnings Acoustic error messages Errors Cause Troubleshooting A beep sounds every few seconds. ► Charge the battery. The battery is almost flat. Fujitsu...
Press <F1> to resume, <F2> to SETUP operating system. This error message appears if an error occurs ► Press the function key to access the during the self-test before starting the operating system. BIOS Setup. Fujitsu...
Page 80
System battery is dead - Replace and run SETUP service centre. ► Contact your sales outlet or our customer System cache error - Cache disabled service centre. ► Contact your sales outlet or our customer System timer error service centre. Fujitsu...
5 ℃ ... 35 ℃ Operation -15 ℃ ... 60 ℃ Transportation Rechargeable battery You can find information on the batteries used in your device on the Internet at "http://www.fujitsu.com/fts/support/". 6-cell rechargeable battery Rated voltage 10.8 V Rated capacity 72 Wh...
Declarationofconformity The "Declarations of Conformity" for the device can be found on the Internet at: "http://globalsp.ts.fujitsu.com/sites/certificates/default.aspx". Fujitsu Technology Solutions hereby declares that your device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. CE marking...
Federal Communications Commission (FCC) of the USA. Although it is not explicitly forbidden to travel in the US trading area carrying this device, to avoid trouble at customs clearance, Fujitsu Technology Solutions GmbH recommends not to bring this device into the US trading area.
The user should be aware that compliance with the certification standards does not prevent service degradation in some situations. Repairs to telecommunication equipment should be made by a Canadian authorised maintenance facility. Any repairs or alterations not expressly approved by Fujitsu or Fujitsu...
Page 86
Les réparations de l’équipement de télécommunications doivent être effectuées par un service de maintenance agréé au Canada. Toute réparation ou modification, qui n’est pas expressément approuvée par Fujitsu, ou toute défaillance de l’équipement peut entraîner la compagnie de télécommunications à exiger que l’utilisateur déconnecte l’équipement de la ligne téléphonique.
Please note the following regulatory information related to the optional radio device. FCC Radio Frequency Exposure statement This radio device has been evaluated under FCC Bulletin OET 65C and found compliant with the requirements as set forth in CFR 47 Sections 2.1091, 2.1093, and 15.247 (b) (4) addressing RF Fujitsu...
Page 88
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesirable operation. Modifications not expressly authorised by Fujitsu Technology Solutions may invalidate the user’s right to operate this equipment. Fujitsu...
Page 90
Separate numeric keypad 24 see Adding memory 61 Mains adapter connecting 16 setting up 16 Operating system Manual removal of data carrier 35 activating system protection 49 Mechanical backup 47 cancel system protection 49 Memory card protecting with password 49 Fujitsu...