hit counter code
D-Link DSL-504T Manual
  1. Manuals
  2. Brands
  3. D-Link Manuals
  4. Network Router
  5. DSL-504T
  6. Manual

D-Link DSL-504T Manual

Hide thumbs Also See for DSL-504T:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Configuration Manual, User Manual

Advertisement

Table of Contents
loading

Related Manuals for D-Link DSL-504T

Summary of Contents for D-Link DSL-504T

  • Page 2: Table Of Contents

    Installation Requirements .................. 6 Information you will need from your ADSL service provider ......8 Information you will need about your DSL-504T ADSL service router ....9 Information you will need about your LAN or computer ........10 Introduction ..................... 11 Features and Benefits ..................
  • Page 3 Table of Contents DSL-504T User’s Manual Advanced Settings ................... 60 Tools ........................ 72 Status ......................79 Multiple Virtual Connections ................83 Technical Specifications .................. 85 Appendix A: IP Address Setup ................. 87 Appendix B: IP Concepts ................. 90 Appendix C: Microfilters & Splitters ..............93 Contacting Technical Support ................

  • Page 4: Package Contents

    Package Contents DSL-504T User’s Manual Package Contents D-Link DSL-504T ADSL Ethernet Router One twisted-pair telephone cable used for ADSL connection One straight-through Ethernet cable Manual on CD Quick Installation Guide One AC power adapter If any of the above items are missing, please contact your reseller.

  • Page 5: Installation Overview

    DSL-504T User’s Manual Installation Overview The procedure to install the Router can be described in general terms in the following steps: Gather information and equipment needed to install the device. Before you begin the actual installation make sure you have all the necessary information and equipment.

  • Page 6: Installation Requirements

    Operating Systems The DSL-504T uses an HTML-based web interface for setup and management. The web configuration manager may be accessed using any operating system capable of running web browser software, including Windows 98 SE, Windows ME, Windows 2000, and Windows XP.
  • Page 7 DSL-504T User’s Manual Additional Software It may be necessary to install software on your computer that enables the computer to access the Internet. Additional software must be installed if you are using the device a simple bridge. For a bridged connection, the information needed to make and maintain the Internet connection is stored on another computer or gateway device, not in the Router itself.

  • Page 8: Information You Will Need From Your Adsl Service Provider

    DSL-504T User’s Manual Information you will need from your ADSL service provider Username This is the Username used to log on to your ADSL service provider’s network. It is commonly in the form - user@isp.com. Your ADSL service provider uses this to identify your account.

  • Page 9: Information You Will Need About Your Dsl-504T Adsl Service Router

    IP address used for DHCP service on the LAN when DHCP is enabled. Subnet This is the subnet mask used by the DSL-504T, and will be used Mask for throughout your LAN. The default subnet mask is 255.255.255.0. This can be changed later.

  • Page 10: Information You Will Need About Your Lan Or Computer

    If your computer has an Ethernet NIC, you can connect the DSL-504T to this Ethernet port using an Ethernet cable. You can also use the Ethernet port on the DSL-504T to connect to other Ethernet devices, such as a Wireless Access Point.

  • Page 11: Introduction

    ADSL technology enables many interactive multi-media applications such as video conferencing and collaborative computing. The Router is easy to install and use. The DSL-504T connects to computers or an Ethernet LAN via a standard Ethernet interface. The ADSL connection is made using ordinary twisted-pair telephone line with standard connectors.

  • Page 12: Features And Benefits

    DSL-504T User’s Manual Features and Benefits Features and Benefits The DSL-504T ADSL Router utilizes the latest ADSL enhancements to provide a reliable Internet portal suitable for most small to medium sized offices. DSL-504T advantages include: PPP (Point-to-Point Protocol) Security – The...
  • Page 13 Telnet enables a network manager to access the Router’s management software remotely. Easy Installation – The DSL-504T uses a web-based graphical user interface program for convenient management access and easy set up. Any Web browser, that meets the minimum requirements, can be used to manage the Router.

  • Page 14: Standards Compatibility & Compliance

    DSL-504T User’s Manual Standards Compatibility & Compliance Standards Compatibility & Compliance The DSL-504T complies with or is compatible with the following standards as recognized by their respective agencies. · ITU G.992.2 (G.lite, “splitterless ADSL”) compliant · ITU-T Rec. I.361 compliant ·...
  • Page 15 Standards Compatibility & Compliance DSL-504T User’s Manual · Supports NAPT for up to 4096 connections · Supports DHCP for up to 253 hot connections · Supports IGMP · Supports ATM Forum UNI 3.1/4.0 · Supports ATM VCC (Virtual Channel Circuit) for up to eight sessions ·...

  • Page 16: Front Panel Display

    DSL-504T User’s Manual Front Panel Display Front Panel Display Place the Router in a location that permits an easy view of the LED indicators on the front panel. The LED indicators on the front panel include the Power, Status, ADSL and WLAN and Ethernet (1-4) Link/Act indicators.

  • Page 17: Rear Panel Connections

    Rear Panel Connections DSL-504T User’s Manual Rear Panel Connections All cable connections to the Router are made at the rear panel. Connect the power adapter here to power on the Router. Use the Reset button to restore the settings to the factory default values.

  • Page 18: Hardware Installation

    DSL-504T User’s Manual Hardware Installation The DSL-504T maintains five separate interfaces, four Ethernet and one ADSL interface. Place the Router in a location where it can be safely connected to the various devices as well as to a power source. The Router should not be located where it will be exposed to moisture or excessive heat.

  • Page 19: Power On Router

    Power On Router DSL-504T User’s Manual Power On Router CAUTION: The Router must be used with the power adapter included with the device. To power on the Router: 1. Insert the AC Power Adapter cord into the power receptacle located on the rear panel of the Router and plug the adapter into a suitable nearby power source.

  • Page 20: Network Connections

    Wired Network Connections DSL-504T User’s Manual Network Connections Network connections are provided through the ADSL port and the four Ethernet ports on the back of the Router. See the Rear Panel diagram and the illustrations below for examples. Connect ADSL Line Use the ADSL cable included with the Router to connect it to a telephone wall socket or receptacle.
  • Page 21 DSL-504T User’s Manual Wired Network Connections Hub or Switch to Router Connection Connect the Router to an uplink port (MDI-II) on an Ethernet hub or switch with a straight-through cable as shown in the diagram below: If you wish to reserve the uplink port on...

  • Page 22: Basic Router Configuration

    Basic Router Configuration DSL-504T User’s Manual Basic Router Configuration The first time you setup the Router it is recommended that you configure the WAN connection using a single computer making sure that both the computer and the Router are not connected to the LAN. Once the WAN connection is functioning properly, you may continue to make changes to Router configuration including IP settings and DHCP setup.
  • Page 23 DSL-504T User’s Manual Basic Router Configuration If you are using this Router to provide Internet access for more than one computer, you can use these instructions later to change the IP settings for the other computers. However, you cannot use the same IP address since every computer must have its own IP address that is unique on the local network.
  • Page 24 DSL-504T User’s Manual Basic Router Configuration In the General tab of the Local Area Connection Properties menu, highlight Internet Protocol (TCP/IP) under “This connection uses the following items:” by clicking on it once. Click on the Properties button. Select “Obtain an IP address automatically” by clicking once in the circle.
  • Page 25 Basic Router Configuration DSL-504T User’s Manual Your computer is now ready to use the Router’s DHCP server. Windows 2000 First, check for the IP protocol and, if necessary, install it: 1. In the Windows task bar, click the Start button, point to Settings, and then click Control Panel.
  • Page 26 DSL-504T User’s Manual Basic Router Configuration Windows ME First, check for the IP protocol and, if necessary, install it: 1. In the Windows task bar, click the Start button, point to Settings, and then click Control Panel. 2. Double-click the Network and Dial-up Connections icon.
  • Page 27 DSL-504T User’s Manual Basic Router Configuration Windows 98 First, check for the IP protocol and, if necessary, install it: 1. In the Windows task bar, click the Start button, point to Settings, and then click Control Panel. Double-click the Network icon.
  • Page 28 Basic Router Configuration DSL-504T User’s Manual Windows NT 4.0 Workstations First, check for the IP protocol and, if necessary, install it: 1. In the Windows NT task bar, click the Start button, point to Settings, and then click Control Panel.

  • Page 29: Access The Configuration Manager

    DSL-504T User’s Manual Access the Configuration Manager Access the Configuration Manager Now that your computer’s IP settings allow it to communicate with the Router, you can access the configuration software. Be sure that the web browser on your computer is not configured to use a proxy server in the Internet settings.

  • Page 30: Login To The Home Page

    DSL-504T User’s Manual Login to Home Page Login to Home Page To use the web-based management software, launch a suitable web browser and direct it to the IP address of the Router. Type in http:// followed by the default IP address, 192.168.1.1 in the address bar of the browser.

  • Page 31: Configure The Router

    DSL-504T User’s Manual Configure the Router Configure the Router When you successfully connect to the Web manager, the Home directory tab will display the Setup Wizard menu. You can launch the Setup Wizard from this page or use the menu buttons located in the left panel of the web page to view other menus used for basic configuration.
  • Page 32 Configure the Router DSL-504T User’s Manual Directory Configuration and Read-only Menus Home Click the Home tab to access the Setup Wizard, LAN setup, WAN Configuration, LAN IP Configuration, DHCP for the LAN Setup and DNS Configuration menus. Advanced Click the Advanced tab to access the Virtual Server, Filters, Routing, DMZ, Firewall, RIP, PPP, ADSL, ATM VCC menus.

  • Page 33: Using The Setup Wizard

    Using the Setup Wizard DSL-504T User’s Manual Using the Setup Wizard To use the Setup Wizard, click the Run Wizard button in the first browser window and follow the instructions in the pop-up window that appears. Set a password that is required to make changes to the configuration settings of the Router in the Advanced Configurations menus.
  • Page 34 Using the Setup Wizard DSL-504T User’s Manual Set the system time of the Router. Choose the time zone you are in from the pull-down menu and click Next. If you wish to return to the previous menu during the setup process, click the Back button.

  • Page 35: Dynamic Ip Address

    Using the Setup Wizard DSL-504T User’s Manual Dynamic IP Address You will need to select the Internet Connection Type. If you are unsure which type of Internet Connection you have, please contact your Internet Service Provider. There are four connection modes and settings vary depending on the connection type.
  • Page 36 Using the Setup Wizard DSL-504T User’s Manual Dynamic IP Address (continued) VPI or VCI: Do not change the VPI or VCI value unless you have been told to do so. These numbers are used to define a unique path for your connection.

  • Page 37: Finding The Mac Address

    DSL-504T User’s Manual Using the Setup Wizard Finding the MAC address For Windows XP/2000: Start>Run >cmd >OK In the command prompt, type in ipconfig/all. The physical address is the MAC address of the computer For Windows ME: Start>Run>command>OK In the command prompt, type in ipconfig/all. The physical address is the MAC address of the computer.

  • Page 38: Static Ip Address

    Using the Setup Wizard DSL-504T User’s Manual Static IP Address Connection Type: Select the Connection Type for the Internet. Next: Click Next to proceed. D-Link Systems, Inc.
  • Page 39 Using the Setup Wizard DSL-504T User’s Manual Static IP Address (continued) The addresses displayed in this window are only examples, your addresses may be different. Please see the following page for an explanation of the fields shown on this screen.
  • Page 40 Using the Setup Wizard DSL-504T User’s Manual Static IP Address (continued) VPI or VCI: Do not change the VPI or VCI value unless you have been told to do so. These numbers are used to define a unique path for your connection.
  • Page 41 Using the Setup Wizard DSL-504T User’s Manual PPPoE/PPPoA Connection Type: Select the Connection Type for the Internet. Click Next: Click Next to proceed. D-Link Systems, Inc.
  • Page 42 DSL-504T User’s Manual Using the Setup Wizard PPPoE/PPPoA (continued) User Name & Type in the account User Name and Password. Your ISP has given Password: this information to you. VPI or VCI: Do not change the VPI or VCI value unless you have been told to do so.

  • Page 43: Bridge Mode

    Using the Setup Wizard DSL-504T User’s Manual Bridge Mode Connection Type: Select the Connection Type for the Internet. Click Next: Click Next to proceed. D-Link Systems, Inc.
  • Page 44 Using the Setup Wizard DSL-504T User’s Manual Bridge Mode (continued) Do not change the VPI or VCI value unless you have been told to do VPI or VCI: so. These numbers are used to define a unique path for your connection.

  • Page 45: Completing The Setup Wizard

    Using the Setup Wizard DSL-504T User’s Manual Completing the Setup Wizard Click Restart to save the new configuration settings and restart the Restart: DSL-504T. If you need to change settings from a previous menu, click the Back Back: button. Exit: When the router has completed rebooting it will take you to the main page of the web management menu.

  • Page 46: Configuring The Wan Connection

    Configuring the WAN Connection DSL-504T User’s Manual Configuring the WAN Connection To configure the Router’s basic configuration settings without running the Setup Wizard, you can access the menus used to configure WAN, LAN, DHCP and DNS settings directly from the Home directory. To access the WAN Settings menu, click on the WAN link button on the left side of the first window that appears when you successfully access the web manager.
  • Page 47 DSL-504T User’s Manual Configuring the WAN Connection Dynamic IP Address for WAN Follow the instructions below to configure the Router to use a dynamic IP address for the Internet connection. Make sure you have all the necessary information before you configure the WAN connection.
  • Page 48 Configuring the WAN Connection DSL-504T User’s Manual Dynamic IP Address for WAN (continued) ATM VC Settings: The ATM VC Settings at the top of the menu should not be changed unless you have been instructed to change them. However, if you...

  • Page 49: Static Ip Address For Wan

    Configuring the WAN Connection DSL-504T User’s Manual Static IP Address for WAN When the router is configured to use static IP address assignment for the WAN connection, you must manually assign a global IP address, subnet mask and gateway IP address used for the WAN connection. Most users will also configure DNS server IP settings in the DNS settings configuration menu (see below).
  • Page 50 To Save & Reboot the Router, click on the Tools directory tab and then click the Misc menu button. In the Misc Settings menu, click the Reboot button under Force the DSL-504T to system restart. The Router will save the new settings and restart. Upon restarting the Router will automatically establish the WAN connection D-Link Systems, Inc.

  • Page 51: Pppoe And Pppoa Connection For Wan

    Configuring the WAN Connection DSL-504T User’s Manual PPPoE and PPPoA Connection for WAN Follow the instructions below and on the next page to configure the Router to use a PPPoE or PPPoA for the Internet connection. Make sure you have all the necessary information before you configure the WAN connection.
  • Page 52 To Save & Reboot the Router, click on the Tools directory tab and then click the Misc menu button. In the Misc Settings menu, click the Reboot button under Force the DSL-504T to system restart. The Router will save the new settings and restart. Upon restarting the Router will automatically establish the WAN connection D-Link Systems, Inc.

  • Page 53: Bridged Connection For Wan

    DSL-504T User’s Manual Configuring the WAN Connection Bridged Connection for WAN For Bridged connections it will be necessary for most users to install additional software on any computer that will connect to the Router for Internet access. The additional software is used for the purpose of identifying and verifying your account, and then granting Internet access to the computer requesting the connection.
  • Page 54 To Save & Reboot the Router, click on the Tools directory tab and then click the Misc menu button. In the Misc Settings menu, click the Reboot button under Force the DSL-504T to system restart. The Router will save the new settings and restart. Upon restarting the Router will automatically establish the WAN connection D-Link Systems, Inc.

  • Page 55: Lan Ip Settings

    LAN IP Settings DSL-504T User’s Manual LAN IP Settings You can configure the LAN IP address to suit your preference. Many users will find it convenient to use the default settings together with DHCP service to manage the IP settings for their private network. The IP address of the Router is the base address used for DHCP.

  • Page 56: Dhcp Server Settings For The Lan

    DSL-504T User’s Manual DHCP Server Settings for the LAN DHCP Server Settings for the LAN The DHCP server is enabled by default for the router’s Ethernet LAN interface. DHCP service will supply IP settings to computers configured to automatically obtain IP settings that are connected to the router though the Ethernet port.
  • Page 57 To Save & Reboot the Router, click on the Tools directory tab and then click the Misc menu button. In the Misc Settings menu, click the Reboot button under Force the DSL-504T to system restart. The Router will save the new settings and restart. Upon restarting the Router will automatically establish the WAN connection D-Link Systems, Inc.

  • Page 58: Dns Server Settings

    DNS Server Settings DSL-504T User’s Manual DNS Server Settings The router can be configured to relay DNS from your ISP or another available service to workstations on your LAN. When using DNS relay, the router will accept DNS requests from hosts on the LAN and forward them to the ISP (or alternative) DNS servers. DNS relay can use auto discovery or the DNS IP address can be manually entered by the user.
  • Page 59 DNS Server Settings DSL-504T User’s Manual DNS Server Settings (continued) DNS Relay In the pulldown menu, select either Use Auto Discovery, Use User Selection: Configured or Disable DNS relay. If you have not been given specific DNS server IP addresses or if the router is not pre-configured with DNS server information, select the Auto Discover option for DNS relay.

  • Page 60: Advanced Settings

    Virtual Server can allow remote users to access services on your LAN such as FTP for file transfers or SMTP and POP3 for e-mail. The DSL-504T will accept remote requests for these services at your Global IP Address, using the specified TCP or UDP protocol and port number, and then redirect these requests to the server on your LAN with the Private IP address you specify.
  • Page 61 DSL-504T User’s Manual Advanced - Virtual Server DSL-G504T User’s Manual Advanced - Virtual Server (continued) To configure a virtual server set, define the following settings in the Virtual Server configuration menu located in the top half of the browser window.
  • Page 62 DSL-504T User’s Manual Advanced - Filters Advanced - Filters Filter rules in the Router are put in place to allow or block specified traffic. The Filter Rules however can be used in a single direction to examine and then Allow or Deny traffic for Inbound (WAN to LAN) or Outbound (LAN to WAN) routed data.
  • Page 63 Advanced - Filters DSL-504T User’s Manual Advanced - Filters (continued) The parameters described below are used to set up filter rules Parameter Description Source IP For an Outbound Filter, this is the IP address or IP addresses on your LAN for which you are creating the filter rule. For an Inbound Filter, this is the IP address or IP addresses for which you are creating the filter rule.
  • Page 64 Advanced - Static Routing DSL-504T User’s Manual Advanced - Static Routing Use Static Routing to specify a route used for data traffic within your Ethernet LAN or to route data on the WAN. This is used to specify that all packets destined for a particular network or subnet use a predetermined gateway.
  • Page 65 Advanced - DMZ DSL-504T User’s Manual Advanced - DMZ Since some applications are not compatible with NAT, the Router supports use of a DMZ IP address for a single host on the LAN. This IP address is not protected by NAT and will therefore be visible to agents on the Internet with the right type of software.
  • Page 66 Advanced - Firewall DSL-504T User’s Manual Advanced - Firewall The Firewall Configuration menu allows the Router to enforce specific predefined policies intended to protect against certain common types of attacks. There are two general types of protection (DoS and Port Scan) that can be enabled on the Router, as well as filtering for specific packet types sometimes used by hackers.
  • Page 67 Advanced - Firewall DSL-504T User’s Manual Advanced-Firewall (continued) When DoS, Port Scan, or Service Filtering Protection is enabled, it will create a firewall policy to protect your network against the following: Dos Protection Port Scan Protection Service Filtering SYN Flood check...
  • Page 68 Advanced - RIP DSL-504T User’s Manual Advanced - RIP The Router supports RIP v1 and RIP v2 used to share routing tables with other Layer 3 routing devices on your local network or remote LAN. To enable RIP, select Enabled from the RIP pull-down menu, select the Protocol (RIPv1, RIPv2 and RIPv1 Compatible) and Direction (In, Out, or Both), and click Apply.
  • Page 69 Advanced - PPP DSL-504T User’s Manual Advanced - PPP View the status of the PPP connection (Point to Point Protocol) in this window. D-Link Systems, Inc.
  • Page 70 Advanced - PPP DSL-504T User’s Manual Advanced - ADSL Select the ADSL modulation type in this window. D-Link Systems, Inc.
  • Page 71 Advanced - RIP DSL-504T User’s Manual Advanced - ATM VC The ATM Virtual Circuit connection menu is used to configure the WAN connection. If you are using multiple PVCs, you can change the configuration of any PVC in this menu. To create new or additional PVCs, read the section below on Multiple PVCs.

  • Page 72: Tools

    DSL-504T User’s Manual Tools-Admin Tools - Admin Click the Tools tab to reveal the menu buttons for various functions located in this directory. These menus are used to change the system password used to access the web manager, to save or load Router configuration settings, upgrade the device firmware, save current configuration settings, restore default settings, and to perform miscellaneous actions such performing Ping tests.
  • Page 73 DSL-504T User’s Manual Tools-Admin Tools - Admin (continued) Enable Remote Web Management and Telnet Access The Administrator Settings menu (see above) is also used to enable remote Telnet management and remote web management access to the Router. To enable remote...
  • Page 74 DSL-504T User’s Manual Tools - Time Tools - Time The Router provides a number of options to maintain current date and time including SNTP. To configure system time on the Router, select the method used to maintain time. The options available include SNTP, using your computer’s system clock (default) or set the time and date manually.
  • Page 75 DSL-504T User’s Manual Tools - System Tools - System Save Configuration File to PC Once you have configured the Router to your satisfaction, it is a good idea to back up the configuration file to your computer. Use the System Setting menu to save the existing configuration file to the hard drive of the system you are using to access the web manager.
  • Page 76 DSL-504T User’s Manual Tools - Firmware Tools - Firmware Performing a Firmware Upgrade can sometimes change the configuration settings. Be sure to back-up the Router’s configuration settings before upgrading the firmware. Loading saved config files from earlier firmware is not recommended.
  • Page 77 DSL-504T User’s Manual Tools - Misc Tools - Misc Other functions available in the Miscellaneous Configuration menu are a Ping test and IGMP enable/disable. Ping Test The Ping test functions on the WAN and LAN interfaces. Type the IP address you want to check in the space provided and click the Ping button.
  • Page 78 Tools - Test DSL-504T User’s Manual Tools - Test This section provides connection information based on the Virtual Circuit that is selected. To view other Virtual Circuits, select from the drop down menu. D-Link Systems, Inc.

  • Page 79: Status

    Status - Device Info DSL-504T User’s Manual Status - Device Info Router Status Information Use the various read-only menus to view system information and monitor performance. Device Information Display Use the Device Information window to quickly view basic current information about the LAN and WAN interfaces.
  • Page 80 Status - Device Info DSL-504T User’s Manual Status - Log View, save and change log settings in this window. D-Link Systems, Inc.
  • Page 81 Status - Statistics DSL-504T User’s Manual Status - Statistics View statistics for either the Ethernet or the ADSL network here. D-Link Systems, Inc.
  • Page 82 Status - ADSL DSL-504T User’s Manual Status - ADSL View the ADSL statistics in this window. D-Link Systems, Inc.

  • Page 83: Multiple Virtual Connections

    Multiple Virtual Connections DSL-504T User’s Manual Multiple Virtual Connections The Router supports multiple virtual connections. Up to eight PVCs to eight separate destinations can be created and operated simultaneously utilizing the same bandwidth. Additional PVC connections can be added for various purposes. For example, you may want to establish a private connection to remote office in order to create an extended LAN, or setup a server on a separate connection.
  • Page 84 DSL-504T User’s Manual Multiple Virtual Connections In the example below, a new VC (Pvc2) has been added using the WAN Settings menu. The connection is setup as a bridged connection. The new VC appears listed in the ATM VC Setting menu located in the Advanced directory.

  • Page 85: Technical Specifications

    Technical Specifications DSL-504T User’s Manual Technical Specifications Standards ITU G.992.1 (G.dmt) Annex A RFC 1577 (IP over ATM) ITU G.992.2 (G.lite) Annex A RFC 1661 (PPP) ITU G.994.1 (G.Hs) RFC 1994 (CHAP) ITU-T Rec. I.361 RFC 1334 (PAP) ITU-T Rec. I.610 RFC 2364 (PPP over ATM) IEEE 802.3...
  • Page 86 Technical Specifications DSL-504T User’s Manual Technical Specifications (continued) Physical and Environmental DC Inputs Input: 100V ~240V AC 50 ~ 60Hz Power Adapter Output: 12V AC, 1.2A Power Consumption 12 Watts (max) Operating Temperature 0° to 40° C (32° - 104° F)

  • Page 87: Appendix A: Ip Address Setup

    Appendix A: IP Address Setup IP Address Setup The DSL-504T is designed to provide network administrators maximum flexibility for IP addressing on the Ethernet LAN. The easiest IP setup choice in most cases is to let the Router do it using DHCP, which is enabled by default. This appendix briefly describes various options including DHCP, used for IP setup on a LAN.
  • Page 88 App. A: IP Address Setup DSL-504T User’s Manual IP Address Setup (continued) Using Default IP without DHCP Host IP Address Subnet Mask Gateway IP Router 192.168.1.1 255.255.255.0 Computer #1 192.168.1.2 255.255.255.0 192.168.1.1 Computer #2 192.168.1.3 255.255.255.0 192.168.1.1 Computer #3 192.168.1.4 255.255.255.0 192.168.1.1...
  • Page 89 App. A: IP Address Setup DSL-504T User’s Manual IP Address Setup (continued) Alternative IP Assignment Host IP Address Subnet Mask Gateway IP Router 10.0.0.1 255.0.0.0 Computer #1 10.0.0.2 255.0.0.0 10.0.0.1 Computer #2 10.0.0.3 255.0.0.0 10.0.0.1 Computer #3 10.0.0.4 255.0.0.0 10.0.0.1 IP Setup - Example #2 These two examples are only examples you can use to help you get started.

  • Page 90: Appendix B: Ip Concepts

    App.B: IP Concepts DSL-504T User’s Manual Appendix B: IP Concepts This appendix describes some basic IP concepts, the TCP/IP addressing scheme and shows how to assign IP Addresses. When setting up the Router, you must make sure it has a valid IP address. Even if you will not use the WAN port (ADSL port), you should, at the very least, make sure the Ethernet LAN port is assigned a valid IP address.
  • Page 91 DSL-504T User’s Manual App. B: IP Concepts IP Concepts (continued) Note: All network addresses outside of these ranges (Class D and E) are either reserved or set aside for experimental networks or multicasting. When an IP address’s host portion contains only zero(s), the address identifies a network and not a host.
  • Page 92 DSL-504T User’s Manual App. B: IP Concepts IP Concepts (continued) It is recommended that you choose private network IP Addresses from the above list. For more information on address assignment, refer to RFC 1597, Address Allocation for Private Internets and RFC 1466, Guidelines for Management of IP Address Space.

  • Page 93: Appendix C: Microfilters & Splitters

    App. C: Microfilters and Splitters DSL-504T User’s Manual Appendix C: Microfilters & Splitters Most ADSL clients will be required to install a simple device that prevents the ADSL line from interfering with regular telephone services. These devices are commonly referred to as microfilters or sometimes called (inaccurately) line splitters. They are easy to install and use standard telephone connectors and cable.
  • Page 94 App. C: Microfilters and Splitters DSL-504T User’s Manual Microfilters and Splitters (continued) Line Splitter If you are instructed to use a “line splitter”, you must install the device between the Router and the phone jack. Use standard telephone cable with standard RJ-11 connectors.

  • Page 95: Contacting Technical Support

    Contacting Technical Support You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product. U.S. and Canadian customers can contact D-Link technical support through our web site, or by phone.

  • Page 96: Warranty

    D-Link’s sole obligation shall be to repair or replace the defective Hardware during the Warranty Period at no charge to the original owner or to refund at D-Link’s sole discretion. Such repair or replacement will be rendered by D-Link at an Authorized D-Link Service Office. The replacement Hardware need not be new or have an identical make, model or part.
  • Page 97 RMA number must be prominently marked on the outside of the package. Do not include any manuals or accessories in the shipping package. D-Link will only replace the defective portion of the Product and will not ship back any accessories.
  • Page 98 THE LIMITED WARRANTY PROVIDED HEREIN, THE ENTIRE RISK AS TO THE QUALITY, SELECTION AND PERFORMANCE OF THE PRODUCT IS WITH THE PURCHASER OF THE PRODUCT. Limitation of Liability: TO THE MAXIMUM EXTENT PERMITTED BY LAW, D-LINK IS NOT LIABLE UNDER ANY CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHER LEGAL OR EQUITABLE...

  • Page 99: Registration

    DSL-504T User’s Manual Registration Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. 121604 D-Link Systems, Inc.

Table of Contents