hit counter code
Samsung SNB-6003 User Manual
  1. Manuals
  2. Brands
  3. Samsung Manuals
  4. IP Camera
  5. SNB-6003
  6. User manual

Samsung SNB-6003 User Manual

Network camera
Hide thumbs Also See for SNB-6003:
Table of Contents

Advertisement

Quick Links

NETWORK CAMERA

SNB-6003/SNB-6004

User Manual

SND-6083/SND-6084

Advertisement

Table of Contents
loading

Related Manuals for Samsung SNB-6003

Summary of Contents for Samsung SNB-6003

  • Page 1: Network Camera

    NETWORK CAMERA SNB-6003/SNB-6004 User Manual SND-6083/SND-6084...
  • Page 2 Disclaimer Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the user’s own responsibility.

  • Page 3: Important Safety Instructions

    overview IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions.

  • Page 4: Explanation Of Graphical Symbols

    overview WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT. Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
  • Page 5 Class construction An apparatus with CLASS construction shall be connected to a MAINS socket outlet with a protective earthing connection. Battery Batteries(battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. Disconnection Device Disconnect the main plug from the apparatus, if it’s defected.
  • Page 6 overview Please read the following recommended safety precautions carefully. y Do not place this apparatus on an uneven surface. y Do not install on a surface where it is exposed to direct sunlight, near heating equipment or heavy cold area. y Do not place this apparatus near conductive material.

  • Page 7: Table Of Contents

    Product Features Recommended PC Specifications Recommended Micro SD/SDHC/ SDXC Memory Card Specifications NAS recommended specs What’s Included At a Glance (SNB-6003) At a Glance (SNB-6004) At a Glance (SND-6083) At a Glance (SND-6084) Mounting the Lens (SNB-6003/ INSTALLATION & SNB-6004)

  • Page 8: Overview

    overview Connecting to the Camera WEB VIEWER Login Installing Silverlight Runtime Installing STW WebViewer Plugin Using the Live Screen Playing the recorded video Setup SETUP SCREEN Video & Audio Setup Network Setup Event Setup NAS (Network Attached Storage) guide System Setup Specification APPENDIX Product Overview...

  • Page 9: Product Features

    PRODUCT FEATURES • Full HD Video Quality • Multi-Streaming This network camera can display videos in different resolutions and qualities simultaneously using different CODECs. • Web Browser-based Monitoring Using the Internet web browser to display the image in a local network environment. •...

  • Page 10: Recommended Pc Specifications

    overview RECOMMENDED PC SPECIFICATIONS • CPU : Intel Core 2 Duo 2.4 GHz or higher (for using 1920x1080 30 fps) Intel Core i7 2.8 GHz or higher (for using 1920x1080 60 fps) Web Plug-in is optimized to SSE 4.1 Instruction Set. •...

  • Page 11: Nas Recommended Specs

    If you use NAS equipment for purposes other than video saving, the number of accessible cameras may be reduced. WHAT’S INCLUDED Please check if your camera and accessories are all included in the product package. Appearance Item Name Quantity Description Model Name SNB-6003 or SNB-6004 or Camera SND-6083 or SND-6084 English _11...
  • Page 12 Appearance Item Name Quantity Description Model Name SNB-6003/ Instruction book, SNB-6004/ Installer S/W CD, SND-6083/ CMS S/W DVD SND-6084 SNB-6003/ Quick Guide SNB-6004/ (Optional) SND-6083/ SND-6084 SNB-6003/ Warranty card SNB-6004/ (Optional) SND-6083/ SND-6084 SNB-6003/ Used to test the camera...
  • Page 13 Screw ceiling, wall, etc. SND-6084 SND-6083/ Template Product installation guide SND-6084 Options (not included) Optional lens to be inserted in SNB-6003/ CS/C Lens a camera SNB-6004 Housing for installing indoor SND-6083/ Indoor Buried Housing buried type cameras SND-6084 English _13...

  • Page 14: At A Glance (Snb-6003)

    AT A GLANCE (SNB-6003) Front Side Item Description Used to fix the camera on a mounting bracket. The screw size : It is the specification for the screws used to fasten the Mounting Bracket camera to the support. Screw Hole 1/4"...

  • Page 15: Rear Side

    Rear Side Item Description Micro SD Memory Compartment for the Micro SD memory card. Card Compartment AUDIO OUT Used to connect to speakers. Audio terminal AUDIO IN Used to connect to a microphone. The button restores all camera settings to the factory default. Press and hold for about 5 seconds to reboot the system.
  • Page 16 overview Item Description Power Port Used to plug the power cable. Used to connect the PoE or Ethernet cable for network connection. Network Port Used to connect the alarm input sensor or external day/ ALARM IN night sensor. ALARM OUT Used to connect the alarm output signal.

  • Page 17: At A Glance (Snb-6004)

    AT A GLANCE (SNB-6004) Front Side Item Description Used to fix the camera on a mounting bracket. The screw size : It is the specification for the screws used to fasten the Mounting Bracket camera to the support. Screw Hole 1/4"...
  • Page 18 overview Rear Side Item Description Micro SD Memory Compartment for the Micro SD memory card. Card Compartment AUDIO OUT Used to connect to speakers. Audio terminal AUDIO IN Used to connect to a microphone. The button restores all camera settings to the factory default. Press and hold for about 5 seconds to reboot the system.
  • Page 19 Item Description Used to discharge the lightning current safely outside in order to protect the Lightning protective camera. grounding port Power Port Used to plug the power cable. Used to connect the PoE or Ethernet cable for network connection. Network Port Used to connect the alarm input sensor or external day/ ALARM IN night sensor.

  • Page 20: At A Glance (Snd-6083)

    overview AT A GLANCE (SND-6083) Appearance Item Description Dome cover Case cover used to protect the lens and the main unit. Camera Case Housing part that covers the camera body. 20_ overview...
  • Page 21 Components jk l English _21...
  • Page 22 overview Item Description Internal Cover It is a cover to protect the main body. Lens for the camera. Lens Focus Adjusting Turn it left and right to adjust the lens focus and rotate it clockwise to fix it. Lever Zoom Adjusting It can be used to adjust or fix the lens zoom.

  • Page 23: At A Glance (Snd-6084)

    AT A GLANCE (SND-6084) Appearance Item Description Case cover used to protect the lens and the main unit. Dome cover Housing part that covers the camera body. Camera Case English _23...
  • Page 24 overview Components ij k 24_ overview...
  • Page 25 Item Description Internal Cover It is a cover to protect the main body. Lens for the camera. Lens Zoom in (Tele) Zoom out (Wide) Zoom/Focus Control Focusing on a near object (Near) Button Focusing on a far object (Far) Focus Control Press this button for automatic focus control.

  • Page 26: Installation & Connection

    & connection MOUNTING THE LENS (SNB-6003/SNB-6004) Disconnect the power before proceeding. The C lens and CS lens are not included in the product package. It is recommended that megapixel lens are use on this camera to optimise performance. Mounting the CS lens on a camera Turn the CS lens clockwise to attach it.

  • Page 27: Connecting The Auto Iris Lens Connector

    Connecting the Auto Iris Lens connector Plug the iris connector of the lens in the camera connecting groove. Focusing Select a target to film, turn the zoom lever of the lens to adjust the magnification and then focus the lens so that target is clearly displayed. After focusing with the zoom lever of the lens, press the [FOCUS] button on the rear of the camera to adjust the lens even more clearly.

  • Page 28: Installation (Snd-6083/Snd-6084)

    installation & connection INSTALLATION (SND-6083/SND-6084) Precautions before installation Ensure you read out the following instructions before installing the camera: • It must be installed on the area (ceiling or wall) that can withstand 5 times the weight of the camera including the installation bracket. •...
  • Page 29 Installation 1. Attach the installation template to the selected area and punch 3 holes as shown in the figure. 2. Use the 2 supplied screws to fix the camera to the 2 punched holes. Set the <FRONT TOP> mark imprinted on the camera to face the direction of camera monitoring.
  • Page 30 installation & connection Adjusting the monitoring direction for the camera (SND-6083/ SND-6084) Tilt Lens rotation ` Adjusting the monitoring direction You can adjust the camera direction only when the camera is fixed on the ceiling. Where, rotating the camera unit to the left or right is called Pan, adjusting the tilt is called Tilt, and turning the lens on its axis is called Rotation.

  • Page 31: Inserting/Removing A Micro Sd

    Do not insert the Micro SD memory card while it’s upside down by force. Otherwise, it may damage the Micro SD memory card. Inserting a Micro SD Memory Card Push the Micro SD memory card in the direction of the arrow shown in the diagram. <SNB-6003/SNB-6004> <SND-6083/SND-6084> English _31...
  • Page 32 Gently press down on the exposed end of the memory card as shown in the diagram to eject the memory card from the slot. <SNB-6003/SNB-6004> <SND-6083/SND-6084> Pressing too hard on the Micro SD memory card can cause the card to shoot out uncontrollably from the slot when released.

  • Page 33: Memory Card Information

    MEMORY CARD INFORMATION (NOT INCLUDED) What is a memory card? The memory card is an external data storage device that has been developed to offer an entirely new way to record and share video, audio, and text data using digital devices. Selecting a memory card that’s suitable for you Your camera supports Micro SD/SDHC/SDXC memory cards.

  • Page 34: Connecting With Other Device

    installation & connection CONNECTING WITH OTHER DEVICE Monitor to install Grounding cable Power Ethernet Monitor to install Ethernet Power The CVBS out terminal of the product is provided for easier installation, and is not recommended for monitoring purposes. 34_ installation & connection...

  • Page 35: Ethernet Connection

    Ethernet Connection Connect the Ethernet cable to the local network or to the Internet. Power Supply (SNB-6003/SNB-6004) Use the screwdriver to connect each line (+, –) of the power cable to the corresponding power port of the camera. If PoE and DC 12V powers are both applied, the device will be operated by the initially applied power source.
  • Page 36 Max Distance 100M PoE Support IEEE 802.3af Grounding the Product (SNB-6003/SNB-6004) Connect the ground wire to the ground terminal which is located above the power input terminal by using a screwdriver. Grounding protects the product from a surge or lightning.
  • Page 37 Connecting to Audio Input/Output Speaker Microphone Microphone Microphone Network Speaker Speaker Microphone Speaker Speaker Microphone English _37...
  • Page 38 • Audio out : Mono signal line output (Max.2.4 Vpp) • Line out impedance : 600Ω Connecting to the I/O port box (SNB-6003/SNB-6004) Connect the Alarm I/O signal to the corresponding port of the rear port box. • ALARM IN : Used to connect the alarm input sensor or external day/night sensor.
  • Page 39 Connecting an external RS-485 device (SNB-6003/SNB-6004) Connect the camera with an external device using the [RS-485 +, -] ports. You can control the pan/tilt operations of the camera via RS-485 communications. The GND connection is recommended for RS-485 communications. If you encounter a communication failure, connect the GND pin as appropriate to correct the GND level between camera and external device.
  • Page 40 Refer to the alarm out connection diagram below when connecting devices that exceed the voltage and current specifications. Alarm Out Wiring Diagram (SNB-6003/SNB-6004) External connection Inside of the camera DC 5V or 3.3V...

  • Page 41: Network Connection And Setup

    network connection and setup You can set up the network settings according to your network configurations. CONNECTING THE CAMERA DIRECTLY TO LOCAL AREA NETWORKING Connecting to the camera from a local PC in the LAN 1. Launch an Internet browser on the local PC. 2.

  • Page 42: Connecting The Camera Directly To A Dhcp

    network connection and setup CONNECTING THE CAMERA DIRECTLY TO A DHCP BASED DSL/CABLE MODEM INTERNET DSL/Cable Modem Camera External Remote PC DDNS Server (Data Center, KOREA) 1. Connect the user PC directly with the network camera. 2. Run the IP Installer and change the IP address of the camera so that you can use the web browser on your desktop to connect to the Internet.

  • Page 43: Modem

    CONNECTING THE CAMERA DIRECTLY TO A PPPoE MODEM INTERNET PPPoE Modem Camera External Remote PC DDNS Server (Data Center, KOREA) 1. Connect the user PC directly with the network camera. 2. Run the IP Installer and change the IP address of the camera so that you can use the web browser on your desktop to connect to the Internet.

  • Page 44: Connecting The Camera To A Broadband Router With The Pppoe/Cable Modem

    network connection and setup CONNECTING THE CAMERA TO A BROADBAND ROUTER WITH THE PPPoE/CABLE MODEM This is for a small network environment such as homes, SOHO and ordinary shops. Camera INTERNET PPPoE or PPPoE or Broadband Cable Modem Cable Modem Router External Remote PC Camera...

  • Page 45: Buttons Used In Ip Installer

    BUTTONS USED IN IP INSTALLER e f g Item Description Model name of the connected camera. Device Name Click the column to sort the list by model name. However, search will be stopped if clicked during the search. Alias This function is not currently implemented. Displays either <Static>, <Dynamic>...

  • Page 46: Static Ip Setup

    Exit For the IP installer, use only the installer version provided in the installation CD or use the latest one if available. You can download the latest version from the Samsung web site (www.samsungcctv.com). STATIC IP SETUP Manual Network Setup Run <IP Installer_v2.XX.exe>...
  • Page 47 3. In the <Address> pane, provide the necessary information. • MAC (Ethernet) Address : The MAC address imprinted on the camera label is automatically displayed and requires no user setting. IP related parameters can be set only when DHCP is not checked. If not using a Broadband Router For setting <IP Address>, <Subnet Mask>, and <Gateway>, contact your network administrator.
  • Page 48 network connection and setup If using a Broadband Router • IP Address : Enter an address falling in the IP range provided by the Broadband Router. ex) 192.168.1.2~254, 192.168.0.2~254, 192.168.XXX.2~254 • Subnet Mask : The <Subnet Mask> of the Broadband Router will be the <Subnet Mask>...
  • Page 49 Auto Network Setup Run <IP Installer_v2.XX.exe> to display the camera search list. At the initial startup, both [Auto Set] and [Manual Set] will be grayed out. For cameras found with the IPv6 setting, these buttons will be grayed out as the cameras do not support this function.

  • Page 50: Dynamic Ip Setup

    network connection and setup DYNAMIC IP SETUP Dynamic IP Environment Setup • Example of the Dynamic IP environment - If a Broadband Router, with cameras connected, is assigned an IP address by the DHCP server - If connecting the camera directly to modem using the DHCP protocols - If IPs are assigned by the internal DHCP server via the LAN Checking the Dynamic IP 1.

  • Page 51: Port Range Forward (Port Mapping) Setup

    PORT RANGE FORWARD (PORT MAPPING) SETUP If you have installed a Broadband Router with a camera connected, you must set the port range forwarding on the Broadband Router so that a remote PC can access the camera in it. Manual Port Range Forwarding 1.
  • Page 52 Port forwarding can be done without additional router setup if the router supports the UPnP (Universal Plug and Play) function. After connecting the network camera, set <Quick connect> of <Samsung DDNS> to <On> in the “Setup  Network  DDNS” menu.

  • Page 53: Connecting To The Camera From A Shared Local Pc

    CONNECTING TO THE CAMERA FROM A SHARED LOCAL PC 1. Run the IP Installer. It will scan for connected cameras and display them as a list. 2. Double-click a camera to access. The Internet browser starts and connects to the camera. Access to the camera can also be gained by typing the camera's IP address in the address bar of the Internet browser.

  • Page 54: Web Viewer

    web viewer web viewer CONNECTING TO THE CAMERA Normally, you would 1. Launch the Internet browser. 2. Type the IP address of the camera in the address bar. ex) • IP address (IPv4) : 192.168.1.100  http://192.168.1.100 - the Login dialog should appear. •...
  • Page 55 To register your device to the <DDNS> server, visit www.samsungipolis.com and register your device first, and then set the Web Viewer’s <Network> - <DDNS> to <Samsung DDNS>, as well as providing <Product ID> that had been used for DDNS registration.
  • Page 56 web viewer LOGIN Whenever you access the camera, the login window appears. Enter the User ID and password to access the camera. 1. Enter “admin” in the <User name> input box. The administrator ID, “admin”, is fixed and can not be changed. 2.

  • Page 57: Installing Silverlight Runtime

    INSTALLING SILVERLIGHT RUNTIME If your PC has not installed Silverlight Runtime or has just installed an old runtime version, you will be redirected to the Silverlight Runtime installation page automatically when accessing the web viewer. To install on Windows OS 1.
  • Page 58 web viewer To install on MAC OS 1. Run the file trailing with “.dmg”. 2. Run the install package file automatically created, ending with “.pkg”. 3. Click <Continue>. 4. Select your language on the language selection screen, and click <Continue>. 58_ web viewer...
  • Page 59 5. Click <Agree>. 6. Click <Install>. 7. Enter the password of the account currently logged in, and click <Install Software> and continue. 8. Once completed, click <Close>. English _59...

  • Page 60: Installing Stw Webviewer Plugin

    web viewer INSTALLING STW WebViewer PLUGIN If connecting to a camera for the first time, you will see the installation message. Then, install the required WebViewer Plugin to access the camera and control the video from it in real time. 1.
  • Page 61 5. Click [OK]. The old version of Web Viewer Plug-in is deleted. 6. Click [Install] to begin installation of the Web Viewer Plug-in. 7. Click [Finish]. STW Web Viewer Plug-in installation is completed. English _61...

  • Page 62: Using The Live Screen

    web viewer USING THE LIVE SCREEN Item Description Move to the monitoring screen. Monitoring Move to the screen where you can search for the video recording saved in your Micro Playback SD memory card or NAS. Move to the Setup screen. Setup Displays the Live video on the screen.
  • Page 63 Connect the external PTZ to the RS-485 terminal and control the PTZ camera lens direction with the arrow keys. External PTZ Only for SNB-6003/SNB-6004. The pan/tilt operations will be enabled only if the camera is connected to a pan/ tilt-compliant receiver.
  • Page 64 )] icon to enable it again. To Use Microphone Click [Mic ( )] icon to activate the microphone. To control the PTZ (SNB-6003/SNB-6004) 1. Press the [PTZ ( )] tab. 2. When the PTZ icon appears on the screen, use the direction buttons to adjust the camera angle, zoom factor or focus to your preference.

  • Page 65: Playing The Recorded Video

    PLAYING THE RECORDED VIDEO Before you can play the video, you must configure the record settings. For details on record settings, refer to “Storage”. (page 109) Name of event search screen and its function Item Description Set the search date and time range for data saved in your Micro SD memory Search range setting card or NAS.
  • Page 66 web viewer To play the content after searching by event 1. Click the [Playback ( )] button. 2. Specify the start time and end time of your search. 3. Select an event type for your search within the specified period. 4.
  • Page 67 Name of time search screen and its function Item Description The section in the specific period is played by moving the time bar. Time bar Set the search date using the calendar. Search date setting If there is data saved in your Micro SD memory card or NAS on the day, it is marked as a box on the calendar.
  • Page 68 web viewer Item Description Time data of the replayed video is displayed on the screen. Video information Set the desired date to make a backup copy of video data saved in your Micro SD memory card or NAS. Backup Can be set as up to 5 minutes. To play after searching by time 1.
  • Page 69 6. Move [Time bar ( )] to a desired time point of the video before playing it. The time containing a normal recoding file will be highlighted in blue; the time with the event recording will be highlighted in red. To back up the searched video 1.
  • Page 70 web viewer To Play an AVI File (1) Micro SD memory card 1. Separate the micro SD memory card from the camera. Before separating the micro SD memory card, set the <Device> to <Off> in the “Setup  Event  Storage” menu. 2.
  • Page 71 (2) NAS (Network-Attached Storage) 1. In Windows browser, use \\<ip address>\ to access. ex)\\192.168.20.31\defaultfolder\ch01\ img\2013_07_02\AVI 2. Go to <Computer>  <Network drive connection>  Enter 1. 3. Connected to the NAS. The directory structure is same as the directory structure for a Micro SD memory card.

  • Page 72: Setup Screen

    setup screen SETUP You can configure the video & audio, network, event and system settings of the camera in the network. 1. In the Live screen, click [ Setup ( ) ] . 2. The Setup screen appears. Microsoft Silverlight 5.0 or higher is required to be installed on the PC for setup pages that provide preview video.
  • Page 73 • E-mail/FTP profile : Video profile to be transferred to the specified email or FTP site. Only the MJPEG codec can be set as the E-mail/FTP profile. • Record profile : The profile is applied to your Micro SD memory card or NAS when you record video.
  • Page 74 setup screen To Add/Change the Video Profile The profile setup can be added or modified to accommodate various profiles depending on the recording conditions. 1. Select one from the <Video profile> options. 2. Provide the name and select a codec. 3.
  • Page 75 • Encoding priority : You can set the priority of video transmission to frame rate or compression. • GOV length : It specifies the distance (in terms of number of frames) between two consecutive I-Frames in a video sequence when H.264 codec was selected. (One I-Frame + 0~Several P-Frames) •...
  • Page 76 setup screen To Use Crop Encoding 1. Select <Use>. 2. Click <Set area>. The Crop Encoding Area Setup window will pop up. 3. Select <Ratio>. • Ratio: It sets up the aspect ratio of the user specified area. - 16:9 : The aspect ratio shall be set to 16:9 as close as to the user specified area.

  • Page 77: Video Setup

    Video setup 1. From the Setup menu, select the <Video & Audio ( )> tab. 2. Click <Video setup>. 3. Select a <Video source> mode. • Flip mode : Turn upside down the image that is captured by the camera. •...

  • Page 78: Audio Setup

    setup screen Audio setup You can configure the I/O settings of the audio source from the camera. 1. From the Setup menu, select the <Video & Audio ( )> tab. 2. Click <Audio setup>. 3. Set the audio input value. •...

  • Page 79: Camera Setup

    Camera setup You can change the camera settings according to the environment where the camera is located. 1. From the Setup menu, select the <Video & Audio ( )> tab. 2. Click <Camera setup>. 3. Configure the settings as necessary of : Image preset, Sensor, SSDR, White balance, Back light, Exposure, Day/ Night, Special, OSD...
  • Page 80 setup screen 4. Set the <Mode>. • Definition focus : This is the factory setting for your camera. Select it for video recording, focusing on reproducibility. • Motion focus : Record a moving object clearly. If there are many moving objects, such as on a road or in a crowded place like a museum, select this option.
  • Page 81 If the sensor mode is set to 50 fps or 60 fps, the <Back light> mode cannot be set to <WDR>. To Set SSDR (Samsung Super Dynamic Range) In a scene where the difference between bright and dark is severe, you can increase the brightness of the dark area alone to regulate the overall brightness.
  • Page 82 setup screen To Set White Balance You can correct the image colors based on white under any lighting conditions. 1. Select <White balance>. 2. Select <Mode>. • ATW : Corrects the colors of the camera video automatically. • Manual : You can adjust the red and blue gains of the camera video manually.
  • Page 83 The maximum and minimum shutter values are initialized whenever you turn on or off the WDR mode. In case of SNB-6003/SNB-6004, some of the WDR functions may be restricted when the manual or P-iris lens (manual) is used. In the case of SND-6083/SND-6084, if you use a shutter in manual mode, the WDR function may be partially restricted.
  • Page 84 To Set Exposure (SNB-6003/SNB-6004) You can adjust the exposure level of the camera. 1. Select <Exposure>. 2. Select each item and set it properly. • Brightness : Adjust the screen brightness. • Minimum shutter : The limit of the longest exposure time.
  • Page 85 To Set Exposure (SND-6083) You can adjust the exposure level of the camera. 1. Select <Exposure>. 2. Select each item and set it properly. • Brightness : Adjust the screen brightness. • Minimum shutter : The limit of the longest exposure time. Shutter is the mode to set up the range of the sensor exposure time which will specify the upper and lower limits for the electronic shutter movement.
  • Page 86 setup screen To Set Exposure (SND-6084) You can adjust the exposure level of the camera. 1. Select <Exposure>. 2. Select each item and set it properly. • Brightness : Adjust the screen brightness. • Minimum shutter : The limit of the longest exposure time.

  • Page 87: English

    To Set Day/Night (SNB-6003/SND-6083/SND-6084) 1. Select <Day/Night>. 2. Select each item and set it properly. • Mode: Mode is used to adjust the color of Color or Black and White. - Color : The video is always output in color.
  • Page 88 setup screen To Set Day/Night (SNB-6004) 1. Select <Day/Night>. 2. Select each item and set it properly. • Mode: Mode is used to adjust the color of Color or Black and White. - Color : The video is always output in color.
  • Page 89 To Setup Special 1. Select <Special>. 2. Select each item and set it properly. • Sharpness mode : Adjust the overall sharpness of the image. If selecting <On>, you can adjust the sharpness of the image. • Sharpness level : The higher the level is, the sharper and clearer the outline of the image becomes.
  • Page 90 setup screen To Set OSD 1. Select <OSD>. 2. Select each item and set it properly. • Title overlay : It specifies if the camera name shall be displayed on the screen. • Camera title : It specifies the name of the camera to be displayed on the screen.
  • Page 91 Smart codec setup Set a desired area of the video incoming from the camera as ROI area and specify the detection sensitivity for the area. 1. From the Setup menu, select the <Video & Audio ( )> tab. 2. Click <Smart codec setup>. 3.
  • Page 92 ] button to manually adjust the focus. In a situation where Simple focus is hardly applied, try to use the manual focus mode. For SNB-6003, set the lens mode(shutter) to <Manual> to adjust the focus. After the focus is adjusted, select a desirable lens mode.
  • Page 93 Focus setup (SND-6084) You can adjust the focus and zoom ratio of video image. 1. From the Setup menu, select the <Video & Audio ( )> tab. 2. Click <Focus setup>. 3. Set the focus and zoom. • Focus : Manually adjusts the lens focus (Far ...
  • Page 94 External PTZ setup (SNB-6003/SNB-6004) Configure the connection settings to the external pan/tilt receiver so that you can control the PTZ operations via the receiver connected to the RS-485 port of the camera. 1. Select the <Video & Audio ( )>...
  • Page 95 P control movement T control movement movement control Preset Remarks control control speed speed speed speed SAMSUNG-T O (1~6) O (1~6) O (1~4) O (1~4) SAMSUNG-E O (1~6) O (1~6) O (1~4) PELCO-D O (1~6) O (1~6) PELCO-P O (1~6)
  • Page 96 setup screen 5. Adjust the direction. • [Change direction to ( )] : The camera direction is adjusted. • [Moving speed control ( )] : The bigger the number is, the faster the moving speed becomes. 6. Set the zoom and focus. •...

  • Page 97: Network Setup

    NETWORK SETUP Interface 1. From the Setup menu, select the <Network ( )> tab. 2. Click <Interface>. 3. Set the <Interface> and <IPv6 setup> as necessary. • IP type : Select an IP connection type. - Manual : Specify the IP address, Subnet mask, Gateway, DNS1, and DNS2.
  • Page 98 The available setting range is 1024~65535. (For security reasons, in your Safari or Google Chrome browser, you may not use 65535 as your HTTPS port.) • Device port : Set a port used to transfer video signals with the Samsung protocols.
  • Page 99 • Samsung DDNS : Select this if you use the DDNS server provided by Samsung Techwin. - Product ID : Enter the product ID that is registered with the Samsung DDNS service. - Quick connect : It sets port forwarding automatically when used with a UPnP (Universal Plug and Play) supporting router.
  • Page 100 Registering with DDNS To register your product with the Samsung DDNS 1. Visit the iPOLiS web site (www.samsungipolis.com) and sign in with a registered account. 2. From the top menu bar, select <DDNS SERVICE> - <MY DDNS>. 3. Click [PRODUCT REGISTRATION].
  • Page 101 To connect to the Samsung DDNS in camera setup 1. From the DDNS setup page, set <DDNS> to <Samsung DDNS>. 2. Provide the <Product ID> that you registered product ID with the DDNS site. 3. Click [Apply ( When the connection is successfully made, you will see the message of <(Success)>...
  • Page 102 setup screen IP filtering You can create a list of IPs that you want to grant or deny access to them. 1. From the Setup menu, select the <Network ( )> tab. 2. Click <IP filtering>. 3. Select <Filtering type>. •...
  • Page 103 You can select a secure connection system or install the public certificate for this purpose. 1. From the Setup menu, select the <Network ( )> tab. 2. Click <SSL>. 3. Select a secure connection system. If you want to use HTTPS mode for camera access, you need to enter the camera IP address as https://<Camera_IP>:HTTPS.
  • Page 104 setup screen 802.1x When connecting network, you can choose whether using 802.1x protocol, and then install the certification. 1. From the Setup menu, select the <Network ( )> tab. 2. Click <802.1x>. 3. Set the <IEEE 802.1x setting(EAPOL using EAP-TLS)>. •...
  • Page 105 You can specify the priority to secure a stable transfer rate for a specific IP. 1. From the Setup menu, select the <Network ( )> tab. 2. Click <QoS>. 3. Click the [Add ( )] button. The IP list will be created. 4.
  • Page 106 setup screen • Enable SNMP Trap : SNMP trap is used to send important events and conditions to the Admin. - Community : Enter the trap community name to receive messages. - IP address : Enter the IP address to which messages will be sent. - Authentication failure : It specifies whether an event shall be generated when the community information is invalid.
  • Page 107 Disable for UPnP Discovery. • Friendly name : Display the camera name. Friendly name is displayed in the format of SAMSUNG-<Model Name>-<MAC Address>. In the Windows operating system which basically supports UPnP, the cameras connected to the network are displayed.

  • Page 108: Event Setup

    setup screen EVENT SETUP FTP / E-mail You can configure the FTP/E-mail server settings so that you can transfer the images taken with camera to your PC if an event occurs. 1. From the Setup menu, select the <Event ( )>...
  • Page 109 • E-mail configuration - Server address : Enter the IP address of the email server that you transfer the alarm or event images to. - Use authentication : Select whether to use authorization. - Use SSL : Specify the use of SSL. - ID : Enter the user ID for logging into the email server.
  • Page 110 If you insert a SD card saved in another saving file type (AVI/STW), you will need to format it before use. - STW : It is Samsung Techwin’s unique file format. - AVI : It is the conventional avi format.

  • Page 111: Nas (Network Attached Storage)

    4. Specify the <Normal record setup>. • Always : Always save recorded video in the Micro SD memory card. If set to Always, the activation time cannot be changed. • Only scheduled time : Records only on the specified time of the specified day of week. •...
  • Page 112 setup screen Confirm that the NAS IP address and the camera IP address are in the same format. ex) The NAS & camera subnet mask initial value is 255.255.255.0. If the IP address is 192.168.20.32 then the NAS IP address should be in the range of 192.168.20.1~192.168.20.255.
  • Page 113 NAS (Network Attached Storage) guide When you use the NAS, you might be unable to save data due to temporary network disconnections. If the setting allows a Micro SD memory card and the NAS to be simultaneously connected for use, the higher priority for recording goes to the NAS. If you are saving data in the NAS, you might be unable to save it when you insert a Micro SD memory card used by another camera.
  • Page 114 setup screen 3. Click the <Shared Folder> in the file sharing and privilege menu. 4. Click the [Create] button. 5. After entering the shared folder name(ID), click the [OK] button to create a shared folder. In this example, the shared folder name is [testDirectory].
  • Page 115 8. After clicking the [Create] button, enter name(ID) and password. In this example, name(ID) is set to [testID] and password is also set to [testID]. According to the NAS recommendations, when you use Netgear’s NAS equipment, do not allocate the capacity for use. 9.

  • Page 116: Alarm Input

    setup screen Alarm input You can set the alarm input type, activation time, and operation mode. 1. From the Setup menu, select the <Event ( )> tab. 2. Click <Event setup>. 3. Select <Alarm input> from <Event action setup>. 4. Set whether or not to <Enable>. 5.

  • Page 117: Time Schedule

    • Goto preset : Moves to the specified preset location when setting the alarm input. Only for SNB-6003/SNB-6004. Only if the camera pan/tilt receiver is installed, Goto preset is available. 8. When done, click [Apply (...

  • Page 118: Tampering Detection

    setup screen Tampering detection You can set to detect tampering attempts and trigger events, such as sudden change of camera’s framing direction, blocked lens and other overall change of scenes from the video. 1. From the Setup menu, select the <Event ( )>...
  • Page 119 Motion detection / Video analytics Events of motion detection and video analysis can be set to trigger event signal output. 1. From the Setup menu, select the <Event ( )> tab. 2. Click <Event setup >. 3. Select <Motion detection / Video analytics>...
  • Page 120 setup screen Before using, set the minimum and maximum motion sizes to suit desired motion range to be detected. Detected size of an object may have difference with the actual size according to its shape. Up to 16 objects from the top side of the screen can be displayed. If camera is capturing a close object, the video analysis capability may degrade.
  • Page 121 To use Motion detection It detects a motion that meets all conditions specified by sensitivity, size and area. 1. Select a motion detection mode. 2. Select <Sensitivity> tab to set the sensitivity level. You can set the sensor’s sensitivity to detect a motion out of the background from the monitoring video.
  • Page 122 setup screen 4. Select <Area> tab. You can specify an area on the screen to include or exclude the area to/from detection. You can specify up to 4 areas. • Detection area : Sets the entire screen as excluded from detection, and adds specified area as motion detection area.
  • Page 123 To use Video analytics It detects event that meets all conditions specified by sensitivity, size and area and the event condition rules. 1. Select the video analysis mode. 2. Set <Sensitivity>, <Size> and <Area>. For further details on settings, refer to “To use Motion detection”.
  • Page 124 setup screen To set the video analysis rules ` Passing 1. Set the type to <Passing>. 2. On the screen, click on preferred starting and ending point of the virtual line, then a popup window appears. 3. Select the desired rule: •...
  • Page 125 ` Appearing (Disappearing) 1. Set the analysis type to <Appearing (Disappearing)>. 2. Select the desired event rule: • Defined area based rules : It detects event of appearing object that appears in the area and remaining for a certain time period while not passing through the area borders, and opposite case of disappearing of objects existed in the area.

  • Page 126: Face Detection

    setup screen Face detection You can set to detect recognized face and trigger an event accordingly. 1. From the Setup menu, select the <Event ( )> tab. 2. Click <Event setup>. 3. Select <Face detection> from < Event action setup>. 4.

  • Page 127: Audio Detection

    Audio detection You can set to detect sound over the specified level and trigger an event accordingly. 1. From the Setup menu, select the <Event ( )> tab. 2. Click <Event setup>. 3. Select <Audio detection> from <Event action setup>. 4.
  • Page 128 setup screen Network disconnection You can receive and save events of a physically disconnected network. 1. From the Setup menu, select the <Event ( )> tab. 2. Click <Event setup>. 3. Select <Network disconnection> from <Event action setup>. 4. Set whether or not to <Enable>. 5.
  • Page 129 Alarm output setup 1. From the Setup menu, select the <Event ( )> tab. 2. Click <Alarm output setup>. 3. Set the camera’s type of alarm output. If you change the alarm output type, the alarm out button on the monitoring page and alarm output type displayed on Event Setup page will be changed accordingly.

  • Page 130: System Setup

    setup screen SYSTEM SETUP Product information 1. From the Setup menu, select the <System ( )> tab. 2. Click <Product information>. 3. Check the camera information, or provide details according to your network environment. • Model : Model name of the product. •...
  • Page 131 Date & Time 1. From the Setup menu, select the <System ( )> tab. 2. Click <Date & Time>. 3. Specify the time and date that will be applied to the camera. • Current system time : Displays the current time settings of your system. •...
  • Page 132 Audio Output. Video Transfer, Changing Video Information, Alarm Output : Set the profile to <All>, and select at your preference for the rest. PTZ control : Select <PTZ>. (Only for SNB-6003/SNB-6004) 4. When done, click [Apply ( 132_ setup screen...
  • Page 133 Upgrade / Reboot 1. From the Setup menu, select the <System ( )> tab. 2. Click <Upgrade / Reboot>. 3. Select a desired item and set it appropriately. • Upgrade : Performs upgrading the system. • Factory default : Resets the system to the factory default.
  • Page 134 If you forcibly terminate the upgrade process, upgrade will not be completed properly. During restarting the system, accessing with web viewer will not be made. You can download the latest version from the Samsung web site (www.samsungcctv.com). To back up the current settings 1.
  • Page 135 You can check the system log or event log. 1. From the Setup menu, select the <System ( )> tab. 2. Click <Log>. 3. Select a log type. • System : You can check the system logs where any system changes are recorded including the time information.
  • Page 136 setup screen Profile access You can check the video profile of the camera being connected now. 1. From the Setup menu, select the <System ( )> tab. 2. Click <Profile access>. • Profile access : Show the information of the newly added profile. - Profile : Show the information of the newly added codec.
  • Page 137 Open SDK A user can install an application on their camera to execute additional functions. 1. From the Setup menu, select the <System ( )> tab. 2. Click <Open SDK>. 3. Click the [Browse ( button to select the *.cap file from the user folder.

  • Page 138: Appendix

    SPECIFICATION Description Items SNB-6003 SNB-6004 SND-6083 SND-6084 1/2.8” PS Exmor 2.38M CMOS Imaging Device 1952(H) x 1116(V) Total Pixels 1944(H) x 1104(V) Effective Pixels Scanning System Progressive Color : 0.1 Color : 0.1 Lux Color : 0.1 Lux Color : 0.1 Lux...
  • Page 139 Schedule Schedule Schedule Schedule Backlight Off / BLC Compensation Wide Dynamic Range 120dB Contrast Enhancement SSDR (Samsung Super Dynamic Range) (Off / On) Digital Noise SSNRIII (2D+3D Noise Filter) (Off / On) Reduction Operational Digital Image Off / On Stabilization...
  • Page 140 Selectable (Mic IN/Line IN), Max output level: 1 Vrms Audio In Supply voltage: 2.5VDC(4mA), Input impedance: approx. 2K Ohm Audio out Line out (3.5mm stereo mini jack) RS-485 - Samsung-T/E, Pelco-D/P, Operational Sungjin, Panasonic, Honeywell, AD, Serial Interface Vicon, GE, Bosch...
  • Page 141 Description Items SNB-6003 SNB-6004 SND-6083 SND-6084 H.264 : CBR or VBR Bitrate Control Method Motion JPEG : VBR Multiple Streaming (Up to 10 Profiles) Streaming Capability G.711 µ-law /G.726 Selectable Audio Compression G.726 (ADPCM) 8KHz, G.711 8KHz Format G.726 : 16Kbps, 24Kbps, 32Kbps, 40Kbps...
  • Page 142 Description Items SNB-6003 SNB-6004 SND-6083 SND-6084 English, French, German, Spanish, Italian, Chinese, Korean, Russian, Japanese, Swedish, Denish, Portuguese, Czech, Polish, Turkish, Webpage Language Rumanian, Serbian, Dutch, Croatian, Hungarian, Greek, Norway, Finland Supported OS : Windows XP / VISTA / 7 / 8, MAC OS X 10.7 Supported Browser : Microsoft Internet Explorer (Ver.

  • Page 143: Product Overview

    PRODUCT OVERVIEW SNB-6003 Unit : mm (inch) 136.2(5.36") 73.1(2.88") Ø 6.5 HOLE (Ø 0.26") Ø 1/4'-20 UNC-2B 14 (0.55") 56.1 (2.21") English _143...
  • Page 144 appendix SNB-6004 Unit : mm (inch) 147.8(5.82") 73.1(2.88") Ø 6.5 HOLE (Ø 0.26") Ø 1/4'-20 UNC-2B 14 (0.55") 67.7 (2.67") 144_ appendix...
  • Page 145 SND-6083/SND-6084 Unit : mm (inch) Ø 132.1 (5.2") Ø 97 (3.82") English _145...

  • Page 146: Troubleshooting

    appendix TROUBLESHOOTING PROBLEM SOLUTION y Check to make sure that the camera’s Network settings are appropriate. y Check to make sure that all network cables have been connected properly. y If connected using DHCP, verify that the camera is able to acquire I can’t access the camera from a web browser.
  • Page 147 PROBLEM SOLUTION y Yes, it can be. You can set rules for events despite of the intelligent Can I define event rules even when I don’t use <Motion video analysis setting. detection / Video analytics>? No signal is found at the Alarm y Check alarm output port settings.

  • Page 148: Open Source Announcement

    Corresponding Source code from us for a period of three years after our last shipment of this product by sending email to help.cctv@samsung.com. If you want to obtain the complete Corresponding Source code in the physical medium such as CD-ROM, the cost of physically performing source distribution might be charged.

  • Page 149: Gnu General Public License

    The “Program”, below, refers to any such program or GNU GENERAL PUBLIC LICENSE work, and a “work based on the Program” means either Version 2, June 1991 the Program or any derivative work under copyright law : that is to say, a work containing the Program or a portion Copyright (C)1989, 1991 Free Software Foundation, Inc.
  • Page 150 3. You may copy and distribute the Program (or a work 7. If, as a consequence of a court judgment or allegation of based on it, under Section 2)in object code or executable patent infringement or for any other reason (not limited to form under the terms of Sections 1 and 2 above provided patent issues), conditions are imposed on you (whether that you also do one of the following :...
  • Page 151 You should also get your employer (if you work as a NO WARRANTY programmer)or your school, if any, to sign a “copyright 11. BECAUSE THE PROGRAM IS LICENSED FREE OF disclaimer” for the program,if necessary. Here is a sample ; CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, alter the names: TO THE EXTENT PERMITTED BY APPLICABLE LAW.
  • Page 152 Finally, every program is threatened constantly by software The “Corresponding Source” for a work in object code patents. States should not allow patents to restrict form means all the source code needed to generate, install, development and use of software on general-purpose and (for an executable work) run the object code and to omputers, but in those that do, we wish to avoid the special modify the work, including scripts to control those activities.
  • Page 153 5. Conveying Modified Source Versions. d) Convey the object code by offering access from a designated place (gratis or for a charge), and offer You may convey a work based on the Program, or the equivalent access to the Corresponding Source in modifications to produce it from the Program, in the form of the same way through the same place at no further source code under the terms of section 4, provided that you...
  • Page 154 7. Additional Terms. However, if you cease all violation of this License, then your license from a particular copyright holder is reinstated (a) “Additional permissions” are terms that supplement the provisionally, unless and until the copyright holder explicitly terms of this License by making exceptions from one or more and finally terminates your license, and (b) permanently, if of its conditions.
  • Page 155 In the following three paragraphs, a “patent license” is any 14. Revised Versions of this License. express agreement or commitment, however denominated, The Free Software Foundation may publish revised and/ or not to enforce a patent (such as an express permission new versions of the GNU General Public License from time to to practice a patent or covenant not to sue for patent time.
  • Page 156 OpenSSL Combined License The OpenSSL toolkit stays under a dual license, i.e. both the conditions of the OpenSSL License and the original SSLeay license apply to the toolkit. See below for the actual license texts. Actually both licenses are BSD-style Open Source licenses. In case of any license issues related to OpenSSL please contact openssl-core@openssl.org.
  • Page 157 SNMP v1, SNMP v2c provided with the distribution. and SNMP v3 using both IPv4 and IPv6. For more additional information, send email to help.cctv@samsung.com. 3. All advertising materials mentioning features or use of this software must display the following acknowledgement:...
  • Page 158 3. Neither the name of the Regents of the University of 3. Neither the name of Thomas BERNARD nor the names California nor the names of its contributors may be used of its contributors may be used to endorse or promote to endorse or promote products derived from this software products derived from this software without specific prior without specific prior written permission.
  • Page 159 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR MERCHANTABILITY AND FITNESS FOR A PARTICULAR...
  • Page 160 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT THIS SOFTWARE IS PROVIDED BY APPLE AND ITS HOLDERS AND CONTRIBUTORS “AS IS” AND ANY CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED EXPRESS OR IMPLIED WARRANTIES, INCLUDING, WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF IMPLIED WARRANTIES OF MERCHANTABILITY AND MERCHANTABILITY AND FITNESS FOR A PARTICULAR...
  • Page 161 Copyright (c) 2006 Free Software Foundation, Inc. Mozilla Public License Since we, at Samsung Techwin, used the Mozilla Firefox component without modifying the source code according to the MOZILLA Public license 1.1, we are not obliged to provide the source code of the corresponding component.
  • Page 162 1.11. ‘’Source Code’’ means the preferred form of the Covered (d) Notwithstanding Section 2.2(b) above, no patent license is Code for making modifications to it, including all modules it granted: 1) for any code that Contributor has deleted from contains, plus any associated interface definition files, scripts the Contributor Version;...
  • Page 163 3.5. Required Notices. You must duplicate the notice in Exhibit 6.2. Effect of New Versions. Once Covered Code has been A in each file of the Source Code. If it is not possible to put published under a particular version of the License, You may such notice in a particular Source Code file due to its structure, always continue to use it under the terms of that version.
  • Page 164 8.3. If You assert a patent infringement claim against Participant 13. MULTIPLE-LICENSED CODE. alleging that such Participant’s Contributor Version directly or Initial Developer may designate portions of the Covered Code indirectly infringes any patent where such claim is resolved as Multiple-Licensed. Multiple-Licensedmeans that the Initial (such as by license or settlement) prior to the initiation of patent Developer permits you to utilize portions of the Covered Code infringement litigation, then the reasonable value of the licenses...
  • Page 165 The Independent JPEG Group’s JPEG Software The software included in this product contains copyrighted software that is licensed under the JPEG license. • JPEG license - Code project – Generating Outline OpenGL, Libjpeg This distribution contains the sixth public release of the Permission is NOT granted for the use of any IJG author’s Independent JPEG Group’s free JPEG software.
  • Page 166 T-Kernel License - This Product uses the Source Code of T-Kernel under T-License granted by the T-Engine Forum(www.t-engine.org) T-License [License Agreement for Source Code of T-Kernel] established by T-Engine Forum on January 23, 2004 revised on June 17, 2004 revised on December 21, 2006 revised on March 24, 2009 Article 1.
  • Page 167 Article 4. License of Source Code 4. The Distributor of Modification shall determine the name of the Modified Source Code subject to the rules separately 1. As provided for in this Article, T-Engine Forum shall established by T-Engine Forum and publish an appropriate provide, and grant a license to use, the Source Code free notice as required by the rules on the Patch for Modification of charge to any person who has taken the necessary...
  • Page 168 T-Kernel. Provided, however, that the Ported Source Code Article 9. Indemnity may be treated in the same way as the Modified Source Code until the time of registration hereunder. 1. Neither T-Engine Forum nor the copyright holder of the Source Code shall be liable for any damages (including, 5.
  • Page 169 authorized to submit on behalf of the copyright owner. For the 5. Submission of Contributions. Unless You explicitly state purposes of this definition, "submitted" means any form of otherwise, any Contribution intentionally submitted for electronic, verbal, or written communication sent to the Licensor inclusion in the Work by You to the Licensor shall be under the terms and conditions of this License, without any additional or its representatives, including but not limited to communication...
  • Page 170 BZip2 License This program, "bzip2", the associated library "libbzip2", and all documentation, are copyright (C) 1996-2007 Julian R Seward. All rights reserved. Component Name License bzip2-1.0.5 BZip2 http://www.bzip.org/ Redistribution and use in source and binary forms, with THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS or without modification, are permitted provided that the IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, following conditions are met:...
  • Page 171 PHP 3.01 License The PHP License, version 3.01 Copyright (c) 1999 - 2010 The PHP Group. All rights reserved. Component Name License php-5.2.17 PHP 3.01 http://www.php.net/distributions Redistribution and use in source and binary forms, with or Redistributions of any form whatsoever must retain the without modification, is permitted provided that the following following acknowledgment: "This product includes PHP conditions are met:...
  • Page 172 Samsung Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products.
  • Page 174 SAMSUNG TECHWIN AMERICA Inc. SAMSUNG TECHWIN EUROPE LTD. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Samsung House, 1000 Hillswood Drive, Hillswood Business Toll Free : +1-877-213-1222 Direct : +1-201-325-6920 Park Chertsey, Surrey, UNITED KINGDOM KT16 OPS Fax : +1-201-373-0124 TEL : +44-1932-45-5300 FAX : +44-1932-45-5325 www.samsungcctvusa.com...

This manual is also suitable for:

Snd-6083Snb-6004Snd-6084Snb-600

Table of Contents