Download Print this page

Black & Decker BDSM400 Quick Start Manual

Download this manual

BDSM400 QUICK START GUIDE

HOW TO:

Measure Room Dimensions:

1.) Use the "SET" key to set the datum to measure

from the "bottom" of the instrument.

2.) Tip the sonic transmitter to the forward (bent)

position.

3.) Move slide switch to distance measurement

position (far right).

4.) Turn the instrument on using the switch on the

rear.

5.) Place the unit against a wall - point at a clear

unobstructed opposite wall.

6.) Press either "read" button on the sides of the unit.

7.) The dimension will be displayed.

8.) Repeat for the opposite wall.

9.) To calculate area, press "X" after the first

measurement and "=" after the second.

Selecting the datum or measuring point.

"SET" Key

Part No. 624046-01

Page 1 BDSM400 QUICK START GUIDE HOW TO: Measure Room Dimensions: 1.) Use the “SET” key to set the datum to measure from the “bottom” of the instrument. 2.) Tip the sonic transmitter to the forward (bent) position. 3.) Move slide switch to distance measurement position (far right).
Page 2 GUIDE DE DÉMARRAGE RAPIDE DU BDSM400 COMMENT : Mesurer les dimensions d’une pièce 1) Utilisez la touche « SET » pour établir le point de référence afin de prendre la mesure à partir du « bas » de l’appareil. 2) Faites basculer l’émetteur sonique vers l’avant.