EN G L I S H BRUSHLESS CORDLESS IMPACT DRIVERS DCF825, DCF895 Congratulations! You have chosen a D WALT tool. Years of experience, thorough product development and innovation make WALT one of the most reliable partners for professional power tool users. Technical Data DCF825 DCF895...
E NG LI S H NOTICE: Indicates a practice not When operating a power tool outdoors, related to personal injury which, if use an extension cord suitable for outdoor not avoided, may result in property use. Use of a cord suitable for outdoor use damage.
EN G L I S H tool that cannot be controlled with the switch 6) SERVICE is dangerous and must be repaired. Have your power tool serviced by a Disconnect the plug from the power qualified repair person using only identical source and/or the battery pack from replacement parts.
E NG LI S H source. WARNING: Shock hazard. Do not allow any liquid to get inside charger. Electric shock may result. or plug — have them replaced immediately. CAUTION: Burn hazard. To reduce Do not operate charger if it has received the risk of injury, charge only D WALT a sharp blow, been dropped or otherwise...
EN G L I S H Refer to the table below for the state of charge of from the charger may ignite the dust or fumes. the battery pack. Never force the battery pack into charger. Do not modify the battery pack in any way State of charge to fit into a non-compatible charger as charging...
E NG LI S H Use only with D WALT battery packs. respiratory irritation. Provide fresh air. If Others may burst causing personal injury symptoms persists, seek medical attention. and damage. WARNING: Burn hazard. Battery liquid Do not expose to water. may be flammable if exposed to spark or flame.
EN G L I S H b. Forward/reverse control button When using a cable reel, always unwind the cable completely. c. Accessory release button d. 6.35 mm (1/4") hex chuck ASSEMBLY AND ADJUSTMENTS e. Battery release button WARNING: Prior to assembly and f.
Page 12
E NG LI S H To move belt hook or magnetic bit holder, remove To select reverse, release the trigger switch (a) and the screw (i) that holds it in place then reassemble depress the forward/reverse control button on the on the opposite side.
EN G L I S H may cause breakage and possible personal injury. 1. Place the socket on the fastener head. Keep Cleaning the tool pointed straight at the fastener. 2. Press switch to start operation. Release the WARNING: Blow dirt and dust out of switch to stop operation.
E NG LI S H Separate collection of used products and packaging allows materials to be recycled and used again. Re-use of recycled materials helps prevent environmental pollution and reduces the demand for raw materials. Local regulations may provide for separate collection of electrical products from the household, at municipal waste sites or by the retailer when you purchase a new product.
Page 23
DCF825 DCF895 WALT WALT 6.35 6.35 1.5 Ah 3.0 Ah...